[SaviorSelf_666]

no just saying i hate using my phone as a camera

[down_hill_dog]

Logan, Kosei k1's in silver with a mean offset and width

[foxy_DA9]

Put in new spark plugs and wires tonight...running alot better now! :)

[proshoraca]

put in a new cam, timing chain, and hyd. roller lifters this weekend, sweetness.

[girlcrazy_420]

Got the new lights installed today

http://i21.photobucket.com/albums/b252/Impulse_rs/Picture221.jpg

[down_hill_dog]

4mm smaller s/c pulley :)

[proshoraca]

chip and clutch adjust

[blue92eg]

well to day i removed the inserts in the front motor mount and filled it with 3M window weld and then re-inserted the inserts...ya for solid front mount now

while i was under the car i thought it would be a good time to install the Boral cat-back that ive have for the last 2 months sitting in a box....sounds good at idle havent baged on the car yet to see what it sounds at like wide open


and then next up in an exedy clutch thats suppost to get here on the 28th alll right haha no more slippage

[girlcrazy_420]

Got the 5.0 injectors put in this afternoon. Has alot more "pep" but I've still got some bugs somewhere in the electrical/fuel systems. I'll get a mechanic to look at it on wed.

[fourtirefire]

finally set the timing with a light on the car, wow i was probably off by about 8degrees where I had it at

[girlcrazy_420]

About changing the front/rear diff fluids... gotta change the fucking things again. They're very milky! ugh...

New wires, cap/rotor and EGR valve on the jeep. She runs like a top once again.

[saloman]

I just installed a Megan C-Pillar bar and Skunk 2 Racing shift knob and well wow, i actually noticed a difference with each mod


orderd a bunch more stuff from IIM Peter is the man!

[down_hill_dog]

yessssssssssss i love the hp gains from a skunk shift knob...

[jeffh]

main fuel relay for me. no more gay no start sometimes. i heart parts at cost.

[fourtirefire]

got my kitty cat removed today, and put another resonator in place of it. No more plugged up rotten egg smell, and no more feeling the floor heating up!

[girlcrazy_420]

Picked up a nice shiny oil catch can for the jeep! Also modified a new bosch alternator in place of a mud filled "thing" that didnt work.

[proshoraca]

modded about nine hundred and seventy three dead insects out of the air, by running the shaggin' wagon today for about 30 minutes.

[Kaiten]

put in a new starter today, bigger than stock so it was an ass to get in. car still has starting issues... It's probably the flywheel. pretty pissed.

[girlcrazy_420]

Grabbed another Alternator from PYP... Replacing the a/c pump with another alt to run 600watts worth of lights on the roof.

[down_hill_dog]

Originally posted by Kaiten
put in a new starter today, bigger than stock so it was an ass to get in. car still has starting issues... It's probably the flywheel. pretty pissed.

starting issues??? whats it doing dean?

[AzN_ignite]

lighten flywheel ring gear is a ND ND

[bmxkelowna]

weighed my black 17's
44.6lbs per corner so thats 178.4lbs for all four

weighed the stock 15's
30.2lbs per corner so thats 120.8lbs for all four

57.6lbs difference

[down_hill_dog]

not only is that 57 lbs, but thats 57 lbs of mass being rotated by the engine of your car... lighter is faster

[blue92eg]

well started on the clutch job on the car....almost the tranny out but the F'in Lower ball joint is lodged in there so i gotta think of somethin ot get those to come up...adn the axel nuts on the RSX arent 32" so ill have to get another size o well other then that its just hte tranny bolts and shes outta there

[jeffh]

^ not sure what your lower ball joints look like, but my honda mechanics have convinced me anything other than a properly placed cold chisel and a mallet is a waste of time (properly placed being in an area you can wedge it with good leverage but still be a safe distance from the balljoint itself) takes my favorite monkey 10 minutes to do an axle on my car

[AzN_ignite]

just give it one good hit with a big hammer, hit it with the nut on loose so you dont screw up the thread if you miss

[Tchleung]

Those pickle forks/chisels are a JOKE. I use an actual ball jonit remover. It wedges itself on the bototm of the ball joint threads/nut, while other legs go on the boot like any other, but instead of ramming it in and forcing it out with teh angled forks, you turn a bolt on the end which actually spreads the jaws of the device open. WAY nicer on boots. Takes 30 seconds with no effort required other then a ratchet.


Something like this
http://www.machinemart.co.uk/images/products/mid/MM040211222c.jpg
http://www.saab9000.com/procedures/suspension/images/steering/sttrackrod.jpg

[jeffh]

anything that pinches the boot that much is bad dice imo. i hope you keep alot of spare boots

[Tchleung]

If you look at the way it's made. it's rounded. it hardly pnches the boot. it forms around the boot and touches the actual joint inside the boot. from the bottom portion. The big difference is you don't have a wedge pounding squeezing the boot. This is a constant smooth pressure that leaves the boot perfect.

[down_hill_dog]

mod of the day... new bb, cranks, chainring, bashguard, chainguide, fork oil, and rear shock oil. wow i'm a happy boy :)

[blue92eg]

well thanks for the tips guys but after trying for about another 30mins i said f*ck it and jsut undid the LCA from the sub frame....because they where so hard to get off and they still arent off lol....but new clutch is in just gotta finish bolting up a few minor things here and there and add tranny fuild and shes good to go maybe it'll be broke in for ashcroft...u never know ahah so probably in 3hrs after work tomorrow since ive had enough today ill finish it up and start breakin it in.....RSX suck to work on they like to hide bolts under brakets and tones of wires not the must fun time but o well its back

[blue92eg]

i love workin on D series lol...tranny out and back in in 3hrs and 20mins....RSX gonna be goin on 8 hrs by the time its totally done

[girlcrazy_420]

Modded a new thermostat and overflow tank to the Jeep to solve overheating issues. It worked.

