You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
If you have any problems with the registration process or your account login, please contact contact us.
REVscene MotorsportsRS Motorsports by The Speed Syndicate RS Race Team
Pitt Meadows & Mission Raceway. Organize Race Pre-meets, post Racing related event Pics and discussion. In collaboration with The Speed Syndicate, Official race events presenter. [Solicitation of Professional Racing Events Allowed]
Eh used tires are fine. A good opportunity to try different tires haha. While not optimal conditions, still worth it imo. Most of the time at least.
Yes, still friends with this person, he's helped me out a ton in other ways. But I'll probably will never buy anything used from him again. While it's not his fault (I doubt he could have known), he's definitely the kind of person that lowballs others and thinks his parts are worth more than they are. I technically only over paid by $75 so whatever. While I normally wouldn't consider purchasing anything from this friend, I was in a pinch and wanted to shave 2 seconds. I wasted my last track day, drifting. Wasn't a total loss tho, learned a bit more about feedback from the car.
I think the CRS had about 8 events on it. I'm just shocked because I've gone through 2 fronts while using that pair of rears, and it still has more usable life than the new to me CRS.
In regards to the RS4, they last so long that I've used the same set on two different cars hahah. And also purchased another set of them used with very minimal tread left, but those were like $200 for the set. Still got me another 3-4 track days, with the rears very much alive. Which I proceeded to do another few track days on the rears . They literally last forever, the issue is if they heat cycle out and you put them on an axle that doesn't get heat.
RE71RS does melt. The first 40% melts quickly, but the pace of wear slows down significantly after that. Then it feels like it lasts forever, and it's even stickier as it gets closer to cords. I probably said "I'll get one more day out of this set" 2-3 times lol.
Sent from my SM-G781W using Tapatalk
Advertisement
__________________
|| 18 FK8 | R-18692 | Rallye Red | 6 MT ||
|| SOLD 97 E36 M3 Sedan | Arctic Silver | 5MT ||
|| RIP 02 E46 330ci | Schwartz Black II | 5MT | M-Tech II | Black Cube | Shadowline | Stoff Laser/Anthrazit ||
|| RIP 02 E46 M3 | Carbon Black | 6MT ||
Try those Nankang CRS. It's a great 200TW tire with fantastic grip and control. It'll last longer if you can do a proper initial heat cycle, and then let it cure for at least 24 hrs.
Quote:
Originally Posted by bcrdukes
I'm curious how many days the CRS were used to the point of being heat cycled out? I read on various forums that the RE71Rs wear really fast, but unsure of heat cycling. For my next tire, I am on the fence of continuing with an endurance tire such as the Hankook Ventus RS-4. While they are great, they last too long (FWP) and it doesn't give me the opportunity to try other tires to experiment a bit more. (Insert world's smallest violin.)
__________________
Quote:
Originally Posted by westopher
The whole world has gone down a road no one can recover from, and it's nothing to do with governments, it's because so much of the general public is so fucking stupid.
Try those Nankang CRS. It's a great 200TW tire with fantastic grip and control. It'll last longer if you can do a proper initial heat cycle, and then let it cure for at least 24 hrs.
Oh man, would be nice to do a proper 24 hour heat cycle. Our club DE weekends are Saturday/Sunday back-to-back.
Oh man, would be nice to do a proper 24 hour heat cycle. Our club DE weekends are Saturday/Sunday back-to-back.
For the typical track enthusiast, the easiest / most practical way to do this is to just do a shortened scrub in session with the new tires on a separate set of wheels. Once the new tires are scrubbed in, you swap them out and set them aside. Then you continue with the rest of your track day on another set of tires, and you save the new tires for the next event.
__________________
Quote:
Originally Posted by westopher
The whole world has gone down a road no one can recover from, and it's nothing to do with governments, it's because so much of the general public is so fucking stupid.
For those of us who can't afford two sets of track wheels, we usually go to uh Mexico and find a couple of on-ramps. Do some loops and call it good enough.
__________________
Quote:
Originally Posted by PeanutButter
Damn, not only is yours veiny AF, yours is thick AF too. Yours is twice as thick as mine.. That looks like a 2" or maybe even 3"?
Great driving and great weather at CTMP this past weekend. Saturday was pretty hot, but Sunday was nicer with a breeze with overcast. Track conditions were perfect. Learned some new passing lines, recovery techniques, and strategies on how to maximize the balance of the car to carry the most speed into the apex. Outside of the GT cars blasting past me on the straights, I'm on their tails a majority of the 20 minute sessions, including a handful of passes earned.
Spent the weekend at Merritt Airport doing Auto-X - some of the fastest courses I've been on. A few power cars were touching 180kph on the straight! Second day they slowed the course significantly to reduce the speed and allow the momentum cars to keep up a bit better.
After the last run the car developed a nasty exhaust leak and rattle, hoping it's just some bolts that loosened up thanks to the heat (35c the second day) and dual driving.
__________________
Quote:
Originally Posted by PeanutButter
Damn, not only is yours veiny AF, yours is thick AF too. Yours is twice as thick as mine.. That looks like a 2" or maybe even 3"?
