| Vancouver Off-Topic / Current Events The off-topic forum for Vancouver, funnies, non-auto centered discussions, WORK SAFE. While the rules are more relaxed here, there are still rules. Please refer to sticky thread in this forum. |
 | 
07-31-2013, 01:07 PM
|
#1 | | The RS Anchorman
Join Date: May 2003 Location: Comics
Posts: 2,059
Thanked 49 Times in 22 Posts
Failed 21 Times in 8 Posts
| World’s largest tunnelling machine, Bertha, starts digging new Highway 99 route benea
SEATTLE — After years of planning and months of work, the world’s largest tunnelling machine started drilling Tuesday to create a new route for Highway 99 under downtown Seattle buildings, the Washington Transportation Department said.
“Today is the day,” spokeswoman KaDeena Yerkan said. “Everyone here is very excited.”
The tunnel will go under about 200 buildings, but officials don’t expect any serious problems from the machine they call Bertha.
“We know exactly the path of Bertha and what she’ll encounter along the way,” Yerkan said.
The tunnelling crew will be monitoring for settling and vibrations and is prepared to keep building foundations secure.
“So we’re not worried buildings are going to tip,” Yerkan said.
Transportation officials have set up Bertha with her own Twitter account to provide updates.
Bertha is 326 feet (100 metres) long and weighs 7,000 tons. It will leave a tunnel nearly 58 feet (17.5 metres) in diameter.
The $80-million machine is part of the $3.1-billion project to replace the Alaskan Way Viaduct, the double deck highway along the downtown Seattle waterfront. Built in 1953, it has carried 110,000 vehicles a day. Officials said the structure had to be replaced because it could collapse in an earthquake. Its removal is part of a project to renovate the waterfront, rebuilding the seawall, improving surface streets and adding new vistas of Elliott Bay.
Bertha was built in Japan and arrived by ship in April in 41 pieces. It was reassembled in a pit near the CenturyLink Field and Safeco Field stadiums.
It will take about 14 months to complete a nearly two-mile (3.2 km) tunnel. Bertha is projected to punch through to the surface near south Lake Union by October 2014. Traffic is expected to start using the four-lane toll tunnel by late 2015.
The Transportation Department and the contractor, Seattle Tunnel Partners, held a June 20 dedication ceremony with Washington Gov. Jay Inslee calling it a historic occasion.
Bertha is named for Bertha Knight Landes, the first and so far only woman to serve as mayor of Seattle. She was elected in 1926.
© Copyright (c) World?s largest tunnelling machine, Bertha, starts digging new Highway 99 route beneath Seattle waterfront World?s largest tunnelling machine, Bertha, starts digging new Highway 99 route beneath Seattle waterfront | 
|  | |
07-31-2013, 01:18 PM
|
#2 | | Zionism gets my shell hard and slimy
Join Date: Jun 2012 Location: in a shell
Posts: 2,598
Thanked 6,021 Times in 1,129 Posts
Failed 253 Times in 80 Posts
| | |
| | |
07-31-2013, 02:24 PM
|
#3 | | 14 dolla balla aint got nothing on me!
Join Date: Jan 2006 Location: Mission
Posts: 694
Thanked 683 Times in 129 Posts
Failed 33 Times in 9 Posts
| | |
| | |
07-31-2013, 02:39 PM
|
#4 | | I contribute to threads in the offtopic forum
Join Date: Jun 2006 Location: not vancouver
Posts: 2,642
Thanked 1,941 Times in 765 Posts
Failed 532 Times in 202 Posts
| Quote:
Originally Posted by snails  | click the fucking link and you get a video
| |
| | |
07-31-2013, 02:39 PM
|
#5 | | In RS I Trust
Join Date: Mar 2003 Location: Mission
Posts: 20,791
Thanked 17,663 Times in 4,346 Posts
Failed 1,037 Times in 352 Posts
|
I think that the company my buddy works for is doing that project since they are located in Seattle. They just finished the large project in Mexico and my buddy was the lead on the whole drilling process on the project.
| |
| | |
07-31-2013, 02:42 PM
|
#6 | | RS has made me the bitter person i am today!
Join Date: May 2005 Location: 604
Posts: 4,564
Thanked 1,789 Times in 569 Posts
Failed 335 Times in 77 Posts
| Quote:
Originally Posted by murd0c I think that the company my buddy works for is doing that project since they are located in Seattle. They just finished the large project in Mexico and my buddy was the lead on the whole drilling process on the project. |  | |
| | | This post thanked by: | 2damaxmr2, 46_valentinor, asahai69, AW607, Broseidon, evlee, Expresso, fetched, flagella, FN-2199, fT-z33wor, GoneGuru, Gumby, HonestTea, iEatClams, iwantaskyline, jepho, jtrinh, kb, KingDeeCee, lowside67, murd0c, nsmb, OGCStrike, Phozy, pinn3r, Presto, radioman, RecklessNS, red_2, SkinnyPupp, sonick, Vansterdam, vitaminG, westopher, XplicitLuder, Yodamaster | |
07-31-2013, 03:40 PM
|
#7 | | Banned By Establishment
Join Date: Dec 2003 Location: New West
Posts: 3,998
Thanked 2,982 Times in 1,135 Posts
Failed 284 Times in 109 Posts
|
My mother was friends with a lady down the road in Nova Scotia that moved away 25 years ago that was second cousins to Burton Cummings, that was kind of a big deal if you like that song Taking Care of Business.
