You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
If you have any problems with the registration process or your account login, please contact contact us.
^did you leave automatic switch to parking mode on? and did you press the led switch to parking mode before you leave your vehicle?
Try format your sd card and reinitializing sd card.
It may seem like peanuts to you, but you know what else is the size of a peanut? your anus. and when somebody wants to fuck u up your anus, I shall fight.
Unlike some who shall present and loudly proclaim "Have at it master!"
since Will configured my dr380 to automatic parking mode
can i just leave without hitting the parking mode switch, but make sure to have the powerbox at the on switch
becuz i've been hitting the parking mode when i park and turning on the box and its CONSTANTLY recording...I assume this is becuz of motion...
from what I remember, it only starts recording if there is impact or if there is motion
I didnt check what color the recording light was at when I jumped back in the car
sry haha
Last edited by Tim Budong; 09-24-2012 at 02:35 AM.
since Will configured my dr380 to automatic parking mode
can i just leave without hitting the parking mode switch, but make sure to have the powerbox at the on switch
becuz i've been hitting the parking mode when i park and turning on the box and its CONSTANTLY recording...I assume this is becuz of motion...
from what I remember, it only starts recording if there is impact or if there is motion
I didnt check what color the recording light was at when I jumped back in the car
sry haha
If everything is working perfectly, then there's no need for you to hit the switch. The camera will record for 10 minutes on normal, and then switch to parking mode. If you hit the button it'll change immediately.
If for example you park outside and there are trees rustling, then it will record all day all night...so turn down the sensitivity.
Usually the LED is off when the camera is in parking mode, so it doesn't attract attention.
Dartchchilli
If your camera run in parking mode, make sure power magic pro switch turn on to 1 before ignition off.
If you don't hit the camera LED switch, it stays for 10 minutes after you turn off your vehicle, and the camera will automatically switch to parking mode. Parking mode LED is off when I set it.
Power magic pro green light is on, and camera led is off if you get back to your car in the morning.
If you leave power magic pro on 1 and the power magic green light is off in the morning, that means your battery is under configured voltage setting 12v or 11.8v
Is the ring around the Lense chrome for any specific reason? If we painted it matte black or the whole unit matte black for that matter, would it affect anything?
I just want to hide it a bit better cause I park outside on a pretty busy street near bars and stuff...
Dartchchilli
If your camera run in parking mode, make sure power magic pro switch turn on to 1 before ignition off.
If you don't hit the camera LED switch, it stays for 10 minutes after you turn off your vehicle, and the camera will automatically switch to parking mode. Parking mode LED is off when I set it.
Power magic pro green light is on, and camera led is off if you get back to your car in the morning.
If you leave power magic pro on 1 and the power magic green light is off in the morning, that means your battery is under configured voltage setting 12v or 11.8v
I will give it another look. I know you configured everything properly. It should be fine, I dont really need to run the cam in my building garage anyways. its only when i'm at work or what not.
im not the brightest lolol.
The battery wont die with the power magic on 1 before ignition and on camera mode while its recording for roughly 8hours
as long as this is true, then Im in the clear
I will give it another look. I know you configured everything properly. It should be fine, I dont really need to run the cam in my building garage anyways. its only when i'm at work or what not.
yeah, just put the power magic pro switch on 0 if you don't need parking mode running. So no power go through to your camera.
1080P HD
Record with overlapping
G Sensor
wide 148 degrees lens
Motion detect with power magic pro
1920x1080/1280x720
Date and time display on/off
Voice on/off
Motion: on/off
Loop recording: 0-5 minutes
8 languages
ASR Matego MG188 1080p+Blackvue Power Magic Pro PREORDER Bundle Price: $210 includes HST with Free Clean Hardwiring Installation
Bundle price is valid in Oct1-Oct 31stonly
Warranty: 6 months Factory Warranty covered on Camera and Power magic Pro
Matego MG188: $150 includes HST.
Pre-order through PM.
+
If you need Add-a-Circuit, it will be $10 each based on the bundle price.
There is such a massive difference between police lights and a small blue LED that I would like to think the world still has at least that much common sense left.
You can always turn it off lol (except the dr400 v2 )
My AFC gave me an ABS CEL code of LOL while at WOT!
Join Date: Sep 2011
Location: RevScene.net
Posts: 1,889
Thanked 1,284 Times in 420 Posts
Quote:
Originally Posted by ToddPacker
So this just came up in my mind while I was driving.
We all know about " illegal illumination" while driving at night ( underglow neons, turning on your dome lights , "blue" headlights ).
How about the blue LED that glows on the dash cam, won't this cause a problem especially since it's blue, which is a "police " color?
Seriously?
This is even an question???
You're comparing a 1watt + police strobe light with one that glows from the dash cam?
Heck, there's LED / backlight from your radio / entertainment system too. Or a "police colour" RED led that glows from radar detectors too. I suppose those are now illegal too 'eh?
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
No worries, buddy.
)
Seriously?
