REVscene Automotive Forum

REVscene Automotive Forum (https://www.revscene.net/forums/)
-   Island Off-Topic (https://www.revscene.net/forums/island-off-topic_147/)
-   -   Let's just talk about , rx-7's! (https://www.revscene.net/forums/52225-lets-just-talk-about-rx-7s.html)

91TII 06-03-2003 11:11 AM

Quote:

Originally posted by NashMan
progrive motor sport is on jhon street right buy auto fx


here is some dritions to there


i going ot go by triffic light count and stuff


ok go to were town and country mall is where the walk over over pass is keep on the down town streech of road (this is were the triffic light count starts)

turn ont eh 7th triffic light to the right go down the road tell you see play less gas staion turn right there and go down the rod for tiny bit and you shoudl see the place it will be right in front of you



what i mena abotu the triff light is cout the one you go trhou and turn on the 7th


there should be dairy geen wre you turn




there you go have nice trip he is an ok guy as well

Already english good you have learned! You are superstar number one student language.

91TII 06-03-2003 11:13 AM

yay, I got the first post on the new page. :D BAAAAAAAAAAAAAAAAAAAAAAAAAAAM!!!!!

NanaimoRx-7 06-03-2003 12:39 PM

Did you go to Vic today?

Nightwalker 06-03-2003 12:46 PM

Hey George, getting oil change today, going to fix the secondaries as well.

We're going to meet Tyler at work at 10:30 tonight. You wanna come?

:)

NanaimoRx-7 06-03-2003 12:50 PM

Quote:

Originally posted by 83GTI
.. Question to u rx7 Guru`s... Cold start flooding.. and its not the injectors.. Does it have a cold start injector under the intake manifold??
I'm assuming that this is for a second gen Rx-7, which I admitedly know less about (Stupid FI), are you sure it's not the injectors? The easiest way to get it going from flooded is to removed the fuse for the fuel pump and crank it over for ~10 seconds to clear it out then put the fuse back in and give'r. New plugs can also make a world of difference.

Here's a better description

http://www.rx-7.com/tech/unflood-fc.html

and just in case it's a GSL-SE

http://www.rx-7.com/tech/unflood-se.html

jeffraider 06-03-2003 01:17 PM

Quote:

Originally posted by BlackFC
Nice car man. :D Yeah was definatly not you then..hehe...obviously. :P Hope to see you around though soon, still have not seen your car around Nanaimo or anything although I rarely go there so meh.

later
-Justin

Totally! Let me know when you RX-7 guys are going cruising, and i'll try to make it out!

Nightwalker 06-03-2003 01:24 PM

Quote:

Originally posted by jeffraider
Totally! Let me know when you RX-7 guys are going cruising, and i'll try to make it out!
Like above, we're meeting tonight at 10:30 at Save-On Foods in Nanaimo to hang out, you should hang out. It's the one just north of where the north end of Bowen meets the highway that goes through town.

jeffraider 06-03-2003 01:57 PM

Cool! I might make it, but I did already make plans with the girlfriend, so we'll see how it goes.

NanaimoRx-7 06-03-2003 02:13 PM

We're meeting tonight? I thought that message on MSN was for a meet last night. Cool. I should be there. And Damn Coal that motor must be almost broken in by now, time for an oil change and some mechanical secondaires.

NanaimoRx-7 06-03-2003 02:17 PM

http://www.rx7club.com/forum/images/...withstupid.gif Man, miss reading one post and you go from 0 to Moron as fast as you can say:

Thank you for posting! You will now be taken to your post. If the administrator has selected to moderate all posts in this forum, you will be taken back to the forum and your post will be displayed presently. If you opted to post a poll, you will now be allowed to do so.

Geeeze.

Nightwalker 06-03-2003 05:12 PM

Haha, yeah, oil change already done, a bit late though because $$ :(

Well over 700km on it, it's almost completely broken in.

Time for secondaries and tightening up that Holley a bit!

Rx racer 06-03-2003 10:35 PM

Quote:

Originally posted by Coal
Haha, yeah, oil change already done, a bit late though because $$ :(

Well over 700km on it, it's almost completely broken in.

Time for secondaries and tightening up that Holley a bit!

I want to here about mad power out of it with the secondaries working.:D

Timpo 06-03-2003 11:00 PM

:) :D

white_FD3S 06-04-2003 12:47 AM

Quote:

Originally posted by bcty
someone wanna meet me down in vic in the afternoon around 12-1pm to guide me to Progressive? i have no idea where it is.. ED???
Sorry Tyler, I didn't read this post until now. I was downtown all day...you should have called me, I would have met up with you. I hope you made it to Progressive alright.