Point is, we all have powerful friends Murdoc  | |
| | |
07-31-2013, 07:27 PM
|
#8 | | Ready to be Man handled by RS!
Join Date: Sep 2001 Location: Burnaby
Posts: 1,798
Thanked 1,502 Times in 506 Posts
Failed 418 Times in 151 Posts
|
I'm actually surprised that machine is ONLY worth $80 million.
| |
| | |
07-31-2013, 07:46 PM
|
#9 | | Waxin’ Punks
Join Date: Jun 2006 Location: South Surrey
Posts: 7,280
Thanked 6,161 Times in 2,138 Posts
Failed 216 Times in 114 Posts
|
^ Considering a recent thread involved a yacht with a 60M annual maintenance investment, I completely agree.
__________________
If you drive like an asshole, you probably are one. Quote:
Originally Posted by MG1 punkwax, I don't care what your friends say about you, you are gold! | Quote:
Originally Posted by mikemhg What do your farts sound like then? | | |
| | |
07-31-2013, 08:13 PM
|
#10 | | Head Moderator
Join Date: Dec 1982 Location: Great White Nor
Posts: 22,661
Thanked 6,462 Times in 2,081 Posts
Failed 98 Times in 51 Posts
| Quote:
Originally Posted by dangonay I'm actually surprised that machine is ONLY worth $80 million. | I wonder what the cost is for replacement blades, however.
| |
| | |
07-31-2013, 08:30 PM
|
#11 | | My homepage has been set to RS
Join Date: Aug 2002 Location: AB/BC
Posts: 2,245
Thanked 1,221 Times in 392 Posts
Failed 26 Times in 10 Posts
|
what an honour to be a woman and have the worlds largest tunneling machine named big bertha after you
| |
| | |
07-31-2013, 09:35 PM
|
#12 | | Willing to sell body for a few minutes on RS
Join Date: Aug 2002 Location: Vancouver
Posts: 10,651
Thanked 3,813 Times in 1,483 Posts
Failed 142 Times in 70 Posts
|
First the Big Bertha driver from Callaway Golf, and now this!
Bertha is not a very flattering name... 
__________________
Do Not Put Aftershave on Your Balls. -604CEFIRO
Looks like I'm gonna have some hot sex again tonight...OOPS i got the 6 pack. that wont last me the night, I better go back and get the 24 pack! -Turbo E
kinda off topic but obama is a dilf - miss_crayon
Honest to fucking Christ the easiest way to get a married woman in the mood is clean the house and do the laundry.....I've been with the same girl almost 17 years, ask me how I know. - quasi
| |
| | |
07-31-2013, 11:14 PM
|
#13 | | Diagonally parked in a parallel universe
Join Date: Feb 2002 Location: Vancouver
Posts: 1,497
Thanked 293 Times in 76 Posts
Failed 4 Times in 4 Posts
|
For a moment there, I was hopeful this had something to do with replacing/expanding the Massey Tunnel 
__________________
Some say I never blink, and that I roam around the woods at night foraging for wolves.
All we know is, I'm called The Stig | |
| | |
08-01-2013, 05:17 AM
|
#14 | | Official Texas Ambassador
Join Date: Oct 2004 Location: Houston, TX
Posts: 10,333
Thanked 5,671 Times in 1,324 Posts
Failed 416 Times in 132 Posts
| Quote:
Originally Posted by TheStig For a moment there, I was hopeful this had something to do with replacing/expanding the Massey Tunnel | Anybody who drives that tunnel at rush hour every day knows that tunnel is just fine. In fact, we can probably replace one of the lanes with a bike lane.
__________________ Quote:
Originally Posted by MG1 She taught me right from wrong and always told me to stay positive and help others no matter how small the deed - that helping others gives us meaning to carry on. The sun is out today and it's a new day. Life is good. I just needed a slap in the face. | | |
| | |
08-01-2013, 06:54 AM
|
#15 | | I WANT MY 10 YEARS BACK FROM RS.net!
Join Date: May 2005
Posts: 20,417
Thanked 7,482 Times in 1,450 Posts
Failed 2,380 Times in 472 Posts
|
it reminds me this  | |
| | |
08-01-2013, 07:47 AM
|
#16 | | RS.net, helping ugly ppl have sex since 2001
Join Date: Oct 2005 Location: Revscene
Posts: 9,971
Thanked 8,212 Times in 2,766 Posts
Failed 438 Times in 130 Posts
| Quote:
Originally Posted by Lomac I wonder what the cost is for replacement blades, however. | That's how they get ya.
