Oh i found this from another forum. Dude with same board and cpu. I'm not quite following what he's saying.
Quote:
0x124 is usually a problem with the CPU->IMC transactions, rather than the cpu cores themselves freezing up (core crashes are 0x101). Can also be caused by the IMC. 0x1E's can happen from that too. This can be caused by multiple things.
He can't use LLC 75% because that is ONLY on the Asus M4E. Gigabyte doesn't have %'s.
Set the BIOS to 1.25v and turn on LLC.
If you still get 124's, then the problem is strictly the RAM. You either need proper RAM (Gskill Ripjaws PC3 12800's 1.5v are a good start), or you need to manually change the RAM settings with your non certified RAM. What to change? I don't know. You can start by raising VTT to 1.2v, changing command rate to 2T, forcing the RAM down to 1333 mhz...bumping VCCSA up to 1.0v...I honestly don't know...
|