[blue92eg]

new tires Falkin zinei 512's today as well as an anlinment.....next up will be soild motor mounts for the engine...got the inserts now it just not enough

[nexREDLINE]

installed my greddy evo2 catback exhaust + y pipe, ordered the Top Secret front bumper/sides and seibon oem cf hood :D

[ColinK]

^ that for the g35 or the mercedes? pics?

[honduhman]

Originally posted by ckrieg
^ that for the g35 or the mercedes? pics?

Greddy exhaust, and top secret bumper on a ..... benz?

[RRxtar]

Lemforder (OEM) lower control arms, ball joints, LCA bushings and UCA (thrust arm) bushings. Brembo's all around. :cool:

hopefully it solves my wiggle.

[ColinK]

Originally posted by honduhman
Greddy exhaust, and top secret bumper on a ..... benz?

well...you never know! hahah...k, so it was a dumb question.. fuck off! :p hahaha

[girlcrazy_420]

Modded myself a bumbed out knee. Doc said I shouldnt be on it for 2-3 weeks... but I gotta fucking work.

[RRxtar]

Originally posted by Impulse_rs
Modded myself a bumbed out knee. Doc said I shouldnt be on it for 2-3 weeks... but I gotta fucking work.
you seriously suck at everything you do, eh?

[Tchleung]

Modded 18K drag suspension into the rear of the teg. Woo is it harsh hehe :D Waiting for the front coilvoers still.

[girlcrazy_420]

Originally posted by DA_TEG
you seriously suck at everything you do, eh?

I fucked it over a few years back in a dirtbiking accident and it hasnt been the same since. Its progresivly been getting worse. Something about damaged cartlage and the muscle on the back of the leg isnt working properly causing the muscle to just "stop working" when I've been standing too long. Not the greatest for long days at work...

[whitetalon]

were you on a dirtbike with a loose front tire? maybe you were trying to wheelie while you were drunk? it just seems like you are dumb and this is why bad things happen to you.

[BilletPimp]

Originally posted by G2Teggin
Modded 18K drag suspension into the rear of the teg. Woo is it harsh hehe :D Waiting for the front coilvoers still.

18K as in you spent eighteen thousand dollars on suspension?

[SaviorSelf_666]

18k and in spring rate

[BilletPimp]

haha w00t...thanks man :D

[saloman]

Modded a C-Pillar bar in and a Skunk 2 shift knob, with out a doubt it is my favorite noob LOL hahaha


Mod of the day, decided my car is a black hole for money and I refuse to sink more money into it! woo hoo 6 grand in ten yrs could be a lot more then it will be in a car, ahhh i am getting bored with cars!

[BilletPimp]

sanded/primered/painted all the surface rust before the Kamloops winters wreack havoc on it, not 100% perfect match, but it's a lot better than exposed rust :)

Also finally debadged the trunk...always wanted to do it with my old Fox, looks a million times better....pics in the random pics thread in off-topic

[Tchleung]

for 18G worth of rear suspension, it better be ballllller haha.

Modding new axle in tonight...

[Tchleung]

New axle installed.

[blue92eg]

tom u need to upgrade those things to stronger axles lol then you wont have to worry about anything breaking

[Tchleung]

This is the first axle in like 2 years lol.

[fourtirefire]

finally serviced my K&N filter on the car, that thing was plugged full of dirt!
and did some de-carbonization of my combustion chambers thanks to some steam cleaning.

[down_hill_dog]

dan, did the de-carbonization help at all? what i mean was it noticeable

[Slo40]

Wired up and turned on the two step feature in the microtech. Took out the useless rear seats, no real weight savings.

[SaviorSelf_666]

^^ what microtech

[Slo40]

I have a microtech LT10s running my SR20 ;)

[fourtirefire]

Originally posted by down_hill_dog
dan, did the de-carbonization help at all? what i mean was it noticeable
not really... it does tend to idle a bit smoother now, but it could probably use some more water injection treatment as the piston tops still have some crap on them

[Tchleung]

I take my statement back. my remaned Fneco axle almsot killed me tonight. Binds up and locks up udner heavy load and tries to pull me into the ditch........

[jeffh]

^ reman alxes are super gay sauce, i broke my driverside again doing a burnout, then the first replacement had a super vibration, so i had to buy lunch for my monkey twice to fix the dumb thing.

[Tchleung]

I put my old clicknig axle back in for now as it doesn't bind. Did it this morning at 6am in under 25 minutes on the ground :D

[Tchleung]

Mod of the day, got a wheel alignment

[Dirt Rider]

put some new plugs in the R6.. wow what a dif. it made. :) goign to ride the biek to a wedding today.. hello helm. hair :)

[Tchleung]

Just did 4wheel alignment. FL had 3/4" toe in haha. FR had 1/4" Toe out, and rears were also messed. every wheel pointing to the right. Took me a while to get onto the alignment lifts at work but we gotter...

[down_hill_dog]

-put in a set of BKR8EIX ngk iridium plugs, 3 heat ranges colder (suggested in my s/c kit)

-took out a bunch of antifreeze, put in a bottle of water wetter and topped it up with water. the previous owner thought it would be a GOOD idea to run antifreeze only, as it tested good to -52*c. Ouch on the cooling capabilities!

after this, it's already running better with less ping.

Edit* I also got Barb to rev up the car while I let the engine suck up water through the intake manifold. It's steamed and stuttered for a while, but after we went for a drive and cleaned it all out and then reset the ECU for codes... Wow it drives AWESOME now. I'm excited!!!! with a cooler thermostat the smaller pulley can safely go back on :)

[proshoraca]

3 ranges colder holy shit, i've heard 1range/50 hp increase by about 7 different engine builders, but if thats what the company says, must be right.

-modded a new non-blown out u-joint into the front of my driveshaft in the pits, as the existing one shit the bed across the finish line while racing Shaun in the 1/4 haha.

[girlcrazy_420]

Woulnt more coolant be better? I'm running 95% strait water... had a cooling leak but is now fixed.

My mod... 3 days of mud and abuse and now she's clean... half hour in the fucking car wash GGRRR

[down_hill_dog]

keep in mind in 01 Mazda decided to adopt vvt and 11.0:1 compression, add a supercharger and it's super hard to not produce ping.

adam, from what i've researched... More water than coolant cools better than more coolant than water!