__________________ Quote:
Originally Posted by skyxx Sonick is a genius. I won't go into detail what's so great about his post. But it's damn good! | 2010 Toyota Rav4 Limited V6 - Wifey's Daily Driver
2009 BMW 128i - Daily Driver
2007 Toyota Rav4 Sport V6 - Sold
1999 Mazda Miata - Sold
2003 Mazda Protege5 - Sold
1987 BMW 325is - Sold
1990 Mazda Miata - Sold 100% Buy and Sell Feedback | |
| | |
08-01-2013, 08:01 AM
|
#17 | | Banned By Establishment
Join Date: Dec 2003 Location: New West
Posts: 3,998
Thanked 2,982 Times in 1,135 Posts
Failed 284 Times in 109 Posts
| Quote:
Originally Posted by sdubfid what an honour to be a woman and have the worlds largest tunneling machine named big bertha after you | Perhaps she was big in ideas and personality(but probably big boned as well)
| |
| | |
08-01-2013, 08:02 AM
|
#18 | | Even when im right, revscene.net is still right!
Join Date: Dec 2011 Location: Burnaby, BC
Posts: 1,356
Thanked 1,532 Times in 479 Posts
Failed 202 Times in 77 Posts
|
Inb4 Gears of War-esque collapse of entire city. IT'S A GIANT WORRMMM!
| |
| | |
08-02-2013, 10:21 AM
|
#19 | | Willing to sell body for a few minutes on RS
Join Date: Feb 2010 Location: Vancouver
Posts: 10,276
Thanked 4,238 Times in 2,095 Posts
Failed 698 Times in 222 Posts
|
If we only had these kinds of engineering projects to improve our transportation network in Vancouver and the Lower Mainland.
TransLink is always asking for money, for handouts. -too broke to get big Bertha working for us.
We get a new Port Mann bridge, but not enough money to fix our roads and transit system. Mayor Moonbeam spends tax dollars on bike lanes. 
__________________
Go Canucks go!
| |
| | |
08-02-2013, 12:29 PM
|
#20 | | 2010 RS Top Food Critic Winner
Join Date: Jul 2006 Location: Vancouver
Posts: 5,410
Thanked 694 Times in 233 Posts
Failed 102 Times in 16 Posts
|
Did anyone else think this when they saw the picture?  | |
| | |
08-02-2013, 12:35 PM
|
#21 | | 2x Variable Nockenwellen Steuerung
Join Date: Oct 2002 Location: N49.2 W122.1
Posts: 6,176
Thanked 1,174 Times in 704 Posts
Failed 67 Times in 51 Posts
|
Wow you have really short memory! We did have tunnelling machines, when we were building Canada line. The stretch from Cambie to Downtown, in fact I think one of them is buried down there for good.
It took Seattle a few earthquakes and close calls to decide to tear that thing down. They weren't any better.
Well "Mayor Moonbeam" as you said, also wants transit from Commercial to UBC, so we will get a tunnelling machine when that happens. If you want things done quicker, get the Gov to reduce appeal process to 1 round.. instead of NIMBY keep pilling on lawsuits after lawsuits to drag the process out. Quote:
Originally Posted by pastarocket If we only had these kinds of engineering projects to improve our transportation network in Vancouver and the Lower Mainland.
TransLink is always asking for money, for handouts. -too broke to get big Bertha working for us.
We get a new Port Mann bridge, but not enough money to fix our roads and transit system. Mayor Moonbeam spends tax dollars on bike lanes. | | |
| | |
08-02-2013, 07:32 PM
|
#22 | | Willing to sell a family member for a few minutes on RS
Join Date: Apr 2011 Location: North vancouver
Posts: 14,075
Thanked 35,139 Times in 8,472 Posts
Failed 235 Times in 183 Posts
| Quote:
Originally Posted by murd0c I think that the company my buddy works for is doing that project since they are located in Seattle. They just finished the large project in Mexico and my buddy was the lead on the whole drilling process on the project. | 
__________________
98 technoviolet M3/2/5 Quote:
Originally Posted by boostfever Westopher is correct. | Quote:
Originally Posted by fsy82 seems like you got a dick up your ass well..get that checked | Quote:
Originally Posted by punkwax Well.. I’d hate to be the first to say it, but Westopher is correct. | | 
| | |
08-03-2013, 12:17 AM
|
#23 | | Zombie Mod
Join Date: Aug 2003 Location: Langley
Posts: 9,937
Thanked 5,256 Times in 1,582 Posts
Failed 120 Times in 54 Posts
| Quote:
Originally Posted by dangonay I'm actually surprised that machine is ONLY worth $80 million. | Quote:
Originally Posted by Lomac I wonder what the cost is for replacement blades, however. | The tunnelling machine is a joint venture with Gillette. They, practically, give away the machine, but make bank on the replacement blades 
__________________
Romans 10:9 | |
| | |
08-03-2013, 07:57 AM
|
#24 | | what manner of phaggotry is this
Join Date: Nov 2001 Location: Kelownafornia
Posts: 18,285
Thanked 5,473 Times in 1,814 Posts
Failed 205 Times in 120 Posts
|
"Is it in yet?" 
__________________
STRENGTHaesthetics | |
| | |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off
| | |
All times are GMT -8. The time now is 05:01 PM.
|
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
