[Lowered_Klass]

y8Zx7kmRKq


aaaand something fo ma ass lol


zdmmp9mRKX

[tastic]

summer rubber and catback for the roadster
http://i496.photobucket.com/albums/rr330/tasticfoto/IMG_00002665_1.jpg

[underscore]

A discontinued Blitz NUR Spec R midpipe and axleback for the GTFour, the exhaust I originally wanted but couldn't find when my stock exhaust exploded.

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/v/t34.0-12/10847082_888002024554368_1781074739_n.jpg?oh=854c7 415ff44ce56fe6e261cb11e71d1&oe=54F89C58&__gda__=1425568712_00039291e736032d4184a6f377442b5 e

[white rocket]

^^Had that on my STI. It was, um, loud to say the least. :thumbsup:

[underscore]

It can't be any louder than my current setup, I believe the Blitz at least has a resonator.

[hud 91gt]

Not impressed with what this ended up costing me, should have gotten it locally (Or attempted to make my own Stainless version, seriously like 2 bends in the whole thing!) but I'm pretty pumped to get it on the Z. Carb rebuild kit was expensive, but comes with all the advice I require over the phone. Now, and in the future.

2.5" Mandrel bent exhaust, new exhaust and intake manifold studs, NOS Datsun inner shift boot for the auto to manual swap, Ztherapy carb rebuild kit.

[KDMofo]

For more Pressure and more :lawl: WOOOSHHHHHHHHH

http://i.imgur.com/rGvyn44.jpg

[Akinari]

Was stuck between purchasing an OEM rear air deflector or an EDM DC2 rear fog light, ended up impulse buying these two things instead. I put car audio upgrades on the back burner a few months ago when my car needed a lot of suspension work. Now that that's all done (almost...seized inner tie rod shipping), I can focus on car audio again.

Clarion XC1410

Clarion U.S.A. | XC1410 (http://www.clarion.com/us/en/products/2013/audio/amplifiers/XC1410/us-en-product-pf_1259655191135.html)

http://www.clarion.com/us/en/MungoBlobs/692/607/XC1410-US_11_large,27.jpg

Pioneer TS-A1605C

TS-A1605C - 6-1/2" Component Speaker Package (6-3/4" Compatible) | Pioneer Electronics USA (http://www.pioneerelectronics.com/PUSA/Car/Speakers/A-Series/TS-A1605C)

http://www.pioneerelectronics.com/StaticFiles/PUSA/Images/Product%20Images/Car/TS-A1605C_large.jpg

Already have upgraded Pioneer coax in all four doors, but the stock tweeters are still working up front so I effectively have four tweeters in the front right now :fuckthatshit: so front components will remedy that. Will move my front coax into the rear which is a set with the front components, and sell the older rear coax. Keeping the stock sub and just using the micro amp to power that with a tiny bit more juice than the shitty stock amp, which is all it can really handle before blowing. If I still find the bass insufficient (in terms of quality and deepness more so than earth shattering bass), I'll get a single 8-inch shallow mount sub and stick it in the back.

Undecided on HU, don't know if I want to drop a ton on a 2DIN with a touchscreen or just stick with a simple but higher-end 1DIN. I'm leaning towards the latter due to the fact that a 2DIN touchscreen will end up just being one more unnecessary distraction and a higher-end 1DIN includes all the functions I need anyway including mainly BT and Siri Eyes Free at a much lower price.

Man I spent a lot more than I expected :badpokerface:

[Spaceship_coupe]

Ordered an OEM TSX rear swaybar and bushings to upgrade the Accord coupe's 15mm to 17mm. Pics to follow. I love OEM goods. :megusta:

[cantona]

Test fitting my Work Cr Kai Kiwamis GT silver tomorrow at G5

18x8.5 +30 F
18x9.5 +38 R (deep concave yo, see pic)

http://ravspeconline.com/images/wheels/work/kiwami/kiwami-1302.jpg


Got a Eibach prokit ordered too :fullofwin:

[KDMofo]

So many people are getting/have Cr Kai's. I wish I could afford but I'd rather put that money towards more poawerrr.

[alf]

http://i62.tinypic.com/bx8xt.jpg

[Bimmette]

New side skirts/ rocker panels!

[Energy]

Nice. Is there going to be a how to install video?

[Bimmette]

Nice. Is there going to be a how to install video?

