[incubus]

yes international does do the discount on mil/le

anything helps especially with prices going up cause our dollar isn't very strong

[Stormspirit]

so... I want a awp painted assimov style model gun and hang on my wall for new house decoration purposes. How does one without a license achieve this without Getting in trouble? Where to buy and anyone that does this kind of painting job?

[BrRsn]

^airsoft

[Eternal_SiR]

decided to take a small family picture of one of the safes.
http://i833.photobucket.com/albums/zz260/Eternal_SiR/20150221_103928_zps9owg1896.jpg (http://s833.photobucket.com/user/Eternal_SiR/media/20150221_103928_zps9owg1896.jpg.html)

[ODStryker00]

Finally got the red dot i've been eyeing for a while now for my AR. Sighted in this bad boy at 50 yards this morning. With all parts I've wanted for this rifle, this project is considered "finished" for now.

Now off to my 11.5 AR build.....


http://i61.tinypic.com/n1c9ow.jpg

http://i59.tinypic.com/3460yn9.jpg

http://i62.tinypic.com/11mfihw.jpg

http://i59.tinypic.com/2jd4d8o.jpg

http://i58.tinypic.com/35kj21g.jpg

http://i62.tinypic.com/orhv5s.jpg

[Zedbra]

So - I am really wanting to get into reloading. ANy here current doing it? I will probably only load about 200 rounds at a time, so I don't need anything too crazy. Any advice?

[ODStryker00]

So - I am really wanting to get into reloading. ANy here current doing it? I will probably only load about 200 rounds at a time, so I don't need anything too crazy. Any advice?

Reloading is something I definitely want to get into. However it's another thing to learn and another thing to put time into. Since I am only shooting 9mm and 556 at the moment, it's not really worth it for me to invest the time and money into it. It's definitely something I will get into when I buy a .308 and get into precision shooting. Hopefully bythe end of this year.

[Eternal_SiR]

I currently reload for 9mm, 8x57 and 308. I have the basic Lee Pro 1000 for the 9mm. If i hit it hard, i can load about 500 rounds and hour. For the rifle rounds, its a slow and meticuloud process. For me to load about 1k 9mm will cost about $200 in materials.

[Zedbra]

I currently reload for 9mm, 8x57 and 308. I have the basic Lee Pro 1000 for the 9mm. If i hit it hard, i can load about 500 rounds and hour. For the rifle rounds, its a slow and meticuloud process. For me to load about 1k 9mm will cost about $200 in materials.

I haven't priced out the materials costing yet, but I plan to reload for .357, .38 Special, and 7mm Rem MAG. All of those are costly when store bought. Just trying to read on what press/equipment to seriously consider.

[Eternal_SiR]

i guess it really depends on your budget. I picked up the pro1000 off CGN with the 9mm setup for like $150. The rifle press i bought the Lee 50th anniversary set, they're going for $150 new right now. I guess it comes down to how much your willing to spend and how much you are going to reload. I only every make it out shooting only a handful of times a year so i really don't need a machine that can pump out thousands in no time as i haven't gotten to that type of demand for ammo yet. Don't get me know, i still keep around 5k of rounds total of various calibers ready to go at any time.

[CRS]

decided to take a small family picture of one of the safes.
http://i833.photobucket.com/albums/zz260/Eternal_SiR/20150221_103928_zps9owg1896.jpg (http://s833.photobucket.com/user/Eternal_SiR/media/20150221_103928_zps9owg1896.jpg.html)

http://i.ytimg.com/vi/edzmGZIcHxI/hqdefault.jpg

[Zedbra]

i guess it really depends on your budget. I picked up the pro1000 off CGN with the 9mm setup for like $150. The rifle press i bought the Lee 50th anniversary set, they're going for $150 new right now. I guess it comes down to how much your willing to spend and how much you are going to reload. I only every make it out shooting only a handful of times a year so i really don't need a machine that can pump out thousands in no time as i haven't gotten to that type of demand for ammo yet. Don't get me know, i still keep around 5k of rounds total of various calibers ready to go at any time.

I spoke to Henry at BudgetShooterSupply today. Looking at setting me up with Lee Turret Press Kit, dies, primers, 2000 rounds of bullets for 38 and 357, couple pounds of powder, all for under $500. He doesn't have any 7mm MAG dies right now.

Seems fair, he spoke to me for some time and I have heard a lot of good things about him from other local people that have dealt with him.

[Eternal_SiR]

yes, Henry is a great buy, and he lives about 15 mins from me. I purchase most of my reloading supplies from him, great guy to deal with. Only thing to watch out with a turret when your pumping out rounds is to make sure you full stroke the ram. A slight short stroke can end up with a squib. such a pain as your blasting off rounds adn the click, no bang but the bullet is lodged into the barrel. Lucky every time it has happened to me the bullet wasnt far enough down the barrel to be able to fully seat the next round.

[Zedbra]

^ going to see what he gets back to me with price wise, he's putting together a package price for me. However, I found a few grips and two new barrels for my Dan Wesson tonight, kinda blew more than I wanted to but it is worth it.

[originalhypa]

^
Henry is a good guy. We got some powder from him a while back. Now I need to talk to him again about some 45/70 dies. I paid $54.99 for a box of 20 45/70 rounds.

Granted, it is an elephant gun with bullets larger than the average revscene user's peepee.
It's the one on the left side, next to the .308

http://i7.photobucket.com/albums/y253/MikeZQ8SS/Marlin%2045_70/DSC_0014.jpg

[Eternal_SiR]

^ very nice.. thats quite the elephant killer round. Must be a blast to shoot.

[Zedbra]

Quote came in - including powder and bullets for the .357 it was $949. Going to have to wait a little to pull that off.

[Hondaracer]

Eternal, so that bottom one which you showed before is the modded 10-.22 right?

if so, so what do you get as the base model before the build?

[incubus]

I'd go base model imo

I have customer's who change everything and the only thing that's stock is the receiver

quick question here is everyone here just into restricted, plinkers, hunters or all the above?

happy Friday guys

[Eternal_SiR]

the G36 look alike is a base model 10/22. Like incubus said, if your changing out everything, no point paying for the higher model and take all the goodies off.

I'm more into plinking, target shooting. The odd friendly competition between friends, 3 gun style on their farms.

[Zedbra]

Hondaracer - if you want to do your own build, start with a Dlask receiver and go from there.

incubus - I'm into all the above now. Started plinking and hunting, have now moved onto restricted hand guns. I quite like shotgun trap shooting as well. It's all good, albeit expensive.

[Eternal_SiR]

one thing to remember about the dlask receiver is that depending on the stock you want, it may or may not fit due to the integrated rail on top of the receiver.

[originalhypa]

^ very nice.. thats quite the elephant killer round. Must be a blast to shoot.

It's a ton of fun. I'm having a hell of a time finding a set of peep sights for it. Not so much finding the sights, but getting over spending $200 on sights and a rail, and another $2.75/shot.

I can't imagine how guys who own cannons feel when they add up the cost of their passion.
:lol

Quote came in - including powder and bullets for the .357 it was $949. Going to have to wait a little to pull that off.

The initial cost is high, but it will pay off in the long run. I'm heading out to test some .223 and 9mm reloads that my brother was toying with. They're + loads, so we're trying them in the Jericho 941. That gun is a beast.

If the .223 cycle in my T97 without problems, they'll work in anything.


quick question here is everyone here just into restricted, plinkers, hunters or all the above?

happy Friday guys

All of the above!
We pink for fun and sport, betting with friends, etc. But in the end it's all about having confidence in my equipment and skills, making one shot kills when I'm called upon. The last thing I want to do is chase a wounded animal into the bush. I don't like my food to suffer.
:smug:

dlask receiver

:fuckyea:

Dlask is so money.
If I knew how much I was going to put into my 10/22, I would have started with a Dlask like my buddy recommended.

At least I started with a base model.

[Hondaracer]

With the integrated rail is this an issue that is like, won't work period with some stocks due to design or it will work with some modification?

[Eternal_SiR]

it won't work period. Depending on the stock, in my case with the g36 stock, it would not fit as the receiver sits inside the stock completely. I guess if the stock exposes the top i don't see it not fitting, or at least will fit with minor mods

[Zedbra]

After months of reading and thinking it over, I finally made the order for all of my reloading gear. Henry at Budget Shooter was awesome to deal with, always took the time to answer all of my questions. Now, I wait for Canpar.

Decided to skip outta the office and hit the range, I wanted to zero a new scope on my 7mm. Not one person was at the range - it was perfect. Took my .357 with me, it was shooting great as well. Just a great day of first thinking about and then getting the aromatherapy of gun powder.

[Eternal_SiR]

good stuck.. wish i could hit the range. With my current medical problems i can't even shoulder a rifle.. quite depressing... bought 2 new rifles and can't even shoot them. Which range did you hit up Zedbra?

[Zedbra]

I shoot at the Squamish range, so I have to cleverly plan my escape from my office in Coquitlam to catch daylight here.

Can you shoot pistols?

[CRS]

good stuck.. wish i could hit the range. With my current medical problems i can't even shoulder a rifle.. quite depressing... bought 2 new rifles and can't even shoot them. Which range did you hit up Zedbra?

Well, they're making you depressed and you're tired of looking at them, I'm sure I can take them off your hands.

:troll:

[Eternal_SiR]

I shoot at the Squamish range, so I have to cleverly plan my escape from my office in Coquitlam to catch daylight here.

Can you shoot pistols?

I basically can't to a whole lot, anything that causes sudden impact on my body is no go, even if i take a step while walking wrong, it'll send lightning up my leg, up the back and then explode down in the ankles.


Well, they're making you depressed and you're tired of looking at them, I'm sure I can take them off your hands.

:troll:

hahah thought about it, but using them as a motivation to get healthy again so i can shoot the crap outta them.

[Zedbra]

I basically can't to a whole lot, anything that causes sudden impact on my body is no go, even if i take a step while walking wrong, it'll send lightning up my leg, up the back and then explode down in the ankles.

.

You should drive up, give me a reloading 101 course. :whistle:

What will make your back/spine better?

[Hondaracer]

Booked my shooting for my birthday in Vegas lol, going to battlefield vegas

Shooting the Barrett .50 cal, M60, and SCAR

May throw in the Deagle if it's not too much $$$ but I've shot big hand guns in the past so not too concerned if I dont

[Zedbra]

^ I'll be in Vegas in June but I am gonna rip up the sand dunes instead.

Spent some time at the range with my son yesterday.

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/2015-03-21%2016.19.33_zpsk5ef7ll6.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/2015-03-21%2016.19.33_zpsk5ef7ll6.jpg.html)

This was the first time I let him shoot any pistol. Before the keyboard critics jump in - I loaded one .22 at a time - he was not able to go Rambo with a semi auto and I tried to make him wear eye protection but there were others at the range blasting off large calibre rifles and the glasses were leaving too much of a gap for the ear protection to work.

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/2015-03-21%2016.04.32_zpsnpq5zbmu.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/2015-03-21%2016.04.32_zpsnpq5zbmu.jpg.html)

[Eternal_SiR]

You should drive up, give me a reloading 101 course. :whistle:

What will make your back/spine better?

i was actually just up your way, spent the weekend in whistler. Right now take some heavy meds.. going into the hospital tomorrow morning to do some scans and test. Right now i think my only solution is surgery which i'm somewhat scared of someone taking a knife to my spine

[Zedbra]

Well, good luck with the scans and with your decision. I would be leery of someone taking a scalpel to my spine as well.

[CRS]

i was actually just up your way, spent the weekend in whistler. Right now take some heavy meds.. going into the hospital tomorrow morning to do some scans and test. Right now i think my only solution is surgery which i'm somewhat scared of someone taking a knife to my spine

My dad just underwent surgery on his spine as well. He had a herniated disk resulting in compression of the nerve cord. Before he surgery, he was basically bed ridden and on pain killers too (could barely walk).

He went to Lionsgate for day surgery after an MRI was done. It was a day surgery and the cut is about an inch. Fast forward a week and my dad says he's at 95%. Back on his feet and doing everything he was before.

If you have the same thing, I suspect you'll have a swift recovery as well.

[Eternal_SiR]

i hope so too.. sounds like he got the minal evasive surgery which is about an inch cut. Depending on how serious or how many locations i'm messed up it, they may need to slice me right up the spine. *shivers* I guess i'll find out within the next week or so how serious it is..

[originalhypa]

I'm in the same situation as you are Eternal.
L5/S1 pinch due to an undiagnosed fracture at some point in time. Today is week #7 of the current flare up, and I've already had a couple of Tylenol Arthritis :(

One thing I can take solace in is shooting. If not for the heavy gear and targets, I could shoot all day long. I've been able to rig up a cart for my heavy gear, so as long as I have someone to haul the AR500 gong out to 100 yards, it's going to be a good day. Good luck with your situation. I'm hoping that they can fix you up like they did CRS' dad.



Also, guns.
http://img.photobucket.com/albums/v253/hypasteve/IMAG0122_zpsucgaasza.jpg

1954 Tula SKS, the T97, and Jericho 941 in 9mm.
The T97 was giving me some trouble with the trigger pin popping out of the mechanism. I can't wait for the lower hand guard to come out.....

I also should have taken some pics of the Tavor, Cx4, 30-06, and some of the other toys we had out that day. But, you know how it is on pain meds.

[Eternal_SiR]

very nice, its been a long time since i've been to the range. I think i'm on month 8 with my flare up.. been on all types of meds and i hate it.. totally mess with the body, the contant nasuea, being bunged up and feel like your literally shitting bricks when you actual can crap.