[MURR]

Intercooler... Low air temps are key to making power.
Blowers make the same amount of heat as turbos. Its the compressing of air that adds heat, not the turbo itself.

[girlcrazy_420]

Originally posted by down_hill_dog
adam, from what i've researched... More water than coolant cools better than more coolant than water!

Thats what I researched also... but on www.howstuffwork.com it says differently

http://auto.howstuffworks.com/cooling-system3.htm

[proshoraca]

do a 60/40 split if your worried about it, even 70/30. most race type cars will do a 70/30 if freezing weather is not a problem, cause the ethelyne glycol(green "coolant") if overmixed will create poor cooling. i'd go 60/40. water/"coolant" just test it when it gets colder out with one of those hydrometers with the little arrow to point which temp. freezing will occur

[fourtirefire]

and if your really hardcore just run water and a bottle of watter wetter, then swap it out for coolant in the fall.

[Chandler]

flipped tires over on the wheels and rotated them. should wear a lot better now

[down_hill_dog]

nah it's already running 100% better danny. Almost time for the small pulley again... does anyone have a boost guage they wanna get rid of?

[whitetalon]

I have a boost gauge autometer also have oil pressure gauge both for 130

[SaviorSelf_666]

i have a Greddy boost gauge, mechanical, white face, missing bulbs tho, and harness for lights

[foxy_DA9]

Fixed the B&M tonight, figured out there was a bushing missing from one of the previous owners install. It used to clunk and rattle....now it feels amazing!

[ColinK]

^ where did you get the bushing?!?!

[foxy_DA9]

Originally posted by ckrieg
^ where did you get the bushing?!?!

When I bought the car from Ash, he had the box with the oem shifter in it...and so we found it still in the old one, and just took it from there!:) Creative I tell yah

[girlcrazy_420]

Got a 3" lift Kit ordered and have myself a new set of 31" BFG Mud terrains which'll be getting installed tomarrow morning :D MUAHAHA

[down_hill_dog]

Originally posted by ckrieg
^ where did you get the bushing?!?!

please tell me you did not install your B&M without this bushing.

[No mom, I'm not watching bukake movies again]

new turbos!! hooray!
http://i10.photobucket.com/albums/a129/osoausymemo/Newturbosforgtr007.jpg
http://i10.photobucket.com/albums/a129/osoausymemo/Newturbosforgtr005.jpg
http://i10.photobucket.com/albums/a129/osoausymemo/Newturbosforgtr004.jpg
http://i10.photobucket.com/albums/a129/osoausymemo/Newturbosforgtr003.jpg
http://i10.photobucket.com/albums/a129/osoausymemo/Newturbosforgtr002.jpg
http://i10.photobucket.com/albums/a129/osoausymemo/Newturbosforgtr001.jpg
Oh, and here is where some of my gauges are going... above the climate controls and radio...
http://i10.photobucket.com/albums/a129/osoausymemo/Newturbosforgtr010.jpg

[down_hill_dog]

Originally posted by RMS13
i have a Greddy boost gauge, mechanical, white face, missing bulbs tho, and harness for lights

Geby, it works good still? What would you want for it?? I'm basically just looking to find one that I can hook up occasionally or out of sight for tuning purposes.

[netfreak]

carb tuning.. blah. i probably just improved my gas mileage by 50% though heh

[fourtirefire]

cleaned out my leaking/ dirt filled fog lamp on the truck, and re-sealed it with some sillicone.
also lifted the front end a half inch or so, whatever adjustment i had left with the torsion bars.
as well as, fucked around with my pass side window to try to make it not jam up half way up, pretty much ripped the whole door and guts apart and still doesn't work any better after a few hours of frustration..

[jeffh]

^ what about your extended warranty?

[down_hill_dog]

yeah! is'nt that what it's for? newer vehicles should'nt have worn out windows.

[fourtirefire]

the problem was: that window had been smashed previously and replaced by some shitty glass shop, because the one slider assembly was half on the track and half jammed. It seems to work better today.

[girlcrazy_420]

Picked up a set (5) of 2001 TJ wheels and a larger diameter tire for the XJ. Lookin 'pimp' lol

[Slo40]

Danny, check the rubber in the rear window slider, fi the rubber is not in the right place it will jam up. In most G3's this rubber cushion is usually just sitting in the bottom of the door cause it falls out and causes that typical G3 window rattle.

[BilletPimp]

Originally posted by Impulse_rs
Picked up a set (5) of 2001 TJ wheels and a larger diameter tire for the XJ. Lookin 'pimp' lol

are those the 5 spokes? 16s or something?

[whitetalon]

silicone spray and cleaning the rubber on the window tracks helps alot as well and makes adjusting the window less frustrating!

[girlcrazy_420]

Originally posted by BilletPimp
are those the 5 spokes? 16s or something?

http://classifieds.castanet.net/data/37/large/PICT0044.JPG

They actually look pretty good on the jeep.

[BilletPimp]

looks good, man...kinda like the later model Cherokee rims...post pics w/ them on the truck :)

[fourtirefire]

Originally posted by Slo40
Danny, check the rubber in the rear window slider, fi the rubber is not in the right place it will jam up. In most G3's this rubber cushion is usually just sitting in the bottom of the door cause it falls out and causes that typical G3 window rattle.
shawn, this was the window in my truck, the car's windows are fine! lol
thanks though!
And the truck's window works alot better now too!

[girlcrazy_420]

Originally posted by BilletPimp
looks good, man...kinda like the later model Cherokee rims...post pics w/ them on the truck :)

I've got 2 sets of Cherokee Limited rims for sale. They're the gold edition... If you're at all interested, let me know and throw me a offer.