Of course :D

[a00755836]

oem bose system doesnt pump enough bass.

http://i1307.photobucket.com/albums/s588/a00755836/DSC_0173_zps1y8jf0pq.jpg (http://s1307.photobucket.com/user/a00755836/media/DSC_0173_zps1y8jf0pq.jpg.html)

http://i1307.photobucket.com/albums/s588/a00755836/DSC_0175_zpsbo6wyb7h.jpg (http://s1307.photobucket.com/user/a00755836/media/DSC_0175_zpsbo6wyb7h.jpg.html)

[Oshiguru]

Picked up some pilot super sports for my mazda 3 the other day. Can't wait to go for a cruise after they're installed

http://i.imgur.com/LOwTqAj.jpg?1

[herman]

https://igcdn-photos-g-a.akamaihd.net/hphotos-ak-xpf1/t51.2885-15/1662503_1383461915307374_1558223758_n.jpg

[evlee]

http://i100.photobucket.com/albums/m35/evlc1980/00l0l_c1U4lAaTKy2_600x450_zpsolaus5fl.jpg
20x10 for the rig..... now i need tires duras or nittos!?

[knight604]

new grilles and f10 zhp knob ...

[aloobrar]

i really wanted to get some professional detailing products this time around but oh well, maybe when i use up all the remaining polish/glaze/wax i have from last time.

still much excite :fullofwin:

http://i1372.photobucket.com/albums/ag335/aloobrar/Mobile%20Uploads/20150316_225223-1_zpswhmkqbod.jpg

[Akinari]

For whatever reason, due to either worn trailing arm bushings on one side, a bent subframe or otherwise worn suspension components, I have uneven camber when lowered the same amount on both sides. LR is -5 degrees and RR is -4.2 degrees with no adjustability, and there is a visible difference when viewing the car from the rear which is driving me nuts :fuuuuu:

$85 CAD later, problem solved :alonehappy: arriving on the 24th, installing on the 25th. Looking to get the RR to match the LR's -5 degrees of camber.

http://i.ebayimg.com/images/g/Q7QAAOSwnDxUhgAJ/s-l1600/r.jpg

[!e.lo_]

I... I'm ashamed of myself because of how many things I've bought... =/

[!Aznboi128]

I bought this

http://www.liveatredbrick.com/wp-content/gallery/homepage/home-1.jpg

so i have to give up on this

http://www.globaltimeattack.com/wp-content/uploads/2012/11/GTA_SLB_2012__049.jpg


:okay:

[Akinari]

inb4 he bought the entire complex including that X6 out front :troll:

[hud 91gt]

For whatever reason, due to either worn trailing arm bushings on one side, a bent subframe or otherwise worn suspension components, I have uneven camber when lowered the same amount on both sides. LR is -5 degrees and RR is -4.2 degrees with no adjustability, and there is a visible difference when viewing the car from the rear which is driving me nuts :fuuuuu:

$85 CAD later, problem solved :alonehappy: arriving on the 24th, installing on the 25th. Looking to get the RR to match the LR's -5 degrees of camber.

http://i.ebayimg.com/images/g/Q7QAAOSwnDxUhgAJ/s-l1600/r.jpg

Must be a Honda problem. My TSX has the same issue. With all of 70,000km, no accidents.

[jdmfemme]

Bought these to go with my Meisters that should arrive from Japan soon! :)

http://i933.photobucket.com/albums/ad173/femmefatale92/20150314_101508_zpsckl19opj.jpg (http://s933.photobucket.com/user/femmefatale92/media/20150314_101508_zpsckl19opj.jpg.html)

[white rocket]

Added a bit of bump. $180 on Amazon. Sub/amp/box combo. Easy disconnects for removal.

http://i81.photobucket.com/albums/j217/whiterocket/IMG_1461_zpsi2xvejqa.jpg (http://s81.photobucket.com/user/whiterocket/media/IMG_1461_zpsi2xvejqa.jpg.html)

Added some lighting as well.

http://i81.photobucket.com/albums/j217/whiterocket/IMG_1462_zpsds20av7j.jpg (http://s81.photobucket.com/user/whiterocket/media/IMG_1462_zpsds20av7j.jpg.html)

[CCA-Dave]

My Lordco & Napa receipts for Project Audi are nearing $650 just this week alone. Ugh, not even really fun stuff to photograph...

[trollguy]

i'm more interested in knowing why you have a framed photo of a man with a snake wrapped around him.

[underscore]

white rocket: Find some kind of security nuts or something to prevent those lights from getting stolen, seems to be happening a lot lately.

[white rocket]

trollguy: it's a woman. I swear. nigga, you gay!

[tastic]

I picked up a second ultragauge for the TT and discovered some small revisions to the EM1.2 version I have in the Mazda...it is mostly the same as my current one, but they have added a Performance folder.
http://i496.photobucket.com/albums/rr330/tasticfoto/IMG_00002933.jpg

[!e.lo_]

I bought this

http://www.liveatredbrick.com/wp-content/gallery/homepage/home-1.jpg

so i have to give up on this

http://www.globaltimeattack.com/wp-content/uploads/2012/11/GTA_SLB_2012__049.jpg


:okay:

Stop kidding yourself. You never had a race car.

[!Aznboi128]

Stop kidding yourself. You never had a race car.
but I really wanted one....

