|
What tool to use to cut Plastic
specifically, the back of the speaker basket in my 95 civic.
also, it seems that my car uses 6.5" for the front , would i be able to fit a 5.25?? |
a box cutter swiss army knife leatherman? and you u made a bracket it will fit.
|
really a knife? i was thinking maybe a dremel tool or something...
a bracket? i was gonna bolt it down by 1 or two screws... :| - bad idea? |
glue it down? that would work, and if you have a sawzall that would prob work the best actually
|
Get a Dremel Multimax. Instead of a needle tool, it uses a fan-type blade that oscillates really quickly and cuts through thick plastic quick. Home Depot sells them.
|
|
no bandsaw?
cutoff disc on an angle grinder |
Metal blade (obviously made of steel, but the one used for sawing metal, not wood) from Home Depot.
|
Or................................ a hacksaw.
|
just go nuts and punch a whole through it
|
|
scissors? exacto naife?
|
Quote:
Plan A - the stupid speaker fits without any mods Plan B - rent a dremel tool n try a DIY Plan C - take it over to soundgood n call it a day .. |
grab a knife heat it up. it'll cut right through that basket like butter. i've done this way for all the civics i've worked on.
|
| All times are GMT -8. The time now is 07:13 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net