[BilletPimp]

I've got nothing those would fit ;) definitely not in the market for rims right now....just sold my Z rims w/ Falken rubber off my truck *sniff* most likely getting billets or chromies for it next year ;)

[blue92eg]

well today after work on the way home i heard a loud exhuast leak so haha took off the cat-back becuae it was leaking from somewhere...so im back to stock :( its so quiet now o well vtec sounds soo much louder hahaha

[down_hill_dog]

modded a bunch of sunlight detergent onto my s/c belt. no more slip at high rpm.... Time for a new belt.

[girlcrazy_420]

Got myself a trailer... Just in the midst of re-doing the interior... new paint, handles on the cupboards and lynolium. The exterior is going to be a grey... hope it turns out.

[Tchleung]

Dropped my gas tank tonight. Time to replace the dieing Walbro pump.

[Smoke Show]

Originally posted by G2Teggin
Dropped my gas tank tonight. Time to replace the dieing Walbro pump.

dieing walbro?!? how long did it last you, how many clicks, bad gas, dirty filter? usually they last a while.

[girlcrazy_420]

Spent the weekend camping up around Dee lake. Put a new clutch fan in and that seemed to have solved my overheating issues... didnt overheat once towing a trailer, with 3 people... Unfortunately one of the rear leafs packed itself in.

On a bright side, I have a parts jeep coming to my place any day now. 6.5" lift is going in pretty damn soon.

[bmxkelowna]

gave my car two black eyes a few days ago and gave them a nice polish today after autox

http://i60.photobucket.com/albums/h12/mfnbk/mine/subaru/000_2730G.jpg
http://i60.photobucket.com/albums/h12/mfnbk/mine/subaru/000_2732G.jpg
http://i60.photobucket.com/albums/h12/mfnbk/mine/subaru/000_2736G.jpg
http://i60.photobucket.com/albums/h12/mfnbk/mine/subaru/000_2738G.jpg
http://i60.photobucket.com/albums/h12/mfnbk/mine/subaru/000_2739G.jpg

[down_hill_dog]

Originally posted by Impulse_rs
Spent the weekend camping up around Dee lake. Put a new clutch fan in and that seemed to have solved my overheating issues...

I hope you and josh did'nt push it to dee lake, because i saw you on the side of 97 pushing it down the highway...

[girlcrazy_420]

Originally posted by down_hill_dog
I hope you and josh did'nt push it to dee lake, because i saw you on the side of 97 pushing it down the highway...

Possibly :rolleyes:

The gas light came on so I thought i'd be able to make it into the winfield gas depot for some cheapo marked gas before heading up to dee and doing a few days of trails from there. Ran out of fresh water and beer... Cooler caught fire last night... ...fucking drunks... :flamemad:

[bmwwheelman]

lmao how do you set a cooler on fire... wait, its you, you defeat the impossible! lol

Bmxkelowna (sorry I dont know your name)
I love that shot of the Legacy rear.. looks sweet, love the 4 door! :D

[bmxkelowna]

thanks man! :)
i wish i had a good camera, photography would be some thing i would like to get into
oh ya, the names logan

[down_hill_dog]

hair flowing mania!!!!!!! yessssssssssssss raceeee kaaaaaaaaaa driverrrrr

[bmxkelowna]

haha i saw you, barb and fourtirefire (forgot your name sorry) all parked infront of boyids tonight so i figured you guys would be out on the town

[jeffh]

eff. my birthday, out at baitong, barb gaveme a ride so ic odculd get drunk

[bmxkelowna]

happy birthday man!

[351rusty]

my mod of the day... exhaust fell off my truck and i have no intention of fixing it right now

[BilletPimp]

Logan: looks great! definitely diggin' the h/lights

I put 1 blue H4 headlight in my car (not just the bulb...entire light hahaha) that I found in my buddy's basement...better than 2 sealed beams...will post pics...she looks funny. Angry pirate YARRRR

Also...there was a funny noise coming from the car the whole time I"ve owned it...everyone said it's exhaust, so I didn't give it too much thought....but always had a feeling that it's a loose brake caliper. So I ripped the wheel off over the weekend and sure enough...the caliper was held there by god's good grace...neither one of the mounting bolts were even TOUCHING the spindle...it was hot. Good to know this AFTER I've made several 185 km/h runs lol

[Tchleung]

Rewired the walrbro pump. man it's so much louder now taht it's getting full votlage. Nosie doesn't change as I hit the turn signals anymore sicne no voltage dorp. it's awesome

[fourtirefire]

Originally posted by G2Teggin
Rewired the walrbro pump. man it's so much louder now taht it's getting full votlage. Nosie doesn't change as I hit the turn signals anymore sicne no voltage dorp. it's awesome
what gauge wire did you use?

it makes a huge difference once you rewire it.. good mod!

[SaviorSelf_666]

http://i19.photobucket.com/albums/b189/gurbaj/3569ad6c.jpg
Battery Relocated, Re-wired Alternator, ps, etc (frayed or burnt wires), Greddy Underdrive Pullies, Airpump Removed.

Next is removal of the jdm twins.

[Tchleung]

Originally posted by fourtirefire
what gauge wire did you use?


Yeah I can't believe how much louder the pump is and how smooth it sounds now. I used 8 guage

[bentforks]

new catback exhaust w/magnaflow
and.. :) HID conversion kit with Hi/Lo :)

AL!

[HyperREV]

my ecsta mx's went on today, holy shit what an amazing tire.

[Big Daddy]

Painted my steelies gloss black and polished my hubcaps to a nice shine :D.

[down_hill_dog]

Originally posted by HyperREV
my ecsta mx's went on today, holy shit what an amazing tire.

if you think those are good, imagine an Azenis rt615, Hankook RS2 or an Advan Neova. All of which guys we race with run on, and all say kill the mx hands down! Try pricing out a neova in your size though :O yikes

I just wish someone would make a sticky, wide, lowprofile 15" tire!

[RRxtar]

Originally posted by down_hill_dog
Try pricing out a neova in your size though :O yikes

$459.95 for one of my rear tires from Tiretrends

[fourtirefire]

Originally posted by DA_TEG
$459.95 for one of my rear tires from Tiretrends
yikes..
I don't feel so bad pricing out truck tires at 225/each for some geolander mt's then...