Not to steal roastpuff's thunder, but I just ran the GoPro footage from my weekend and some interesting results from the last session on Sunday.
My average lap times last season were between 1:55 to 2:05. After this past weekend, there's an evident improvement in the high 1:40s to 1:50s mark. The higher times are due to traffic and slower GT cars in the pack. Nice to see my quickest lap of 1:47:15 based on the new drive lines learned and smoother balance and control of brake, throttle, and steering angles. As the saying goes: If you can drive a slow car fast..
Would you say its worth bringing a high HP car to this track?
I havent had much fun driving anything over 200hp on a auto-x course
I guess this event probably also changes the layout, and will avoid putting a 180 zone in for future events
To this track specifically yes, but I think the speeds were getting a bit excessive for everyone's comfort - it led into a slalom and we had a few blown braking zones and people going off-roading. Day 2 you could still hit 130+ with a high HP car.
Had to remove the cones from the runway overnight so Day 2 they decided to slow the course down a bit so that the risk of going off was less.
__________________
Quote:
Originally Posted by PeanutButter
Damn, not only is yours veiny AF, yours is thick AF too. Yours is twice as thick as mine.. That looks like a 2" or maybe even 3"?
From my own experience/opinion about the Merritt event (which was fantastic!), was that the two days were meant to be slightly different (fast & less fast). You always get Corvette people wanting a fast and open course, versus Miata people wanting something tight with lots of turns. After speaking with some people in the first heat of the first day, they were a little intimidated, but after doing my own runs I didn't find it that bad.
From my own experience/opinion about the Merritt event (which was fantastic!), was that the two days were meant to be slightly different (fast & less fast). You always get Corvette people wanting a fast and open course, versus Miata people wanting something tight with lots of turns. After speaking with some people in the first heat of the first day, they were a little intimidated, but after doing my own runs I didn't find it that bad.
I think the course is quite intimidating for those of us who are used to much lower speeds at Mission and PM as it is quite the change from those tight little corners that we usually get.
I was more comfortable and trusting of the car by Day 2, I think that helped. Trusting the suspension and tires more and more.
__________________
Quote:
Originally Posted by PeanutButter
Damn, not only is yours veiny AF, yours is thick AF too. Yours is twice as thick as mine.. That looks like a 2" or maybe even 3"?
Isn't Packwood also quite fast? Not quite 180 I guess. I think the absolute fastest I got at PM was 100 on a very wide slalom into the stop box. They had to slow it down through that day as people weren't stopping quick enough and a few blew through the box.
Packwood is also a wide open pad, and course designs can afford to have a good amount of runoff (buffer) space. Whereas with the Merritt airport runway, when it is that wide, it is that wide.
__________________
Quote:
Originally Posted by westopher
The whole world has gone down a road no one can recover from, and it's nothing to do with governments, it's because so much of the general public is so fucking stupid.
Not to steal roastpuff's thunder, but I just ran the GoPro footage from my weekend and some interesting results from the last session on Sunday.
My average lap times last season were between 1:55 to 2:05. After this past weekend, there's an evident improvement in the high 1:40s to 1:50s mark. The higher times are due to traffic and slower GT cars in the pack. Nice to see my quickest lap of 1:47:15 based on the new drive lines learned and smoother balance and control of brake, throttle, and steering angles. As the saying goes: If you can drive a slow car fast..
I went to CTMP / Mosport for the first time a few weeks ago and was on track in a rented Radical along with a buddy. That track is nothing short of terrifying, especially in an open cockpit / downforce car, good lord.
Nice lines! I love that you didn’t even use your brakes!
Edit: @Mark - When are you out here next? Radical comes out in full force usually after the PCA DE events. Last month, they showed up on Sunday, May 3, and seeing them setup was quite a spectacle. The amount of money in that program is insane.
From the video, it seems to me that you were fighting the steering quite often, but since I have no experience in a Radical, I dunno if that is just the nature of the beast, or whether it was something else.
Quote:
Originally Posted by lowside67
I went to CTMP / Mosport for the first time a few weeks ago and was on track in a rented Radical along with a buddy. That track is nothing short of terrifying, especially in an open cockpit / downforce car, good lord.
The whole world has gone down a road no one can recover from, and it's nothing to do with governments, it's because so much of the general public is so fucking stupid.
That track is bumpy as heck, blind, and very fast/high commitment. Example:
Turn 1: 5th gear, no brakes, lift, hit HUGE bump, hug inside concrete wall, flat to exit (nasty rumble strip if you overcook)
Then turn 2: 6th gear, 100% blind, off camber so if you over cook, you're going out to the tire wall, no brakes, and complex double apex
My favourite is turn 8: 6th gear, lift, turn in at 200km/h, don't miss the apex - split second to get the braking done and down to 4th while going from loaded up turning right to loaded up turning left.
The guy who rented the car after me on the next day stuffed it in turn 8 into the wall on lap 3.
Good times!
Mark
__________________ I'm old now - boring street cars and sweet race cars.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
. They literally last forever, the issue is if they heat cycle out and you put them on an axle that doesn't get heat. 