[bcuzracecarz]

I got new shoes today after taking forever to decide
http://i1294.photobucket.com/albums/b606/Sincereal/Mobile%20Uploads/20150321_172058_zpse7kw850l_edit_1426990349955_zps abvde5lo.jpg
http://i1294.photobucket.com/albums/b606/Sincereal/Mobile%20Uploads/20150321_172108_zps1sriwdws.jpg

[kchan]

https://scontent-sea.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/10312384_10152645942557653_5894807953906866098_n.j pg?oh=7d7030d957153b7c0655fea706d6be51&oe=5576E224

wider r comps for the widebody

these tires will used exclusively for street driving and snow days

my old set of r888 heat cycled out but still has tread for street driving - sadly too thin now
werent too happy with the r888 lasting only 5 track days going to give the nt01 a try as they are a similar compound to the ra1 which is suppose to last longer

sadly cannot run slicks unless i have a way to transport it down lol

[KDMofo]

Bucket hat = bucket seat

http://i.imgur.com/ynfgVri.jpg

[dared3vil0]

Bucket hat = bucket seat

http://i.imgur.com/ynfgVri.jpg

Chevy dealer, NS Automall? :suspicious:

[trollguy]

Bucket hat = bucket seat

http://i.imgur.com/ynfgVri.jpg

third world eh

[CCA-Dave]

third world eh

Well yeah, it's not like he bought the carbon-kevlar unit. Full poverty pack here...

;)

[SuperChomely]

I got some more parts for the MR2. I got a new sub bumper, wing, and radiator bracket. Install coming soon.

[R. Mutt]

Just ordered:

Muellerized Ohlins + Rear Trailing Arm Bushings
http://www.muellerized.com/suspension/ohlins_evo89_small.jpg
http://www.muellerized.com/suspension/IMG_0055.jpg


Weir Maxgrip 14 plate rear Diff kit
http://www.weirperformance.com/images/600_maxgripevo.jpg

Binary Engineering seat lowering brackets (tall people problems)
http://cdn.shopify.com/s/files/1/0699/2031/products/IMG_6611_large.JPG
http://cdn.shopify.com/s/files/1/0699/2031/products/lvs_large.jpg

[ApePee2]

let me know how they feel?

They're on my accord, but a bit too noisy when cornering hard.


Tires feel great so far with all this rain, its great for Vancouver weather. A definite improvement from my last set of hankook v12 summer tires.

The ride feels more firm, steering is better and yes theres more road noise from these tires. Then again the s2000 cabin is not great at keeping out road/tire noise.

On topic, I got a oem replica spoiler as well. Paint match is good for the price paid.

http://www.freewebs.com/li3nn/IMAG0217.jpg
http://www.freewebs.com/li3nn/IMAG0218.jpg

[tee-tea]

4 months later

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/19185_10155313894725063_6162779058742186747_n.jpg? oh=35dd4264cd5d35a48a5b98170b88cea6&oe=55B87658&__gda__=1433510339_380e84537bcbcdfc5dd8b76f7e94df6 1

[hud 91gt]

Just picked up a new electronic distributor (From a 280zx) to replace my points system, just went home to take the mount off new motor (Yet to be installed) and put it on the old motor. Mount is missing! Shit!ake mushrooms. Ugh, heres to hoping the 280zx in the junkyard have them or else I could be in for quite the search.

[bcuzracecarz]

Ordered a new Cobb catted downpipe from Dale's...hopefully install soon after it arrives, get back to stage 2+ again!

[euromoron]

Renewed my insurance. Gotta love paying nearly the same as the value of the car just to keep the thing on the road for a year. Not having a job + paying in full with a tiny discount makes for a serious kick in the nuts.

But hey, at least I managed to put the sticker on straight. :fuckyea:

[dared3vil0]

Holy crap I did not realize they were this wide... :O



http://i738.photobucket.com/albums/xx27/dared3vil0/Mobile%20Uploads/photo_zpscadd23b6.jpg?t=1428114624




Hello mechanical grip!!

[boatcaptain]

going to be attending my first track day,time to change some body fluids !
http://i17.photobucket.com/albums/b86/jc8899311/fluids_zpsm7s2h00k.jpg (http://s17.photobucket.com/user/jc8899311/media/fluids_zpsm7s2h00k.jpg.html)

and some massive 3" ducting
http://i17.photobucket.com/albums/b86/jc8899311/duct_zpsim1xiubr.jpg (http://s17.photobucket.com/user/jc8899311/media/duct_zpsim1xiubr.jpg.html)

[Akinari]

Just ordered a pair of these for my rear signals. Converting to LED and these are apparently the brightest on the market right now, blindingly so according to some :derp:
http://i.ebayimg.com/00/s/ODAwWDc5OQ==/z/f5AAAOSwg3FUdC4U/$_35.JPG

Taking one of my rear turn signal red incandescents and doing a rear fog conversion in the driver's side rear reverse light socket. Going to get a piece of LaminX to cover up the clear area as well. Anyone know how I would rewire/splice the reverse light to go on with the rear tail light instead of when the car is put into reverse?

