REVscene - Vancouver Automotive Forum

willystyle · 10-09-2010, 06:31 PM

Does anyone have this HDPVR terminal? if so, do you ever encounter an error message where it says ur PVR is full, but it's actually not, and you can't get out of that screen, unless you delete some files, but there's nothing to delete.

Is there a solution to this problem? Thanks!

terkan · 10-10-2010, 12:18 PM

unplug power for 30sec plug it back in viola

JaSoN_520 · 10-10-2010, 12:29 PM

No but I've gotten pvr unavailable a few times. It goes away after power cycle.

willystyle · 10-10-2010, 04:44 PM

It does go away after a powercycle; however, it comes back again in a week or two, and it gets annoying after you get the error message couple of times, cause you need to unplug and wait another 45 min or so for your box to download the TV guide.

johny · 10-10-2010, 06:39 PM

happend last night. PVR was at 0%. just powered off and on.

terkan · 10-10-2010, 07:08 PM

it's a problem with the code load that happened almost a week ago with the pace box. personally i think the pace box is a pos but ppl still buy it. anyways if you still have issue with it. post ur serial number here and i'll sap the box for you downloading the firmware again

Mr.HappySilp · 10-10-2010, 07:41 PM

We had so many issue with the PACE LOL. Is a shitty box. Is a lot better just to buy the DCT 3400 for like $100 more.

StylinRed · 10-11-2010, 04:28 AM

^^^^ that's what i figured

i've got a Pace with my own hardrive hooked up

had quite a few problems and noticed some areas where its lacking

+ i cant use my dvd recorder with the Pace... i keep getting "cant record copyrighted material" messages regardless of the channel time program (even paid programming/pbs etc) but i can use my vcr

with my motorola i can still use my dvd recorder

willystyle · 10-11-2010, 06:30 PM

I got my Pace for free, so I shouldn't be complaining TOO MUCH, but still, it gets really annoying.

I'll post my serial # if this issue occurs again. Thanks terkan!

Mr.HappySilp · 10-11-2010, 08:31 PM

lol doesn't matter. Is the box itself. Even the older model DCT 4616 is better than PACE.

iwantaskyline · 10-15-2010, 05:28 PM

bypass your powerbar if possible.

willystyle · 10-16-2010, 12:37 AM

Quote:

Originally Posted by iwantaskyline

bypass your powerbar if possible.

How would that make a difference?

iwantaskyline · 10-16-2010, 04:34 AM

Quote:

Originally Posted by willystyle

How would that make a difference?

powerbars can have changes in voltages which can cause the hardrive to malfunction. not saying it will fix it for sure but it might make a difference.

terkan · 10-16-2010, 05:46 PM

and powerbar can coz interference with rf

willystyle · 10-17-2010, 05:06 PM

Ok, I'll switch it.

I just realized that this error only occurs when I try to record a live event; such as, a Canucks game, but my HD is empty.

terkan · 10-17-2010, 09:12 PM

Quote:

Originally Posted by StylinRed

^^^^ that's what i figured

i've got a Pace with my own hardrive hooked up

had quite a few problems and noticed some areas where its lacking

+ i cant use my dvd recorder with the Pace... i keep getting "cant record copyrighted material" messages regardless of the channel time program (even paid programming/pbs etc) but i can use my vcr

with my motorola i can still use my dvd recorder

most digital content you won't be able to record due to the copyright law nowadays. you can record using vcr coz it can't tell the difference

nns · 10-17-2010, 09:27 PM

LOL, you don't need to tell some guy over the internet your serial # to get him to force a firmware download on your box.

Unplug the power from the box. Hold down 'Power' and 'Select', while simultaneously plugging the power cord into the back of the box. The box should immediately DL the firmware.

StylinRed · 10-17-2010, 10:21 PM

Quote:

Originally Posted by terkan

most digital content you won't be able to record due to the copyright law nowadays. you can record using vcr coz it can't tell the difference

was told it was some Shaw bullshit because they kept the code in the stream or something...

if you look at the Pace manual from the Pace website you're supposed to be able to copy whats on the pvr to your dvd recorder too -_-

they totally made my dvd recorder useless good thing i kept my motorola as well i guess as that works or else i'd have to buy one of those machines that makes it so you can record (costs like $100)

willystyle · 10-28-2010, 10:58 PM

Quote:

Originally Posted by nns

LOL, you don't need to tell some guy over the internet your serial # to get him to force a firmware download on your box.

Unplug the power from the box. Hold down 'Power' and 'Select', while simultaneously plugging the power cord into the back of the box. The box should immediately DL the firmware.

I tried switching from powerbar to outlet, but that hasn't worked. Now I'm doing the firmware update method, hope it works.

terkan · 10-29-2010, 05:29 PM

Quote:

Originally Posted by nns

LOL, you don't need to tell some guy over the internet your serial # to get him to force a firmware download on your box.

Unplug the power from the box. Hold down 'Power' and 'Select', while simultaneously plugging the power cord into the back of the box. The box should immediately DL the firmware.

hmm you could cold dump the box forcing it to drop all the data on the box and re download whatever firmware. but probably it's easier for us to do it just coz we can see whether we even have a connection to the box.. so what if u cold dump the existing firmware but u ain't even connected? you still have to end up calling

nns · 10-29-2010, 06:21 PM

LOL, it was your suggestion for him to post his serial # so you could initiate a firmware download. I simply offered an alternative method that would have the same result.

You didn't say anything about seeing if you could initiate a connection to the DCT.