Nightwalker 06-04-2003 02:50 AM

Well, it's a lot better, and it pulls pretty hard at high rev, but it seems to be running suuppper rich right now, and the exhaust is too small so it's choking it. Could probably use new plugs and that e fan as well.

I'll try to tune the fuel out better tomorrow probably and get that e fan in asap. Might change the muffler to a straight through one that's sitting beside me for now to free up the exhaust a little.

It's coming along well, it's great to be able to rev it more freely too, well over 900km on the engine now.

NanaimoRx-7 06-04-2003 02:58 AM

Well my license is back up on the chopping block. Why don't I just give up and buy a civic?

NanaimoRx-7 06-04-2003 02:59 AM

FUCK

Timpo 06-04-2003 10:49 AM

Quote:

Originally posted by NanaimoRx-7
FUCK
???????????????????????????????????????

bcty 06-04-2003 11:01 AM

good night last night guys but me and george got the axe end of it.. i dont know what to say i think youll be ok though..
I havent gone to Progressive yet Ed.. it is next monday the 9th.. are you off mondays again? i could call you before I leave.. I have a few hours to walk around vic maybe we can hang out a bit??

Its gonna be hecktic for me on the 9th.. wake up goto licence place by 8 when they open hopfully.. go to insurance place right after.. then go home install the plates.. goto kaltire get them to finish balencing my rims and torque them down.. goto mazda at 10ish am.. oil change, plugs, set tps, and NEW WIPERS, get rid of the stock ones that came with the car :) then to vic for 12-1pm.. hopefully i can do it..

coal just fiddeling with the e-fan now and makeing sure everythings ok so far so good im off at 8:30 so just come down after that..

Tyler

Nightwalker 06-04-2003 01:35 PM

Quote:

coal just fiddeling with the e-fan now and makeing sure everythings ok so far so good im off at 8:30 so just come down after that..
Awesome man, the new muffler goes on at 3 o'clock, and I found some info on proper timing if George can come out with his timing light.

I'll be reading my Holley book some more and trying to get some tuning down as well.

91TII 06-04-2003 01:45 PM

Quote:

Originally posted by bcty
good night last night guys but me and george got the axe end of it.. i dont know what to say i think youll be ok though..
I havent gone to Progressive yet Ed.. it is next monday the 9th.. are you off mondays again? i could call you before I leave.. I have a few hours to walk around vic maybe we can hang out a bit??

Its gonna be hecktic for me on the 9th.. wake up goto licence place by 8 when they open hopfully.. go to insurance place right after.. then go home install the plates.. goto kaltire get them to finish balencing my rims and torque them down.. goto mazda at 10ish am.. oil change, plugs, set tps, and NEW WIPERS, get rid of the stock ones that came with the car :) then to vic for 12-1pm.. hopefully i can do it..

coal just fiddeling with the e-fan now and makeing sure everythings ok so far so good im off at 8:30 so just come down after that..

Tyler

Who wants to bet that the new wipers are the dual wipers with chrome on them??? C'mon....I bet $20! :D hahaha

Hey Coal, I got days off. :D Call me when you get off work tonight or I will talk to you on MSN I suppose. Bring the digi cam tonight and if we go cruising around I can be photographer. :D BAAAAAAAAAAAAAAAAM!!!

later
-Justin

91TII 06-04-2003 01:47 PM

wow, I'm on a roll. Thats 2 new posts on 2 new pages in a row! I am ultra pro hardcore! Guess its cause I TYPE MAD QWIK YO!!!!!!!

bcty 06-04-2003 01:50 PM

n3vAr!!

yeah are you jsut getting the muffler on or are they gonna do a cat back for you? remember 2.5" over axel and you can make true dual to there.. same size as headers.. mmmmmmmmm that will sound sweeeeeet!!

Nightwalker 06-04-2003 02:34 PM

I'm brookkeee ass poorrr right now, so just the muffler.

Should flow/sound a little nicer for now. Not sure if I'll head up right away, I'll talk to you in a bit Justin.

Timpo 06-04-2003 08:38 PM

Quote:

Originally posted by NanaimoRx-7
FUCK
??:) :D ;) :( ;) :p :o


All times are GMT -8. The time now is 12:00 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net