REVscene Automotive Forum

REVscene Automotive Forum (https://www.revscene.net/forums/)
-   Vancouver Auto Chat (https://www.revscene.net/forums/vancouver-auto-chat_173/)
-   -   Official "What I just bought for my car" thread (https://www.revscene.net/forums/669983-official-what-i-just-bought-my-car-thread.html)

knight604 06-30-2015 10:19 PM

brahhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh

CF ALL DAY

http://i.imgur.com/Tp4hO71.jpg

ime2006 06-30-2015 11:19 PM

Quote:

Originally Posted by knight604 (Post 8654736)
brahhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh

CF ALL DAY

http://i.imgur.com/Tp4hO71.jpg

I am thinking getting one too.
Would you please, pm me where you got it from ?
Appreciated it !!!!

PandaDog 07-03-2015 12:32 AM

Can't wait to see how these turn out, bought these for the VX

http://oi59.tinypic.com/qohefn.jpg

rice cooker 07-08-2015 10:44 PM

1 Attachment(s)
yes

Mr.Jay 07-11-2015 02:24 PM

http://i1251.photobucket.com/albums/...psjt156wdg.jpg

6266

CCA-Dave 07-17-2015 10:49 AM

https://farm1.staticflickr.com/371/1...79de4a9c_c.jpg

Motor, ECU and wiring harness for the next beetle project has been acquired. Just have to release it from the rest of the shell.

-Dave

white rocket 07-24-2015 11:14 PM

These should be fun!

http://i81.photobucket.com/albums/j2...ps9nibcqbq.jpg

Akinari 07-26-2015 11:23 PM

Well an unfortunate event today has sparked an impulse buy of a bunch of parts again :badpokerface: Was driving on the highway and saw a rather large rock flying towards my car from the opposite direction, I thought my windshield was toast (again...for the 3rd time) but thankfully the rock fell quicker than I expected and I heard a loud thump as it presumably made contact with my bumper. Unfortunately, instead of the rock hitting the large grey plastic expanse of my bumper, it hit the silver bumper garnish in the lower centre area of the bumper, creating a couple very annoying and visible deep scratches on there. Didn't want to paint it or wrap it or whatever so I purchased a new OEM one for $45 USD :alone: The existing one is slightly discoloured and dented up from 11 years and almost 300,000kms of driving anyway, so it was time for a new one.

http://i.imgur.com/k0S2mH0.jpg

And since the front bumper has to come off to replace the damaged bumper garnish, I figured I'd yank the headlights out at the same time which also requires bumper removal, clear the amber corners and finally get around to doing a projector retrofit :alonehappy:

Bought the Nilight H1 projectors off Amazon which seems to get stellar reviews. $42.99 USD can't complain, especially for the supposedly awesome performance.

http://ecx.images-amazon.com/images/I/41BOgW%2BcStL.jpg
Amazon.com: NilightŪ 2.5" MINI HID BIXENON PROJECTOR LENS FOR H1 BULB CAR GIFT:CHROME SHROUND: Automotive

Ordered a pair of H1 HID bulbs as well from VVME to replace my current H4 bi-xenons once my H1 projector retros are installed.

Going to need to locate these clear side markers as well to match my clear corners once I open up my headlights, but these are getting extremely difficult to find so gonna need to keep my eyes peeled

http://www.valuepicturehosting.com/a...sidemarker.jpg

Also toying with the idea of sticking on an EZ lip...

UPDATE: Bought the last EZ Lip in stock at the South Surrey Cambodian Tire LOL

a00755836 07-27-2015 04:18 PM

http://memecrunch.com/meme/2EPN9/eve....png?w=400&c=1

Reeyal 07-28-2015 06:04 AM

Quote:

Originally Posted by a00755836 (Post 8664486)

One has more disposable income for car parts while not married and having no kids :awwyeah:

Matsuda 07-31-2015 10:40 AM

Got my raceseng slammer shift knob this morning. 635g

https://scontent-sea1-1.xx.fbcdn.net...81184733_o.jpg

compared to old d1 spec weighted shift knob
https://scontent-sea1-1.xx.fbcdn.net...53310338_o.jpg

SpartanAir 07-31-2015 10:03 PM

Could crosspost this in the "what did you just buy for you car" thread, but I guess it belongs here ultimately...

After a painstaking 4 month wait for a delayed container, my shipment from Japan arrived!

I ordered large parts off of Yahoo auctions, through Right Drive Parts in Ontario. Kept my shipping charges down by putting them in their container, but due to the LA port strike it kept getting delayed. So lame!

