Client called wanting his new Subie protected properly from the get go. Not much polishing was needed in this case as it was in decent shape from the dealer. Who knew, eh?
Presoaked with Exclusive Citrus Cleaner at 3:1
Soaked with Carpro IronX to remove any contamination and rinsed
Washed with ONR 3oz / 4 gallons of water
Wheels cleaned with Exclusive APC 3:1
Polished with Rupes Duetto / Microcut MF cutting disc and Optimum Hyper Polish
Wiped down with Carpro Eraser to remove any polishing residue
Optimum Opti Coat Pro applied to all exterior surfaces
Wheels removed, cleaned and coated with Opti Coat Pro as well.
Total time - 9 hours
Iron X runoff in the foam. For a new car, quite a bit of contamination.
Foaming citrus cleaner doing it's thing
Deep scratches in the rear bumper courtesy of the guy who installed the clean film to protect the luggage area. Irony at it's best.
Various scratches
Light swirling consistent over the car
Wheels off for coating
Afters
Thanks for looking.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
