Island RS Members Rides

[zixian]

i got three merkur(ford) xr4tis one is heavly moded but isnt running yet(anyone heard of a ford not running right :P)

here are the parts on the daily driver
lunati cam
2.5 inch exausht
port and polished head
.60ar garret t3 and .48 turbine side
turbojoe billet anodized fuel rail
braided steal fuel lines an6
SX performance adjustable regulator
SVT 16inch rims
cone filter
NPR intercooler
centerforce clutch
new battery
clarion deck with jbl 6x9s and boston acoustics 5x7s.
autometer boost gauge
large 3 core rad
recent rebuild..forged je internals
rebuild head and turbo
poly front sway bar bushings.
stock massive wing(some like some dont) actually reduces drag but ALOT from .34 to .32 coefficient of drag
NICE paint
also i'll be throwing on in the next week or so some mustang cobra/gt PBR calipers on some SVT rotors

competition 3 layer head gasket

THIS is a 5 speed manual


that is the running daily driver

this is parts car/project car




and the next car is my "race" car i'm building.. shitty ugly as sin body but no dents.. gutted and here are the mods

Rebuild long block Bored .030 over (forged internals)
-polished crank
-head magna fluxed, ported and polished, over sized SS valves 1.89 Intake and 1.59 Exhaust.
-stock cam
-lower intake by Bob lee (ported and knife edged)
-racer walsh adjustable cam pulley
-BOB Lee moal (mother of all logs) header
-T5 tranny swap (complete) from a '83 TC w/ steep first gear
-Centerforce spec 2 clutch
-british sierra interior certer consol made to line up with the t5 shifter
-custom 2 piece drive shaft
- current dash cracked, I have a very good condition one ready to go in.
-phantom series white face boost guage and an A pillar dual guage pod
-Scorpio power sunroof motor for the sunroof
-400cfm fromt mount intercooler(new never used)
-holset hy35 turbo, internal wastegate modifed to run external 35mm wastegate w/ quicky downpipe. (3"mandrel bend)
-walpro 255 high flow intank fuel pump
-polished adj. fuel pressure regulator
-Rear strut tower brace

[zixian]

EH not MY cars but these are the TEAM cars.. i build and desgin and soon(next week ) drive these cars at uvic with the FSAE team Forumla society of automotive enginners
now FSAE is a competetion between all the universitys around the worl who wish to participate.. currently there are clos to 300 universitys in the program... there are many rules but simply put you got to build a race car that is restricted, 4 wheel irs, and 610cc.. 4 stroke and thats it.. turbo,supercharged, NA it doesnt matter.. soo you are judged on your cars performance in dynamic events such as skid pad, slalom and endurance
(22km LOL) university of victoria has been involved since 2002, and last year at formula student the competetion in england came in 11th overall and 7th in endurance(not many finish it).


alot of northamerican schools get unlimitedfunding we however are luck to get much funding at all from the school... but they are quite supportive nonethe less.. anyhow enough yak.. here are the pictures..! everything on this car is CUSTOM except the engine.. we dont have the money to get a decent rebuild..we use stock suzuki 600 motors.

[zixian]

the blue and red car are the same chassis and have 105horses unrestricted, 4 mikuni carbs, and 550ish pounds wet0-60mph in 3.5 seconds
the black car is 470lbs and about 70-80horse but it is alot faster than the older car was while it was restricted.. BTW our resitrictor is 20mm in diamter ONE resistrictor..... these cars have seqential 6speed wet clutchs.. the same ones as the motor bike for obvious reasons.. they have 7inch wide slicks and we can still spin(if we are having fun) in 5 gears...and we have a torsen ATB rear diff
right now we are designing a new chassis and we are turbocharging the car with a garret gt12 turbo... with some good softcompound tyres we should be able to demolish our previous acceleration times... soo between three merkurs and these three cars and school i somehow find time to eat

also we are making a carbon fiber body right now for the new car

[rslater]

92 TSi Awd

[Knight202]

Here is my Ride

Custom 1984 Toyota Supra, P-type

Its currently about 80% done in the bodyshop. I will be out to 2006 shows this year, so find me and say hi!