Been on T3, naproxen, diclofenac, hydromorph, morphone, percs, oxy.. all with little to no effect.

[originalhypa]

That really sucks.
:(

I've never even seen a Percocet, let alone had one not work for the pain. Good luck man. The meds are horrible, for sure. T3 and diclofenac were enough to mess with my system, but as long as I had a couple T3 every 4-5 hours it was manageable. At least now I'm on OTC pain meds which are so much less harmful to the system. Hopefully the medical community will recognize that you're a young man with lots of years left in you, and put you back together. Good luck man, and keep us updated. It's a common, shitty situation and the first battle to win is finding a doc who actually gives a damn.

[Eternal_SiR]

agreed. I tried to get my doctor to sign of on my pot card and he said no, yet had no hesitsation to prescribe me the hard drugs. I mean i use pot to calm the nausea and the stomach pains but nope.. just refused to sign it. He said he has a patient that has something similair to me and had to go for surgery.. and that person is still waiting and its been over a year already.

[originalhypa]

Today would be a good day to shoot.
I'm waiting on a rear sight for my 45-70, then I get to sight it in using ammo that averages $2.70/shot. Should be fun for everything except the wallet.
:lol

[Eternal_SiR]

Today would be a good day to shoot.
I'm waiting on a rear sight for my 45-70, then I get to sight it in using ammo that averages $2.70/shot. Should be fun for everything except the wallet.
:lol

anyday shooting is a good day. i think its been over 8 months since i fire any gun

[Zedbra]

Today would be a good day to shoot.
I'm waiting on a rear sight for my 45-70, then I get to sight it in using ammo that averages $2.70/shot. Should be fun for everything except the wallet.
:lol

Reloading time! I just mounted my turret press, I will try to get it all set up and running by the end of the weekend. Looking forward to finessing my rounds.

[Eternal_SiR]

becareful of short strokes. I had a few of those when i was pumping them out. Made a few squibs but luckly they were barely charged that it wouldn't let the pistol fully chamber a new round.

[originalhypa]

luckly they were barely charged that it wouldn't let the pistol fully chamber a new round.

That's what scares me about reloading. I did some measuring on my brother's 5.56 reloads, and they sat a little taller than the AE or chinese surplus.

Taking parts of the gun to my face doesn't really appeal to me. Especially as a bullpup shooter.

Kappa

[Zedbra]

Well, pumped out about 20 rounds this morning after getting it all set-up. It took a while to get it adjusted exactly where it needs to be - mangled about 6 rounds figuring it all out.

What surprises me is just how little gun powder is in the casing. Not much. Still trying to read definitive answer as to how far to seat my different bullet types. Lots to learn.

[Eternal_SiR]

yeah thats the hard part, finding the perfect seating depth. When i first started reloading, i tried to copy factory ammo recicpe, same powder, same grains, and same bullets. Then took calipers to see how far OACL was and tried my best to match. Which turret did you go with? What are you using to clean your brass? I use an ultrasonic cleaner. I have 2 sizes, a big and small, small one does about a batch of 400 9mm. the big brother does about 1500 .308 brass

[Eternal_SiR]

That's what scares me about reloading. I did some measuring on my brother's 5.56 reloads, and they sat a little taller than the AE or chinese surplus.

Taking parts of the gun to my face doesn't really appeal to me. Especially as a bullpup shooter.

Kappa

agree'd, i haven't started with the 5.56 yet as surplus is still cheap. Once they start going up higher in price or lack of supply. Plus i'm just plinking with the T97 and AR so don't exactly need precision loading.

[Zedbra]

yeah thats the hard part, finding the perfect seating depth. When i first started reloading, i tried to copy factory ammo recicpe, same powder, same grains, and same bullets. Then took calipers to see how far OACL was and tried my best to match. Which turret did you go with? What are you using to clean your brass? I use an ultrasonic cleaner. I have 2 sizes, a big and small, small one does about a batch of 400 9mm. the big brother does about 1500 .308 brass

Seating depth and then crimp die settings were the hardest to get just right but once you get it figured out it is pretty straight forward. I am just reloading for my revolver right now, so OAL is not as important as a semi-auto or rifle. Once I feel confident with some more rounds then I will read and take on reloading my 7mm MAG rifle rounds, I have several hundred cleaned brass ready to go.

For cleaning I just bought a Frankford Arsenal EZ Tumbler. Using corn media and a little polish - the casings looked new even after running 800 cases through them. Ran each batch for 3-4 hours. Cheap and easy. For reloading I went with the Lee Classic Turret set-up. Everything about the kit is good except the scale - I need a better scale and preferably a digital one - I'm going to look into that ASAP.

Just got back from the range and all 60 rounds of .38 SPL fired as expected. I still have all my fingers. :fuckyea:

I will reload a bunch more and then get into some hotter loads of .357. The wad cutters were not as accurate as the jacketed rounds, but I will play with the loads a bit to see if I can balance that out.

[Eternal_SiR]

Looks you got a good setup going. just watch out for stuck media in the flash hole. Definitely a digital scale makes the world of a difference. Glad your getting good results. Like you said, your first load for a wheel gun is much safe for learning. As long as its not a double charge, thats all that matters.

[Zedbra]

Trying to figure out all the little things you need is time consuming for reloading. Now I am trying to figure out what I need for resizing/honing/ etc. I have one piece, but then you need this and this....etc.

I managed to reload 100 .38SPL yesterday with two different grain loads and 148g wad cutters. Also managed to reload 100 .357 MAG rounds - again with two different grain loads and copper jacketed 158g bullets. Looking forward to starting the testing to see what works best.

[Eternal_SiR]

welp. prognosis of my scans didn't turn out as i hoped. Minor disc degeneration from L1-L5 vertabrate, moderate from L5 down. Also causing spinal stenosis. Instead of the disc bulging to the sides, mind is going straight into the spine which is causing it to put pressure on my nerve which explains why my legs will get tingly and numb when i stand. So off to the specialis referal now and the waiting game beings. I had a 66% chance of being able to be easily operated on but just my luck i fell into the 33% that is not so easy. FML

[originalhypa]

Stay positive man.
At least you're past this stage and moving on to the next one with the specialist. Modern back surgery is a lot less invasive, and a lot more successful today. Plus you're in good hands in BC. There are a lot of good surgeons who work in our region.

There is truth to staying positive though. While your case may be difficult, it's not impossible and that is a hope to hang on to. Think about going to your first IPSC match after all this is said and done. It's going to be all the sweeter when you get there :)


Also, guns.
I'm still waiting on my 45/70 sights.

And also those Remington 870 parts from Int'l.
Any word on those, incubus?

[Eternal_SiR]

Thanks for the words of encouragment. Was pretty depressed all weekend but trying to stay positive. Already going through enough as is don't need to add depression to that list. lol.

Gun related:
You guys hear about canadammo and their BOGO 1/2 off shotguns? Was so depressed on the weekend and almost did some retail therapy and was just about to order all the stuff to build an SBR AR, but decided against it.. or at least till i'm done doing my taxes

[Zedbra]

Sorry to hear about the diagnosis - I always say you're only as old as your spine.

If you ever want to come up to the range here sometime, even if it's for the drive and some lighter recoil shooting, lemme know. Can also go out and blow some Tannerite - that's a good anti-depressant. :fuckyea:

[Eternal_SiR]

thanks for the offer. Definatly keep that in mind. I still have 6 lbs of tannerite i need to shoot. I can always run my sub sonic rounds through my 308. its almost like shooting a supressed 223.

You guys hear about the new indoor range opening up in langley. Calibre up to 7.62x39.

[originalhypa]

That range was a pipe dream that turned into a reality. It's crazy that it all went through, especially with the anti gun crowd still being so vocal.

therangelangley.com (http://therangelangley.com/)

The best part is, it's just down the street from my work!!!

Keepo

[Eternal_SiR]

Nice, thats awsome for you. I'm only about 25 min drive, so not horrible. Should do a meet there one day. I talked to the people there, range should be ready for live fire in another month or so. They are open for open house and membership. I just love not having to go out to mission to shoot the T97/AR

[originalhypa]

Nice, thats awsome for you. I'm only about 25 min drive, so not horrible. Should do a meet there one day. I talked to the people there, range should be ready for live fire in another month or so. They are open for open house and membership. I just love not having to go out to mission to shoot the T97/AR


I just renewed my membership at my range. It's reasonable at $150/yr. I use it quite often, and even more often when I'm injured and can't play hockey.
FailFish


Anyway, I'm hoping the prices won't be out to lunch like DVC. I'm actually going to head over to the Langley range in a bit to check it out. I didn't know they had people working there already. Maybe with a range so close to work, I can justify an AR now. hmmmmm......... Kappa

[Eternal_SiR]

hahha let me know how it is, been meanign to check it out but haven't really had time to make my way out there.

[Zedbra]

Isn't all of Langley a shooting range? :lawl:

I think I am gonna be shooting this good Friday - I'm really wanting to test these reloads for my .357.

[Eternal_SiR]

hahahah so true so true.. Their chuck norris lounge is pretty cool for having a party and what not.

Inquiring about a package for an upper. If anyone is looking to build a new upper, heres a good base kit

http://www.rustywood.ca/tactical.html

7.5" PDW here i come

http://i1158.photobucket.com/albums/p613/runningfoolCGN/IMGP6433_zpsfed24985.jpg

[Zedbra]

I want to give a shout out to Ed at International Shooting Supplies in Surrey. That guy always takes the time to discuss with me in-depth about whatever subject I have on the go. I just spent another hour there yesterday going over reloading information with him and I think he appreciates people that are right into the hobby. Walked out with a few small items (and a new Chrony) that will really take my reloading in the direction I want it to. Still smiling.

Basically, I say 'hi' to incubus and then chew off Ed's ear cuz I'm more of a rifle guy and incubus prefers his 9mm's blazing. :noyoudidnt:

They have some Mini Mags in stock, I took 10 boxes home. Took them to the range later and they are just in the plastic holder the cardboard box - they aren't in their usual plastic cases anymore. Thumbsdown on that if you want to take them anywhere except the range.

[Eternal_SiR]

Zedbra, ISS is my go to place as well, despite not being the closest one, i've always had top notch service there. Always end up walking out with wayy more than expected. You can never have too much ammo either. I usually keep at least 4k factory ammo at home. Need to stockpile some more now, at one point i think i had over 10k misc rounds.

[Zedbra]

Oh, I think I am around 10k rounds about now. I spread my buying over several local shops and do not buy online stores except Budget and Stoeger (for some mags I needed). Generally, I buy a lot of my basics from Italian because it is close to me and their prices are the same as others but they offer the BCWF discount on ammo and accessories, saving a lot of money over time; they just don't have the best stock I find.

A good friend finally lent me his early model Ruger .44 MAG Deerfield Carbine to try out for a while. This things is getting rare and is the predecessor to the 10/22 but with a lot more dropping power. I can't wait to put some through it tomorrow.

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/2015-04-02%2021.26.13_zpspad7grhd.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/2015-04-02%2021.26.13_zpspad7grhd.jpg.html)

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/2015-04-02%2021.25.41_zpsseu14aax.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/2015-04-02%2021.25.41_zpsseu14aax.jpg.html)

[incubus]

yes Ed is very knowledgeable and a great guy to talk to.

I apologize for my love of ars and pistols :lawl:

I keep saying I'll build a bolt action but got a good deal on a sig 516 :awwyeah:

[Zedbra]

^ you had a few beautiful rifles in your inventory. That used custom 7mm MAG is still on my mind. If you want one rifle that will last your lifetime and then some, I'd add that one to your steed.

Today I deprimed, trimmed, chaffed, measured, washed, then tumbled (still tumbling the last 75) 150 7mm MAG cartridges - ready to load. I learned a few things: reloading rifles rounds is tedious, large primer pockets are not fun to clean, you can always tell good brass when you first pick it up, and don't wait to prep 150 hunting rounds - that took hours.

I also stripped the stock of my friend's 44 carbine, it has a large 4" crack that I am going to repair, though I did tell him to order another stock while they are still available. Should be a fun little side project.

[Eternal_SiR]

stopped by the new langley range going up. Still a long ways for opening but the owner is an awsome guy. Military police. Opening date has been delayed as they scrapped the origional 7.62 limit and redisgned the backstop to handle 50BMG. Went over the plans and layout with the owner and place should be pretty damn slick when its done. They are going to be able to do IPSC, 3 gun and what not. super excited

[Zedbra]

Can anyone suggest a cheap red dot that I can add to my son's .22 Rascal? Or a red dot/laser?

[Eternal_SiR]

i picked up a cheap chinese knock off for my 10/22. Works great, keeps zero and best of all, was only $30. Check out aliexpress

[originalhypa]

I have a Bushnell TRS-25 on my 870 shotty. I didn't like it for any of my other rifles, as I prefer to shoot further than I can see. But it's been solid, and it's a lot of fun with slugs.

[Hondaracer]

Anyone know anywhere locally that carries this ISSC MK22 ?

http://i4.photobucket.com/albums/y136/sniperslayer/A3A90380-9D70-4DA4-88E1-B8E99F166B7C_zps19tbmjaw.jpg (http://s4.photobucket.com/user/sniperslayer/media/A3A90380-9D70-4DA4-88E1-B8E99F166B7C_zps19tbmjaw.jpg.html)

I probably should have bought it at the gun show but I wanted to read reviews on it first. Seems to have a few issues with easy fixes. And a lot of people seem to complain about the build quality but I played around with it a bit and it felt fine to me. I just wanted somthig thay looks like the SCAR lol..

