[TRI] FS: 1985 MR2 NA built Smallport swap

[OvenRoast]

***SOLD***

Unfortunately it's time to sell my MR2 due to a lack of storage.

1985 Sunroof MR2 NA with built Smallport 4AGE

Engine:
Smallport 4AGE
TRD head gasket
Block and head decked making 11.4 compression
3 angle valve grind
.5mm oversized toyota pistons and rings
Cylinder bore
All new bearings
Crank Grind and balanced
Blacktop 20V flywheel (lighter than stock 16V flywheel)
New exedy clutch
All machine work done at Alec's automotive
Whole build done by 86Tuning
Mocal thermostatic oil cooler sandwich plate
Stainless braided -10AN oil cooler lines
-10AN fittings
Earls 5.8 x 8.25 oil cooler
315cfm electric fan (for oil cooler)
New distributor
New cap and rotor
New HT wires
New plugs
Made 120whp in an AE86.
38,000 km give or take from build

Suspension:
Knoi yellow adjustable shock inserts
Eibach pro-kit springs
Prothane poly bushings
Twos-R-Us Stainless rear tie rods
New front inner and outer tie rods
New front lower ball joints

Wheels:
Enkei J-Speed 15x7 front, 15x8 rear
Khumo Ecsta V720 205/50R15

Brakes:
EBC Slot and dimpled rotors (front)
Factory Toyota rear rotors
EBC green stuff pads all around
ATE Type 200 brake fluid
Stainless Russel line all around

Body:
Painted yellow by 2 previous owners (not the best job)
Rust bubbling on both rear wheel arches (see pics)
Scratches around on front and rear bumpers
Front bumper paint wrinkled and flaking off due to previous front collision (body still straight)

Others:
Solid brass shifter bushings
Personal steering wheel
Momo shift knob
Glow shift oil pressure gauge
No rear firewall carpet
Battery temporarily mounted in trunk
Sleepy eyes with 6" led light bars (Can be converted back easily)
Sparco R100 driver seat
Oil catch can
Optima P680
Driver side C-pillar trim missing. (Have new Toyota OE screws and nuts for trim)
240,xxx km on body

Comes with many parts such as new TRD headgasket, Valve covers, muffler system (needs extra pipes added and welded), deck (not installed), sunroof cover, 4AGZE injectors (fully cleaned), color matching wing, some random gaskets, etc
Has misfire at warm idle because it's running on bigport ECU. Either plug in a smallport ECU or install a stand alone ECU and it will run MUCH better. Still many things I'm forgetting.
Also includes oil analysis from blackstone laboratories from 8000 km's ago.

$3250obo. ***$2600 UP TILL SUNDAY SEPT 25***

If interested, feel free to PM me or text 6048684908

***SOLD***

[OvenRoast]

SOLD