[HyperREV]

Originally posted by down_hill_dog
if you think those are good, imagine an Azenis rt615, Hankook RS2 or an Advan Neova. All of which guys we race with run on, and all say kill the mx hands down! Try pricing out a neova in your size though :O yikes

I just wish someone would make a sticky, wide, lowprofile 15" tire!


heh i killed a near new set of $400 a tire pirelli's in around half a season, the marginal increase in dry grip the azenis would offer for the increased cost and decreased tread life isnt worth it.

to say they "kill" the MX is bs IMO. nowhere but here have i ever heard that. i dont auto-x so i dont care about how well they do in a slalom race. of course the advan neova is an amazing and unmatched tire, but at the rate i go thru rubber im not about to spend more than twice as much for something that i'll be done with just as quickly.


$150 a tire for my brand new MX's for the motherfucking win, NOTHING will come anywhere near these tires for that money.

[Slo40]

mounted 26x8.5" ET Drags on stock rims.

[Shane(showtime)]

Originally posted by HyperREV
my ecsta mx's went on today, holy shit what an amazing tire.

Agreed when I was at Packwood SCCA solo2 event all the fast street tire guy's are running this tire. Beilive it or not the Mc Cormicks in there National winning civic ran the SPT's on the second day. And put down some amazing times thats a shaved street tire also. The MX needs more support.

[the_anti_rice]

Took cover off of my F4i and changed front and rear sprockets then put on new chain (520 conversion). Went down one on the front sprocket. Then proceeded to go up on one down the street :).

[No mom, I'm not watching bukake movies again]

Matched my Dash lights to my autometer cobalt gauges...
Before:
http://i10.photobucket.com/albums/a129/osoausymemo/Dashbefore.jpg
http://i10.photobucket.com/albums/a129/osoausymemo/dashbefore2.jpg

After:

http://i10.photobucket.com/albums/a129/osoausymemo/dashafter2.jpg
http://i10.photobucket.com/albums/a129/osoausymemo/dashafter.jpg

I like it... looks friggin' sweet in the dark... cant wait for the rest of my gauges to come in.

[proshoraca]

Originally posted by Slo40
mounted 26x8.5" ET Drags on stock rims.



sweet, time for some 12's for sure for you:)

[zul8r]

Finally installed camber kit. What a pain in the ass that was, had remove rear a-arms, undo rear sway bar and enlarge the a-arm ears. Snapped a sway bar bolt in the process of everything, off to Lordco for me tommorow.

[down_hill_dog]

Originally posted by HyperREV
$150 a tire for my brand new MX's for the motherfucking win, NOTHING will come anywhere near these tires for that money.

no matter how good your tires are, that price is REALLY hard to beat.

[down_hill_dog]

boost guage went into the Miata tonight. thanks logan!

[bmxkelowna]

boo! no pics haha. works good?

[girlcrazy_420]

Installed a High Amp Alternator, new polly belt, and 4 new 100watt lights on the roof. Quite a bit brighter now! Gonna be installing the new engine mounts in the morning... cant wait :rolleyes:

[bmxkelowna]

heres a good mod of the day...

i got me a 5speed legacy! WOO!

[down_hill_dog]

Originally posted by bmxkelowna
heres a good mod of the day...

i got me a 5speed legacy! WOO!

wow dude!!!! non turbo though? all that mumbo-jumbo 5 speed stuff is coming sooner than we think! i can't wait :D

[Tchleung]

Converted the G2 to OBD1

[bmxkelowna]

started the 5speed swap yesterday around 11am and finished around 630ish

the car is so much different with a 5speed i love it

[ColinK]

Originally posted by bmxkelowna
started the 5speed swap yesterday around 11am and finished around 630ish

the car is so much different with a 5speed i love it you end up doing it at subaru? How did it go? Anthony was telling me you were gonna do it...

[bmxkelowna]

nope i ended up doing it at ivans in lumby

[Dirt Rider]

modded a brand new quad into the stable.. 06 honda 500

[down_hill_dog]

Originally posted by bmxkelowna
nope i ended up doing it at ivans in lumby

Nice man, i can't wait to see it.. I bet it's alot quicker now too eh ?

[bmxkelowna]

soooooo much better!
:D im like a little kid on christmas day

[fourtirefire]

mod of yesterday.. took out the zeal dampers, rear swaybar, wheels from the car, put the H&R race springs and stock struts back in with GSR wheels.
Now I can actually get into my own driveway without scraping something!

Throwing in an electric trailer brake controller into the truck tonight or sometime soon too..

[proshoraca]

mod of the day, noticed that my transmission is split, bellhousing has a 1/4" thick split all the way down drivers side, fractured case all teh way back. passenger side of bellhousing very fractured all the way around, not sure how it is still in my car actually, pretty fubar'd. shit. haha, pretty kickass though. will get some good pics goin.

[RRxtar]

oil change #4 on the RR @ a hair over 7000kms. went to Motul 5100 synthetic now and still Honda filters.


yes, 7000kms is about 4000 short of where i wanted to be at this point. :(

[fourtirefire]

new inner tie rod ends on the truck, wow were the old ones worn out!

Hopefully that'll solve my irregular tire wearing situation.

[girlcrazy_420]

Put a new gas tank in the cherokee today.

[hk20000]

installed STi front foglight covers and front splitter onto my 04 TS wagon a few days ago. Looks like this now:
http://www.imagestation.com/picture/sraid215/p4e649a0205e7c73f87eb60730009f6a6/ece6af74.jpg
STi skirts are in the mail :D

[fourtirefire]

installed the trailer brake controller in the truck tonight,
Oh and threw in an optima red top too, the old shitty napa battery that it came with was reading something like 11.8 volts static, although still starting up every time, I don't trust it.

[No mom, I'm not watching bukake movies again]

cobalt boost gauge in... all gauges in... time to figure out the Nismo 4 point harness... Smoke Show sayz he'll have turbos done by next week(yeah right!!!) and then lastly the 720cc injectors.

