FS: Rupert! 2001 Intetra Type-R Mugen K20A Swapped

[Moo Man]

***For Sale***

2001 DC2 ACURA INTEGRA TYPE-R (hardly an ITR anymore, lol)
Custom Gun Metal Paint, No Interior
6 Speed, approx 100k on the Chassis, appeox 30k on the Engine, Garage Kept, no big claims, 1st owner

OK, the price has been lowered to a retarded new low, I NEED THE CAR GONE BEFORE SUMMER ENDS. $13,000
Now parting out the rollcage, big brake kit, suspension bars and possibly suspension (if I can find stockers for cheap), and I'll be lowering the cost of the rolling chassis with Mugen K20/Kpro along with the mugen suspension bushing'ed arms and sway bar.

Modifications:

~~Engine/Drivetrain~~
- Mugen Japan Spec K20A Crate Engine (built by Mugen, duh. Swap done by A&J Racing)
- Hasport Racing Engine Mounts for K20A Swap
- Port and Polished Head
- Toda Valvetrain with Toda N2 Camshafts
- Toda Highcompression Head Gasket
- Custom Chameleon Painted Valve Cover
- DTR Racing Custom Race Header
- Custom 70mm Headerback Exhaust
- AEM Cold Air Intake for K-Swapped DC2's
- Custom made Intake Manifold Plenum
- Spoon 70mm Throttlebody
- Hondata K-Pro fully tunable ECU
- JDM DC5 Type-R 6speed Transmission with 5.1 Finaldrive
- Spoon 1.5way LSD
- Hasport Stage2 Reinforced drive axles


~~Suspension/Footwork~~
- Skunk2 Pro-C Fully Adjustable Race Coilovers
- Skunk2 Pro Camber Kit (Front)
- T1R Rear Camber Kit
- Mugen Suspension Arm Bushings (Full Set)
- BuddyClub 25mm Rear Sway Bar
- Spoon Rear Lower Arm Bar
- Mugen Front/Rear Tower Bar
- Cusco 6 Point Roll Cage
- J's Racing Roll Center Adjuster

~~Exterior~~
- Ings+1 Bodykit
- Shiftsport Wide Front Fenders (+10mm)
- Shiftsport Vented Carbon Fiber Hood (Painted)
- VIS Carbon Fiber Rear Hatch (Painted)
- FAL Lexan Rear Hatch Glass (Super Lightweight)
- J's Racing Front Tow Hook

~~Interior~~
- Spoon Sports Gauge Cluster (Discontinued, and VERY nice)
- Defi BF Gauges (Oil Pres, Oil Temp, Water Temp)
- Defi Link Control Unit II
- S2000 CR 6Speed Shiftknob with Yellow Letters
- Momo Corse Steering Wheel 350mm

~Wheels/Tires/Brakes~
- 16x8 et+35mm BuddyClub QF Super Lightweight wheels in Gun Metal
- 225/45/16 Yokohama Advan A048 R-Compount Tires (99% Treads, almost brand new)
- Brembo Monoblock RACE Brake Kit (custom fitted, I bought the calipers used off some race team auction). Comes with humongous monoblock Brembo calipers, huge race pads, 330mm Spoon Rotors, and Steel Braided Lines


The car has no seats in it right now because I have sold the Mugen bucket seats that were in it to a friend in Calgary, the car also has no Stereo in it because I only drove it in the summer when I feel like taking it out for a rip. Other than that, the car drives perfectly, handles perfectly, and is FXXKIN FAST. It is easy to put interior back in this car to make it 100% streetable (I just don't want to deal with it becuase I am sick of dealing with cars now) I can arrange to have some sort of stock seat put in if you're interested to take a look at the car. The rear wing that you see in the pictures has also been sold.

Keep in mind the car has no wing and has the buddyclub wheels on now, and no interior as well






If interested please contact me at:

Phone: 604-724-4189
Email: moopuppet@hotmail.com

Cheers,
Justin

[tortoise1810]

sick car
bump

[600rr]

nice engine

[Aztech]

Any chance you will part the cage

[optiblue]

Always been a fan of that car! This sale signifies the end of an era!

[reaver64]

Goddamn.. that's such a sexy car.. nicest r i've ever seen, the body kit is just perfect, and the k20

[Moo Man]

Thanks guys. It's just time for me to grow up a little bit.
I have been in the car game for almost 10yrs now and I've kinda lost the passion and I've done almost everything possible that I can do to this car. I don't have the time and passion to take it to track every year anymore either. So why not sell it to someone who'd make good use of such beast?

And as for part outs... I've already parted out and sold everything that I could. I might consider letting go of the gigantic brakes, but they won't be cheap. =) I'll think about the cage too, but removing it is too much work and honestly I try not to get my hands dirty with cars that much anymore

[Joreus]

I'd be interested if it was a little more together, savage car nonetheless.

[twitchyzero]

hot car...good price

[E-40six]

come to the dark side and get a truck!

[TRD Rs200]

best R period, GLWS Justin

[KIMBOSLICE]

Sick ride. gl with sale.

[Moo Man]

thx guys~

[suckmy8==D]

what dyno numbers would this put down?? thanks, nice car

[DHP 1]

bump for you justin


its sad to see you leaving the scene


his number should be around 250-260whp

[Moo Man]

Thanks mang! Price has been slightly adjusted, and its OBO guys.
I'll consider parting out the cage, with reasonable offers.

Cheers,
Justin

[Mugen EvOlutioN]

sickest DC2



too bad u lost the passion


let me know if u wonna part out Spoon throttle body

[Aztech]

Pm'd

[Moo Man]

Cage is being sold too. So I'll be dropping the price on the car some more probably. BUMP!

[tegman]

dont dooooooooooooooo it

bump!

[Moo Man]

I'm dooooin it! buy the car! I'll give you a killah deal!

[Moo Man]

Update! Plans have been changed. I am now parting out the cage, brakes, wheels and tires, possibly suspensions and bars as well. Then I will lower the price of the rolling chassis with mugen k20/kpro. Hopefully it will sell faster that way.

[tofu1413]

asking too little for a too awesome of a car.


if i was able to sell mine, i'd get this in a heartbeat.


glws dude. hope it finds a good home.

[Moo Man]

all pm's replied!

[Moo Man]

bump!