[originalhypa]

I was toying with that gun on Sunday.
It is a really nice gun to shoot. One of my shooting buddies has one. I mocked him for spending so much on a rimfire SCAR wannabe, until I emptied a couple of mags through it. It cycled beautifully, and worked flawlessly throughout the day. It was really consistent in the way it shot too. The MK22 is a nice gun, albeit pricey. It's heads and tails better than my dad's Mossberg 715T. At least the MK22 has some nice build features.

So many SKS and 12 guage shotguns at the show over the weekend. I bought a nice Sun Optics green LED with laser that I mounted on my 1911. I should take a pic of that. Bought some cheap precision tools from the tool guy for $6, along with some smoked salmon. I was going to buy a "Surrey Strong" shirt too, until I came to my senses :lol

Can anyone suggest a cheap red dot that I can add to my son's .22 Rascal? Or a red dot/laser?

if you still have that 22 optic, we could work out a trade for my TRS-25. It's just sitting on my 870, and honestly I would prefer some sick battle sights on that anyway.
http://www.bushnell.com/hunting/rifle-scopes/trophy-red-dot/trs-1x-25mm

Gonna be in Langley in the near future? Come by!
Or Whistler? I'm heading up to Alta sometime in the next few weeks too. Especially with the hill opening up on May 2.

[Hondaracer]

that gun show was kind of a joke, but i guess there arent too many here that are much good, $250 for an SKS? no thanks.

Also the guy selling the top rail for the SKS for $125, claiming he designed and has one of the only ones, guy kinda got moody when we said it was too much then we found basically the exact same thing on sale online for $30 :/

[Zedbra]

Yeah, I think we could work out a trade. I'm out of town for business right now, let's organize something when I get back. I'll be in Whistler that first week of May for a conference, then the Rat Race on the weekend.

[originalhypa]

that gun show was kind of a joke, but i guess there arent too many here that are much good, $250 for an SKS? no thanks.


I think it's a matter of taking what we can get right now, in the hopes that more vendors will support the show next year. I'm happy with my purchases there.

Sun led mounted to my 1911 plinker.
http://img.photobucket.com/albums/v253/hypasteve/IMAG0204_zpssu5oymwu.jpg

The light is bright as hell. I did some late night testing in the dark, and it lit up my back yard without any issues. The laser was visible at over 100 meters too, which is just damn fantastic.
http://img.photobucket.com/albums/v253/hypasteve/IMAG0206_zps9c5cgk8h.jpg


penalized Zack Kassian is pleased.
http://img.photobucket.com/albums/v253/hypasteve/kassianclap_zpsgukcurjy.gif


Yeah, I think we could work out a trade. I'm out of town for business right now, let's organize something when I get back. I'll be in Whistler that first week of May for a conference, then the Rat Race on the weekend.

awesome!
My back is in good shape right these days, so we'll be spending a lot of time in Whistler.

[Hondaracer]

Are there any legality issues with hanging guns on the wall?

I plan to buy two of these AR style .22's and hang em in my office, live in an apartment. Don't see how it's much different than most people's storage lol, espeixLly if I pull the firing pins out

[Zedbra]

Are there any legality issues with hanging guns on the wall?

I plan to buy two of these AR style .22's and hang em in my office, live in an apartment. Don't see how it's much different than most people's storage lol, espeixLly if I pull the firing pins out

Non restricted - You can hang them on the wall if they are locked and ammunition is not close by.

Restricted - attach a lock and then they must be fastened to the wall. Lots of people drill right through the back of a combination trigger lock to fasten it to the wall.

Storing, Transporting and Displaying Firearms - Royal Canadian Mounted Police (http://www.rcmp-grc.gc.ca/cfp-pcaf/fs-fd/storage-entreposage-eng.htm)

[blkgsr]

anyone still going shooting up sylvester roard to stave?

[stewie]

anyone still going shooting up sylvester roard to stave?

for those who are considering going there, don't waste your time going there.

i was up there a few months ago for a drive with friends and there's giant "no shooting" signs up from the rcmp stating that if caught shooting, you'll be fined, and have your firearms seized. its not worth the risk as while on our drive we drove past 2 rcmp suv's while there

although its a mission bylaw - once your past the 14/16km mark, you're outside of the district of mission. theres a spot where its full of cut down trees, that ton of people shoot from. I've seen the rcmp there driving around, but can they do anything at that point? (ps - i dont and havn't shot there in a looooooooooooooooooooooooooooooooooooong time so im unaware of how that works. i stick to the range as its easier and cheaper on gas :D )

[blkgsr]

ended up going to squamish and up one of the FSR's

view was much better anyways

[originalhypa]

So I sold my sti the other day, and I've been looking at spending some of that cash on a new gat. There have been a couple that have caught my eye in the last little while.

The kriss vector is just so space age and futuristic. Plus it's a .45 that uses glock mags (iirc). Cost isn't too bad, about as much as a basic ar. But the vector would be non restricted.

a wheel gun. I've always liked the Smith&Wesson short barrel 38 special. 357 can also be used. Cost is less than a grand for a nice stainless 7 shot. Plus it's a S&W, the penultimate wheel gun.

Chiappa rhino.
its a beast, but it's chiappa so you don't know what you're going to get. It shoots 357, and cost I'd just over a grand.


I bought the lower hand guard for my t97 last night. It's still about 7 weeks away, but once it gets here I'm hoping the t97 becomes my perfect rifle. I'll keep you ask updated on that.
:D

[Zedbra]

I love my wheel guns - I picked up another Dan Wesson 15-2 with supposedly less than 50 rounds and I'd believe it because when I took it apart there was no wear, no dirt, and the 8" and 6" barrel have never been fired.

I don't know if you ever plan on competing - even just Club shoots, often only allow 6 shots. The 7 shot S&W needs specific speed loaders etc. I never read a lot about their backstrap strengths, as that was a concern on some of the S&W models for years.

The twins:

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/2015-05-03%2009.39.47_zpsytcgsbt7.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/2015-05-03%2009.39.47_zpsytcgsbt7.jpg.html)

Not even dirty inside:

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/2015-05-03%2010.17.33_zpsfh6fmkpb.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/2015-05-03%2010.17.33_zpsfh6fmkpb.jpg.html)

[Eternal_SiR]

So I sold my sti the other day, and I've been looking at spending some of that cash on a new gat. There have been a couple that have caught my eye in the last little while.

The kriss vector is just so space age and futuristic. Plus it's a .45 that uses glock mags (iirc). Cost isn't too bad, about as much as a basic ar. But the vector would be non restricted.

a wheel gun. I've always liked the Smith&Wesson short barrel 38 special. 357 can also be used. Cost is less than a grand for a nice stainless 7 shot. Plus it's a S&W, the penultimate wheel gun.

Chiappa rhino.
its a beast, but it's chiappa so you don't know what you're going to get. It shoots 357, and cost I'd just over a grand.


I bought the lower hand guard for my t97 last night. It's still about 7 weeks away, but once it gets here I'm hoping the t97 becomes my perfect rifle. I'll keep you ask updated on that.
:D

you got the LHG? thats on presale already? Damn i must have missed it. But then again, i'm looking at buying a new house so every penny saved counts.. damn having to be responsible

[originalhypa]

I love my wheel guns -

Hey, me too!
:D

I snagged this today when a heck of a salesman showed me this.

http://img.photobucket.com/albums/v253/hypasteve/IMAG0269_zps2blhhoxs.jpg

Now Im waiting on the govt paperwork. Then time to pepper some steel!
:fuckyea:


you got the LHG? thats on presale already? Damn i must have missed it. But then again, i'm looking at buying a new house so every penny saved counts.. damn having to be responsible

The email came to me the other day. I instantly jumped on paypal and snagged it. So with the LHG and S&W above, I have spent my gun money (guney?), but I have a lot to show for it.

Dont fret, the house always comes first. Think of it as a good place to store your guns.
:lol

[Zedbra]

I've been reloading .38 and .357 so my wheels are spinning freely now. I love'm, going to stick with'm for years, I have no interest in a semi to be honest.

[originalhypa]

Nice! I like to hear good experiences coming from reloading. The thought of doing some custom loads for both .357 and 38 special is very exciting.

On that note, We had some ftf issues with my brother's 9mm reloads. The double action of the Jericho made it lot better. I could double or at times triple strike to fire the round.

Semi auto are fun. I love my IWI, and my 1911, but cowboys use revolvers.

Pew pew.

[originalhypa]

Ps: if you're interested in the lhg, I'd be happy to forward you the for sale link.

[4.7Rider]

can anyone recommend a good first shotgun to get? Obvs gonna be a 12g and barrel length isnt a big deal either.

[T4RAWR]

Benelli supernova If you plan on shooting as is.

Buy once cry once lol.

If you wanna "trick out" your shotgun a mossberg 590 or remington 870 is a good way to go.

I own a benelli supernova so i may be a bit biased :)

[blkgsr]

anyone have any interest in a Robinson Arms XCR in 223 with an Aimpoint Pro red dot?

runs flawless

[Phil@rise]

for those who are considering going there, don't waste your time going there.

i was up there a few months ago for a drive with friends and there's giant "no shooting" signs up from the rcmp stating that if caught shooting, you'll be fined, and have your firearms seized. its not worth the risk as while on our drive we drove past 2 rcmp suv's while there

although its a mission bylaw - once your past the 14/16km mark, you're outside of the district of mission. theres a spot where its full of cut down trees, that ton of people shoot from. I've seen the rcmp there driving around, but can they do anything at that point? (ps - i dont and havn't shot there in a looooooooooooooooooooooooooooooooooooong time so im unaware of how that works. i stick to the range as its easier and cheaper on gas :D )
about time!

[originalhypa]

Benelli supernova If you plan on shooting as is.

Buy once cry once lol.

good advice. The Benelli is a nice piece of machinery. I love the tactical version of it.

http://i279.photobucket.com/albums/kk150/df662/IMG_7297_zps92fd1178.jpg


If you wanna "trick out" your shotgun a mossberg 590 or remington 870 is a good way to go.

I love my 870. It is a simple design, and a proven shotgun. Ive tarted mine up with some tactical bits (are we seeing a pattern here? lol) and the only complaint I have is that the slide release on the 870 is hard to reach when using a pistol grip. If I was starting over again, I would get the Mossberg over the 870.

[Zedbra]

My Registration showed up and I happened to only work half a day today, so off to the range I went to test out my new 15-2 and compare it with my current 15-2. Well, it certainly is a nice shooter. The single action trigger is almost too light - I'll have to get used to that. I needed to adjust the sights as it was shooting low left initially but then I finally got it going where I thought I was pointing it. ;)



Anyways, here are some pics from the range all shot with my new pistol and an 8" VH barrel/shroud. Targets were set up 13 metres (40 feet) from the shooting line. The lines on the square targets are 1" squares.

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/20150508_120536_zpsddok2dvf.jpg



http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/20150508_122604_zps5h4goqdx.jpg



http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/20150508_122729_zpsfp0kvqvg.jpg



http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/20150508_125347_zpsd2lkpdc6.jpg



This is one group from my older 15-2, also sporting an 8" VH barrel/shroud:



http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/20150508_123529_zpscuxvbn4w.jpg

[4.7Rider]

I have herd really good things about the rem 870 im gonna go and take a look at one soon

[originalhypa]

Be sure to check out the Mossberg too.Like I said, the 870 is great. But it has it's failures. Aside from the slide release its a bitch to get parts for too. I've been waiting months on a slide and castle nut. It's hard to get parts in Canada.


Zed, great shooting man!
Remind me to never bet beers based on our pistol shooting.
:lol

[Zedbra]

Be sure to check out the Mossberg too.Like I said, the 870 is great. But it has it's failures. Aside from the slide release its a bitch to get parts for too. I've been waiting months on a slide and castle nut. It's hard to get parts in Canada.


Zed, great shooting man!
Remind me to never bet beers based on our pistol shooting.
:lol

I have heard a lot of good feedback on the Weatherby SA-08 as well. If I needed a new shotgun for steel shot, it would be on my hit list for sure.

I shoot revolvers - not pistols. ;) Loving the wheels - I need to do some more reloading this weekend.

[originalhypa]

Look who became a gun snob. Mr. Revolver :lol

Just playing man.
shoot like that and you have my attention.

I picked up my 686 yesterday. Now I'm waiting for Miramichi to send my registration. I hope it shoots as good as it looks.

[Zedbra]

I would love to try your 686 and compare it to my Dan Wessons sometimes. It could be bad for one of us, wanting to pick up another one from another brand. hehe

You still want to trade the scope/red dot? I'm interested in that still.

[originalhypa]

Lets do it.
I would like to shoot the 10/22 again. Without an optic it's out of commission.

[winson604]

Finally getting into the game since getting my license a couple years ago. A complete noob but I'll learn.

Just purchased a rifle online so I guess I need to get a case for storage asap.

Few questions for starters.

Recommendations for rifle cases for storage/transport, I guess it'll be the same case. Specifically an AR 15 type rifle. Not looking to break the bank but willing to go up to $100. Quick search on Youtube seem to rave about the Pelican.

Recommendations on where to buy ammo, accessories, etc either online or local?

Any other starter pointers appreciated.

[Zedbra]

Well, you won't find a Pelican case for an AR remotely close to $100. With that budget, I would look at Wholesale Sports for variety. Some local shops may have a few hard cases to fit. I only use my hard cases when I go hunting, otherwise I just use a soft case the rest of the year while going to the range.