[ts14]

Just ordered a pair of these for my rear signals. Converting to LED and these are apparently the brightest on the market right now, blindingly so according to some :derp:
http://i.ebayimg.com/00/s/ODAwWDc5OQ==/z/f5AAAOSwg3FUdC4U/$_35.JPG

Taking one of my rear turn signal red incandescents and doing a rear fog conversion in the driver's side rear reverse light socket. Going to get a piece of LaminX to cover up the clear area as well. Anyone know how I would rewire/splice the reverse light to go on with the rear tail light instead of when the car is put into reverse?

Don't do it

[inv4zn]

Taking one of my rear turn signal red incandescents and doing a rear fog conversion in the driver's side rear reverse light socket. Going to get a piece of LaminX to cover up the clear area as well. Anyone know how I would rewire/splice the reverse light to go on with the rear tail light instead of when the car is put into reverse?

Rear foglights are fucking annoying - especially if you're going to have them on all the time with your taillights. You clearly don't understand what FOGlights are actually used for.

[underscore]

It's not a foglight if it's on all the time :rukidding:

and some massive 3" ducting

Where did you get that black piece?

[yray]

creaking element with smoldering trunk :suspicious:

[jing]

Where did you get that black piece?

http://www.summitracing.com/int/parts/aaf-all42141/overview/

[StanleyR]

There's only supposed to be ONE rear fog light. Anymore than that and your confusing drivers behind you

[jasonturbo]

Couple goodies for the GT3

RSS X-Pipe for that pop pop burble on decel :fullofwin:

http://i636.photobucket.com/albums/uu90/StuttgartAM/2010%20GT3%20RS%20Cross%20Trainer%20at%20RSS/2010_GT3RS_RSSupgrades_12.jpg (http://s636.photobucket.com/user/StuttgartAM/media/2010%20GT3%20RS%20Cross%20Trainer%20at%20RSS/2010_GT3RS_RSSupgrades_12.jpg.html)

Picked up a spare 997 Sport Wheel w/o multi function off eBay and had it wrapped with alcantara and stitched w/ Red thread. (My car was one of the rare GT3's that came with optional "smooth leather finish" steering wheel) This cost me about 700$ all said and done, the OEM wheel from Porsche would have been about 2300$ and would have had grey stitching.... aaaaaand it wouldn't have been as fat as my guy wraps over the existing leather.

http://i32.photobucket.com/albums/d16/jasonturbo/001.jpg

http://i32.photobucket.com/albums/d16/jasonturbo/005.jpg

LED signal,reverse,brake,license plate, dome light bulbs are for people who enjoy wasting their money and being stereotyped as ricers

[dared3vil0]

^ Who'd you get to wrap it?

[Gucci Mane]

Couple goodies for the GT3

RSS X-Pipe for that pop pop burble on decel :fullofwin:


Picked up a spare 997 Sport Wheel w/o multi function off eBay and had it wrapped with alcantara and stitched w/ Red thread. (My car was one of the rare GT3's that came with optional "smooth leather finish" steering wheel) This cost me about 700$ all said and done, the OEM wheel from Porsche would have been about 2300$ and would have had grey stitching.... aaaaaand it wouldn't have been as fat as my guy wraps over the existing leather.

LED signal,reverse,brake,license plate, dome light bulbs are for people who enjoy wasting their money and being stereotyped as ricers

thanked for the bit in the spoiler.

[Akinari]

There's only supposed to be ONE rear fog light. Anymore than that and your confusing drivers behind you
Taking one of my rear turn signal red incandescents and doing a rear fog conversion in the driver's side rear reverse light socket.
:alonehappy:

[inv4zn]

Two rear foglights would make you a retard
One rear foglight (that's on all the time) will still make you annoying.

Don't do it man

[meme405]

http://i1257.photobucket.com/albums/ii503/lafx45/P1080793_zps1gvxnscl.jpg~original (http://s1257.photobucket.com/user/lafx45/media/P1080793_zps1gvxnscl.jpg.html)

I don't know why I am bothering with this mod, probably because somewhere deep down inside I still really want to go back and complete the GTR inspired FX-R.

I saw a set of GTR brakes for sale, 3 grand for just the calipers, and they needed to be rebuilt. Fuck that.

[LP700-4]

Just ordered a pair of these for my rear signals. Converting to LED and these are apparently the brightest on the market right now, blindingly so according to some :derp:
http://i.ebayimg.com/00/s/ODAwWDc5OQ==/z/f5AAAOSwg3FUdC4U/$_35.JPG

Taking one of my rear turn signal red incandescents and doing a rear fog conversion in the driver's side rear reverse light socket. Going to get a piece of LaminX to cover up the clear area as well. Anyone know how I would rewire/splice the reverse light to go on with the rear tail light instead of when the car is put into reverse?

