![]() |
Quote:
|
Quote:
I mean if the police tracked him down later, and he said "I didn't know I had any involvement in an accident, my car doesn't have any damage" that wouldn't be a truthful answer? |
The fact that I was halfway down the block and then she hit something puzzled me. I am positive that when I turned I did not see her. If she saw me, why in the world did she try to swerve into the direction I was going and not in the open lane to the left... |
She also started swerving once she was half way into the intersection passed the lane where my car turned into. |
Quote:
|
Quote:
How would that calculation compensate? I mean, the vehicle is easy enough to know, but what about things like brakes/tyres? |
oh and also: I used to take nanaimo and 41st every day at a previous job. It's a pretty dangerous intersection. A LOT of ppl drive VERY fast on that stretch. HOWEVER, you should always be able to see the ppl coming down 41st, no matter how fast they're going. I've never had trouble and my car was really low at the time too. Again, I don't believe ICBC would find you at fault. There were no vehicle collisions. the speed that one travels (50km) is built so that one can see and react to unexpected situations. If she was driving 50k, she could've stopped without hitting that curb. God knows I've been in her shoes, but never hit anything. |
I drove this route today, eastbound on 41st. The uphill stretch starts just after Gladstone (one block west) and doesn't crest until just before Clarendon (one block east). Crossing Nanaimo, I could easily see all oncoming cars for over a block. There's no reason this woman shouldn't have seen the OP making the turn well in advance, unless she was seriously speeding, and/or not paying attention. |
Quote:
|
I did make a safe turn. My car was through the intersection and half way unto a block heading the opposite direction. I'm heading into ICBC right now, I'll keep y'all updated! |
Quote:
I've also seen where you can be braking right at the threshold of lockup, then hit a bump, rut, or something else that causes a slight loss of traction, which then causes the brakes to lock, and being at the threshold already, they don't release again once you get traction back. Just speculation, but it means that just because the skidmarks are "only" 15m, it doesn't mean she wasn't initially going a lot faster. As skidmark (the other one :)) says, it would really require a reconstruction specialist to fully make sense of it. |
Quote:
OP. what type of car was she driving? Was it a newer or an older model? I've had it happen to me before where I was on the edge of locking up the front brakes, and then I hit a bumpy section of road and the ABS kicks in and I don't fully stop until I am in the intersection. So I know what Soundy is saying about braking without locking up the wheels at a later time. |
Quote:
the car was more than a decade old. it was an old 94-95 mazda. |
So, what did ICBC say? |
was she hot? |
Not exactly the same situation as you but I'll throw it out there anyways. Friend was on a side street travelling Westbound and was trying to make a left hand turn Southbound onto Renfrew. At the intersection it was a Stop sign so like anybody else my friend stopped. Due to the parked cars on the street it's a little harder to see cars coming down Renfrew Northbound. There also was no traffic light at this intersection. He very slowly inched passed the stop sign and about maybe an inch or so of his car was into the intersection. Any car going Northbound on the right hand lane woudln't have been able to hit my friends car if you were just driving on the right lane as there was more then enough clearence for that car in their lane but because that car saw an inch of my friends car sticking out they freaked and swirved into a median. They were definately speeding and their car got pretty fucked up. My friend decided to go see if they were ok and they said their ok and everythings all good. Sometime later ICBC calls my friend and says sorry it's your fault because you were at a Stop sign and regardless of what happened you being passed the stop sign caused that person to crash. Didn't matter that they were speeding or just freaked out they pinned it 100% on my friend. |
^wow that totally sucks. Too bad there's no easy way to fight that |
^ were there witnesses for that or did he just admit that he was sticking out? I find it hard to believe they pinned it on him for sticking out an inch. Your supposed to stop at a stop sign and then inch forward if you can't see Posted via RS Mobile |
ICBC is pretty messed up sometimes... my first-ever accident, I was turning left into a store parking lot just past an intersection. A guy in a (must have been speeding) delivery van coming from behind me decided to pass on the left (despite it being a double line and with oncoming traffic) and smoked me halfway through my turn. ICBC decided it was 100% my fault... why? Because I was making an illegal U-turn, they said. When I asked how they came up with that, the adjuster asked if I was going to be going back in the same direction I came from. I said sure, after parking for a couple hours. He replied that that was a U-turn. |
Quote:
ICBC told my friend the rational is the fact that it was still because of my friends car sticking out that caused the other person to panic. They said it doesn't matter if you were a stop sign or not, the fact remained that it was your car that caused them to crash. FU ICBC |
it's okay to stick around, but why did you get her your info, ESPECIALLY your DL #? If you're not involved in the accident, you don't need to give anyone info unless you are witness, in which case you are not cause you didn't see shit, only the aftermath. As a witeness name and number is good enough, no need for DL info. |
All times are GMT -8. The time now is 09:52 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net