You can ask incubus here what they carry for AR accessories, I love going to his shop - International Shooting Supplies in Surrey. In Vancouver, I go to Italian Sporting Goods. Also, CanadaAmmo has some good deals on bulk ammo from time to time.

Have fun shooting.

[Eternal_SiR]

anyone have any interest in a Robinson Arms XCR in 223 with an Aimpoint Pro red dot?

runs flawless

what are you asking? Thinking about getting rid of my T97 with FTU and my AR15 to fund the XCR.

[CRS]

Rifle cases:
http://www.amazon.ca/s/ref=nb_sb_noss_2?url=search-alias%3Daps&field-keywords=rifle%20case

I have a couple of the Plano ones with custom fitting foam. They've been great but again with the increase protection, you have an increased weight.

[originalhypa]

what are you asking? Thinking about getting rid of my T97 with FTU and my AR15 to fund the XCR.

Now that is a trade I could get behind.
The XCR is what you get when you mate an AK and an AR. Probably the best non-restricted rifle option out there.

very nice!
:fuckyea:

I have a couple of the Plano ones with custom fitting foam. They've been great but again with the increase protection, you have an increased weight.

I have a couple of plano bags too, and they work well. For the bullpup, I needed to go with a tactical bag. It was the only option that had the height to cover my T97 and optic.

[blkgsr]

what are you asking? Thinking about getting rid of my T97 with FTU and my AR15 to fund the XCR.

pm sent

[blkgsr]

Now that is a trade I could get behind.
The XCR is what you get when you mate an AK and an AR. Probably the best non-restricted rifle option out there.

very nice!
:fuckyea:



ya i like the fact you can easily swap barrels for different calibers for much less than the price of a new gun

[winson604]

Rifle cases:
http://www.amazon.ca/s/ref=nb_sb_noss_2?url=search-alias%3Daps&field-keywords=rifle%20case

I have a couple of the Plano ones with custom fitting foam. They've been great but again with the increase protection, you have an increased weight.

Yea, looking at Plano right now as a good option for price. How do most of you guys store your restricted rifles? Throw them in one of these cases, lock them, and throw them in the closet? I know the "rules" but just curious how far some of you go to secure it.

I'll probably just throw it in a case, lock gun and case, and throw under the bed or in closet somewhere.

[ODStryker00]

I keep my restricted firearms in a 14 gun safe. I suggest planning ahead and think about if there may be a chance you will possibly buy more firearms in the future. If you think this might me possible, mind as well buy a rifle safe/cabinet to keep your all firearms safe and organized.

For myself, I like to buy "higher-end" firearms and parts. I feel if you are going to put all that money into firearms, scopes, red dots, etc., mind as well spend a little extra money to protect everything. It doesn't make sense to store your valuables in a case where someone can easily pick it up and take out of your house. For myself, a firearm cabinet does not even cut it. A safe that is bolted to the ground is the only way to go if you have thousands of dollars put into your firearms. A safe is not something you buy, it's something you invest in.

Also. keep in mind that soft cases and foam (inside hard cases) also hold moisture and may not be the best for your firearms. That is why I always take them out of the case and put them back in the safe immediately after getting home from the range.

[Zedbra]

I keep my restricted firearms in a 14 gun safe. I suggest planning ahead and think about if there may be a chance you will possibly buy more firearms in the future. If you think this might me possible, mind as well buy a rifle safe/cabinet to keep your all firearms safe and organized.

For myself, I like to buy "higher-end" firearms and parts. I feel if you are going to put all that money into firearms, scopes, red dots, etc., mind as well spend a little extra money to protect everything. It doesn't make sense to store your valuables in a case where someone can easily pick it up and take out of your house. For myself, a firearm cabinet does not even cut it. A safe that is bolted to the ground is the only way to go if you have thousands of dollars put into your firearms. A safe is not something you buy, it's something you invest in.

Also. keep in mind that soft cases and foam (inside hard cases) also hold moisture and may not be the best for your firearms. That is why I always take them out of the case and put them back in the safe immediately after getting home from the range.

This is all good advice. Get a safe - don't store your guns in cases due to moisture causing premature wear over the years.

[winson604]

I keep my restricted firearms in a 14 gun safe. I suggest planning ahead and think about if there may be a chance you will possibly buy more firearms in the future. If you think this might me possible, mind as well buy a rifle safe/cabinet to keep your all firearms safe and organized.

For myself, I like to buy "higher-end" firearms and parts. I feel if you are going to put all that money into firearms, scopes, red dots, etc., mind as well spend a little extra money to protect everything. It doesn't make sense to store your valuables in a case where someone can easily pick it up and take out of your house. For myself, a firearm cabinet does not even cut it. A safe that is bolted to the ground is the only way to go if you have thousands of dollars put into your firearms. A safe is not something you buy, it's something you invest in.

Also. keep in mind that soft cases and foam (inside hard cases) also hold moisture and may not be the best for your firearms. That is why I always take them out of the case and put them back in the safe immediately after getting home from the range.

Fair and valid points but I won't be going that far in terms of a safe for now. I have no idea how serious I'll be with this hobby right now and with a new baby, saving for a down payment I can't justify going crazy. That's why I went a budget economical route with a Norinco CQ-A as well to test the waters. No need spending $1k on a gun before other parts, case, etc etc only to find out meh not for me.

But if one day I get serious, definitely the full safe bolted to the ground and wall type deal.

[originalhypa]

I don't mind a cabinet for storing ammo. But what I would really like to do is build a gun room/safe room. to me, that would be the absolute best option.

There are some really cool safes out there though. I spotted one in the US that mounts under your bed. It's a horizontal unit with a quick keyed lock. I don't trust biometric as the good stuff is really expensive. Nothing beats a good 4 button code for quick access.

[alwayslive]

After I get my firearm licence, am I allowed to just buy whatever gun I want? Are there cross-boarder restrictions so should I just keep the purchases within Canada? Also, what are the regulations in terms of having the gun on you? Are you allowed to conceal-carry or is it just more for storing at home and shooting in more isolated areas? Sorry if this is the wrong thread to post this!

Posted this here because I want to become a recreational shooter, just need more information first

[CRS]

After I get my firearm licence, am I allowed to just buy whatever gun I want? Are there cross-boarder restrictions so should I just keep the purchases within Canada? Also, what are the regulations in terms of having the gun on you? Are you allowed to conceal-carry or is it just more for storing at home and shooting in more isolated areas? Sorry if this is the wrong thread to post this!

Posted this here because I want to become a recreational shooter, just need more information first

Have you visited the RCMP site for these questions? It has boat loads of good information on there.

To answer your questions:
1. After you get your license (assuming you get both your PAL and RPAL), you can buy both restricted and non-restricted guns. You cannot buy prohibited guns.

2. Yes. Importing guns is a pain and is best left to the professionals. If you really want to, there are companies that can do this for you. Note that it is dangerous territory to buy gun parts (scopes, stocks, whatever) in the states and trying to bring them back up. Depending on what it is, it might be a criminal act (both in Canada and in the US).

3. Read RCMP website about transportation.

4. No. Well. Maybe. Mainly No. Unless your job specifically requires it, you will never get a conceal to carry permit.

Again, have a read at the RCMP website about firearms. Everyone should read it and familiarize yourself with it.

[Eternal_SiR]

I have the plano double scoped rifle case. It was awsome for the price, i think i bought it in the US for about $140CAD after exchange. Its not a pelican by any case but for that price it was great. Hard foam and the case latches has built in locks so that was a bonus. It does weight a bit empty so once loaded, it does weight a bit. I wouldn't hesitate to buy another one, i do already have 5 pelican cases.

[Eternal_SiR]

I keep my restricted firearms in a 14 gun safe. I suggest planning ahead and think about if there may be a chance you will possibly buy more firearms in the future. If you think this might me possible, mind as well buy a rifle safe/cabinet to keep your all firearms safe and organized.

For myself, I like to buy "higher-end" firearms and parts. I feel if you are going to put all that money into firearms, scopes, red dots, etc., mind as well spend a little extra money to protect everything. It doesn't make sense to store your valuables in a case where someone can easily pick it up and take out of your house. For myself, a firearm cabinet does not even cut it. A safe that is bolted to the ground is the only way to go if you have thousands of dollars put into your firearms. A safe is not something you buy, it's something you invest in.

Also. keep in mind that soft cases and foam (inside hard cases) also hold moisture and may not be the best for your firearms. That is why I always take them out of the case and put them back in the safe immediately after getting home from the range.

agreed. Get a good safe to protect your investment. Despite mine is not bolted down to the floor the thing weights like 500lbs empty. So when loaded with firearms and ammo, i give credit to whoever can move it.

One thing i hate is they advertize as a 14 gun safe but it really doesn't fit 14 very nicely. More like 10 if yours lucky. Bought a large safe thinking i'll never go above it but now its packed like tetris inside and have other in cases because they don't fit anymore.. I need to build a gun room.

[originalhypa]

One thing i hate is they advertize as a 14 gun safe but it really doesn't fit 14 very nicely. More like 10 if yours lucky.

I swear by these.

for the handguns.
http://www.thealaskalife.com/wp-content/uploads/2012/07/Gun-Storage-Rifle-Rod-Handgun-Hanger-8.jpg

and for the rifles.
http://www.thealaskalife.com/wp-content/uploads/2012/07/Gun-Storage-Rifle-Rod-Handgun-Hanger-11.jpg

(thanks to Gun-Safe Storage Solutions - The Alaska Life (http://www.thealaskalife.com/guns/gun-safe-storage-solutions/) for the pics and write up)

I use these in my safe, and bought a bunch as gifts for my gun friends at Christmas. They open up a ton of space, plus the handguns look sick hanging off the end.

Gun Safe Accessories - gun racks for gun safes organize maximize space ? Gun Storage Solutions (http://www.storemoreguns.com/collections/gun-safe-accessories)

[Eternal_SiR]

yweah.. i use those for my handguns when i had a few, now i sold them and left with only 1 now. I've seent hose gun rods, been looking at them for a while.. its the damn large scopes that get in the way.. lol. Looking to sell my townhouse to move into a house, so i, just waiting to see how things pan out and maybe have a designated gun room

[ODStryker00]

One thing i hate is they advertize as a 14 gun safe but it really doesn't fit 14 very nicely. More like 10 if yours lucky. Bought a large safe thinking i'll never go above it but now its packed like tetris inside and have other in cases because they don't fit anymore.. I need to build a gun room.

A general rule is to buy a cabinet/safe that is advertised to hold double the amount of guns you have. I have a 14 gun safe but only actually only own 5. I think down the road I'm realistically only going to buy one more. There's no way a 14 gun safe will actually hold 14 guns. Maybe if they are skinny guns with no scope/red dot. An optic on a gun can easily take up 2-3 spots of a regular rifle with without any optics.

When I initially only had a couple of rifles, I bought a stack-on 10-gun cabinet, kept everything in there and used my ammo to "secure" the cabinet in place. Like some other people, now that I've upgraded to a larger safe, I've upgraded the cabinet to hold my ammunition. A 10 gun cabinet surprisingly holds a lot of ammo.

[Eternal_SiR]

yeah.. i picked up a 16 gun safe... i think i maybe have 10 in there right now.. and thats playing tetris with them, luckly one has a folding stock and one is a bullpup so they are short and i can slip them in around the bottom of the safe. I'd like to get a bigger safe.. i keep some ammo in the safe, but most are in ammo cans under my work bench.

[incubus]

Canada does not mind as long as you have a license (pal) you can bring it back.

The problem is US has ITAR regulations, cant export anything out of us without proper papers and etc.

Now importing guns, as long as it isnt prohib(full auto,converted auto etc etc) and over the minimum barrel length for pistols (105mm) it can be done for the right price

irunguns offeres this service and have a office in Alberta.

[CRS]

Deal is so hot

https://www.canadaammo.com/product/detail/dominion-arms-single-barrel-shotgun-16-gauge/

[Zedbra]

Deal is so hot

https://www.canadaammo.com/product/detail/dominion-arms-single-barrel-shotgun-16-gauge/

but wth are you going to do with a single shot 16g? It's not a terrible gauge for ducks, but you want a pump 'cuz you're gonna miss sometime. I have a hard enough time finding the shot sizes I want with my 20g - which is highest I'd like to go for my bird shooting.

I saw Canadaammmo is also floggin their Norc 1911s for cheap this weekend.

[eclipseman]

I think I remember the backpacker being $50 during christmas time. Could be wrong, but yeah, not much to do with a single shot. :)

[Zedbra]

I think I remember the backpacker being $50 during christmas time. Could be wrong, but yeah, not much to do with a single shot. :)

They kick like a mule, too. My friend shot two rounds of trap with a 12g single shot and his shoulder was purple afterwards. I'll stick with my semi shotguns

[CRS]

:lol

I'm not saying it won't kill you but at $80, why not just hoard one?

[Zedbra]

Took the day off, did some chores and then got into a groove on the reloading press. Popped out 300 rounds of .357 in various grain loads with full jacketed bullets and also popped out 200 rounds of .38 SPL with wadcutters. When my thumb heels (I chopped off the tip of it 3 weeks ago with an axe) I am hitting the range with my wheel guns - hard.

[Eternal_SiR]

what everyones gear setup? We all we have guns, what about gear?