But now I have my parts installed: Genuine Autech 260RS front bumper, rare NA slat grille with badge removed, and Dayz rear hatch spoiler with LED brake light.

Spoiler was easy to install, had to drill a hole for the wire...but removing the old damn adhesive and polishing out the old marks from it took over 2 hours :(

At last, finally how I want her to look though :fuckyea: Pretty sure I have the only Series 2 front end in Canada!

http://i211.photobucket.com/albums/b...015_122719.jpg
http://i211.photobucket.com/albums/b...015_180603.jpg
http://i211.photobucket.com/albums/b...015_173412.jpg
http://i211.photobucket.com/albums/b...015_173332.jpg

ime2006 08-01-2015 10:42 PM

New shoes...Finally, put them on.

But didn't do alignment.
High speed felt a bit vibrating.
Going to have TSS do the alignment on Wednesday.
Hopefully, vibrating goes away.

http://img.photobucket.com/albums/v1...a/IMGP0162.jpg

http://img.photobucket.com/albums/v1...a/IMGP0166.jpg

http://img.photobucket.com/albums/v1...a/IMGP0161.jpg

http://img.photobucket.com/albums/v1...a/IMGP0156.jpg

http://img.photobucket.com/albums/v1...a/IMGP0168.jpg

http://img.photobucket.com/albums/v1...a/IMGP0145.jpg

meme405 08-02-2015 01:18 PM

^Did you lower the car at the same time?

Just changing the wheels shouldn't need an alignment.

If you have a vibration it sounds like a balancing issue, not alignment.

Looks legit though...

ime2006 08-02-2015 02:02 PM

Quote:

Originally Posted by meme405 (Post 8666675)
^Did you lower the car at the same time?

Just changing the wheels shouldn't need an alignment.

If you have a vibration it sounds like a balancing issue, not alignment.

Looks legit though...

I have this question posted in another thread.
http://www.revscene.net/forums/70465...installed.html
Got the Same answer as you mentioned.

The car was lowered a month ago with Stock rims/tires.
And it is equipped with Air Suspension.
So, It was just a link adjustment to have my car lowered.
And no vibration till new rims/tires swapped.

Already booked with TSS to have a look my car on this Wednesday.
The new rims/tires were installed from different place.

meme405 08-02-2015 02:42 PM

Quote:

Originally Posted by ime2006 (Post 8666685)
I have this question posted in another thread.
http://www.revscene.net/forums/70465...installed.html
Got the Same answer as you mentioned.

The car was lowered a month ago with Stock rims/tires.
And it is equipped with Air Suspension.
So, It was just a link adjustment to have my car lowered.
And no vibration till new rims/tires swapped.

Already booked with TSS to have a look my car on this Wednesday.
The new rims/tires were installed from different place.

Not gonna look in the other thread, but you should get an alignment for the lowering; however, I am doubtful that's your problem.

TSS has a corgi tire machine, so they can spin the wheels to make sure they are balanced. I'm almost positive they won't be, so they will probably have to balance the tires again.

extracrunchie 08-06-2015 07:49 PM

2 Attachment(s)
Bought a rrc intake manifold for my tsx and morimoto led fogs lamps with lamin x film
Attachment 25405

Attachment 25406

Kaolinite 08-06-2015 07:53 PM

ordered a 2016 WRX jdm grille from the dealership for $95 :D

tastic 08-13-2015 12:32 PM

Not directly for the car, but for the tools I use on it! Finally got all my sockets organized...was tired of wasting so much time looking for stuff.

Red trays are SAE, blue are metric and misc. Now for the tool chest/drawer system to put them in.http://images.tapatalk-cdn.com/15/08...4301286d49.jpghttp://images.tapatalk-cdn.com/15/08...ebe4f36177.jpg

The_AK 08-13-2015 12:40 PM

^wow sick setup

BABU 08-13-2015 05:54 PM

^tastic super nice set up! Here is my home made foam tray.
http://i.imgur.com/l9JLH7J.jpg

xXSupa 08-17-2015 07:51 PM

Now I wait. Gonna be the longest 7-10 days of my life.

http://scontent.cdninstagram.com/hph...06649938_n.jpg

hud 91gt 08-17-2015 08:25 PM

tastic, where did ya buy the holders? Freakin expensive at C-tire.

tastic 08-17-2015 10:30 PM

They were on sale on Amazon a couple weeks ago for $20...seems to be back to the regular $30 price at the moment.

Lowered_Klass 08-18-2015 12:11 PM

I'm pretty sure I've seen something similar at Princess Auto, but can't for the life of me remember how much. Willing to bet it's cheaper than CT though.


All times are GMT -8. The time now is 10:31 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net