GTR 35 installed Blackvue Dr400g II dash camera+Power Magic Pro
http://farm9.staticflickr.com/8310/8...32c89c95_z.jpg

2013 Mercedes Benz E350 coupe installed Blackvue Dr400g II dash camera+Power Magic Pro+Fuse adaptor
http://farm9.staticflickr.com/8029/8...11175d9c_z.jpg

Any pics of the Matego mounted in a car? How does it compare to the DR400 HD2?

I will try to take a picture mounted on my car with MG188.

Matego Mg188 VS Blackvue DR400g II Night version
Please choose 1080p to watch.
http://artofspeedracingcanada.com/sample-videos

MG188's cabin noise is very good. Night vision quality is not bad for the price $150 includes HST comparing $250 Blackvue dr400 II.

i returned to my car to find out that my blackvue and power magic was off. this is due to the voltage auto cutoff? i turned on the car and the blackvue/PM turned on.

maybe weak battery?

^
2 possibilities
a. Battery voltage is lower than the configured voltage setting/Time past configured timer
b. Battery is lower.
When you start your vehicle, does that power magic running again with green light? If so, your battery voltage is lower than power magic configured voltage setting.
What is your configured voltage setting and cofigured timer setting?

1st generation Mazda 3 hatchback installed Blackvue dr400g II+Power Magic Pro
http://farm9.staticflickr.com/8461/8...411b4ec9_z.jpg

number 1 and 3

try 11.8 v for your configuring voltage. I don't have the power magic manual here. Just in case using a digital meter to test your battery.

Due to a customer from us disassemble the product, the product is automatically voided warranty.
If you have any questions about your Blackvue products, contact ASR at the first moment.


Reminder:
Please read the manual before you using Blackvue product.
1. Do not DISASSEMBLE, REPAIR and/or alter the product.
2. Do not spray water on each parts of the product when cleaning it. Make sure not to wet the product.
3. Do not spray a cleansing agenet on the surface of the product
4. Do not give the product a shock, and make sure foreign matter does not enter the product.
5. Do not operate the product while driving
6. Do not install the product in a location where it may interrupt a safe driving or black your view while driving
7. Excessively dark tinting on the windshield may take recorded images look blurry or distorted.
8. The optimum temperature for picture quality ranges from 0 to 50°C. The picture quality may vary according to seasons, especially in midsummer or winter season.
9. This product is fitted with a camera. Drastic changes in brightness (on entry/exit of tunnels), strong backlight in the daytime, and no light source at midnight may result in defective recorded images.
10. If power supply to the device is interrupted by a crash or accident, it may cause video not to be recorded.

Blackvue disclaimer
From Blackvue owner's manual
1.We shall take no responsibility for accidental damge, injuries and other losses caused by improper use of the product.
2.This product is a video event data recorder for vehicles but does not guarantee that all accidents will be recorded. This device may fail to record a minor accident caused by too light an impact to trigger the impact sensor.
3. This product creates a record of video to help determine what happened before, during and after the crash or event.
Blackvue shall not take any responsibility for damages (property, business and/or indirect damages).

5. Do not operate the product while driving

Wait... what!?!

I think it means don't play with unit while driving, as adjust settings prior to driving off
Posted via RS Mobile

I think do not touch the unit which might distract your driving.

These are all from Blackvue Manual.

My Blackvue is temporarily down, must be the low car battery charge. How would I know there's nothing wrong with the Blackvue itself? Car had to be jump started 2 days ago and been fine ever since, but no sign of life from the Blackvue.

^
Please check your power magic pro manual. Make sure the configured voltage setting to 11.8 V the lowest setting
1 is up, 2nd is down.

Using a digital meter to test your battery buddy/Charged your battery up/Maybe it's time for yellow top optima. :)



Important
When you change your vehicle battery, please make sure your pmp switch is on 0 which is off.

2009 Nissan Rogue installed Blackvue Dr380g HD+PMP
http://farm9.staticflickr.com/8335/8...ae1e7f3e_z.jpg



2012 Mini Cooper install Blackvue dr400g II+PMP
http://farm9.staticflickr.com/8469/8...ffd6c94d_z.jpg

^That's a Rogue, not a Vogue lol

My Blackvue and Power Magic weren't turning on after my battery died and needed a jump start.

asr took the time this evening to diagnose the problem, and re-wired it! Works like a charm now, and the install is as clean as the first time. Thanks!!

Right after the install, I encountered a dumbass driver already:
http://www.revscene.net/forums/65475...ml#post8057027

Where was it wired to before, and where is wired to now?

Exactly same as before. His vehicle did a jump start and the power magic was dead. I connect to the Power Magic with the battery and test the harness which is fine. Permanent is dr Lock, accessory is Cig lighter.

speechless


X5 owner intended to cut off the Q7

Why?

............you're in Richmond afterall :troll:

Thanks for the clean install Will.
Knows what he is doing and answered all my questions.

Also remember when installing the SD to take the camera off the dock and be gentle, straight, and make sure its the right way or it will get stuck :ifyouknow:

Thanks once again.

Blackvue Dr400g HD II with PMP installed on LR4

http://farm9.staticflickr.com/8048/8...afa1aa455f.jpg

new smell Blang air stick freshener in stock
White musk, Green Tea, Citrus Lemon, Splash (squash), Sandal wood (cologne)
http://www.carmate.co.jp/upload/save_image/h203-390.jpg

http://www.carmate.co.jp/upload/save_image/h202-390.jpg


Special Revscene Member Price: $10/per stick including HST
Refill pack price: $7/per pack including HST