[Hondaracer]

Took the day off, did some chores and then got into a groove on the reloading press. Popped out 300 rounds of .357 in various grain loads with full jacketed bullets and also popped out 200 rounds of .38 SPL with wadcutters. When my thumb heels (I chopped off the tip of it 3 weeks ago with an axe) I am hitting the range with my wheel guns - hard.

how long?

[Zedbra]

how long?

Til I have 100 rounds left. :awwyeah:

[Eternal_SiR]

renovating the house so alot of stuff packed away but found an older pic. just my vest and AR. all mag pouches are all loaded in the safe. Boots and camo in the closet. Have full set of ACu, CADPAT, woodlands

http://i833.photobucket.com/albums/zz260/Eternal_SiR/20150221_102249_zps3drewczi.jpg (http://s833.photobucket.com/user/Eternal_SiR/media/20150221_102249_zps3drewczi.jpg.html)

[Zedbra]

I had a gun dream/nightmare last night. In the dream, for some reason I bought a Glock in .357 SIG and I was disappointed in the gun's performance but more disappointed in myself for actually buying that calibre; thinking how much I am going to lose trying to sell it, who would want that calibre, good luck trying to trade it. Made me chuckle when I woke up.

[Eternal_SiR]

hahah nice.. i've had a few of those before.. one time i had one where in my dream i woke up and all my guns were gone.. i freaked out... then when i actually woke up i ran to the gun safe to check.

[Hondaracer]

pulled the pin on the ISSC MK22 today, bought it used off CGN for $500 with everything seen, pretty good deal considering the mags are $50 a pop. This is a first gen which had some problems with pins backing themselves out, previous owner installed the fix kit from ISSC himself so hopefully it's all good. Should be able to get it out next weekend

http://i4.photobucket.com/albums/y136/sniperslayer/D94F8565-81E4-4F5F-A7D9-5B84F699059C_zpsjaip19ib.jpg~original

[Eternal_SiR]

pulled the pin on the ISSC MK22 today, bought it used off CGN for $500 with everything seen, pretty good deal considering the mags are $50 a pop. This is a first gen which had some problems with pins backing themselves out, previous owner installed the fix kit from ISSC himself so hopefully it's all good. Should be able to get it out next weekend

http://i4.photobucket.com/albums/y136/sniperslayer/D94F8565-81E4-4F5F-A7D9-5B84F699059C_zpsjaip19ib.jpg~original

thats a really good buy.. for 500 thats not bad at all

[Zedbra]

I'm not into the whole black rifle look, but that is a nice looking plinker.

Today I tumbled over 500 rounds of .357 and .38 SPL. I always admire how shiny they are when they are first cleaned. It instantly makes me want to go out shooting.

[originalhypa]

The MK22 is the ultimate tactical style rimfire rifle. It's well worth the $500, especially with the extra mags. My shooting buddy has one, and it's a ton of fun to plink with.

Zed, you're speaking the truth about shiny ammo. I still haven't shot my S&W yet. But after popping into Int'l the other day and buying ammo, I think I'm going to hit the range later today.

It's a good day to shoot.

[Zedbra]

^ wheel gun fever commencing in 3....2.....1.....

You wanna do the scope swap this week?

[originalhypa]

Let's do it! I'll be local all weekend for my youngin's b'day party.
Do you have my cel number?


On a side note;
It's a good thing I checked the calendar for the Abby gun range. It looks like they rented range 2 out AGAIN. It's supposed to be a member's range, yet they continue to rent it out during the week. Looks like I'll be going to the General Meeting on thursday to announce my displeasure in person.

Here is what I saw on the calendar today.

Range one (indoor) - closed
Range two (120 yard) - rented
Range three (55 yard) - rented
Range 4 (20 yard) - open

What a joke.

[originalhypa]

So I hit up the range yesterday with some new toys.

http://img.photobucket.com/albums/v253/hypasteve/7b69dd65-2eb2-4366-93d1-1b125e07f8c4_zpsh0aeube2.jpg


The 686 is a nice, simple gun. The .357 kicks hard as hell, but the 38 special felt almost like a 9mm. The 686 is heavy, so it took a lot of the force away. But my left hand was a little singed after pumping almost 100 shots through it. I love wheel guns!

Another fellow showed up with a 30-06 and he was booming away. I thought "why do you get all the attention?". That was the right time for me to bust out the 45/70 lever. Again, it's a simple gun with mechanical action. I really enjoyed shooting it, and would have blown off a lot more than the 10 or so that I shot. If the rounds were $3 each...

The T97 was flawless, as always. I'm waiting on the lower hand guard for it, and it's done. The T97 has to be one of my favorite guns to shoot. Too bad I shot the bolt holding my steel target up in the first 20 shots. So much for that!
:lol

I had a good time out there shooting the new toys. I need to get my reloads started so I can target these in without breaking the bank.

http://img.photobucket.com/albums/v253/hypasteve/IMAG0298_zpsfn1nyhtc.jpg

[Eternal_SiR]

so jealous of you. I haven't been shooting in over a year. Stupid health problems. I have around 4 guns that i have yet to shoot. *sigh* do depressing. The range in langley is opening up soon so hopefully on a good day i'll be able to hit it up. But damn, can't imagine the boom when they are ripping off 50 BMG inside

[Hondaracer]

ive been in car accidents far worse than shooting the .50 inside Battlefield vegas. was kind of surprised the langley range has it but it's really the only interesting gun they have for rent. Since the barrett works the way it does releasing pressure through the gas ports shooting it inside those little boxes knocks the breathe out of you

1JUpMDyRKP

might as well the throw in the M60 as well

1JTpbByRIE

i wanted a bigger caliber than the M249 so went with the .308 M60. However, after shooting it the guy informed me that there was a newer variation of the SAW which now shoots .308, so probably would have preferred that

[originalhypa]

so jealous of you. I haven't been shooting in over a year. Stupid health problems. I have around 4 guns that i have yet to shoot. *sigh* do depressing. The range in langley is opening up soon so hopefully on a good day i'll be able to hit it up. But damn, can't imagine the boom when they are ripping off 50 BMG inside

Hopefully soon they will fix you.
And when they do we can hit up the new range. It's just down the road from my work, so I couldn't avoid signing up for a membership. No payment until they open, although that should be coming soon.

Members only mondays are going to be a lot of fun.
:fuckyea:

i wanted a bigger caliber than the M249 so went with the .308 M60. However, after shooting it the guy informed me that there was a newer variation of the SAW which now shoots .308, so probably would have preferred that

So very cool.
I love the M60, butI like that the M249 can be shot from the shoulder. It's always been more of a soldier's gun, and less of a cannon that needs to be bolted down like the larger variant.

[incubus]

ill just leave this gem here

June 19th & 20th Anniversary Sale Fliers (http://www.canadiangunnutz.com/forum/showthread.php/1249333-June-19th-amp-20th-Anniversary-Sale-Fliers)

hope everyone is enjoying the weather, finally got out shooting sunday

[originalhypa]

I was trying to get my brother out to shoot today, but no dice. So thursday will be our day.
I grabbed the Dusk and Dawn from zedbra, and just happened to have the rails and rings that fit already. I laser sighted it at about 30 yards, but it will be good to get it out to the range and set up at 100 yards.

I miss plinking with it so much.
:D




Attn: Incubus.
I meant to send this to you last week, but part # 28 is what I need. I grabbed part # 29 from you last week, so I am good there. But the slide is what I need.
http://sjhardware.com/store/modules/catalog/images/Remington_870_parts_schematic.jpg


and also a castle nut tool.
http://ecx.images-amazon.com/images/I/31MVi2qSX0L.jpg

although someone was telling me that part # 57 works as a tool. I will have to check that out.

[Zedbra]

I reloaded a few hundred .357 rounds and about 50 .38SPL rounds, trying out some different loads/bullet weights. I primed some of my 7mm MAG cases and was about to start loading those for the first time, but I decided to read up a bit more on various loads/bullets first.

[Zedbra]

I'm taking Friday off and I am going to the range starting at 10:00am. I need a break from this busy thing called life. If anyone wants to drive to Squish and join me, that would be cool. I can sign in two guests at a time, $10 for daily insurance each.

incubus is going to be busy - that I already know. ;)

[originalhypa]

No driving to Squamdot, but I am taking a rookie out to Abby today.
My goalie buddy has never shot a gun in his life. I heard that, mentioned that it was like being in San Diego and telling your buddies you're a virgin. It's off to Tijuana!!!!!
OR Abby gun range. It's closer, lol.

I'm bringing out the T97, the 10-22, 357, and the 1911-22. I am debating on grabbing the 870 shotgun. It's between sights right now. I'll probably go home and grab it on the way.

Also, I found some CCI rimfire yesterday in my travels. I won't actually come out and give up my supplier, but I can say the store rhymes with Banadian Gire.

Keep it on the downlow.
;)

[CRS]

So this is kind of nice.

BILL C-42 PASSING THIRD READING TODAY, ROYAL ASSENT EXPECTED THURSDAY, JUNE 18 ? ATT CLARIFICATION UPDATE | Calibremag.ca (http://calibremag.ca/home/2015/06/bill-c-42-passing-third-reading-today-royal-assent-expected-thursday-june-18/)

[winson604]

So what are some of the closest but decent ranges you guys go to that permits AR-15's etc. Only just realized now that I won't be able to bring mine to DVC which would have been the closest for me (I'm in Van).

[evlee]

So what are some of the closest but decent ranges you guys go to that permits AR-15's etc. Only just realized now that I won't be able to bring mine to DVC which would have been the closest for me (I'm in Van).

Port Coquitlam Hunting and Fishing Club is just 5-10 mins away

[CRS]

So what are some of the closest but decent ranges you guys go to that permits AR-15's etc. Only just realized now that I won't be able to bring mine to DVC which would have been the closest for me (I'm in Van).

Port Coquitlam Hunting and Fishing Club is just 5-10 mins away

This.

Once you go PCDHFC, you'll never go back to DVC.

[Hondaracer]

any recomendations for a little 3X tactical type scope for my MK22? basically somthing to shoot grouse at 20-70 yards?

[Zedbra]

any recomendations for a little 3X tactical type scope for my MK22? basically somthing to shoot grouse at 20-70 yards?

I guess you aren't planning on eating much of that grouse, eh? ;)

[winson604]

This.

Once you go PCDHFC, you'll never go back to DVC.

Here's probably a stupid question but for any of these ranges, I have to sign up as a member in order to go right? No such thing as just go here and there and pay drop in fees?

[evlee]

this is for PCDHFC

Club Operating Hours:

8:30am - 4:30pm Monday - Sunday
Closed on Tuesdays.
Last shots fired 4:00pm gates closed 4:30pm sharp.

The administration office is closed Tuesday & Wednesday

RANGE OPERATING HOURS
EFFECTIVE MAY 1, 2015

Monday - 8:30am - 4:30pm
Tuesday - CLOSED
Wednesday - 8:30am - 4:30pm
Thursday - 8:30am - 4:30pm
Friday - 8:30am - 4:30pm
Saturday - 8:30am - 4:30pm
Sunday - 8:30am - 4:30pm
(Ranges are open statutory holidays except Christmas Day, Boxing Day, and New Years Day)

Public drop-in 11:30am to 4:30pm
Day cards available for public drop-in
from 11:30am.

4 PLEASE NOTE:
MEMBERS ONLY have access to the ranges from 8:30am - 11:30am daily

Club members may continue to bring guests for members only hours, providing guests share members shooting bench.

CLUB ADMINISTRATION OFFICE HOURS:
Monday - 8:30am - 4:00pm
Tuesday - CLOSED
Wednesday - CLOSED
Thursday - 8:30am - 4:00pm
Friday - 8:30am - 4:00pm
Saturday - 8:30am - 4:00pm
Sunday - 8:30am - 4:00pm
Closed for lunch 12:30pm-1:00pm

4 PLEASE NOTE:
Eye Protection, Hearing Protection and Staplers are not provided by PCDHFC. Please bring your own.

Eye & Hearing protection are available for sale on range 7.

[winson604]

this is for PCDHFC

Club Operating Hours:

8:30am - 4:30pm Monday - Sunday
Closed on Tuesdays.
Last shots fired 4:00pm gates closed 4:30pm sharp.

The administration office is closed Tuesday & Wednesday

RANGE OPERATING HOURS
EFFECTIVE MAY 1, 2015

Monday - 8:30am - 4:30pm
Tuesday - CLOSED
Wednesday - 8:30am - 4:30pm
Thursday - 8:30am - 4:30pm
Friday - 8:30am - 4:30pm
Saturday - 8:30am - 4:30pm
Sunday - 8:30am - 4:30pm
(Ranges are open statutory holidays except Christmas Day, Boxing Day, and New Years Day)

Public drop-in 11:30am to 4:30pm
Day cards available for public drop-in
from 11:30am.

4 PLEASE NOTE:
MEMBERS ONLY have access to the ranges from 8:30am - 11:30am daily

Club members may continue to bring guests for members only hours, providing guests share members shooting bench.

CLUB ADMINISTRATION OFFICE HOURS:
Monday - 8:30am - 4:00pm
Tuesday - CLOSED
Wednesday - CLOSED
Thursday - 8:30am - 4:00pm
Friday - 8:30am - 4:00pm
Saturday - 8:30am - 4:00pm
Sunday - 8:30am - 4:00pm
Closed for lunch 12:30pm-1:00pm

4 PLEASE NOTE:
Eye Protection, Hearing Protection and Staplers are not provided by PCDHFC. Please bring your own.

Eye & Hearing protection are available for sale on range 7.

