hrmm.. i'll have to look through my big box of supra receits to find that one.. heh

i am doing that as we speak mhg/arp/na cams/full upper end rebuild


the only thing i hopen for is that my block still has good finsh if it does i will pop on mhg if not then i will go compaset gasket


but i getting my studs for like 160 head gaskt for like 350

machine is like 100 bucks and other gakets will cost me like 100 to 200


this is all estment but close


and when i am done i will have my power band that i want caues of the na cams mixed whiht the pistons will rock

Re: MHG install
 

Yeah, ok .... looks about 300 for machining (im not sure the exact cost, it was done by labor hours)

i got the ARP bolts and MHG from suprasport.com

other than that, theres a bunch of other stuff on the receit, mostly
other gaskets and hoses. the "valve grind gasket set" whatever that is, was $334.85

i also got new timing belts, a cylinder head cover and a valve switch over(?) along with new cold start injector and plug wires.

there's a shitload of other minor stuff on here, a lot of it is just cheap stuff like hoses, gaskets and such.

total for labor was 9 hours (im sure it was more than this, my car was in shop for 2-3 weeks) in total this comes to $560 labor and some labor fee's account for machining.

the final price was $2239.95 not including ARP bolts/MHG

hope that helps

anyone else see this on supraforums?

http://www.supraforums.com/showthrea...threadid=40454

damn.. that car kicked ass too :(

well i never raised boost on my car yet, but i think with the fuel upgrade its performance is bumped up a decent amount. if you look at reg's dyno tuning for the lex/550 mod, he loses a bit of torque but gains horse power doing this.

the ECU must have learned the new fuel curves by now, the power feels better today.

hey Enraged, did you figure out what was the problem with your car yet?

no.... my uncle couldnt come over today, tomorrow afternoon probably. i took everything off except the spark plugs, i dont have a socket for them. we took out the plug from #1, and it was REALLY fouled, all black, the electrode was worn quite a bit.... my uncle talked to his freind who is a mechanic, and he thinks that i actually flooded, drying out the piston rings, so they dont seal and i lose compression. so we're going to drop a small amount of oil into each cylinder and change the plugs and wires. if thats not it, its most likely fuel, maybe a clogged fuel filter. so hopefully ill have it running tomorrow... so much for the meet tomorrow..... oh well, im goin to try to be at the minisprint on sunday.

So who is going to minisprint? Paradox? oh ya, whats your real name? mine is Toby.

oh ya, one of my good freinds boyfreind is building up a 50-something ford with a supercharged chev engine, and he has a MIG welder, so looks like he'll be able to help me make some hardpipes!

mini sprints again? cool.. what time?

me names Murray btw

cool, i need some hardpipes to go down to the I/C, or perhaps just the one in this picture straightened to flow more.
i really dont wanna blow like 400 bux USD on hardpipes :(

well im goin to talk to my instructor atthe welding class, and see if he can teach me how to do 2.5" piping (thats what im using).

the minisprint is on sunday, if my car is running and if i can get a helmet on payday (friday) ill go. if you need a helmet, you can borrow mine, or they have loaners too. http://www.victoriamotorsports.ca/ for info, registration is at 2:30, im goin to try to get there by 2pm though.

you can check out my custom upper IC pipe. it was cheaper than buying the HKS SSBOV kit, and it goes from the throttle body to near the intake. only cost about $225, and the bov used cost me $200 about. the kit sells for more than $600, so im happy with it.

also, anyone need a filter for their turbo MK3? im goin to make my own adapter in class this week i think, then buy a universal K&N filter for about $70-80. alot cheaper than a FIPK, and it does the same thing. if anyoen wants one, i'll make one for you for cheap (liek $20 or something)

i get to play with the plasma cutter :D

well i whent to meet and lots of honda not many toyota's we got to do some thing about that don't you think

ps some of thous honda are pushing so much nos to kill them selfs


but all around it was fun i enjoyed it just can't wait to get my baby onthe road for next week some people wan tot see my car so we all should show em what toyota is all about

damn straight

this sucks, I'm in courtenay missing out on all the action
in vic. But rest assured that before I go to alberta this summer I'll bring my car down that way to a meet, garett92Z will let me know when a meet is next month and I'll take time off to bring my
stock ride down, (stock till winter) :) talk to ya later
Oh do any of you guys use TRD stuff on your rides