If you're going to do LED signals go for VLED V3 tritons. Yes they are expensive at 150/set but they are as bright as some OEM LED turn setups. I went through a bunch of ebay leds until i decided to do it properly for once.

I dont agree with LED signals = rice.

LED flash rates IMO makes a car look even cleaner. They way the reflect off street signs are pretty cool. I guess if you use cheapo ebay signals with no proper relay mods and having them hyperflash like crazy then its pretty rice FailFish

[jmanhas]

http://i1257.photobucket.com/albums/ii503/lafx45/P1080793_zps1gvxnscl.jpg~original (http://s1257.photobucket.com/user/lafx45/media/P1080793_zps1gvxnscl.jpg.html)

I don't know why I am bothering with this mod, probably because somewhere deep down inside I still really want to go back and complete the GTR inspired FX-R.

I saw a set of GTR brakes for sale, 3 grand for just the calipers, and they needed to be rebuilt. Fuck that.


I am living my fx35 dream vicariously through your build.

Love your build broski!

[meme405]

I am living my fx35 dream vicariously through your build.

Love your build broski!

LOL and I'm just here thinking how badly I wish I could buy that silver E46 ZCP for sale on here...

Thanks for the kind words.

[!Aznboi128]

I really really want this....

http://i.ebayimg.com/00/s/OTAwWDE2MDA=/z/O20AAOSwmrlUtuvN/$_57.JPG

but all I can afford is the lip... so thats what I ordered :(

[meme405]

I really really want this....


but all I can afford is the lip... so thats what I ordered :(

You still don't know who that was that yelled at you in the riverport parking lot?

:whistle:

I saw you were confused, so instead of explaining myself I dipped. lol

[!Aznboi128]

You still don't know who that was that yelled at you in the riverport parking lot?

:whistle:

I saw you were confused, so instead of explaining myself I dipped. lol
ah... the true finally came out. LOL was talking on the phone with my fiance I was more confused if where I parked was a spot or not

[Akinari]

If you're going to do LED signals go for VLED V3 tritons. Yes they are expensive at 150/set but they are as bright as some OEM LED turn setups. I went through a bunch of ebay leds until i decided to do it properly for once.

I dont agree with LED signals = rice.

LED flash rates IMO makes a car look even cleaner. They way the reflect off street signs are pretty cool. I guess if you use cheapo ebay signals with no proper relay mods and having them hyperflash like crazy then its pretty rice FailFish
Couldn't agree with you more. Getting into the little details now since I'm done with all the big things I've wanted to do with the Element. This is one of those details. I have a Tridon EP34 flasher to deal with the hyperflash.

Also for the rear fog, I'm not running a higher wattage bulb, simply taking my existing red incandescent signal and placing it into my driver's side reverse socket and rewiring that to my brake lights. Not going to be anywhere near the actual brightness of those European law-mandated rear fogs. Going to be covering the driver's side clear reverse lens area with red LaminX so that will further dim the bulb.

My inspiration:

http://images.pistonheads.com/aimg/1094/1094632-3.jpg
http://www.subaruoutback.org/forums/attachments/gen-4-2010-2014/36425d1370861791-rear-fog-lights-rf5.jpg

[!Aznboi128]

^ I don't know about others but I notice when one of my reverse bulbs are out. I am very fond of my reverse lights and would never sacrifice them for a "cool light"

if you really want to do that why not...
http://i180.photobucket.com/albums/x137/metr0park/DSC02913copyy.jpg (http://s180.photobucket.com/user/metr0park/media/DSC02913copyy.jpg.html)

[Akinari]

I'm one of those OCD guys who frequently checks all the exterior lights of my car to see if they're all working, including the reverse bulbs by putting the car into reverse and putting on the ebrake. One of the advantages of an auto trans :troll: so that would be a non-issue for me

Also Element rear bumper has a plastic crash bar that would need to be removed altogether or removed and a portion cut off.

http://img.youtube.com/vi/nYKzxWgSzOQ/0.jpg

Already thought of that ages ago, but would prefer something more integrated and OEM looking like a lot of EDM/UKDM modern Hondas.

http://www.s2ki.com/forums/index.php?act=module&module=gallery&cmd=viewimage&img=169318&md=1

[mb_]

I'm one of those OCD guys who frequently checks all the exterior lights of my car to see if they're all working, including the reverse bulbs by putting the car into reverse and putting on the ebrake. One of the advantages of an auto trans :troll: so that would be a non-issue for me


Getting out of the car while it's running and in gear... :heckno: :heckno: :heckno:

[!Aznboi128]

I don't understand how that works, if I left it in gear and put the e-brake on my car would stall.

:troll:

[RCubed]

http://i.imgur.com/hEfm1Qd.jpg
18x10.5 with 285s woo!

[threezero]

I am living my fx35 dream vicariously through your build.

Love your build broski!

