SFU Engineering
 

Hey, well I didn't get into UBC Engineering with an 86 so I'm going to SFU now. I'm going to try and transfer to UBC in my 2nd year.

Anyway anyone else going to SFU Engineering this Fall? Anyone in that program right now?

I need some help with my course selections. What courses should I take in the Fall, and what are some easy electives I can take?

I found this http://www.ensc.sfu.ca/courses/elect...tudies_post_06

What are some easy courses I can take? Thanks!

im currently in 2nd year going to 3rd hopefully soon lol. For first year courses, it was pretty much laid out for us. if im not wrong, for first semester, u are recommand to take math 150 or 151, cmpt 128, ensc 100 n 101, phy 120 ,and chem 121. however i took chem later on in the summer to reduce course load. hope this helps =] as for electives, you dont have much choices first sem. and there aree no easy electives for engineers. trust mee!

you could always just go to capilano, kwantlen or langara and do the first year program there then transfer to UBC the second year.

im not completely sure but i think the first year at SFU may not fully fulfill the first year requirements at UBC since SFU will logically assumes that if youre taking first year there, youre going to finish there.

anyways, i suggest you spend some time looking at the type of engineering you like (civil, mech, materials, bio, chemical, etc.) before making your choice because SFU and UBC are very different in that respect.

I think a better route would be going to BCIT rather than SFU.

.02 cents

ya I really didn't want to go to SFU at all. I don't like the engineering majors they have. I really wanted to go to UBC just because they have Civil Engineering. I'm just going to SFU because it's too late now.

So after first year I can't transfer to UBC?

You can but you are most likely going to be 1st year again at UBC

My friend transferred from SFU to UBC and she had to redo her 1st year at UBC because they wouldn't recognize her SFU courses.

Not sure the full detail on it but you can check if the courses you take from SFU or other Institutes (Kwantlen, Langara etc..) are transferable to UBC
http://www.bctransferguide.ca/

Wow that sucks... Why would anyone want to do that? I should have just gone to UBC-O lol.

I've met a few people (5-ish?) this past year in 2nd year UBC Engineering who transferred directly into their department from Langara. I don't know how it works, but it's definitely possible.

I also have a friend who was all set to transfer into UBC 2nd year Eng from Waterloo, but decided against it and went into UBC Sciences instead hah.

Also, if you want to transfer into UBC Eng. in the future, don't go to BCIT. Something about a lack of transferable courses.

I suggest setting an appointment with Engineering Student Services (its what my Waterloo friend did to set his plan up) so that you can learn first-hand how the transfer protocol works: http://www.engineering.ubc.ca/prospe...te/contact.php

ya if you plan on going to SFU or UBC engineering, they dont like BCIT at all. BCIT does have bridging programs to U of Vic and LU out east though.

since you're looking at civil engineering, I believe in my last issue of apegbc's monthly magazine they mentioned that BCIT's degree in civil engineering just got accredited, 1st school that isnt a university i believe, so you might want to look in to that if you know you want to be a civil engineer

You have to be strategic. Don't take all the courses they tell you to take just because they tell you to. You'll want to meet with the UBC advisor and find what courses included in the UBC curriculum have SFU equivalents decided already.

http://www.calendar.ubc.ca/vancouver...=12,195,272,33

For colleges, the information on what courses are transferrable is easily accessible. What you'll need to do is look up courses required by the UBC degree that have equivalents at a college:

http://www.bctransferguide.ca/institutions/ubc.cfm

Unfortunately, BC Transfer Guide doesn't do SFU -> UBC and UBC -> SFU. Just looking at it though, Kwantlen and Langara have many transferrable courses--it might be in your interests to go to Kwantlen or Langara instead of SFU, since they have courses recognized as equivalent. You'll save a bundle of cash as well. Search for the UBC course number and see if there is an equivalent... then take that.

You'll probably end up taking a bit more time to complete your degree, but for the coming year, you can really focus on performing well in the courses you plan to transfer, or get a part-time job.

hmm, i suppose my post wasn't clear enough but i want to get the point across that capilano, langara and kwantlen all have first year engineering transfer programs that TRANSFER DIRECTLY to ubc. if you go that route you'll end up in UBC second year engineering.

seriously, dont do an engineering discipline that youll hate just because you didnt get into your first choice of school. you will never find anything remotely related to civil engineering at sfu, ever.

This.

If you like mechanical, SFU has a bit of that in mechatronics now... but no, nothing close to civil here. Don't do electrical/systems/computer at SFU just because you got in here--first year will be fine, but come third year, you'll hate it. Circuits, circuits, circuits.

you sure it's not math math electromagnetics and math? :)

Hehe fine... 75% circuits, 25% electromagnetics, 25% math. Oh wait... :p

Thank you for all the replys.

What I meant about my transfer question was what if I wanted to transfer from SFU to UBC without going back to first year in UBC. That would be pointless.

Since July 31 is the last day i can drop classes and change stuff around, I was thinking I might drop CMPT 128 and just have my Math, Physics, and two English courses for my Fall term. Anyone know how important that CMPT course is, and can I take it another term?

Would having 4 classes be too little? Should I just keep it? I also don't think UBC has that CMPT course for their first year. I still havn't gotten an answer from UBC Engineering on what courses to take at SFU so I can transfer.

I've already mentioned that I've met kids who took 2nd year at UBC WITHOUT having taken first year here as well. Direct transfer IS, in fact, an option. Talk to a UBC advisor (you'll notice multiple people have suggested this) for the full details. Link in my previous post.

You can always take classes in another term. But be careful since classes may only he offered in one term per school year. You might just have to spread your first year over two years then.

As for only doing four classes...it really depends if you have been in school fairly recently and can get back into study mode right away. If you haven't then spreading out your first year over a couple of years is a good idea since it also gets you used to the "engineering mindset" that you'll need. But four courses is considered very little for engineering since seven courses is the norm. You might as well push yourself to do at least 5 or 6 courses now since you'll be much more used to the workload once you get into higher years.

I wish I had done that in my first year instead of taking it easy. If I had I would get this degree done a year or so faster than I currently am.
Posted via RS Mobile