You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
If you have any problems with the registration process or your account login, please contact contact us.
For the past couple years my brother has been borrowing my E34 to get around, he finally found himself a replacement so I can take it back — a 1991 EF with 102,000 KM ! Dealer serviced, Typical Milano PINK paint (going to see what I can save with the DA polisher and go from there), Roof will need to be wrapped or resprayed... but no rust, a minty interior and the D15 will be great for these current gas prices.
So far I need Clear corner lights, RR taillight (cracked), a rear seat-back that isn't faded at the headrests, and some Mugen MR5's or TE37's Anyone with EF parts please HMU.
__________________ Current 1994 BMW 540i Oxford Grün[E34] - For Sale Soon
1993 Honda Accord LX Coupe Seattle Silver[CB7] 2000 Honda Civic SiR Vogue Silver Metallic[EM1] 2001 Infiniti QX4 Tuscan Beige Metallic[R50] Scoots
01' Honda Dio 50cc [AF27] 01' Honda Dio 72cc Big Bore [AF27] 89' Honda Elite R 49cc [SE50]
Took the bananagram on my first road rally with the PCA-CWR last week. Hit some great roads on the fort langley side of the highway that I've never really explored before. (photos courtesy of the CWR)
LOL, I did it =) i registered this. Interesting, but ICBC registered it as ubilt/altered. Probably, even easier for me. Was a bit of a dance to make a BC VIN number....
Did you buy or build? I want info. Building a car is in the plans!
I had imported from Japan. Called Mitsuoka zero 1, i believe it was a factory only build. Read a bunch of stuff regarding kit cars, while dealing with it. A bit tricky. If the kit car is more then 15 years old, the rules are applied in the same way as you importing an ordinary car (so it does not matter by whom it was build at this point).
If you building the car yourself here, you must have all receipts on frame and drive train(to prove that it was not stolen). And then you apply on BC VIN program, as I, finally Vehicle Inspection
In Iran now, trying to fix up my late father's cars.
While everyone here is concerned about Trump's attack and the aircraft carriers down south, I'm worried about finding parts for these two
In Iran now, trying to fix up my late father's cars.
While everyone here is concerned about Trump's attack and the aircraft carriers down south, I'm worried about finding parts for these two
1964 Dart 270, manual tranny
1974 280S, yes it needs paint
I was in Iran 10 years ago and noticed a lot of nice classic American muscle and vintage Merc's. Pretty cool that you are looking to restore them. I think your best bet is to find someone in Turkey to source the parts for the Merc. I found a lot of parts in Turkey for my C123 but shipping is expensive to Canada. Good luck man. Nice to see a fellow Persian on the forum.
Will be easy to find parts for the Benz, Mercedes still manufactures them. The 280 engine was used throughout the Benz range and can still be serviced with new parts. The Dart, maybe not so much. What is it like getting parts shipped from Europe to Iran?
__________________ Current 1994 BMW 540i Oxford Grün[E34] - For Sale Soon
1993 Honda Accord LX Coupe Seattle Silver[CB7] 2000 Honda Civic SiR Vogue Silver Metallic[EM1] 2001 Infiniti QX4 Tuscan Beige Metallic[R50] Scoots
01' Honda Dio 50cc [AF27] 01' Honda Dio 72cc Big Bore [AF27] 89' Honda Elite R 49cc [SE50]
I was in Iran 10 years ago and noticed a lot of nice classic American muscle and vintage Merc's. Pretty cool that you are looking to restore them. I think your best bet is to find someone in Turkey to source the parts for the Merc. I found a lot of parts in Turkey for my C123 but shipping is expensive to Canada. Good luck man. Nice to see a fellow Persian on the forum.
Thanks dude. Yeah, there are quite a few classics kicking around here and the owners take care of them properly. Turkey is a good call, but that might be difficult now as the country is under sanctions.
Quote:
Originally Posted by TopsyCrett
Will be easy to find parts for the Benz, Mercedes still manufactures them. The 280 engine was used throughout the Benz range and can still be serviced with new parts. The Dart, maybe not so much. What is it like getting parts shipped from Europe to Iran?
Yes, Merc parts are relatively easy to find here, popular cars back in 70s and 80s. Outsourcing is not very good at the moment, sanctions affect a lot of importation and things get stuck in the customs.
For now I found a set of OEM 14s for the Merc and replaced them with the 17s that were on the car, they were too big.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
Anyone with EF parts please HMU. 