Same your build made me miss the fx so much. Please don't stop

[77civic1200]

You guys realize your car doesn't have to be running right? auto or manual are the same, put it in reverse with the ebrake on, and go check.

Leaving it running in gear is retarded

[boostedcivic]

Holy crap I did not realize they were this wide... :O



http://i738.photobucket.com/albums/xx27/dared3vil0/Mobile%20Uploads/photo_zpscadd23b6.jpg?t=1428114624




Hello mechanical grip!!

What size?

[jing]

I'm one of those OCD guys who frequently checks all the exterior lights of my car to see if they're all working, including the reverse bulbs by putting the car into reverse and putting on the ebrake. One of the advantages of an auto trans :troll: so that would be a non-issue for me


My reverse bulbs light up when the car is in R, but the key is in the 2nd position of the ignition. No need to have the car running to check.

[dared3vil0]

What size?

size is 275/40/18 all around. Measure out to 11.6" wide, which is like 296mm wide. :lawl:

[knight604]

square set up ftw.

[dared3vil0]

square set up ftw.

This. The car is so well balanced with the 255's i'm running now I just couldn't upset that by going to a staggered fitment. I still wanted more mechanical grip though, so I just went with 275's square. :lawl:

[boostedcivic]

size is 275/40/18 all around. Measure out to 11.6" wide, which is like 296mm wide. :lawl:

Nice! I'm running a 285/40 right now, just got rid of the 305/35 as the profile looked really outta place.

[dared3vil0]

285/40/18 square?

[boostedcivic]

Just rear, I think I have a 255/40 on the front.

[jasonturbo]

Oil and filter kit for Mr. Mezger... starting to get the itch, can't wait to abuse the GT3 on the fabulous roads of Edmonton :derp:

[alf]

https://scontent-sea.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/10359139_10155384348230532_5944449244930159190_n.j pg?oh=f7740fbfbc3d7745cf4f2681474104d1&oe=55AFDA10

[dared3vil0]

Just rear, I think I have a 255/40 on the front.

Depending on what you do with your car I think you would LOVE going to a square setup. With staggered fitment it's just understeer for days on these cars... :heckno:

[threezero]

http://i.imgur.com/2ISADC6l.jpg

Brought a creeper from princess auto to work on my cars. Proceed to change the oil on one of my civic. Discover that the creeper isn't nearly low profile enough. Barely had room to work down there and this is on my highest car. Had to max out my jackstand. Add to that my low profile jack is now getting weaker and weaker.

Working on a creeper beats working on my mom's throwaway carpet though!! Soo target now is to get a good low profile jack that can jack my car up 2 stories high lol. Does anyone have a recommendation?

[Fafine]

lordco should have low pros on sale since its trade show time.
if youre in van hit up the sw marine drive and look for the asian kid with faux hawk, tell him ge sent you

[threezero]

^ seem like they have 24inch reach? My 3 ton jack right now does approx that I believe and I need clearance for creeper. I want a low profile jack that can lift higher :( does it even exist?

[boibuddha]

Most low profile jacks I've seen lift about 15" max, but the CDN Tire has a low profile Michelin jack which can lift 24". The kicker is that it costs $300.
Michelin 2 Ton Low Profile High Lift Service Jack | Canadian Tire (http://www.canadiantire.ca/en/pdp/michelin-2-ton-low-profile-high-lift-service-jack-0091052p.html#.VSaZW_CiA9h)

I gave up doing my own oil changes on my EF when I switched over to a B18 (lower oil filter position). With the tools I have on hand (low-pro jack and jack stands), there isn't enough clearance to torque off the oil filter. My elbow was on the floor and I could still touch the oil filter.

I felt like a T-Rex trying to open a jar of pickles, it just wasn't going to happen.

[underscore]

I just use two jacks to get the car up higher, or drive it onto some blocks of wood so my taller jack fits.

[threezero]

^yea that what i do now. Use the low profil to get it on to the stands first and than use the heavy duty jack to lift it up to max height. And than the reverse to get it back on the ground. My low profile jack is failing and was wishing for something to replace both jack... Maneuvering around 2 jacks isn't a very elegant solution

[jackp0t]

I was in the same boat as you before @threezero i had that low profile aluminum jack and it wouldnt let me raise it high enough to be able to use a creeper but not until i bought that 2 ton michelin jack @boibhudda posted.
Best jack ever! Its so solid compare to my old jack it feels strong and allows me to raise the car way higher now
Even raising an suv it doesnt feel like its gonna break into 2 compare to my old one lol.