[girlcrazy_420]

Sold the Impulse last night, and brought myself home a new toy.

[Tchleung]

My GSR had the driver side mirror de-modded from the car last night while I was asleep by someone.... Fucken pieces of shit.

[down_hill_dog]

could'nt find a better place for this.

http://www.globalnetspace.com/miata.html

wow :eek2:

[Tchleung]

Gotta say, I am not a huge fan of Miatas but damn that's sweet!! :D

[down_hill_dog]

my mod of today, cut one of the rear dead coils off the KGMM springs to level out the cars stance. looks much better.

[fourtirefire]

modded no more car, tried to fit the sub box in the truck, but that'll have to be a custom sized box to fit properly...

[Chandler]

my horn, cigarette lighter, interior light and radio are all not working. I checked the fuse (and replaced it) and its good to go. theres power at the fuse block but something is fucked after that. I remember my old blazer having this problem so im worried.

any ideas?
i've been too busy all week to look into it and driving to work with no tunes is just crazy.

[down_hill_dog]

wow these old chevs sound like wiring nightmares. is'nt that why the last one burnt down?

[Chandler]

woo figured it out... just checked a different fuse marked horn/ins. glad that was easy.

I think my 91 S10 was caused from some other source of heat, since the transmission was slipping before i pulled over to see what the fuck was going on.
but ya my 89 Blazer was a wiring nightmare. i remember at one point when i pressed my horn the interior light would go on, and then one day it just buffed out and everything worked fine.

[fourtirefire]

mod of yesterday.. added some bump into the truck, without sacrificing any seating space!

[Dirt Rider]

modded some fancy pantsy heated grips onto the quad today.. SOOOO sweet.. cold weather/ snow riding here i come :)

[down_hill_dog]

today a stainless 2.37" RacingBeat midpipe went onto the Miata. little more tone, little more power, little less cat and resonators :)

edit* pulley also got a little smaller. i'm praying for less ping, because with this pulley shes FAST

[Tchleung]

Kinda late tho, but mod of, last month? :P

-Water/methanol injection and 30psi of boost

[ColinK]

^ wow!!! your crazy! :p

[Big Daddy]

Modded my Bike into my buddy's heated garage (inside it, not into the side of it, thank you). I have my Yoshimura RS-3 exhaust sitting next to me right now, gonna clean it up a bit then bolt it back on.

[girlcrazy_420]

Ghetto Teardown and build up of the YZ. Lots of dirty/broken parts in there... EEK

[Slo40]

Originally posted by Big Daddy
Modded my Bike into my buddy's heated garage (inside it, not into the side of it, thank you). I have my Yoshimura RS-3 exhaust sitting next to me right now, gonna clean it up a bit then bolt it back on.

Nice! I have the Yosh RS-3 too sounds nice.

[girlcrazy_420]

Got er back together. Honed out the cylinder, new rings, all new top eng gasgets/o-rings, spark plug, coil pack and spark plug wire, used proper nylon nuts and locktight on all the nuts/bolts, re-jetted/fine tuned the carb, replaced the powervalve and through a new tube in the rear tire. Only ghetto-ness here is the Piston wasnt replaced...

[AzN_ignite]

JDM ITR cluster with yellow needles FTW, some modding, and transplanting to get everything to work, and its only a few thousand km diff then my usdm cluster woot woot

[SaviorSelf_666]

Originally posted by AzN_ignite
JDM ITR cluster with yellow needles FTW, some modding, and transplanting to get everything to work, and its only a few thousand km diff then my usdm cluster woot woot

I can change the km's on that for you :D

[No mom, I'm not watching bukake movies again]

Turbos are in car starts up and purrs beautifully... no downpipe lol... trying to find some steel braided lines for the oil/water feed 'cause the stock ones suxors for teh lose!

[jeffh]

new hawk hp+'s and rotors in the front of the DC, car actually stops now.
its getting stainless lines and new brake fluid tuesday

[Kyran]

Whell my mod for the day was putting my chipped ecu in my civic and with the help of shane, i got my vtec working and put an alrite tune on it.

[ColinK]

^ what kind of car/motor do you have?

[jeffh]

^ orange first gen civic with white wheels and a mugen wing. and a d16 of some sort under the hood.

[ColinK]

hmm...never seen it! Sounds cool!

[bmxkelowna]

http://i60.photobucket.com/albums/h12/mfnbk/other/img5102cv5.jpg

its pretty pimp

[ColinK]

oh that's it? I saw that pic in automotive shots...cool looking car!! :)

[Slo40]

that car is hot sex!

[Kyran]

Thanks guys, I just started posting on rev scene, glad you like the car. Im supercharging it this winter so it should go pretty good.

[the_anti_rice]

Turbo dawggggg!

http://img214.imageshack.us/img214/2456/civic1mp5.jpg

[ColinK]

^ did you buy that from a guy in kamloops? trade him a bike??

[jeffh]

new wheels. woot, ill get pics after i get a real polish onthe new car

[bmxkelowna]

modded driving my old mustang again :(
the legacy is broken (steering knuckle hub thing)

so im stuck driving my old 2.3L 5speed mustang that i sold to my dad till i get the legacy fixed

but i do know why i always see craig sideways :D

[proshoraca]

kyb's all around, and allignment this afternoon.

holy shit, LF strut totally seized, no kidding felt like driving a wooden wagon this thing was.

[fourtirefire]

LOF service done today, I hate having to get it done at a shop to keep my warranty valid. $$$

[Tchleung]

Parked the G2 for winter yesterday. Gonna start work on pulling the motor out tonight for a new build

[SaviorSelf_666]

http://i19.photobucket.com/albums/b189/gurbaj/IMG_1348-1.jpg


^^ Got some ultra Rare RE Feed Side Skirts exactly like these.

[Saturn2nr]

^^^ that is a sexy car.... i wish i had a 3rd gen.
stuck rollin in the fc for at bit... summer will bring change though

[SpooSports]

oil pan gasket went in

[Tchleung]

Pulled the motor out today. Pulling tranny off tomrorow and maybe the head.