TRD stuff? hrmm not me. i havent seen many good aftermarket stuff from TRD for MK3 supra's

hey Nashman which Rx7 did u go up to the meet in? get any pics?

naaa stuiped me i forgot my god dame dig camra

my frined rex was not in any of the pic so far case it kinda stock right now but he does have pedle woooo stay away or he will killz you with hez master drive skills ehhehe

the pedals add skillzz sorry greg had to do that but you are getting better at stander and one day be better then me (maybe if i never drive again ) hehhee you going to key my car for that right


oh as for trd

there is very few parts that are good and most you can not get
caues there in japan or not made any more

there clutch is nice/the springs are nice don't know much about the sway bar as they don't make em any more far as i know of but i can be wroung

there alot more but it all jdm and very hard to find


oh i have one trd thing it shift nob blooy thihng cost me like 109 bucks but it has trd on it

oh joy my studs came in so now i go pic em up it getting close to my car ening ont he road boyz hehehehehe

Hey that's not true, you can see my rex in one pic behind the white celica! :D

Next week I'll have my new wheels and Hopefully a short throw by next paycheck, so it's ok.

ehheheheh thou wheels man will look nice better then phone dials

but you got to get rid of that pitting on you hatch

and that plastic thing fix caues it will just get wore and trap water in and such


and aftre that dasy chain thous flying filter on your car ehhehehehe


but i gut you second dair cats for you it easy as pie


caue sthe guy whiht the red rx7 said it made it sound meaner but not loud and he got more power to boot


but thous tire hummm what the fuck in nexen humm i have not herd much just one buddy of mine said they where for show

so have any of you guys ever herd of nexen tire company befor

n2000's is the modle of tire


got my arp studs hehehe i got sticker. there 150 bucks right there hehehe who cares abotu the stud i love the sticker

my ARP stickers been prouldy stuck under my hood for awhile now :D

i started waxing my car today, and i keep finding new little scratches and shit i never saw before! arggh.. owell, it still looks good! ive got some pics but they didnt turn out too well, digi cam batteries were dying or something...

http://www.realityexit.org/supra/pic...2-supra_01.jpg
http://www.realityexit.org/supra/pic...2-supra_02.jpg

hey is it safe to use wax on the rear bumper cover? a lot of waxes say not to use on plastics like that...

it mean on platic it self if there is paint o it it is fine

ooooo i made my first intake adapter today. 3.5" pipe, i have to test fit it tonight or tomorrow. very messy welds, and a very messy cutting job with the plasma cutter... oh well, as long as it fits, ill give this one away, and make a better one for myself :D

sounds cool, hopefully you can clean it up and use it, did you ever find a filter to put on it?

i waxed the rest of my car today, and painted the calipers and rotors black (woohoo no more gay yellow) it looks good..

http://www.realityexit.org/supra/pic...2-Supra_02.jpg

nice!

IT LIVES! got my car running, my uncle was right, just had to re-oil the rings, and now it purrs like a kitten! i took it for a burn after i put it all back together, let it warm up for a few blocks then vvrrrrrrooooOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOMMMM MMMMMMMMMM*PSHHHHHT*VROOOOOOOOOOOOOOOOOOOOOOM*PSHH HHHHHHT!

hehe i can't believe i lived for 2 weeks without boost! i was deprived severely!

anyways, im going to try making a better adapter tomorrow. the one i made yesterday would do, but it looks pretty crappy. one of the guys in my class suggested bondo to clean it up :D maybe, paint it, then sell it to someone for $20 hehe

total cost for 3 adapters: $7 for 3.5" tubing, 2" long. welding supplies (parents paid for the class) FREE! filter, $76 + tax!

much better than spending $240 on an FIPK IMHO. ill get to making a heat sheild pretty soon too i think, maybe next week.

Nashman mentioned having a little supra meet, well how about we just do it on sunday at the minisprint? 2:30 is registration, and i can see how well my pretyt much stock (aside from HKS SSBOV) can compete with your guys cars hehe. Nashman has a sweet suspension setup, id liek to see it in action.

its supposed to rain on the weekend :(