FS: USED Zapco 1100.00 Mint!
 

Selling this amp, have recipts, mint condition 9.5/10 asking 450.00


•Reference Series Monoblock Class A/B Car Amplifier
•RMS Power Rating (14.4V): ◦4 ohms: 825 watts x 1 chan.
◦2 ohms: 1100 watts x 1 chan.

•Dynamic power output: 1450 watts x 1 chan.
•Optically isolated MOSFET power supply
•High current bipolar outputs
•E.H.V High voltage output circuitry
•Remote bass level input (remote level control sold separately)
•SLDIN-T.F Balanced line transmitter included
•LED power (green) and clipping (red) indicators
•Variable Bass Boost (0 to +12 dB bass boost at 50 Hz)
•SymbiLink acts as a line driver and can boost signal input up to 12dB (4-times)
•Improved noise rejection, lower system noise floor, reduced distortion, and up to 16V signal output
•Input mode switch (left, right, L/R sum)
•Mono channel operation
•Slew rate: 40V/uS
•Crossover x10 (550-5,500)
•Transient distortion (4 ohm, 40W): <0.03%
•Heavy duty textured pewter finished aluminum alloy heatsink or High-density split-dome convection heat sink for extreme heat dissipation
•SymbiLink balanced line inputs
•Gold-plated RCA level inputs
•Gold-plated high current screw terminals
•Input sensitivity: ◦Balanced (DIN): 250mV-10V

•Variable low-pass filter (55-550 Hz, 24 dB/octave)
•Variable low-pass filter (55-550 Hz, 24 dB/octave)
•Variable subsonic filter (24 dB at 15-50 Hz)
•Damping factor: >700 @ 4 Ohm
•CEA-2006 compliant amplifier
•Frequency response: 20-20,000 Hz
•Dimensions: 35"L x 7-1/2"W x 1-15/16"H
•4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.


Power Specifications - Subwoofer Channel


RMS Power @ 4 ohms
825 watts x 1 channel

RMS Power @ 2 ohms
1100 watts x 1 channel

RMS Power @ 1 ohm
Not Stable

Peak Power Output
1450 watts x 1 channel

Amplifier Specifications

Amplifier Class
AB

Number of Channels
1 - Mono

Total Peak Power Output
1450 watts

Total RMS Power Output
1100 watts

Maximum Input Gauge Size
8 AWG

Minimum Impedance Unbridged
2 ohms

Minimum Impedance Bridged
Not Bridgeable

THD at Rated RMS Power
<0.05%

Speaker Level Inputs
No

Preamp Outputs
No

Built-in Crossover
Low-pass (LP)
High-pass (HP)
Full (AP)

High-Pass Crossover Frequency
55 - 550 Hz

Low-Pass Crossover Frequency
55 - 550 Hz

Subsonic Filter
15 - 50 Hz

Signal-to-Noise Ratio
>90 dB

Channel Separation
N/A

Bass Boost
0 - 12 dB

Bass/Gain Remote
Optional (Accessory required and sold se

Fuse Rating
30A x 3

http://i.seimg.net/images/525119/big...p-11001-OB.jpg

350.00

ttt

ttt

300.00:concentrate:

ttt