And the best part about it i dont need to use 2 by 4 anymore to slide the jack under the car
my car for reference
http://i1178.photobucket.com/albums/x374/jackp0t_/Mobile%20Uploads/IMG_20150128_162805.jpg (http://s1178.photobucket.com/user/jackp0t_/media/Mobile%20Uploads/IMG_20150128_162805.jpg.html)

the only downside i can think is its super heavy

[jackp0t]

Got an eyelids and a different spoiler to switch up the look this year

http://i1178.photobucket.com/albums/x374/jackp0t_/20150227_134937.jpg (http://s1178.photobucket.com/user/jackp0t_/media/20150227_134937.jpg.html)

[threezero]

Most low profile jacks I've seen lift about 15" max, but the CDN Tire has a low profile Michelin jack which can lift 24". The kicker is that it costs $300.
Michelin 2 Ton Low Profile High Lift Service Jack | Canadian Tire (http://www.canadiantire.ca/en/pdp/michelin-2-ton-low-profile-high-lift-service-jack-0091052p.html#.VSaZW_CiA9h)

I gave up doing my own oil changes on my EF when I switched over to a B18 (lower oil filter position). With the tools I have on hand (low-pro jack and jack stands), there isn't enough clearance to torque off the oil filter. My elbow was on the floor and I could still touch the oil filter.

I felt like a T-Rex trying to open a jar of pickles, it just wasn't going to happen.


finally click on your links and its discontinue?$300 is not bad if it will last me 10+ years

[boibuddha]

If you click on different locations, some places still have it in stock. White rock and market crossing still did last time I checked

[J.C]

I have this from crappy tire

2-Ton Super Long Car Jack | Canadian Tire (http://www.canadiantire.ca/en/pdp/2-ton-super-long-car-jack-2991901p.html#.VSiQffk3fz8)

Very bright lol
Works fine on my genesis as long as I drive up on a piece of wood
No more jacking problems :fuckyea:

[kchan]

not what i bought - but my fiance got it for me from japan

limited edition recaro SP-GIII 100th year - only 100 made

https://scontent-sea.xx.fbcdn.net/hphotos-xta1/t31.0-8/11148539_10152680763887653_7419274395014222727_o.j pg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xpa1/t31.0-8/11080775_10152680770607653_787333045235650333_o.jp g
https://scontent-sea.xx.fbcdn.net/hphotos-xpf1/t31.0-8/11000500_10152680775382653_1061988004204180018_o.j pg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpt1/t31.0-8/1800102_10152680775962653_8360083156415058677_o.jp g

[jackp0t]

finally click on your links and its discontinue?$300 is not bad if it will last me 10+ years
Have patience young padawan that jack usually go on sale for 40% discount at 179$
There is an app for canadian tire you can download and with the product you like you can click "add to shopping list"
When they go on sale you will get notified its pretty awesome.

[multicartual]

Corvette Sawblades on my E36... soon!!!


http://i.imgur.com/DKDPNjH.jpg

[threezero]

Have patience young padawan that jack usually go on sale for 40% discount at 179$
There is an app for canadian tire you can download and with the product you like you can click "add to shopping list"
When they go on sale you will get notified its pretty awesome.

You can't add discontinue item to shopping list and there is like only 1 left in the whole gva lol does that mean it won't go on sale now? :(

[asian_XL]

Corvette Sawblades on my E36... soon!!!


it makes your car uglier.
http://36.media.tumblr.com/ede583d0440429ed70d26bcd0b094665/tumblr_ndrc3jWQpJ1tmsitko1_1280.jpg

[multicartual]

it makes your car uglier.


Maybe to kids who have zero style :)


Besides... mine is a 4 door! I think it makes a difference and looks better on the sedan.


http://i45.tinypic.com/2iauamt.jpg


http://sphotos-c.ak.fbcdn.net/hphotos-ak-snc6/174918_535632336454256_253312301_o.jpg


Will totally work with my mullet, skinny jeans and Diesel clothing

[dared3vil0]

^ As long as you don't stretch the rear tire like that blue coupe it might not look bad.

[westopher]

They look good with the right tire sizes IMO. Especially on Non-M cars. I don't like heavily modified M-cars unless they are all out track rats.

[Gucci Mane]

:facepalm:

[hud 91gt]

Not my cup of tea, but I think it suits it pretty well.

[MindBomber]

BMW Chassis. Ford Drivetrain. Chevy wheels. You have quite the eclectic approach to your car..

[meme405]

BMW Chassis. Ford Drivetrain. Chevy wheels. You have quite the eclectic approach to your car..

Now just to tack on some tow mirrors from a cummins...

:troll:

[multicartual]

Now just to tack on some tow mirrors from a cummins...

:troll:


How about the turbo instead... ;)

[Korrax]

Just mounted some of these bad boys..

https://lh6.googleusercontent.com/-KVqPy9iapBI/VSs3hBrmiyI/AAAAAAAARwg/aQrepAqE90g/w1189-h883-no/IMG_20150412_200709.jpg

https://lh4.googleusercontent.com/-H_shkAtlhAw/VSs3gfxqt8I/AAAAAAAARwc/GUbp8mAlmVU/w1172-h883-no/IMG_20150412_200910.jpg

Square set up

[Geoc]

BMW Chassis. Ford Drivetrain. Chevy wheels. You have quite the eclectic approach to your car..

