You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
If you have any problems with the registration process or your account login, please contact contact us.
Hi guys I have a secret project going on and I need some advise before I get over my head... for the rear windshield I want to make a lexan/polycarbonate window and I need to know if this is legal in B.C.
I would specially like to shape the glass a little to fit a custom hardtop for my convertible car, so is any type of plastic glass legal here and the dam monopolistic insurance company ICBC that dictates what can be insured.
Thanks
chances are if its not DOT approved; its not legal. Unless its for track use only, even then theres rules and regualtions you have to abide by.
__________________
"Just because any car nut can tell you every possible performance specification of a Ferrari doesn't mean he can drive. Most of these people live in places where they've never even seen a Ferrari, much less ever owned one themselves."
No person shall replace, or cause to be replaced, any glass in a door or windshield or window of a motor vehicle or a camper except with safety glass, provided that glass replaced in a windshield of a motor vehicle shall not be heat treated or case hardened glass.
This might be way easier since it is local, so you don't get border guards / clearing houses making all types of excuses. The place is out in Poco, next to the new bridge.
I cant afford to take it anywhere, I also found out that cutting those side windows off a Civic will shatter at the slightest cut because they are tempered glass.
The solution, overlapping! I'd just have to adjust my cad model for a flatter hatch but still keep the oval opening shape.
Thanks again guys and ancient_510 for finding the motor vehicle act laws.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