[No mom, I'm not watching bukake movies again]

^^^^^ Love teh license plate on the mazda.... took the liner for a rip with the new turbos... car went sideways in 2nd gear... blew off a vacuum hose somewher so ordering all new ones...

[ColinK]

^ what kinda turbos you put in?

[Tchleung]

Stripped motor down today to diagnose a problem, find two peices of #3 piston pissing by the valve reliefs. Oopsy. Oh well. 12.02 @ 127mph on 3 cylinders is still pretty good.... lmao

[SpooSports]

Rear Main Seal on friday. Truck officially doesnt leak a drop of ANYTHING now:)

[Chandler]

modded a 03 polaris sportsman 700 twin in the back of the S10. she was just canned but i still held 5th gear goin up bridge hill. i need to get a add-a-leaf system for the truck now.

[Chandler]

oh just modded my quad through my back window of my truck :)

[girlcrazy_420]

Modded a taurus into the driveway. ICK... fuckin fords. Good ole winter beater.

[down_hill_dog]

Originally posted by Chandler
modded a 03 polaris sportsman 700 twin in the back of the S10. she was just canned but i still held 5th gear goin up bridge hill. i need to get a add-a-leaf system for the truck now.

Christine was telling us at work that your got one and wanted to go riding with her. 700 twin is a big bike dude!

On a side note, air helper springs can be had for pretty cheap nowadays, and when the air is deflated your ride is not compromised!

[Chandler]

Originally posted by down_hill_dog
Christine was telling us at work that your got one and wanted to go riding with her. 700 twin is a big bike dude!

On a side note, air helper springs can be had for pretty cheap nowadays, and when the air is deflated your ride is not compromised!

hahaha christine is a wild girl!
yeah id perfer airbags but its such a huge machine for my little truck i think im going to look into a utility trailer.

oh and i got a new rear sliding window for $75 installed!

[Slo40]

modded my car loan to zero today - YAY!!

[Big Daddy]

Modded a '76 Power wagon into my possesion :D

[girlcrazy_420]

Originally posted by Big Daddy
Modded a '76 Power wagon into my possesion :D

Not a brownish orange with a cb under the dash by any chance is it?

[girlcrazy_420]

Modded a 93' Cavalier into my possesion this evening. About time I picked up another 5sp vehicle... These automatics are really getting on my nervs ;) Now hmm... which vehicles to sell/keep?

[proshoraca]

picked up some tires, hooked up vacuum modulator valve, hooked up tach, hooked up oil. press. gauge, fixed swamper's leak, fixed window so its not stuck 3/4 the way up, fixed pitman arm, fixed tranny line leak, on truck.

[Chandler]

Originally posted by proshoraca
picked up some tires, hooked up vacuum modulator valve, hooked up tach, hooked up oil. press. gauge, fixed swamper's leak, fixed window so its not stuck 3/4 the way up, fixed pitman arm, fixed tranny line leak, on truck.

whoa hold on here..38.5's on a S10? you need to post pics. solid axle swap i assume?

[SpooSports]

Originally posted by Chandler
whoa hold on here..38.5's on a S10? you need to post pics. solid axle swap i assume?


Pics

[Dirt Rider]

Originally posted by SpooSports
Pics


3rd that

[proshoraca]

muahaha.

I have to get some decent pics. current ones don't really do the justice on the size thing very well.. will do so on saturday before swampers come off i think.

[351rusty]

ill have those pics from Van uploaded sooon... and your not takin those tires off yet bastard...we havent even gone 4xin and there isnt any snow
i swapped over the whole cab and wiring harness on my truck
got a 6 inch BDS lift awaiting install
new rims
35 x 12.5 Pro Comp Xterrains should be here the 23rd

[honduhman]

I know a guy with 38.5s in winfield on his s10.

Makes the truck look like a monster truck from a distance..... up close it makes the truck itself look tiny.

[Big Daddy]

New Exhaust, and Hood pins are done...

Next is steering components...

[down_hill_dog]

Last night I put in PIAA LED 194 licsence plate bulbs. They look much better than my burnt out/orangey ones!

Day off today, I was finally able to get in and do and much needed complete clean-up of the interior of my car. I know it's a tiny little car, but with the weather and having no garage I did'nt have anywhere to clean it.

Also put in super heavy rubber floor mats for winter today, dropped the freeze point on my antifreeze and topped up the w/washer reservoir. Hopefully new tires should be on by end of the day :)

[down_hill_dog]

195 55 15" pirelli winters went on Today. Finally a tire that fits and dosent rub too bad. yikes theyre pricey though :(

[proshoraca]

modded a new tranny shift pattern into my truck the other nite. it goes something like this:

Park
Reverse
Neutral
Neutral
Neutral
and... you guessed it... Neutral.

un-beneficial.

[Jr.'s_G2]

mood of a couple days ago

built a down pipe for a GTI-R
3" 304 ss

http://i49.photobucket.com/albums/f299/project504/NissanExhaust003.jpg
http://i49.photobucket.com/albums/f299/project504/NissanExhaust002.jpg
http://i49.photobucket.com/albums/f299/project504/NissanExhaust006.jpg
http://i49.photobucket.com/albums/f299/project504/NissanExhaust005.jpg

[Slo40]

^^ that is some beautiful work as usual Justin.

[down_hill_dog]

NICE! for rich's car?

[jeffh]

beauty work justin.

my mods of the last week were
new ceiling fan with light (it even came with a remote)
new hall light fixtures
and new bathroom light and towel fixtures

house mods ftw!

[girlcrazy_420]

Did a hot oil flush, followed by a drain and fill twice. I've got a engine full of nice clean looking Mobil-1 synthetic 10w30. Also supporting the black steelies with a new set of all-seasons. Put in some Silverstar headlamps, lordco's high end wiper blades, WAI with a ractive cone filter and cleaned up and put a new gasket on the valve cover followed by a complete grease job... haha (only 2 upper ball joints)

Guess its time for window tint and the z24 body kit?

