Hey can any one these be set to record the entire time while parked instead of just when the sensor senses someone?

For sure. Any one of these cameras will do if you set the motion sensitivity over medium level to top level. The motion sensors will be so sensitive that the cameras will keep recording. However, your vehicle battery voltage will drop faster because the cameras are never under stand by mode.
Stand by mode will help the battery drop slower and the camera will not be that warm. If you have any further questions, please follow up.

Need some help here.

Had the 380 with power magic pro installed last week and I'm having parking mode problems. It's already set to 11.8v for cut off.

Seems like everytime I turn off the car, the max it will record is <1hr. I've tried charging the battery overnight and trying it again, but results are the same.


When the camera stops recording, I measured the battery with my eliminator charger and it still reads ~12.4v. Is it not reading correctly? Would a multimeter be more accurate?

My car (driven daily) is a little bit over 2 yrs. Would the battery be the problem? Or is there something wrong with the power magic pro.

I need to test your battery first when the power magic pro shuts down. Try setting the timer to INIFINITY time on your power magic pro. I set the motion sensitivity very low on that unit because I don't really want it turn on/off quite off unless people reach your vehicle.
After I installed the power magic pro, I test your battery voltage is 12.08V. I set the configured voltage to 11.8V. The power magic pro cut the power off for some reason for sure. Bring your car back, and I will check it for ya

Thanks for the quick reply William! It seems like I might have found the problem.

New BMW's (looks like Mini too) have a battery "sleep" mode after about 30 minutes. They suggest hardwiring to the battery which I don't want to do.

I'm going to test out other fuses to see if there is 1 that will not "sleep". I will update u soon


Edit. Changed to another fuse that doesn't go on standby and it's all good now

so which constant one you connect to? Also did you connect the wire to no power end on the
fuse panel?
Posted via RS Mobile

http://farm9.staticflickr.com/8222/8...c86892de_b.jpg

http://farm9.staticflickr.com/8493/8...cc38fc65_c.jpg

These four tires took me about 2.5 hrs to get them done. 5 layers paint on all of them.


Tire paint: http://artofspeedracing.ca/index.php...20-bundle.html
http://farm9.staticflickr.com/8213/8...3c0bbddc20.jpg

5 layers paint then got this pictue.
http://farm9.staticflickr.com/8357/8...0148f7a3b4.jpg

Today is the last day of 2012. I appreciated all of customers and friends support our business in 2012. I represent Artofspeedracing Canada/China (headoffice) to wish everyone enjoy the last day of 2012 and a Happy New Year. We see you guys in 2013.

Had a 380G installed tonight by asr. Great guy, great service. Thanks! Hope you found time for dinner!

Moved the wire from the "interior lights" to the "comfort access" [keyless entry] one. Been working great so far.

Thanks again.

Picked up a 32GB microSD card from ASR last night. =) Thanks ASR!!

is it bad to leave the blackvue unit inside the car overnight in the cold?

http://www.blackvue.com/product/dr40...images/7_8.jpg

according to this the blackvue's operating temp is from -20 to 70 degrees...
(Blackvue DR400G HD II, not too sure if it's Celsius or Fahrenheit, I assume Celsius)

^OK Cool. Thanks for let me know.

2004 Mazda 3
http://farm9.staticflickr.com/8212/8...dfc32521_b.jpg

2013 Toyota Sienna
http://farm9.staticflickr.com/8351/8...aaa9a0f8_b.jpg

thanx.. nice it works up to -20... I doubt it will get anywhere near -20 here in Vancouver.. haha

Just wondering where I can pick up some refills for those blang air sticks? Should I just give you a call? Or is there a storefront I can pick these up from?

^We don't have store. Office location is 8600 park rd richmond. Pleae call before you come. Thanks

Hey ASR, have you tried using a GoPro yet? any ways to hard-wire one?

^Go pro is for sporty video recording. It should be not hard to hardwiring one. But what is the purpose to hardwiring a go pro? Night footages is horrible. Dont know how the night image quality on a HERO3 Black edition tho.
Posted via RS Mobile

I don't think you can even hardwire cause it only runs on battery power no external power plugs on it. Also it doesn't auto start recording or anything so you will have to do it yourself
Posted via RS Mobile

^Teh Interwebs of Joe | My GoPro hard wire setup and remote trigger.$$$ I...
I am wondering you still need to invest more than over $100 for hardwiring a Go Pro. Does it really worth the money to do?

The night quality is actually pretty decent with my Hero 3 Black. Thanks for the input!