LF: Civic Foglight WIRING Install

[Limitless]

Here's the thing, I have a 2009 honda civic sedan and recently got a set of aftermarket foglights off someone locally.

I have HID's installed on them and I have the wiring from the fogs already hooked up to the factory wiring that leads from the fogs on the bumper -> through the firewall -> to the wiring by the pedals. I have that wire connected to the switch, and I need someone to help me connect the relay and some fuses, and I'm all set.

I believe it's only a 15 minute job, but I'm willing to pay whatever your min. charge is to get this done since it's been bugging me for a while. Let me know, thanks (:


On a side note: I also have some lowering springs I plan to put on my car. However I currently have 15" winter tires on my car and I plan to switch back to all seasons when there's no more chance of snow, so I'm wondering if I would have to re-align my springs if I put them on now and switch to 16" all seasons.

Thanks

[Overseas Auto1]

Originally Posted by Limitless

On a side note: I also have some lowering springs I plan to put on my car. However I currently have 15" winter tires on my car and I plan to switch back to all seasons when there's no more chance of snow, so I'm wondering if I would have to re-align my springs if I put them on now and switch to 16" all seasons.

Thanks

If you install the springs now and do an alignment, changing the tires out later should have no bearing on alignment.