| Vancouver Auto Chat 2016 VAC Community Head Moderator: Raid3n |
 |
09-15-2009, 09:12 AM
|
#1
|
|
I contribute to threads in the offtopic forum
Join Date: Nov 2001
Location: Vancouver
Posts: 2,746
Thanked 70 Times in 17 Posts
Failed 3 Times in 2 Posts
|
Quick question re: Offset of wheels
Might be a noob question, but just wanted to double check with people that are in the know...
If my car uses stock 17x7 +55 offset wheels, is it safe to replace them with wheels that have a lower offset? i.e. +35, +40, +45
I know this probably should go in the wheel/tire tech forum, but i'm looking for a quick response so I can decide whether or not to buy some wheels asap.
Thanks!
|
|
|
|
09-15-2009, 09:43 AM
|
#2
|
|
Banned (BBM)
Join Date: Jul 2004
Location: Vancouver
Posts: 16,142
Thanked 627 Times in 368 Posts
Failed 1,106 Times in 390 Posts
|
yes, but only to a certain extent
for example
my car is 17x7.5 45 offset stock
and im running 18x8.5 31 offset
rim size x x number (the width of the rim) offset pushes the rims further out
if u are going for extreme setup, fenders may required to be rolled. Depending on what car, what do you drive?
|
|
|
|
|
09-15-2009, 09:48 AM
|
#3
|
|
I contribute to threads in the offtopic forum
Join Date: Nov 2001
Location: Vancouver
Posts: 2,746
Thanked 70 Times in 17 Posts
Failed 3 Times in 2 Posts
|
2010 wrx 265
so stock is +55
i'm thinking about getting some 17x7 +40 wheels...
is that ok?
Last edited by What_the?; 09-15-2009 at 10:01 AM.
|
|
|
|
|
09-15-2009, 09:54 AM
|
#4
|
|
Banned (BBM)
Join Date: Jul 2004
Location: Vancouver
Posts: 16,142
Thanked 627 Times in 368 Posts
Failed 1,106 Times in 390 Posts
|
yup totally fine, but depending on how wide on the rims as well
|
|
|
|
|
09-15-2009, 09:58 AM
|
#5
|
|
Banned (BBM)
Join Date: Jul 2004
Location: Vancouver
Posts: 16,142
Thanked 627 Times in 368 Posts
Failed 1,106 Times in 390 Posts
|
checking fitment for you right now
pmed u
|
|
|
|
|
09-15-2009, 10:05 AM
|
#6
|
|
Media Officer / MOD
Join Date: Apr 2001
Location: vancouver
Posts: 28,088
Thanked 5,771 Times in 1,733 Posts
Failed 86 Times in 64 Posts
|
google
offset calculator
i remember there's this one from a miata forum which was very useful
|
|
|
|
|
09-15-2009, 11:17 AM
|
#7
|
|
How I Mod your mother
Join Date: Jul 2004
Location: Crayon Box
Posts: 13,688
Thanked 977 Times in 477 Posts
Failed 18 Times in 11 Posts
|
Subaru?
Go wide or go home
__________________
Quote:
|
[19-07, 16:52] bloodmack: EB did u change my avatar and title?
|
Quote:
|
[19-07, 16:54] El Bastardo: bm i have no idea what you're talking about because i don't speak gorilla
|
|
|
|
|
|
09-15-2009, 11:32 AM
|
#8
|
|
Banned (BBM)
Join Date: Jul 2004
Location: Vancouver
Posts: 16,142
Thanked 627 Times in 368 Posts
Failed 1,106 Times in 390 Posts
|
go home
|
|
|
|
|
09-15-2009, 11:35 AM
|
#9
|
|
Wunder? Wonder?? Wander???
Join Date: Apr 2001
Location: Vancouver, BC
Posts: 218
Thanked 21 Times in 4 Posts
Failed 0 Times in 0 Posts
|
Use this Offset Calculator:
http://marksink.com/tire_wheel_offset/offset.html
From 17x7+55 to 17x7+40:
Quote:
The clearance from stut housing to the inside of the wheel will be 15mm MORE
The outside edge of the wheel will EXTEND an extra 15mm
|
Then you can check yourself whether there are any clearance issues.
|
|
|
|
|
09-15-2009, 11:59 AM
|
#10
|
|
I *Fwap* *Fwap* *Fwap* to RS
Join Date: Aug 2006
Location: Vancouver
Posts: 1,599
Thanked 492 Times in 125 Posts
Failed 104 Times in 21 Posts
|
Quote:
Originally Posted by Draft
Subaru?
Go wide or go home
|
+1
|
|
|
|
|
09-15-2009, 12:02 PM
|
#11
|
|
14 dolla balla aint got nothing on me!
Join Date: May 2006
Location: richmond
Posts: 1,072
Thanked 357 Times in 126 Posts
Failed 3 Times in 3 Posts
|
+2
plenty of older model subaru owners ran 18x10s with low offsets.
hellaflush.com
|
|
|
|
|
09-15-2009, 12:07 PM
|
#12
|
|
I *heart* Revscene.net very Muchie
Join Date: May 2001
Location: Burnaby, BC
Posts: 3,564
Thanked 330 Times in 163 Posts
Failed 182 Times in 61 Posts
|
Quote:
Originally Posted by Mugen EvOlutioN
yup totally fine, but depending on how wide on the rims as well
|
This is key... depending on the car of course.. but if you run too high an offset, and your car is next-to-slammed... you may run into problem if you carry heavy loads or have fat-assed friends.
My stockers were 6" wide rims with a 40mm offset, I ran 8" wide rims with a 35mm offset, then the wheels stuck out too far and rubbed on the rear quarter panel if I had lots of stuff in the trunk or a full load of people. 
If there's a template available... you can print out the rim clearance and hold it up to your rotor/drum and see what your clearance will be like for the calipers, etc..
__________________
Don't be the next RS.net statistic - If you drink, don't drive. You'll lose your licence, and the rest of us will laugh at you.
|
|
|
|
|
09-15-2009, 12:19 PM
|
#13
|
|
OWNER/C.F.O./MONEYMAN
Join Date: Mar 2001
Location: Vancouver
Posts: 16,486
Thanked 2,253 Times in 626 Posts
Failed 6 Times in 3 Posts
|
measure the horizontal spacing between ur tire and the fender.
then you can guestimate how wide you can go with a stock wheel set up.
|
|
|
|
|
09-15-2009, 05:33 PM
|
#14
|
|
I contribute to threads in the offtopic forum
Join Date: Nov 2001
Location: Vancouver
Posts: 2,746
Thanked 70 Times in 17 Posts
Failed 3 Times in 2 Posts
|
cool thanks for all the responses everyone
yea, the car isn't lowered, and probably won't be... so as long as i don't deviate too much i'll assume it's ok.
|
|
|
|
|
09-15-2009, 05:37 PM
|
#15
|
|
Rs has made me the man i am today!
Join Date: Jan 2005
Location: North Vancouver
Posts: 3,172
Thanked 1,782 Times in 638 Posts
Failed 50 Times in 22 Posts
|
best place to ask would be on your car specific forum and visit their tire/wheel section, they usually have a post dedicated to wheel fitments on the specific model
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -8. The time now is 09:26 AM.
|
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
