|
A blackvue DR400 II customer come back for upgrading his Finevu CR500 with Power Magic Pro http://farm9.staticflickr.com/8543/8...1a2fda83_c.jpg http://farm9.staticflickr.com/8546/8...5e83fcb7_c.jpg http://farm9.staticflickr.com/8393/8...166475f1_c.jpg http://farm9.staticflickr.com/8255/8...c13a99b4_c.jpg He also get 2 projector LED lights from us.They are nice angle and bright. 2 X T10-1W projector lens+3 - LED Lights - Electronic Products - Products http://farm9.staticflickr.com/8124/8...1e4f9a13_c.jpg http://farm9.staticflickr.com/8116/8...a3111526_c.jpg |
LED lights, Dash Cam, Plastidipped on F150. http://farm9.staticflickr.com/8547/8...08f6d094_h.jpg |
Vicovation TF2+ Rear View with 5% tinted window |
We did a troubleshooting and wiring a DR380g with Power Magic Pro, and set up motion and G sensor in parking mode on SD card. We highly recommend Blackvue owners set motion sensitivity to insensitive side, but not off. Tested after motion setting up, motion detection area is about 5 feets which is good enough. You only need camera record in parking mode when a person approach to your vehicle. http://farm9.staticflickr.com/8276/8...51ff85f7_b.jpg |
^ did you set it by trial and error? Is it possible to get a screen shot of your sensitivity settings so I can put it at the same settings? |
^there you go buddy. http://farm9.staticflickr.com/8545/8...c24f5f2e_b.jpg Make sure the motion dection is on insensitive, not off. http://farm9.staticflickr.com/8536/8...8fb82e90_b.jpg |
ASR LED testing |
do you have any RHD customers that run their cam on the left side of dash and use video-out to connect to a LCD monitor? something like this ContinentalCamT - RHD or LHD Car Camera Driving Aid - For when driving in Europe or when driving a LHD car import. |
A navigation in dash is same as LCD monitor, you don't really need that. Finevu or blackvue have video out cable come with the camera. So as long as you have a LCD screen in your dash, you can plug the video cable to the outlet, the camera will plug and play on the screen. |
Protectdip VS Plastidip From the picture you can tell, plastidip is more rough finishing. Protectdip has more smooth finishing. http://farm9.staticflickr.com/8554/8...2f9ab825_b.jpg Plastidip Finish http://farm9.staticflickr.com/8542/8...a53035e6_b.jpg Plastidip Detail http://farm9.staticflickr.com/8542/8...9e2b15e3_o.jpg Protectdip Finish http://farm9.staticflickr.com/8403/8...da534e16_h.jpg Protectdip Detail http://farm9.staticflickr.com/8117/8...c6f3de68_o.jpg |
Quote:
but if you put the cam on the side of the dash it'll have the fisheye effect right? As long as it's still clear enough to read license it's fine...I was thinking of it it double up as a way to see incoming traffic when making left turns in a RHD vehicle. |
Wil, looking for REVERSE bulb LEDs for the 08 TL... obviously need them brighter than stock... suggestions? Also.. my upcoming summer project: 9005 DRL - LED bulb upg..will require resistors..will you stock that stuff? |
Quote:
Check this out This projector has 3 pcs 4300 K little LED on the side of the bulb, and a big 6000K LED in the projector. I am using this one on my car as well http://farm9.staticflickr.com/8404/8...bd013b08_h.jpg http://farm9.staticflickr.com/8554/8...c5483274_h.jpg |
Quote:
|
MK1 Freak Hyundai Sonata all KDM rear conversion done Tonight, we did some touch up for MK1Freak's 2012 Hyundai Sonta. We uninstall the halogen reverse bulbs and install the 921 Project Reverse LEDS on. Before with Halogen bulbs: http://farm9.staticflickr.com/8535/8...76f7de1a_b.jpg http://farm9.staticflickr.com/8534/8...30124d1c_h.jpg After with projector LEDs: http://farm9.staticflickr.com/8400/8...9d3a03cd_h.jpg http://farm9.staticflickr.com/8278/8...c342636f_b.jpg The projector leds has a nice angle curve in white and yellow because of 6000K LED and 4300K LEDs http://farm9.staticflickr.com/8415/8...b4b87125_b.jpg |
Gunmetal Plastidip |
Quote:
|
Gunmetal and Black plastidip in stock http://farm8.staticflickr.com/7359/8...52147f68_b.jpg We are Retail/Wholesale Plasti Dip Different Colors available. 1-4 cans Price includes tax. $12 Each for Balck $16 Each for Gold Metalizer Silver Metalizer Smoke Blue Green Orange Pink Purple Gunmetal Red Yellow White Camo/ Each [5 to 36 Cans] $10 Each Balck $14 Each Gold Metalizer Silver Metalizer Smoke Blue Green Orange Pink Purple Gunmetal Red Yellow White Camo [36+ cans please come to see us for wholesale price] |
F150 with dipped accesories We will keep this F150 clean as much as possible. We only dip some accessory parts on this vehicle, not the whole vehicle. Front is done except the headlights. It will be disassemble and paint in VHT black http://farm8.staticflickr.com/7358/8...e4da4814_b.jpg The rear bumper chrome piece dipped in Matte Black http://farm8.staticflickr.com/7422/8...1e35d97a_b.jpg It is important to do that under warm weather, that will make your dips perfectly smooth. http://farm8.staticflickr.com/7446/8...bedb1def_b.jpg Getting some LEDs changed inside of the F150 http://farm8.staticflickr.com/7412/8...06bbdb53_h.jpg |
Installed a Finevu CR500 with Blackvue Power Magic Pro on BRZ |
Hardwiring Blackvue DR400 II with Power Magic Pro on Evoque |
Hardwiring Finevu CR500 on a MB C63 |
is the new power magic smaller? |
^same size like before. |
your store location is 8600 Park Road, Richmond. BC. Canada. I google'd it and saw its a residential area.. would like to check out the LED lights.. |
| All times are GMT -8. The time now is 11:52 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net