[saloman]

Originally posted by the_anti_rice
Turbo dawggggg!

http://img214.imageshack.us/img214/2456/civic1mp5.jpg


Yes Colin and Geby that is Craig's Old car hahaha That car hauled ass last time I was in it, it took my car in a FULLY LEGAL RACE
I love your old CBR 600f4i, such a nice bike!!!

I hear you managed to get that civic to beat a 13sec car, this true?

[the_anti_rice]

12.88 actually ;). It's true fast now. Runs great. For sale in the spring or now if someone wants it... I will be buying a 1000rr so this thing will have to go. Seems to be reliable I haven't had any problems and did I mention it goes like hot damn...

F4I looks better up on one... Maybe next year Craig!

[saloman]

Originally posted by the_anti_rice
12.88 actually ;). It's true fast now. Runs great. For sale in the spring or now if someone wants it... I will be buying a 1000rr so this thing will have to go. Seems to be reliable I haven't had any problems and did I mention it goes like hot damn...

F4I looks better up on one... Maybe next year Craig!

With how Craig gets tickets and shit hahaha he wont have a license
WTF that car ran a 12.88!!!! I call B/S it is a good car but hahaha WTF??? does it still have a dent in the fender from where a lil fack kicked it? hahaha ohhhh good memories haha

[blue92eg]

Originally posted by saloman
WTF that car ran a 12.88!!!! I call B/S it is a good car but hahaha WTF???

well since the car has been tommy tuned its makes it that much faster....and hte car does rip i can speak for that....

[Slo40]

You got a timeslip for that 12.88 Kyle?

[the_anti_rice]

12.88 from a roll bee... ;)

[saloman]

ya actually that makes sense, the car had the potential parts wise but needed a good tune. you upgrade anything on it yet? seriously tho wow I am impressed it ran a 12.88 hahaha i guress Criag did built it right hahaha
that car with that sustec C5 head he had for it would be a lil' monster!

[ColinK]

Originally posted by the_anti_rice
12.88 from a roll bee... ;)

how do you measure 1/4 mile from a roll? I've never heard of or seen that before....

[jeffh]

he means to say that in a street race he was faster than a car that ran 12.88.
so in reality its prolly still a 13.5 or so car, because fwd cant launch

[Dirt Rider]

modded my pickup out of my ownership.. :)

something new in the spring time me thinks.. we'll see

[2_tha_max]

customized the winter rims with tires onto the lancer today, way too much work...had to grind out the middle where the center cap goes to fit them on

[methodicreign]

today i took out the votex and silencer out of my airbox and cut out the back side of it and routed in some piping for a more direct roue than behind the passenger headlight, sounds better and i spool faster and get a full pound extra boost. for free it was great

[Slo40]

Originally posted by jeffh
he means to say that in a street race he was faster than a car that ran 12.88.
so in reality its prolly still a 13.5 or so car, because fwd cant launch

Amen brotha!


Found this little gem a while back... jeje

http://img.photobucket.com/albums/v474/autoxer/FWD.jpg



Also modded winter tires back onto the 240.

[FishTaco]

modded this to my collection....anyone have suspension,rims,and and intake for a 94 acord?

http://img.photobucket.com/albums/v639/jposse187/IMG_1532.jpg

[SaviorSelf_666]

Removed A/C, Added Poly Urethane Solid Motor Mounts, Greddy Oil Catch Can, Removed Exhaust System and Turbo's, Added KG Parts Differential Brace, Mazda Speed Power Plant Frame.

To Go On:
Bought Ebay Turbo Manifold ($100 haha), 44mm Tial Wastegate, Tial Bov, KG Parts Fuel Kit w/ 850cc Primaries and 1000cc Secondary Injectors.

[AzN_ignite]

hey dont knock Ebay, Ebay FTW

[SaviorSelf_666]

Yeah that Ebay Manifold by SSAutoChrome can support 500+hp with some mods.

Not knocking ebay..ebay is "like jdm" heaven

[bmxkelowna]

SSAutoChrome makes some good shit
a lot of the wrx/sti guys use there fmic kits and have a lot of success

[Tchleung]

Too bad all their manifolds crack and fall apart. lol. Although they are SLWOLY getting better. I'm in the middle of putting one of their manifolds on a customers car(by choice).

But for the price, their IC and IC piping is definantly a good buy.. their FMIC are direct Precision knockoffs. their "swirl" turbo manifold is also a ONE-FAB manifold knockoff. all their bovs/wastegates are knockoffs. it's crazy! lmao

[the_anti_rice]

Originally posted by bmxkelowna
SSAutoChrome makes some good shit
a lot of the wrx/sti guys use there fmic kits and have a lot of success

I put a full SS 3" kit on a wrx and it worked great. Sounded awesome. Good quality piece.

[the_anti_rice]

http://img292.imageshack.us/img292/1668/dirtytruck003yk3.jpg
http://img182.imageshack.us/img182/6040/dirtytruck002na8.jpg

Hit some mudd after the gf pwned a riced out g2 from a stoplight. God damn that must be embarrassing getting beat by a truck.

[RRxtar]

pretty sure wrong thread


but. he probably thought "that thing got a hemi." so he expected you to win

[the_anti_rice]

hahahahahaha

Actually I was showing off my new chrome handles and magnaflow pipes! (Mod of the day.....)

[fourtirefire]

picked up some pretty meaty looking 32" off road tires for the truck yesterday. All I can say is that once I put them on they'll howl!

[SpooSports]

what type of tires danno?

[351rusty]

Originally posted by fourtirefire
picked up some pretty meaty looking 32" off road tires for the truck yesterday. All I can say is that once I put them on they'll howl!


ya whatd ya get?... mine still arent here... should be tomorrow

[saloman]

Originally posted by the_anti_rice
Hit some mudd after the gf pwned a riced out g2 from a stoplight. God damn that must be embarrassing getting beat by a truck.

I think you are Craig are trying to be eachother hahaha same truck and you both own each others old car or bike LOL

Modded my car into winter storage, goes to bodyshop in the spring now :(