Ahh thanks, blind there reading all the info.

Any recommendations on eye and hearing protection? Man the cost for shooting keeps adding up and I haven't even taken a shot yet lol

[CRS]

Ahh thanks, blind there reading all the info.

Any recommendations on eye and hearing protection? Man the cost for shooting keeps adding up and I haven't even taken a shot yet lol

I personally have a Howard Leight Impact Sport and it's a great all around electronic earmuff.

http://www.amazon.ca/Howard-Leight-R-01526-Electronic-Earmuff/dp/B001T7QJ9O

As for eye protection, there are lots around. I don't have any particular recommendations since I'm using a generic brand I found on amazon.

[Zedbra]

Any recommendations on eye and hearing protection? Man the cost for shooting keeps adding up and I haven't even taken a shot yet lol


I was not able to find glasses that fit my children that would fit under their muffs comfortably. I was recommended to try the ESS Suppressor as they have super thin plastic ear pieces that work great under muffs. The guy that recommended these flies Apache helicopters and he swears these are the only glasses he can wear for several hours without issues under his ear muffs/headphones.

I now wear them all the time, they are very comfortable and do not break the bead on the muffs.

http://www.esseyepro.com/uploads/products/products_193_large.jpg

[winson604]

Thanks boys!

[ODStryker00]

I use Smith Optics Aegis Echo. Although these glasses are a little pricey, they are actually ballistic glasses that is made for shooting protection.

Eyes and ear protection are the things I don't mind spending a little more money on as you obviously only have one set of eyes and ears. Another great thing about these are that they have super thin ear pieces that are designed to fit under over the head ear muffs.

[winson604]

^^
Yea good point. Reading up on glasses it seems one of the main concerns is if they fit properly under or over ear muffs.

As for muffs, that they're not so big that it gets in the way of the stock.

Of course the most important is protection first.

Thanks for helping a noob out so far. I'm sure there are more things I need to consider buying but I'm well on my way.

[Eternal_SiR]

i use the Howard Leight Impact Sport ones as well. for the price, its a steal. For glasses i use my own prescription glasses that are range approved. Impact resistant/shatter proof lens and titanium frame. They are so light you barely notice your wearing anything.

[originalhypa]

I use Smith Optics Aegis Echo. Although these glasses are a little pricey, they are actually ballistic glasses that is made for shooting protection.

+1 for the Smiths.
I run these when I'm wearing contacts, and they're nice. The problem is that I rarely wear contacts to the range.

For glasses i use my own prescription glasses that are range approved. Impact resistant/shatter proof lens and titanium frame. They are so light you barely notice your wearing anything.

So sick.
I need to go with something like this.

[Eternal_SiR]

+1 for the Smiths.
I run these when I'm wearing contacts, and they're nice. The problem is that I rarely wear contacts to the range.



So sick.
I need to go with something like this.

yeah my glasses awesome. I got lucky as my friend owns a optometry place so he hooked me up with lens and frame for around $300

[CRS]

Good price for 308. I wonder if Reliable is willing to match it.

Crates of Norinco .308win on sale June 25-27 (http://www.canadiangunnutz.com/forum/showthread.php/1254482-Crates-of-Norinco-308win-on-sale-June-25-27)

[Zedbra]

Italian Sporting Goods is having their summer sale today and tomorrow. I picked up a nice leather shoulder holster for my Dan Wesson. I had been eying it for the better part of a year but didn't want to pay $200 for it. They had it stashed downstairs, got them to bring it up, I hummed and hawed and got it for $100. Deal.

Also picked up some G96, a few reloading tid bits, some Federal bricks for $30, and also some smoked BC plastic hot lips 1/ mags for $15 each. I went around lunch time and I expected it to be a bit more busy.

[Hondaracer]

So I've taken that MK22 out a couple times now. First time my dad took it out and the thing shot like fucking garbage, obviously the guy on CGN was either bullshitting me or somthing but the gun could barely shoot 3-4 rounds without jamming, couldn't cycle casings etc.

Took it all apart and addressed the problem areas that the factory "fix" was suppose to take care of. Took it back out this weekend and shot much better, could get through full mags without a jam. Few jams from bad cycling but it was fully improved.

It's a pretty cool gun, on the recoil/bolt opening and closing it has a bit of a different sound/feel, it really does feel like an actual carbine not just some dinky .22

[Zedbra]

I've been working on cleaning/repairing/refinishing my friend's Ruger .44 Deerslayer over the last several months. The rifle was in really rough shape when I first picked it up from him, I have lost most of the pictures but the stock was beaten, dented, cracked, and both the stock and inside the action had never been cleaned. Ever - since 1974.

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/2015-04-02%2021.25.41_zpsa3kydd8x.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/2015-04-02%2021.25.41_zpsa3kydd8x.jpg.html)

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/2015-04-02%2021.26.13_zpsffoyghue.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/2015-04-02%2021.26.13_zpsffoyghue.jpg.html)

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/2015-04-04%2010.56.14_zpsazxjev7w.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/2015-04-04%2010.56.14_zpsazxjev7w.jpg.html)


So I stripped it down, started reading how to try to restore this poor old stock. I stripped it with Circa 1864, steamed all the dents over the course of another weekend, then let it dry before applying epoxy to a large crack and then letting it sit for another month to completely cure.

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/2015-04-04%2010.56.37_zpspnpv482p.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/2015-04-04%2010.56.37_zpspnpv482p.jpg.html)

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/DSC01129_zpsrrapneay.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/DSC01129_zpsrrapneay.jpg.html)


I sanded the stock first with 100, then 220, then 600 before starting to add my layers of Tru Oil. I only did one coat per day of Tru Oil and after the first 8 coats I started to smooth the finish with 1000 grit and then the final two coats I sanded with 2000 grit to get it smooth.

I discovered what I initially thought was a scratch filled with dirt was actually a crack across the grain on the pistol grip. From another thread that I asked about this crack, I learned that this piece of walnut is an outside cut and the crack could have happened during falling or perhaps a wind crack. My neighbour knew it was an outside cut just from looking at the stock while I was sanding - as most of the stock is a nice cherry walnut but the front forearm on one side is completely blonde - it's kid of unique.

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/2015-06-21%2021.11.36_zpsgfmtiox7.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/2015-06-21%2021.11.36_zpsgfmtiox7.jpg.html)


Here it is after three coats

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/DSC01133_zpstjshrsvr.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/DSC01133_zpstjshrsvr.jpg.html)

Here it is after 12 coats, polished and also carnuba waxed:

The half blonde side -

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/DSC01397_zpsodyturym.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/DSC01397_zpsodyturym.jpg.html)

Reflection finish

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/DSC01396_zpsya04jmld.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/DSC01396_zpsya04jmld.jpg.html)

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/DSC01402_zpsoxlcwajw.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/DSC01402_zpsoxlcwajw.jpg.html)

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/DSC01403_zpsywzpwsz0.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/DSC01403_zpsywzpwsz0.jpg.html)


I messed up the finish a little during the polishing stage - so that took more time to correct. This whole project was all about learning how to do this properly and now I think I am ready to try another project with some of my other stocks. It was a lot of labour but a lot of fun, I really enjoyed seeing it slowly come back to life.


I can't wait to get this back to the range.

[Hondaracer]

sweet! looks great man

[Zedbra]

Guess I missed wood working, decided to make a target today. I had some of those black plastic stands you stab into the ground, but they keep getting blown over in the wind, and blown up from bad aim with open sights.

I had the folding table saw stands already and the wood laying around, so $3.80 for some bolts and wing nuts, I made this adjustable stand. I also drilled multiple holes in the top that can hold straws, golf tees/balls, and my clay holders. I'm going to work on a different stand that will have a swinging target as well.

Used target is from sighting in my new Zeiss Terra - had already done a dozen shots through my 7mm Mag and that was enough for the day

[incubus]

ammo is 10% for the next 2 weeks on Thursday and Friday at international

want this bad how cool is this?
Chiappa Mare's leg Take down model Now in .357 Mag!! (http://www.canadiangunnutz.com/forum/showthread.php/671095-Chiappa-Mare-s-leg-Take-down-model-Now-in-357-Mag)!!

[T4RAWR]

Closest thing you can carry to a pistol in the woods without an atc. I own a fullsize chiappa and found the quality lacking. Took a while to break in but works pretty decent now. I have the 1892 alaskan in .44 mag as a bush/camp gun. I keep it loaded with hornady .300gr xtp or custom loaded .300gr hardcast +p stuff for bears and whatnot.

If you dont have a levergun you should grab one ;)

[originalhypa]

If you dont have a levergun you should grab one ;)

werd.

I went with the Marlin 1895 chambered in 45-70. I wish I would have waited for this to come out, as the .357 is a much cheaper round, and a lot easier to find. I'm not a huge Chiappa fan, but this is such a simple rifle.

That said, one shot from a 45/70 will take down ANYTHING the BC wilderness has to throw at you. It's a cannon!

[originalhypa]

^
since this is pertinant to our conversation, a suppressed Mare's leg SBR.

https://www.youtube.com/watch?v=YXc0rm6dzVs


Plz Mr. Harper, let us can haz sum supprsssors?

[Zedbra]

I finally received my EWK 106mm barrel with a custom bushing/nut to go with my original DW 4" shroud.

A while ago I bought a Dan Wesson 15-2 that was a pistol pack, but the seller could not legally sell me the 2" and 4" barrel (but I have the shrouds). After a couple emails, months of waiting for Eric at EWK to have a little spare time, he finally agreed to make me a custom 106mm barrel for my 4" shroud. I also bought a few EWK parts kits, EWK barrel tools, and ordered a few cylinder stops from DW directly, then had all of that shipped to a legal exporter and then waited months for everything to arrive. I still need to press the cylinder stop in properly and then get this out to the range.



http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/20150721_182103_zps7yq2w1vq.jpg

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/20150721_182043_zpsqvvgnybd.jpg

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/20150721_182230_zps6iq7mboz.jpg

[originalhypa]

Zed, I have no idea what you did there, but it looks really freaking cool.
I'm tits deep in work, family ,and hockey these days, but I had a chance to add to my collection, AND hit the range last week. I'll post some pics of my new purchases when I get the uploaded to photobucket.

[Zedbra]

^ you mean the revolver? Dan Wessons have interchangeable barrels and shrouds - so my two DW revolvers can use many different sized barrels. I have a 10" barrel/shroud, two 8" barrels/shrouds, two 6" barrels/shrouds, and now one 4.2" barrel/shroud. The original barrel is prohibited, as it was 101mm. This custom 106mm barrel works with the old shroud, but instead of being flush, I needed to have a bushing made to go into the shroud and then the barrel nut is now on top of the shroud.

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/2015-05-03%2009.39.47_zpsytcgsbt7.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/2015-05-03%2009.39.47_zpsytcgsbt7.jpg.html)

[originalhypa]

It's the barrel nut that is throwing me off.
That gun is a beast.

Is anyone interested in the STG-44 that is coming out?

http://i.imgur.com/Q80xS4m.jpg

The concept makes me happy from a nerdy FPS gamer perspective. But it's only 22LR, and I have enough of those.

9lbs though..... I guess it could always be used as a club once it runs out of ammo.

[incubus]

really cool 22 I've handled one at the shop.

good old call of duty and medal of honour days.

as you know me it's not restricted so I don't like it lol jk

[Zedbra]

I spent a good chunk of the day cleaning my hand guns - having multiple barrels is fun but sure makes for a long clean job. I also replaced a cylinder stop in one of my Dan Wessons - I waited months to get them up from the States and it took a little careful filing and a gentle pressing to get it in without cracking the side plate. I'm hoping I can get the groms to agree to go to the range tomorrow to dirty them up again. :)

[originalhypa]

It's a good day to shoot. Or work on guns. I've been filling the calendar lately and having a good time. Some rain and an inside day would be good for the system.

Especially when new shit finds its way to your mailbox.
I like holstering at the range, but had a heck of a time finding a holster for my 1911 recon.

Enter the Israeli designed, recover cc3 grips and holster.
http://img.photobucket.com/albums/v253/hypasteve/Mobile%20Uploads/IMAG0380_zpsatmt4zcn.jpg

I also love the 10/22 rifle. It's cheap to shoot, relatively precise, and a lot of fun with a full mag and some steel down range. I have a dragonov clone already, but always wanted to build a short version.

I'm almost there.
http://img.photobucket.com/albums/v253/hypasteve/Mobile%20Uploads/IMAG0377_zpsy0m52w1x.jpg

I need to grab a short barrel for the folding Fab Defense stock, then a hundred round drum. Trigger mods are always in order. Maybe I'll do that today?

Then I can move the bull barrel receiver back to the dragonov stock along with the optic (thanks again zed!!)

I'm still not sure what kind of sights I will go with on the shortie. Maybe some battle sights?

[Zedbra]

^ nice looking trio there. I see you mounted the scope sideways - I've done that before on my hunting rifle, as well. Why have the damn knob on the right - I use that hand to hold my rifle.

What will you use the shorty for? A micro dot would look great, but may not suit your function.

[Zedbra]

Looking at that optic again, it sure is big for what it is - looks good. I have a 100 round drum that I don't use very often - it prefers the good ammo only, it will bend lead tips quite often.

[Zedbra]

I just reloaded my first 20 rounds of 7mm REM MAG. I did a variety or bullets and used a balance beam and digital scale, I shall run them through my chrony and see how they do there and on target.