Current Exterior Mods:

Shaved Antenna

Shaved Front Emblems

Shaved front headlight washer nozzles

Shaved Side Moldings

Eliminated Rocker panel addons

Shaved B pillar cover emblems

Custom Fender Flares

Rear hatch (might convert to a slick ferrari looking back end, hard to explain, Currently its stock)

Eliminated Rear hatch wing

Custom 2 tone paint job, (Chrysler black cherry & Chrysler bright white base covered in White & gold pearls

-------------------------------------------
Interior Mods

Currently still stock, same goes for the engine. Here are some pictures

--------------------------------------------







There ya are, if you would like to see more, you can go to the following link!

My Cars Website

[Canadian_Si]

2006 Civic Si

www.cardomain.com/id/canadian_si

[raymond_87]

[Lageno]

Only mine is in 2 tone black and silver with the factory bodykit

[Real Talk Sucka]

1990 integra RS full GSR swap tons more.

[Sunfighter]

My new addition.....



Pretty much the most blue car I'v ever owned.

[Demosthenes X]

1999 Honda Civic Hatch (EK)






Exterior Mods
-17" wheels wrapped with 205/40R17 Khumo Ecstas
-Shaved rear emblems
-Painted brake calipers

Interior Mods
-Pioneer Premier MP3 deck with iPod input
-Pioneer speakers
-Pioneer 200W amp
-MTX 15" sub

Upcoming Mods (when I get less lazy/cheap)
-M3 style LED mirrors
-Short-throw shifter
-D16Y8 mini-me
-Tint the back three windows
- ~1.5" drop

[odishaw]

nothing great yet.. workin on er'

[JD35]

heres my piece

[Brainchild]

Here is my humble little FWD 1990 Laser and the latest incarnation of it's 2.0L brought to life only 4000km ago.






Mods:
-Custom K&N intake
-GM 3" MAF + Translator
-EVO 16G Turbo
-Walbro 255lph fuel pump
-RX7 550cc injectors (too small)
-ApexI SAFC
-HKS 272* Cams
-Nitrite coated oversized valves
-3G DSM Lifters
-Custom 8.5:1 Pistons
-Slowboy Racing 3500 carbon Kevlar clutch kit
-Phenolic Intake Spacer
-Slowboy LSD tranny insert
-DSM Front big brake kit
-Mitsubishi Starion FMIC 2.25/2.5" hard pipes
-2.5" exhaust
-Custom urethane motor mounts
-Progress Tech springs
-1997 Talon AWD alloy wheels
-Falken ZE512 rubber
-2x 10" Pioneer IMPP subs
-1x Kenwood 600W amp
-Clifford/Louisville Slugger Alarm
-Way too many other little things to even bother remembering let alone listing


Once I get this thing up to full potential, and 25psi with the new ECU programming, it's definately off to the dyno with it.

[metal]

Stock for now, Racing Beat catback is the first addition coming soon..

[h0tSX]

[iambuRnz]

some of you probably seen me buzzing around vic.. anyway heres my teal hatch..

few months ago



as she sits now..

http://www.myfilehut.com/userfiles/v...bago%20021.jpg

+some spoiler bought from kyle..


thats all

[whitemiscief]

and I just bought this frame! to rebuild the grey DH bike above

[ChryslerTech]

Here's my beater. Just needs some 295/40-24s

[Lageno]

Recent picture of my car:

[PhEnX]

Freshy

[metal]

Most recent pic of mine

[metal]

New pics

[rabidhamsterfab]

okay.. I guess it's time to throw up some pics

the 71 650 yammy chopper



the mods list is kinda long, and I don't know them all

the 64 F100 Shortbox





suspension:
- 74 Olds wagons front clip
- rear helper airbags

Driveline:
- mild bolt on 305 (theres a 383 being redone sitting in teh shop right now )
- fully built TH350
- 10 bolt GM rear axle... 8.25 I think.. it's from the same 74 olds wagon

body:
- shaved emblems, except new ford Emblem on tail gate
- Bronco Tail gate modded to fit
- 74 olds Rear bumper/taillights molded on
- billet wiper arms
- custom bent billet antenna

Rollers:
front - 215/50/15 BFG Radial TA's
Rear - 275/60/15 BFG Radial TA's

Rims are 15inch Boyd coddingtons I dunno which model .. but they have been discontinued for a few years..fronts are 15x7.. and rears are 15x9.. I think..

and finally.. the datsun







Mods
...uhhh... Torn apart!

the build list is kinda huge.. so I won't bother.. but it includes Nissan, Toyota, Ford and subaru parts

[dash8311]

'00 SiR