DIY: bong *yes it's what you think it is*
 

:high:
things you'll need
-any glass bottle. i used a leftover absolut vodka bottle from a previous drinking night 750ml
http://img26.imageshack.us/img26/3108/01102010270y.jpg
-you'll need a diamond tip drill bit to drill a hole in the glass without shattering the whole bottle
-$20 at canadian tire but i just borrowed one from a buddy.
-electric drill.
-down stem + bowl bought from the gift store beside the vapour lounge in downtown. $10 for stem, $25 for bowl
-GE silicone sealant II approx $5 for a whole stick. already had some at home.
total spent: $35 - stem and bowl
http://img295.imageshack.us/img295/3130/01102010273.jpg

measure the angle you want the down stem to be positioned, then measure the approx location that would be best to drill the hole.

then drill the hole. have the down stem handy so you can see if it's angled to your liking yet or not. if not, keep drilling the hole so the bottom part is longer... oval-like.
*oh did i mention? it's good to have water running over the hole you're drilling to keep the temperature constant. otherwise the glass might overheat while drilling and crack.
http://img40.imageshack.us/img40/9601/01102010271.jpg

now that's done, i used some GE silicone sealant II to keep the down stem in place and seal up the sides from the hole i drilled.
wait couple hours for the silicone to cure.
then you're good to go :)
end result= http://img545.imageshack.us/img545/6646/02102010276.jpg
and it worked pretty damn well :high:

when i saw the bottle i immediately thought of this lol
http://img.photobucket.com/albums/v4...bong-vodka.jpg

^ same here haha

We used to make sobe bongs out of sobe bottles. good times

coke can FTW

couldn't this be viewed as illegal in a sense since bongs are mainly intended for use of illegal substances. surprised this is allowed, hope cops dont see this

metal poisoning FTL

LOL
I have this exact bottle sitting on my desk.
Half empty.. :)

where can i buy the skull vodka bottle??

i remember kid carson was talking about it on the beat radio station couple mornings ago.

Well, I have 2.
First one I bought it at Sammy J's cause I kept buying rounds of it. Cleaned out the bottle. My friend who works at the bar gave it to me. This was Last Summer.

One sitting on my desk, my friend gave it to me before he went to HK. No idea where he got it from though.

Can be purchased at BC liquor stores.

http://www.bcliquorstores.com/product/56663

any BCL will have it

http://www.bcliquorstores.com/produc...3#WhereToBuyIt

Im gonna grab one thx to this thread

Yet, there are stores everywhere in the world that sell bongs.

they don't call me the mcgyver in bong making for no reason! :) :)

a recent project me and my friends had ( but was delayed for a long ass time because noone had a diamond drill)

http://www.crystalskulls.com/images-.../0609--103.jpg

we also found from a store a downstem diffuser with a BOWL that was clear-glassed and shaped like a skull :D

it was preety epic.. no pictures of the finished product though.

been trying to find this one for the last 2-3 years locally so i can try and diamond cut a custom glass piece

you can buy a bong for 35 bucks lol
you can acctually buy a bong for 20

^go big or go home

get a ROOR,TORO,SHELDON BLACK or SOVERIGNTY

NOW WERE TALKING!

Just bought me a Crystal Head Vodka bottle gotta say its pretty cool and comes with 2 little skull cups as well for 65 bucks

also went to the BCL on tyne and Kingways and them said this has been very popular of late I got their last one before the new shipment arrives..

also Vansterdam you mind PM photos of the finished product I'm trying to decide where to drill into the skull and could use ur as a reference

that's true...but those ones are usually pieces of shit!
poor quality.

i saw some cheap ones at the bcmp store
they were about the size of a baseball for $30-40
not bad looking but it's a pretty small hit.

Bcmp is kinda a ripoff.

They got good glass blown by local glass blowers but I recommend you check out one of the PUFF stores
Posted via RS Mobile

puff on main and 13th? was gonna check that one out before i bought my bowl from bcmp but their open hours is the exact times i'm at work. >.<

^ proud to say im a weekly regular LOL

the shitty part is sometimes (happens preety dam often)

when i get to the store the person there is MIA , either on lunch break or is away from the store for 30-45 minutes

preety shitty cause i sit there and wait anyways lol

Look what i made - works great
http://i846.photobucket.com/albums/a...Attachment.jpg

a bit worried about the angle of the down stem.
shouldn't it be angled more vertically than horizontally??