so, i just purchased the foglight kit from honda for my 7th gen accord v6, the box includes all the parts, and they also provided me a 19 page installation manual.
The problem I have now. I am at the page for the 14 pin connector and 20 pin connector cables under the relay box. The harness that was included in the box has a cable that has 2 wiring connectors I have to plug into the terminals on each of the two connectors. One wire is blue/red, the second is blue/white. The diagram says plug white/green wire into the 14 pin connector, as well as a red/green wire. The 20pin connector tells me to plug in the red/blue connector. The only wire I have is the red/blue that matches the discription. The diagram has 3 wires, white/green, red/green, and red/blue. Since, I only have the red/blue and blue/white wires, which connector should I plug into?
sounds very confusing.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
