that video should be in the nsfw thread :sweetjesus:

Lol I saw that when you tweeted the store

You could've just gone to the event, european. Sign-ups were just for first dibs on loaners.

but what will you take to photowalks?!

Maybe i'll get a 800mm F5.6 by then! haha.. speaking of which. Let's have another photowalk! I'm sure there is some new faces since 2010!

In!

What's everyones mirrorless kits look like?

I'm about to order a 23mm f/1.4 and planning on also getting a 56mm f/1.2 in the future. Going to hold off on the X-T1 like Hehe suggested and possibly wait out the X-T2.

Also, I'll probably be trying to sell my 6D soon but unfortunately i've super glued the mode dial stuck on M when it came off... How much do you guys think I could get for it? Everything else is in great condition.

edit: ended up ordering this bundle: http://www.amazon.com/Fujifilm-Filte.../dp/B00FY3YLYY lots of random stuff but same price as the lens with out it.

Also about to trade my X-E1 + Fuji 27mm + some cash for an X-T1.

Picked up my first digital rangefinder today.. The first digital rangefinder. Lol
http://i.imgur.com/aK7ToCC.jpg

Cant test it yet because the Lithium batteries have to be shipped separately.

Mirrorless kit: X-T2 + 16 + 35 + 56

EDIT: just saw that was an old ass post

Bump from the dead!
I 3D printed a grip for my R-D1s because the official one was so bloody expensive.
https://farm5.staticflickr.com/4336/...e72678ca_b.jpgR-D1s with 3d Printed grip and hood! by Richard Tran, on Flickr

Looks amazing!

Did you do your own design? Or was it downloaded from somewhere? Also, how much did it cost to have it printed?

I am looking for a grip for my A7II, went through different options but didn't find anything I'm completely satisfied.

My new toy:

https://farm5.staticflickr.com/4333/...2ae11e71_c.jpg

https://farm5.staticflickr.com/4370/...ef65c4d7_c.jpg

Test:
@F1.4
https://farm5.staticflickr.com/4431/...629729be_c.jpg

https://farm5.staticflickr.com/4376/...909c8bef_c.jpg

F2:
https://farm5.staticflickr.com/4334/...363b8795_c.jpg

F2.8:
https://farm5.staticflickr.com/4368/...22cc0880_c.jpg

F4:
https://farm5.staticflickr.com/4416/...069b30f2_c.jpg

F5.6:
https://farm5.staticflickr.com/4350/...cbdc2d8d_c.jpg

F8:
https://farm5.staticflickr.com/4366/...9df2f80d_c.jpg

F16:
https://farm5.staticflickr.com/4368/...77f71424_c.jpg

^^ Holy shit is that a 135 f1.4?

I designed in on my own based off of my Bessa and Zeiss grips. Scanned the bottom plate and went from there. I have my own printers and this design uses about 27g of material so about $0.81 and took 2 hours at high res.

I find the A7ii grip quite nice though. I just add the bottom part of my L plate to make it chunkier.
http://briansmith.com/wp-content/upl...-Bracket-1.jpg

Yeah, the Mitakon 135mm F1.4.

Holy crap the RD1S' grip looks so good.

The complaint I have with A7II grips, including the JB one I'm using is that they add too little to provide a better grip. All of them adds a few mm on the vertical (y-axis), but nothing on the X and Z axis.

So I decided I needed a grip for my Canon P as well.
Flocked interior so it doesnt scratch the bottom plate, recessed tripod mounting screw so the camera can sit flush and added some leatherette on the grip again.
http://i.imgur.com/o6la6lx.jpg

Everything all together. (with a CV21)
https://farm5.staticflickr.com/4341/...5d254964_b.jpgCanon P with custom grip by Richard Tran, on Flickr

Not sure where to ask... so I'll do it here;

When's the next photowalk, Bill?

Haha wow bump!

A7R4 announced 61mpx, 4k with slog 2/3 etc etc
September
https://www.sony.com/electronics/int...tions#features