![]() |
^confirmed the old style dual coils work as i just put 1 in my aerotank mega |
http://scontent-a.cdninstagram.com/h...58174808_n.jpg Quick review of the aerotank mega. Solid 22mm device with upgraded duel coils, providing a fantastic vapor production from a stock factory wrapped coil Very effective air flow control, providing a coffee stir stick straw tightness, to a massive jumbo slurpee straw airyness. Removable drip tip for customization Overall recommendation? For an off the shelf clearomizer, a solid 8/10 |
hey guys, I started vaping about 6months ago and havent had a cigarette in about 4 months. been using the itazte vv and the nautilus, but I wanna get into some more advanced stuff like mods RDA's and such. what would you all recommend that I get to start me off right that wont do major amounts of damage to my wallet, and where I should go to get a hold of these and maybe a little bit of information. thanks in advance |
Quote:
I've been going down the block at vaporcity for cheaper coils $15 for 5 coils and the new upgrade coil does work with the aerotank and PT3 @mruppal be prepare to spend quiet a bit and get a clone if you wannna save some money on RDA! |
Quote:
|
waiting for my hawk sauce to get here. it better live up to the hype from you guys lol |
Quote:
to get a decent set up, that won't break the bank, and isn't a CLONE of a clone of a clone, you're going to want to look at a few brands. But don't get me wrong, there are some clones knocked off from authentics that are also REALLY nice, but you do want to see them in person to ensure that they are decent in quality. Smoktech makes a really decent mechanical, called the magneto. For an entry level 22mm wide mechanical mod, it has very good conductivity for firing resistances low, and has a solid switch which is magnetically opposed. It's a telescopic mod, allowing you to use all sizes of 18XXX series batteries. Another mechanical that's also a telscopic, is the Kamry K-101. It's a spring loaded bottom fire as well, has chrome plated brass contacts for good conductivity, and has low voltage drop for a good hit. The mod comes in a variety of body colors, where the tube that has holds the atomizer is a 19mm width. While it might not make much of a difference to you, to me and to some it creates a slight awkward look when you place 22mm atty's on top of it. For dripping atomizers, I'd stay away from MOST of the clones from fasttech. The quality that you'll find from their dripping atomizers are piss poor. The price you pay doesn't justify how crap they are. The post holes are usually smaller than small, and they might not even have the post holes line up properly. This would then give you a piss poor wrap on your coils, and it will then leave you frustrated. There are work arounds, but it's almost worth paying a little bit more and ordering a Youde device. Which is what I want to recommend. If you're looking for a solid dripping atomizer, I strongly suggest the Igo W3 and Igo W5. The w3 is a 19mm wide dripper, which suits the k101 nicely, has plenty of aftermarket top caps, from air flow controlled, to clear/frosted plastic ones, to solid stainless caps....really there are a LOT. It takes a mediocre affordable dripper and turns it into a solid worth while device. Where as the IgoW5, it's a little bit more in cost, but also has a lot of aftermarket support for top caps. I know there are other devices out there, and are pretty affordable, but all of what I've suggested to you can be found locally, and within town. CEV has the smoktech, the k101 and the igow3. ESV has a good selection of quality tobeco clones, and the Igo W5 with aftermarket top caps available If you're going to jump right into a mechanical with a dripper, expect to spend in the vicinity of 150 and up, just to get you started. That includes Mechanical mod, Dripping atomizer, 2 18650 high discharge batteries 2 Bay charger A little bit more can get you some resistance wire so you can learn the wrap techniques to allow you to customize your heat and vape experience more so. |
So my setup arrived from Vancity faster than I thought. (Next day!). I thought it was fucked out of the box because I tried to "traditionally" smoke with it and was getting little to no smoke. I find out that the tank needs to be vertically downwards for it to work properly. Looking forward to getting everything sorted out! |
Vangruver, why do you recommend the W3 and W5 over the W4? Just curious, since that's what I'm using. I just opened up the holes a bit. |
Quote:
|
I was able to get a nemesis clone by hcigar from Vape City and a Tobh V2 Atty |
inb4 i've over hyped the shit out of hawk sauce and no one likes it lels |
Quote:
Cant wait for dat hawk sauce w extra shot. |
Using the iTaste VV with an iclear 16B tank.http://winter.remobgaman.com/3.jpg |
Dual 12 wrap 24 gauge, split at 6, folded at 90 degrees or so. Meter's out to .5 ohms http://scontent-a.cdninstagram.com/h...12896989_n.jpg |
FML my aerotank mega glass tube broke. zomfg |
I know like three people who's got the nemesis clone in the last two weeks lol Thug juice to me just taste like hawk sauce but more menthol |
Quote:
You could just use the metal tank until you can find a website or store that carries a spare parts tank. |
i just picked a e-go t just a few days ago for starter kit, its pretty decent kit (i just over pay for it) i use to just use other ppls vaps & smoke as a group, 1st time owner is there anything i should watch out for |
|
Quote:
Quote:
|
Hey guys, my brother got me this Penske starter kit awhile back and I've really enjoyed peach flavour. I'm not getting as much smoke out of the vape as other people. Whats the secret? Should i upgrade the top part of the vape? Or should i just buy a new one? sorry, still kinda a vape noob Anywhere specific I should buy my vape products? |
My hawk sauce still not here. Tracking says it left LA on June 6th..why does it take forever :( |
anyone try or heard anything about Watta-Juice and Adics Burn juice ? any recommendations for what to get/try? ESV recently both their line of juices in. I tried the UBE HALAYA (taro) and SAGO'T GULAMAN (tapioca and jelly bits) from Adics Burn and both were pretty awesome. :thumbsup: |
Quote:
|
All times are GMT -8. The time now is 05:12 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net