My 7mm MAG is an old Parker Hale with a slow twist, so it prefers lighter bullets versus the nowadays "the heavier the better" the young guys at the gun stores tell ya. Splitting between balance beam and digital scale, I loaded 67g of H1000 and did the following bullet types: (8) 154g Hornady Interlock SP, (6) 150g Nosler Ballistic Tip, and (6) 139g Hornady SST.

Been nervous to reload the big magnum cartridges but I think I have done enough mistakes with my handgun rounds that I took my time, rechecked everything twice, and I'm confident these should work well. Looking forward to some time at the range to test these out.

[Eternal_SiR]

glad everyone is enjoying the nice weather and being able to shoot. I'm looking forward to when i can shoot again. Going in for back surgery tomorrow so should be able to shoot hopefully in the next 2 months. Had to sell my truck because i can't climb in and out and drive stick for a while. So ended up getting a treat for myself... not gun related though
http://i833.photobucket.com/albums/zz260/Eternal_SiR/Mobile%20Uploads/00t0t_1tPe1AqaOUw_600x4502_zpsa7ugw3uc.jpg (http://s833.photobucket.com/user/Eternal_SiR/media/Mobile%20Uploads/00t0t_1tPe1AqaOUw_600x4502_zpsa7ugw3uc.jpg.html)

[originalhypa]

^ nice looking trio there. I see you mounted the scope sideways - I've done that before on my hunting rifle, as well. Why have the damn knob on the right - I use that hand to hold my rifle.

What will you use the shorty for? A micro dot would look great, but may not suit your function.

Being a T97 shooter, I've had to get good with my left hand. The great thing about mounting the scope like that is that you can make minor adjustments on the fly. The D2D scope is a nice piece. The eye relief is perfect, and minor changes can be done with the knobs. Thanks again for that!

A micro dot would be cool. But I'm thinking battle sights. The shortie 10/22 would be for fun. Basically something I could take out to the bush, and pick off pop cans. Maybe throw it on the back of the dirt bike and use it on the odd grouse too.

Looking at that optic again, it sure is big for what it is - looks good. I have a 100 round drum that I don't use very often - it prefers the good ammo only, it will bend lead tips quite often.

We should talk about the hundred rounder. I was doing some research, and they respond well to fine tuning of the feed ramp. I should have bought one from the Cloverdale gun show for $100. I made my best Revscene lowball at $80, but he wouldn't bite.

No Ragrets.

:rukidding:

Been nervous to reload the big magnum cartridges but I think I have done enough mistakes with my handgun rounds that I took my time, rechecked everything twice, and I'm confident these should work well. Looking forward to some time at the range to test these out.

There is a little more liability with the magnum rounds, for sure.
I just got my 357/38 dies over the weekend and I'm looking forward to putting some rounds together.

Shooting is getting expensive with $10.99 CCI minimags and $54/20 for the 45/70.



glad everyone is enjoying the nice weather and being able to shoot. I'm looking forward to when i can shoot again. Going in for back surgery tomorrow so should be able to shoot hopefully in the next 2 months. Had to sell my truck because i can't climb in and out and drive stick for a while. So ended up getting a treat for myself... not gun related though

Good to hear man!
You've been through a lot, but hopefully now things will look up for you. Keep us updated with your progress!

:fuckyea:

[Eternal_SiR]

Being a T97 shooter, I've had to get good with my left hand. The great thing about mounting the scope like that is that you can make minor adjustments on the fly. The D2D scope is a nice piece. The eye relief is perfect, and minor changes can be done with the knobs. Thanks again for that!

A micro dot would be cool. But I'm thinking battle sights. The shortie 10/22 would be for fun. Basically something I could take out to the bush, and pick off pop cans. Maybe throw it on the back of the dirt bike and use it on the odd grouse too.



We should talk about the hundred rounder. I was doing some research, and they respond well to fine tuning of the feed ramp. I should have bought one from the Cloverdale gun show for $100. I made my best Revscene lowball at $80, but he wouldn't bite.

No Ragrets.

:rukidding:



There is a little more liability with the magnum rounds, for sure.
I just got my 357/38 dies over the weekend and I'm looking forward to putting some rounds together.

Shooting is getting expensive with $10.99 CCI minimags and $54/20 for the 45/70.





Good to hear man!
You've been through a lot, but hopefully now things will look up for you. Keep us updated with your progress!

:fuckyea:

well i guess i spoke too soon.. got bumped again.. 3rd time.. now its Sept 3rd. FML

[originalhypa]

I'm sorry to hear that.
:(

[Eternal_SiR]

kinda chocked.. i had all this waiting time for the surgery, got bumped a few times and yesterday when my surgery was suppose to be today i get a call saying the doctor wants more test and that he is on vacation for 2 weeks next week and they don't operate during the summer so i'll have to save a spot for you on ohhh.... sept 3rd.. like wtf? I bet the doc just didn't want to the surgery before his vacation..

[originalhypa]

It could be in your best interests to have the appt after his vacation.
I know how many things I screw up the week leading to my time off. For me, it's forgetting to send a box to Ontario or something inane like that. But for this guy, let's just say there is a lot more riding on it.

I'm trying to find the bright spot here, but it sucks. The problem with the medical world is that to survive, you must remove the humanity from what you do. But the problem is, these guys are working on humans. It's not so easy for us to forget that we have lives too.

[originalhypa]

Just got word that my lower hand guard is shipping today.
http://www.t97.ca/LHG/T97.ca_LHG_FINAL_DAYLIGHT_SHOT.jpg

That's pretty damn exciting!

[incubus]

that's awesome cant wait to see it

[originalhypa]

Werd!
Notice the ar grip too, as it has no dove tail. I'm probably going to go to wanstalls today as they have a few grip options.

Unless incubus has a doveless ar grip sitting in the back?

:D

[originalhypa]

So here's what I started with.
The new LHG from t97.ca, and a nicely built t97.

http://img.photobucket.com/albums/v253/hypasteve/IMAG0436_zpstxcwmsqm.jpg

After about 25 minutes of messing around, I read left with this.

http://img.photobucket.com/albums/v253/hypasteve/IMAG0440_zpsgshxtm4n.jpg

http://img.photobucket.com/albums/v253/hypasteve/IMAG0438_zpsfnzmfb6d.jpg

http://img.photobucket.com/albums/v253/hypasteve/IMAG0439_zpsayiflqdv.jpg

[Eternal_SiR]

sick LHG.. damn now i want one

[originalhypa]

Thanks brother!
I was hoping to get out to shoot today, but I have a meeting in half an hour, and hockey tonight.
So tomorrow will be the day!!!

Here's a wee history of my t97.


We went from this in late 2013.
http://img.photobucket.com/albums/v253/hypasteve/B529BC8A-AD7A-4B78-9068-0620355F7D36_zpsfewffmel.jpg

To this
http://img.photobucket.com/albums/v253/hypasteve/BAD85F18-8689-4AED-88C3-697CC98F234B_zpslitxbriy.jpg

Added the FTU (11/2014)
http://img.photobucket.com/albums/v253/hypasteve/IMAG0024_zpsdgeh9m5s.jpg

Bought an optic (12/2014)
http://img.photobucket.com/albums/v253/hypasteve/IMAG0298_zpsfn1nyhtc.jpg


and finished up with


http://img.photobucket.com/albums/v253/hypasteve/IMAG0440_zpsgshxtm4n.jpg


My work station has evolved over the years too.
It used to be a mess. Now it's a slightly more controlled mess.
:D

[evlee]

Who is running a mdt tac21 chassis on a bolt action? Any rs reviews?

[incubus]

I've put a couple together, I hear a lot of good things they have a good reputation and have many contracts with law enforcement

[Eternal_SiR]

im running the tac 21 on my 10TR. Love it.. but adds alot of weight

http://i833.photobucket.com/albums/zz260/Eternal_SiR/Mobile%20Uploads/20140709_175237_zpsnlaiv5vp.jpg (http://s833.photobucket.com/user/Eternal_SiR/media/Mobile%20Uploads/20140709_175237_zpsnlaiv5vp.jpg.html)

[Zedbra]

So after months of humming and hawing, I have decided on my new scope - going to try the Nikon Monarch 3 4-16x50mm with the BDC reticle. Going to see if incubus' shop can match prices I see at other stores first before I run out to get one. I seriously considered a Leupold, but the reviews of the Nikons have me more than curious to try one on my hunting rifle.

[Zedbra]

So I am also wanting a new set of compact binos for hunting/quadding/hiking. Somewhere around 8*32, maybe 9 or 10*28 - must be waterproof and shockproof would be nice. Also around $300. Anyone have any recommendations?

[evlee]

@ eternal_sir, that's a beauty!

do you mind sharing the specs of mod list, in particular the muscle break, I have a 26" heavy barrel and would like to cut it down to 20" and attach a muscle break.

Tia!

[Eternal_SiR]

not much of a mod list really. Ergo soft grip, Magpul PRS stock, the muzzle brake is just a generic one i picked up on amazon. think it was only $40 something.. works great though

[originalhypa]

I seriously considered a Leupold, but the reviews of the Nikons have me more than curious to try one on my hunting rifle.

My cousin, who is a thousand yard shooter uses a Nikon. When you're playing in the $3-4000 range for scopes, you have a few options. He liked the fact that the Nikon was built really well, and has a great warranty.

A thousand yards.
Damn.


not much of a mod list really. Ergo soft grip, Magpul PRS stock, the muzzle brake is just a generic one i picked up on amazon. think it was only $40 something.. works great though

So sweet!

I'm thinking of sending the T97 to Dlask so I can have the barrel threaded, and use any muzzle break that I want.

Very cool!

[Hondaracer]

through work knew a guy from idaho, pretty well off guy really outdoorsy etc. tonnes of toys, also a thousand yard + shooter, said once you get to a certain level in gear anyone can shoot 1000 lol

[Eternal_SiR]

[QUOTE=originalhypa;8669343]My cousin, who is a thousand yard shooter uses a Nikon. When you're playing in the $3-4000 range for scopes, you have a few options. He liked the fact that the Nikon was built really well, and has a great warranty.

A thousand yards.
Damn.




So sweet!

I'm thinking of sending the T97 to Dlask so I can have the barrel threaded, and use any muzzle break that I want.

Very cool![/QUbeen thinking the same thing for my T97 too.. would like a new muzzle break too. Wonder if we'll get a deal doing both at the same time. I work around the corner from them. While your there, hit up 4winds brewing next door.. awesome guys

[Zedbra]

As I travel through the province, I always try to stop at all the little gun shops when I have time. Managed to find some Norma soft point ammo for my 7.5x55 today - quite the surprise. The shop in Vernon - Del Selin, had a lot of ammo and nice guys. Also found a decent price on Titegroup in Kamloops.

[incubus]

you can mount a lantac dragon, its what i plan on using and its got great reviews

https://www.youtube.com/watch?v=qmnhDYetFpw

[CRS]

http://john1911.com/wp-content/uploads/2015/07/Ruger-Precision-Rifle-575x442.png
http://www.ruger.com/micros/rpr/img/models-top.jpg
http://www.gunsandammo.com/files/2015/07/Ruger-Precision-Rifle-2-300x200.jpg
http://www.americanrifleman.org/media/2314795/ruger-msr-takedown.jpg?width=1083px&height=378px

SO MUCH WANT!

[Zedbra]

Finally got out to the range, managed to shoot a few rounds of trap and then my sons were shooting their rifles. My youngest has a Red Rider and my eldest was loving the red dot I traded off hypa on his Rascal. All smiles.

[Zedbra]

My new scope arrived and I mounted it and went straight to the range to zero it in - but it was just one of those days where nothing was going right, including my targets getting blown over by the wind.

I seemed to have gotten it close, though. Clarity of the scope thus far seems great - more time is needed for an honest review. It's a Nikon Monarch 3 4-16 x 50mm.

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/20150820_185441_zpsg06yx4tr.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/20150820_185441_zpsg06yx4tr.jpg.html)

[Zedbra]

Trying to keep busy so I managed to reload 300 rounds of 38 SPL and another 300 rounds of .357 over the last few days. Figured out I have been misusing my Lee Loader Auto Disk powder dispenser, and therefore have been hot loading the last 500 rounds. Live and learn.

Oh - the $13 electronic scale another reloader recommended off eBay has been great! My wife is now using the same scale for her gemology. It can measure in grains and remembers your last unit. Holds zero and no creep.

[RRxtar]

Del Selins is sort of a local folk-hero in the Okanagan. hes a legend over generations. When my 10/22 lost its extractor spring, Grouse River and the local gun smith couldn't figure out what I was talking about, and Del said "bring it down I've got a drawer full of springs Ill find you one." and he literally had a drawer full of different springs and picked one out. lol

[evlee]

any recommendation for gunsmith local. thanks

[Zedbra]

any recommendation for gunsmith local. thanks

Lots of suggestions here:

HuntingBC.ca (http://www.huntingbc.ca/forum/showthread.php?119997-In-search-of-Gun-smith&highlight=smith)

[Zedbra]

Ordered my son a 20g O/U the other day, it will be one of his Xmas gifts. He really wanted to come out hunting with me this year but I think he needs another year to grow a little and also get more trigger time with an adequate gun.

