REVscene Automotive Forum

REVscene Automotive Forum (https://www.revscene.net/forums/)
-   Euro Tech Resources (https://www.revscene.net/forums/euro-tech-resources_318/)
-   -   BMW - post your ride! (https://www.revscene.net/forums/562410-bmw-post-your-ride.html)

roverT 08-12-2017 12:09 AM

Yeah, cold start is for the cats but the manual says to drive moderately right after starting so I don't get why we need it. It only lasts 30 seconds along with the loud secondary air pump blowing air through exhaust to move (atomize) rich fuel out through the cats. Cats don't like unburnt fuel in them as it prematurely wears them out.

That's why it's best to drive off immediately in a light manner, just baby the car until oil is at operating temperature then go crazy. All this cold start and SAP are really for the people who drive their car two blocks and turn it off.

M3E46Fanatic 08-12-2017 05:10 AM

1 Attachment(s)
Attachment 29156

AndroidAAA 08-12-2017 10:34 AM

M3E46Fanatic, a better way to upload your photos is make an account on a third party picture hosting website, I use imgur.com, upload your photos there and then post them using insert image and copy paste the url to the image.

roverT 08-12-2017 06:25 PM

https://uploads.tapatalk-cdn.com/201...cbe4108a60.jpg

BIC_BAWS 08-19-2017 11:56 AM

https://uploads.tapatalk-cdn.com/201...3a247760a9.jpg

Pfa. Anyone going to bc BMW tmr? Pre meet?

BIC_BAWS 08-20-2017 09:20 AM

Anyone here? I think I see westopherhttps://uploads.tapatalk-cdn.com/201...049337de83.jpg

Sent from my STV100-1 using Tapatalk

roverT 08-20-2017 09:22 AM

My car's booty is hanging in the air getting medical attention from a torn/ripped/cracked RACP. Subframe is laying on the ground awaiting bushings. Probably won't be done til end of week or next week!

BIC_BAWS 08-20-2017 02:11 PM

Not my ride, but since this is kind of our BMW main thread, here's some cars I took with a potato cam at the BC BMW meet. Met tons of great people like Westopher and other RS'ers (who didn't mention their tag)

Anyone know who owns the 1 series? I know he's on RS LOL
https://uploads.tapatalk-cdn.com/201...06a5cc5f6d.jpghttps://uploads.tapatalk-cdn.com/201...0eebaea90a.jpghttps://uploads.tapatalk-cdn.com/201...3814ef6309.jpghttps://uploads.tapatalk-cdn.com/201...bc0bee4d7f.jpg

Sent from my STV100-1 using Tapatalk

westopher 08-20-2017 02:38 PM

Nice meeting you today man, it was a solid turnout! So many well kept cars.

BIC_BAWS 08-25-2017 06:29 AM

Anyone got a spare bumper that they want to sell? Hit a really bad dip yesterday, and shocks being shot, the rebound is crap. I ended up tearing my entire bumper and lip off. FML

BIC_BAWS 08-25-2017 09:24 PM

What she looked like last week vs what she looked like this morning :/https://uploads.tapatalk-cdn.com/201...a0070aa747.jpghttps://uploads.tapatalk-cdn.com/201...63c5fd719e.jpghttps://uploads.tapatalk-cdn.com/201...c44c8092cb.jpghttps://uploads.tapatalk-cdn.com/201...9efca91d3a.jpg

Sent from my STV100-1 using Tapatalk

UnknownJinX 08-26-2017 12:11 PM

Quote:

Originally Posted by BIC_BAWS (Post 8858331)

Ouch.

What happened there?

AndroidAAA 08-27-2017 11:17 AM

Damn that's brutal.

chinese_driver 08-28-2017 01:12 AM

Quote:

Originally Posted by BIC_BAWS (Post 8858181)
Anyone got a spare bumper that they want to sell? Hit a really bad dip yesterday, and shocks being shot, the rebound is crap. I ended up tearing my entire bumper and lip off. FML

Mostly German auto recyclers in new west has a red mtech2 front bumper off a 05 zhp coupe when I was there last week.

BIC_BAWS 10-12-2017 11:29 PM

Vorshlag 02 330ci Daily Driven Track Car Thread

Pretty interesting read. It's very extensive, so prepare to put hours into reading this, but a very good read with good resources and pictures.

Interestingly, they found rubbing issues at 245mm all round and had to roll fenders/add hardmotorsport fender flares. The previous owner of my car had put on 265s in the rear, and its not rolled.

lowside67 10-13-2017 06:39 AM

The front is pretty much uniformly the tight spot on a square setup BMW - this is true from as far back as the E36 all the way through the E9X. Rears are no problem.

-Mark

BIC_BAWS 10-13-2017 08:29 AM

The shop in the thread actually found the front were easier to roll than the rear and their major rubbing issues when loading up the tires were from the rear.

I believe they ended up cutting both front and rear and placing flares. That being said, they are also running a 18x10 or 17x10 wheel

Sent from my Pixel XL using Tapatalk

lowside67 10-13-2017 12:35 PM

Yes - I did the same process with my E36 - cut the front and rear fenders, welded the rear unibody back into one, and custom steel flares on all four corners to fit 18x10s and 285 Hoosiers. It's easier to roll the fronts, but the fronts are much tighter overall - rolling is just part of the process.

-Mark

BIC_BAWS 10-13-2017 07:33 PM

anyone have a compression test kit i can borrow? I'd buy one from CT, but the reviews are pretty bad.

chinese_driver 10-14-2017 03:55 AM

im running 245/35 on 19x9 in the rear and it rubs when loaded up on turns. no one wanted to roll my fenders because it was such a bitch to cut out the urethane in the lip so i ended up rolling it without removing it. made just enough clearance, dont think i could fit 10" rears tho. looking for a 17 or 18" set up next summer. cant stand the ride of 19s.

BlkCat 03-16-2018 09:43 AM

3 Attachment(s)
My wife's '88 325 Super ETA

BlkCat 03-16-2018 09:53 AM

1 Attachment(s)
And my daily driver

bmcmking 03-20-2018 07:54 AM

My Daily

http://i1320.photobucket.com/albums/...psmwzfsflu.jpg

chinese_driver 03-27-2018 11:24 PM

current daily

https://i.imgur.com/4cxVgN0.jpg

BIC_BAWS 04-14-2018 07:33 PM

Who was looking for an e46 pfl shadow turn signals? Just gotta pay shipping

http://forum.e46fanatics.com/showthread.php?t=1227576

Sent from my Pixel XL using Tapatalk


All times are GMT -8. The time now is 10:58 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net