REVscene Automotive Forum

REVscene Automotive Forum (https://www.revscene.net/forums/)
-   Vancouver Auto Chat (https://www.revscene.net/forums/vancouver-auto-chat_173/)
-   -   have anyone paint a whole car youself? (https://www.revscene.net/forums/665289-have-anyone-paint-whole-car-youself.html)

alexjimjim 03-25-2012 12:10 AM

have anyone paint a whole car youself?
 
same as topic ?

SpuGen 03-25-2012 12:16 AM

http://www.revscene.net/forums/66496...car-paint.html

Seriously?

alexjimjim 03-25-2012 12:55 AM

Quote:

Originally Posted by SpuGen (Post 7863121)

just a thought why not ?

belaud 03-25-2012 01:13 AM

pipe dreaming, extreme edition

alexjimjim 03-25-2012 01:25 AM

1 Attachment(s)
plus anyone know what is the rims called?

1exotic 03-25-2012 01:32 AM

Yes ricer (op) I have prepped an entire car ready for paint, just had my painter spray down the primer and paint + clear. Prep is the most important part. Total result was perfect.

Since you're a ricer, you will not be able to accomplish this task.

Better pay some guy on craigslist a few hundred bucks to spray your car with spray cans.

edit: you can find rims like that for $150/set new on ebay I'm pretty sure.

Matsuda 03-25-2012 04:37 AM

they're called Fugly

Nicotine 03-25-2012 07:04 AM

Quote:

Originally Posted by Matsuda (Post 7863242)
they're called Fugly

i thought they were called the surrey special.

GabAlmighty 03-25-2012 07:49 AM

Ya, i've painted my old car with a few cans of flat black spray paint. It looked like shit cuz I put a coat of clear over it.

firebird79_00 03-25-2012 07:58 AM

its called maaco

godwin 03-25-2012 11:39 AM

With most of the tools so cheap these days it is not hard, nor expensive to DIY.

Paint is the easy part. Get a big compressor from KMS ~500 bucks, HVLP guns from Princess ~200. A respirator. Paint from Sherwin Williams... Go nuts.

Read the MSDS first, one paint job at close proximity will write you off from the gene pool.

jing 03-25-2012 11:54 AM

Quote:

Originally Posted by godwin (Post 7863416)
With most of the tools so cheap these days it is not hard, nor expensive to DIY.

Paint is the easy part. Get a big compressor from KMS ~500 bucks, HVLP guns from Princess ~200. A respirator. Paint from Sherwin Williams... Go nuts.

Read the MSDS first, one paint job at close proximity will write you off from the gene pool.

I doubt most people on here even know what a MSDS is

godwin 03-25-2012 11:59 AM

Well it is kind of like the fine print on TV ads.. if you don't know what it is, I am not sure you would want to paint the car yourself.

Quote:

Originally Posted by jing (Post 7863447)
I doubt most people on here even know what a MSDS is


MindBomber 03-25-2012 12:14 PM

Quote:

Originally Posted by godwin (Post 7863416)
With most of the tools so cheap these days it is not hard, nor expensive to DIY.

Paint is the easy part. Get a big compressor from KMS ~500 bucks, HVLP guns from Princess ~200. A respirator. Paint from Sherwin Williams... Go nuts.

Read the MSDS first, one paint job at close proximity will write you off from the gene pool.

Natural selection at work. :whistle:

I think there are couple places in the GVRD that allow you to rent a spray booth as well.

LenovoTurbo 03-25-2012 01:15 PM

Spray can jobs can actually look good.. that is if you know what you are doing.

It's all about the prep work, and light coats.

godwin 03-25-2012 01:23 PM

Yes however you need quite a few cans.. sometimes just getting a batch of paint mixed is cheaper (when you have the equipment like an air compressor or ready). Those chinese HVLP guns are bordering disposable.. the cleaning kit often cost as much as the gun itself.

Quote:

Originally Posted by MintyGreenTea (Post 7863532)
Spray can jobs can actually look good.. that is if you know what you are doing.

It's all about the prep work, and light coats.


TurboFC3S 03-25-2012 02:17 PM

Quote:

Originally Posted by godwin (Post 7863416)
With most of the tools so cheap these days it is not hard, nor expensive to DIY.

Paint is the easy part. Get a big compressor from KMS ~500 bucks, HVLP guns from Princess ~200. A respirator. Paint from Sherwin Williams... Go nuts.

Read the MSDS first, one paint job at close proximity will write you off from the gene pool.

If that were true id be dead 10 times over now, lol

Just so people know though, In a nutshell, paint has a chemical in it that helps it dry called isocyanates. When you breathe it in paint fumes the isocyanates never leave your body, and eventually they will build up so much that everytime you inhale paint you will basically have a asthma attack lol.

So always wear your charcoal filter respirator half masks people! :)

firebird79_00 03-25-2012 04:57 PM

that or an air fed respirator

TurboFC3S 03-25-2012 07:09 PM

Quote:

Originally Posted by firebird79_00 (Post 7863702)
that or an air fed respirator

Yep fresh air supplied mask is defiantly the best option! But not accessible to most people who are painting in their garage lol

alexjimjim 03-26-2012 11:13 AM

i dont want to just paint with spray can i want to paint with a spray gun or something
plus i can find the wheel on e bay coz i still cant find what the rims called !!

alexjimjim 03-26-2012 11:31 AM

like i m just keep asking people from everywhere i can
that first of all i need to take the old paint off with different type of sand paper and sand block and i dont know much more .....
i will be soo thankful for you all !!! if some of you can tell me details about it so i can give a try for my celica !!1

rJZx 03-26-2012 11:32 AM

Could of edited your post instead of posting twice. Oh well guess two's better than one :troll:

jagan323 03-26-2012 11:41 AM

Quote:

Originally Posted by alexjimjim (Post 7864441)
like i m just keep asking people from everywhere i can
that first of all i need to take the old paint off with different type of sand paper and sand block and i dont know much more .....
i will be soo thankful for you all !!! if some of you can tell me details about it so i can give a try for my celica !!1

I would suggest you youtube some of this stuff. You can find it. But I wouldn't advise you trying it yourself, especially it seems like you haven't had much experience with this kind of thing.

Is there a reason you don't want to pay for a proper paint job?

jpark 03-26-2012 12:13 PM

Quote:

Originally Posted by alexjimjim (Post 7864441)
like i m just keep asking people from everywhere i can
that first of all i need to take the old paint off with different type of sand paper and sand block and i dont know much more .....
i will be soo thankful for you all !!! if some of you can tell me details about it so i can give a try for my celica !!1

why paint when you can wrap?

m-m design can help you out with your needs

NLY 03-26-2012 12:21 PM

http://i.imgur.com/RyRiz.jpg


All times are GMT -8. The time now is 06:12 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net