I ordered this little guy, from Corwin-Arms. Martin there is a good guy, he is actually giving me the upgraded shotgun for the same price. The gun has been getting good reviews, so I think it will be a great first hunting gun. He can load bird shot in the upper barrel and a slug in the lower.

https://www.corwin-arms.com/product/ricol-20-1650-chrome-o-and-u-single-trigger-front-sight-bead-0

I also ordered their shotgun sight that I am going to actually try both on my revolver and also my long recoil shotgun. Martin never thought about the revolver application (all mine have vented shrouds) - so he is eager to here my review and will be giving a deal on another if it works for both applications.

https://www.corwin-arms.com/product/vomz-shotgun-red-dot-sight-fiber-optic-illumination-pf01%D1%8525

[Vansterdam]

Thinking of going with the TAR-21 Tavor as my first purchase. thoughts? Is the V2 worth getting over the V1?

[originalhypa]

Trying to keep busy so I managed to reload 300 rounds of 38 SPL and another 300 rounds of .357 over the last few days. Figured out I have been misusing my Lee Loader Auto Disk powder dispenser, and therefore have been hot loading the last 500 rounds. Live and learn.

I did the same while I was waiting for the power to come back on. I popped the primers out of my 9mm, 38 and 357 brass in preparation for tumbling. I found that the primer out allows the inside of the brass to come really clean. But you get media in the primer port.

Do you tumble with the spent primers in or out?


Thinking of going with the TAR-21 Tavor as my first purchase. thoughts? Is the V2 worth getting over the V1?

V2 is sick, especially in FDE.
That was my brother's big purchase last year, and it's a great gun. It's like buying an Audi. It looks sick, shoots sick, and is built with high quality in mind.

I've shot both the V2 ans the V1 and there isn't a big difference. But if you're going to make the big financial commitment that a Tavor demands, go for the freshest revision. You won't be let down.


Ordered my son a 20g O/U the other day, it will be one of his Xmas gifts.

:fuckyea:

Let me know how that sight works. I'm between sights on my 870 and would like to go with something that allows quick target acquisition without having to rest my cheek on the shottie. I'm tired of getting face punched by my Remington.

[Vansterdam]

V2 is sick, especially in FDE.
That was my brother's big purchase last year, and it's a great gun. It's like buying an Audi. It looks sick, shoots sick, and is built with high quality in mind.

I've shot both the V2 ans the V1 and there isn't a big difference. But if you're going to make the big financial commitment that a Tavor demands, go for the freshest revision. You won't be let down.

.

hmm apparently current gen is V2.5.. I cant justify paying 3k for a stock one though lol. hoping there will be a sale somewhere by boxing day =P or might have to consider getting a used older gen


http://oi58.tinypic.com/2hxleef.jpg

[hchang]

^ damn that's sexy

[originalhypa]

You won't be let down with any of the generations of tavor. That one you posted is pretty sick with the flat top rail and barrel cover.

With all the cerakote options these days, you can make it any color you want.
:cool:

[Zedbra]

I did the same while I was waiting for the power to come back on. I popped the primers out of my 9mm, 38 and 357 brass in preparation for tumbling. I found that the primer out allows the inside of the brass to come really clean. But you get media in the primer port.

Do you tumble with the spent primers in or out?



Let me know how that sight works. I'm between sights on my 870 and would like to go with something that allows quick target acquisition without having to rest my cheek on the shottie. I'm tired of getting face punched by my Remington.

I tumble my hand .357 and .38 brass with the primers in, the pockets stay relatively clean (compared to spent rifle brass). I'm on my third reload now and no issues so far.

My 7mm MAG rounds I will tumble with primers in, then deprime, then tumble again. I initially was hand cleaning each primer pocket and that sucked, so tumbling took out the grime and I only needed to hand clean a few. Moving forward, I will always do rifle reloading in small quantities.


I'll let ya know how that sight works - I have my hopes up.

[originalhypa]

Good to know.
I'm really anal about reloading. I don't want to blow my face off.

:D

[Hondaracer]

How much are the hand loaded 7mm running you?

[Eternal_SiR]

what are your guys thoughts on ultra sonic cleaners? Thats what i use but seems like all of you guys use media tumbling. We do have a tumbler at work that some of the guy use but i usually just stick with the ultrasonic cleaner. Mind you i have a medical grade cleaner so that may be why they always turn out perfect. Been contemplating whether to try both.

I finally got my surgery done, now in the recovery stages so hopefully soon i'll be able to go shooting again.

[originalhypa]

Good to hear eternal!
Congrats.

As for cleaning, I'm stuck with what I have and that's dry media. My friend has a jewelry store and uses an ultrasonic cleaner, and it's the best. I just wish I had better access to one.

[Eternal_SiR]

Good to hear eternal!
Congrats.

As for cleaning, I'm stuck with what I have and that's dry media. My friend has a jewelry store and uses an ultrasonic cleaner, and it's the best. I just wish I had better access to one.

Thanks, it was quite a surprise. It was suppose to be originally on Sept 3rd but the called me on the 18th and said there was a cancellation and if wanted to do it on the 20th. super short notice but i ended up getting in so that was a relief. Then you can always borrow mine once you have a big batch ready. I have 2 medical ones. One that does about 500 9mm and another one that does about 500 .308 cases.

[Zedbra]

How much are the hand loaded 7mm running you?

I haven't broken it down yet to the penny, but I estimate roughly $1 per round after 200 rounds. Store bought is between $2-$3 per round

Thanks, it was quite a surprise. It was suppose to be originally on Sept 3rd but the called me on the 18th and said there was a cancellation and if wanted to do it on the 20th. super short notice but i ended up getting in so that was a relief. Then you can always borrow mine once you have a big batch ready. I have 2 medical ones. One that does about 500 9mm and another one that does about 500 .308 cases.

Good to hear you finally got the surgery - I always say you are only as old as your spine.

As for media/ultrasonic/wet tumbling - I think they all accomplish the same results, it just comes down to how 'clean' and shiny you want them. I watched a Jerry Michulek video where he tumbles his brass in a cement mixer - and he sets records. Pick your poison.

[Zedbra]

I am seriously considering a Ruger Single Six - I love my wheel guns now. Does anyone have one, or some time behind one? I can't find a single negative thing about this gun, I'm on that brain wave that I think cannot be stopped once it gets going. :lol. I need more therapy - group therapy. :fullofwin:

[originalhypa]

Thanks, it was quite a surprise. It was suppose to be originally on Sept 3rd but the called me on the 18th and said there was a cancellation and if wanted to do it on the 20th. super short notice but i ended up getting in so that was a relief. Then you can always borrow mine once you have a big batch ready. I have 2 medical ones. One that does about 500 9mm and another one that does about 500 .308 cases.

I will head out to grab my reloading gear this week. As of now I'm using my dad's setup but once you're better we should get together and have a reloading party.

:fullofwin:

I am seriously considering a Ruger Single Six - I love my wheel guns now. Does anyone have one, or some time behind one? I can't find a single negative thing about this gun, I'm on that brain wave that I think cannot be stopped once it gets going. :lol. I need more therapy - group therapy. :fullofwin:

The only bad thing I can think of with the Ruger is the way the grip handle hangs so far back off the chassis.

http://i256.photobucket.com/albums/hh198/jriler/Handguns/RugerSingle-Six_1.jpg

That said, I'm being a bitch about it. I have never shot the Ruger, and chances are I'm making excuses because my shooting budget is gone this year after getting set up for reloading.

http://i274.photobucket.com/albums/jj271/burningchampion/guns/500.jpg

I'm a Smith and Wesson guy. Something about how they feel is just perfect. In fact, I should head to the range and shoot today. The Int'l guys are usually there on mondays. Maybe incubus will be there?

OpieOP

[Vansterdam]

anyone been to the new range in Langley yet? found it through a groupon which says their suppose to be opened mid September. sooo Im guessing it should be open?

INDOOR SHOOTING LANGLEY RANGE FIREARMS GUNS (http://www.therangelangley.com/)

https://www.groupon.com/deals/the-range-langley

http://static.wixstatic.com/media/e56485_d0b65dd29aac493f96cf790e33203c67.png_srb_p_ 1332_895_75_22_0.50_1.20_0.00_png_srb

thinking about getting that 15 month membership groupon deal lol

[Zedbra]

Haven't been - tell me what the tactical range is all about. :lol:

Going to stop in Reliable and check out some .22s today. **cue music**

[Vansterdam]

Haven't been - tell me what the tactical range is all about. :lol:

Going to stop in Reliable and check out some .22s today. **cue music**

Im more interested in that Chuck Norris lounge ;)

[originalhypa]

anyone been to the new range in Langley yet? found it through a groupon which says their suppose to be opened mid September. sooo Im guessing it should be open?

It's close to my work, so I'll drive by today.
But it was supposed to open in May, July, August, and now September. I'm signed up for the 15 month, but I won't pay a dime until I know it's going to open.

I recommend the same. I met the guys, and they're shooters, not businessmen.

But I really hope that it opens. I have been hankering for a good monday pistol day after work. That's the member's only day.

Haven't been - tell me what the tactical range is all about. :lol:

Going to stop in Reliable and check out some .22s today. **cue music**

You are such a gun whore, I love it!

:alonehappy:

[Vansterdam]

It's close to my work, so I'll drive by today.
But it was supposed to open in May, July, August, and now September. I'm signed up for the 15 month, but I won't pay a dime until I know it's going to open.

I recommend the same. I met the guys, and they're shooters, not businessmen.

But I really hope that it opens. I have been hankering for a good monday pistol day after work. That's the member's only day.



You are such a gun whore, I love it!

:alonehappy:

hmm Im curious if I buy that groupon for 15 months does it start the day I pay for it OR when the range opens

[originalhypa]

It should start the day it opens.
I'm still trying to get the hell out of the office, and off to the range. But it's been a busy, yet unprofitable day.

Business in Canada in 2015 is teh horrible.
:(

[incubus]

Haven't been - tell me what the tactical range is all about. :lol:

Going to stop in Reliable and check out some .22s today. **cue music**

another 10/22 with the magpul stock :fullofwin:

[Zedbra]

another 10/22 with the magpul stock :fullofwin:

Na, looking for a good .22 pistol or revolver. Haven't been able to find a Single Six or Single Ten. Mildly interested in the Browning Buckmark Plus UDX and the Ruger 22/45 LITE. I'm goping to read up on those two a bit more. After reading about a lot of ongoing S&W issues and over a year at times to get responses for warranty, I am scratching them off my list/

[originalhypa]

I have the Sig 1911-22 and its a fun toy. I also have an inforce green led weapon light and a cool holster from Israel. For a grand total of around $500, it's a nice piece.

Just have the trigger worked over. It's not the most silky out of the box.

[Zedbra]

I have the Sig 1911-22 and its a fun toy. I also have an inforce green led weapon light and a cool holster from Israel. For a grand total of around $500, it's a nice piece.

Just have the trigger worked over. It's not the most silky out of the box.

I never really thought about the GSG/Sig format, the 1911 isn't really my thing, but perhaps I should consider it. Nonetheless, until I scratch the Single Six/Ten off the list I won't be making any decisions. I really liked the feel of the Buck Mark UDX in my hand - the wide and double canted trigger fealt good holding in both hands, which is what I want as I like to shoot single handed with both.

Off the list already: Ruger Bearcat, S&W 617, Bersa 22, and the Alpha S&W clone.

[originalhypa]

I wish I could give you the 1911-22 for a week so you could get to know it. It was the first pistol I that bought, pretty much on a whim. But the 1911 chassis works so well. I love the dovetail, and how the gun fits in my hand.

The buckmark is a nice piece too. There are so many choices in the restricted market right now. It's a great time to be in buying mode.

For rimfire, have you considered the charger pistol? Lots of aftermarket out there for the ruger.

[Zedbra]

How accurate is the GSG? I want to try out a few shoots and I want something comfortable for my large hands and also accurate.

[Zedbra]

Just reloaded 20 precise rounds for my 7mm MAG. Going hunting so very soon and I am already having troubles sleeping with anticipation....like a kid on Xmas Eve.

[incubus]

did the liberals lock this thread?

[Zedbra]

I was just coming here to post in this thread - I was wondering the same thing.

So I picked up a Ruger SP101 .22LR and it has the typical stiff DA. So, I am thinking of doing an order for a Wolff spring set. Seeing as how there is a minimum $25 USD order and my set is only $10 (and I don't need or Wolff doesn't have other springs for my guns), I was wondering if anyone else wants to order springs with me to get one order shipped up?

[eclipseman]

So where are all the good deals this holiday season :whistle:

I did the 5am reliable lineup last year and am going to skip that one.

[Zedbra]

Italian Sporting Goods will be the second week of December. I just got a great deal on a 1967 Browning A5 20g Magnum from them - I can't wait to try this beauty out.

[Zedbra]

Support your local gun shop - they'll treat you right over time. This A5 looks like it has barely been shot - I'm still grinning over this purchase.



http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/20151113_173712_zpsfj1gms9t.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/20151113_173712_zpsfj1gms9t.jpg.html)

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/20151113_173755_zpslpecj2vc.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/20151113_173755_zpslpecj2vc.jpg.html)

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/20151113_173832_zpsfed7jcd4.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/20151113_173832_zpsfed7jcd4.jpg.html)

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/20151113_173726_zpsxgbahphn.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/20151113_173726_zpsxgbahphn.jpg.html)

http://i459.photobucket.com/albums/qq314/Zedbra/MIsc/Private/yalg345jqMO_C2vlHg3quL9rNGtEX7rcrwtEMaXwtCA_zpsg3n omwvv.jpg (http://s459.photobucket.com/user/Zedbra/media/MIsc/Private/yalg345jqMO_C2vlHg3quL9rNGtEX7rcrwtEMaXwtCA_zpsg3n omwvv.jpg.html)