His name is multicartual after all

[i-vtecyo]

I bought a pair of euro amber turn signals as they are on its way and I am not sure if i should slightly modify my bumper to fit them because I cant decide which looks better. Help me decide if i should stick with clear or amber! here is a crappy paint edit of the comparison.

http://i65.photobucket.com/albums/h213/69xchange/euro%20amber_zpszgjsuu0w.png

[multicartual]

His name is multicartual after all


The slave cylinder on my car is from a '81 Datsun 280z non-turbo, only one that fits perfectly

[multicartual]

Help me decide if i should stick with clear or amber! here is a crappy paint edit of the comparison.

It would look cooler if the amber were in the middle, p.s. that up, I bet it would look interesting

[jpark]

idn what the hell you guys are talking about. Corvette sawblades are sick

[asian_XL]

I bought a pair of euro amber turn signals as they are on its way and I am not sure if i should slightly modify my bumper to fit them because I cant decide which looks better. Help me decide if i should stick with clear or amber! here is a crappy paint edit of the comparison.

http://i65.photobucket.com/albums/h213/69xchange/euro%20amber_zpszgjsuu0w.png


too bored at home...messed it around with PS :hotbaby:

http://www.pixentral.com/pics/1BbHXO95VYwx40BWbBaWhlb1lt7eW.jpg

[Simplex123]

Just bought these Eibach sway bars online for the e36

http://www.dasautosport.com/khxc/media/ecom/prodlg/eibach_antiroll_lg.jpg

[Z3guy]

it makes your car uglier.
http://36.media.tumblr.com/ede583d0440429ed70d26bcd0b094665/tumblr_ndrc3jWQpJ1tmsitko1_1280.jpg

I actually think they look very good and unique. C'mon man, if you put a AC Schnitzer or RD centre cap on them, everyone would think they look awesome.

[crew08]

24490
Changing it up with new wheels
From work wheels to Leon hardiritt.

[asian_XL]

I don't know. People put weird wheels on e36

http://farm5.static.flickr.com/4066/4618364790_7638a9434e_o.jpg
http://www.jdmeuro.com/wp-content/uploads/2013/04/BBS_RS_Turbofans_BMW_M_Coupe_01.jpg
https://s-media-cache-ak0.pinimg.com/736x/c6/de/c4/c6dec4d4019800245961c5cb03c663df.jpg

[Z3guy]

^ I think all three of the E36's above look really kool and unique, especially the M3.

[multicartual]

^ I think all three of the E36's above look really kool and unique, especially the M3.


Yeah WOW those all look siiiiiick!!!

[dinfung]

[QUOTE=asian_XL;8623329]I don't know. People put weird wheels on e36

http://www.jdmeuro.com/wp-content/uploads/2013/04/BBS_RS_Turbofans_BMW_M_Coupe_01.jpg

some how I really like the look of this M Coupe

[multicartual]

Yes that looks sick sick sick!!!

[Z3guy]

I don't know. People put weird wheels on e36

http://farm5.static.flickr.com/4066/4618364790_7638a9434e_o.jpg
http://www.jdmeuro.com/wp-content/uploads/2013/04/BBS_RS_Turbofans_BMW_M_Coupe_01.jpg
https://s-media-cache-ak0.pinimg.com/736x/c6/de/c4/c6dec4d4019800245961c5cb03c663df.jpg

I can't stop looking at that z3 m coupe! It looks so smooth and clean. It looks so good it is borderline ugly!

Westopher, you got one of the nicest e36 m3 locally, but those wheels and stance on this e36 m3 is drool worthy

[PuYang]

Nothing as hardcore as most people in this thread!

M12x1.25 thread die to thread my threadless shifter shaft (Waiting on my Blox 490 NeoChrome Shift knob to arrive!)

and RokBlokz Rally style Mudflaps! ....bcuz rally car...

[asian_XL]

whatever you like.
http://www.jdmeuro.com/wp-content/uploads/2012/08/BMW_E36_OZ_Breyton_03.jpg
http://www.pixentral.com/pics/1HDlVGVEbOaibCAsasvqYJRnxT0a70.jpg
[/img]
http://www.pixentral.com/pics/1mLYqP9LxWvDU9kkmvzoojPc4X79H.jpg

[!Aznboi128]

One of my fav

http://www.speedhunters.com/wp-content/uploads/2015/04/Offset-Kings-Long-Beach-15-91-copy-800x533.jpg

[Z3guy]

whatever you like.
http://www.jdmeuro.com/wp-content/uploads/2012/08/BMW_E36_OZ_Breyton_03.jpg
http://www.pixentral.com/pics/1HDlVGVEbOaibCAsasvqYJRnxT0a70.jpg
[/img]
http://www.pixentral.com/pics/1mLYqP9LxWvDU9kkmvzoojPc4X79H.jpg

Asian XL, you made your point, these sets of E36 wheels are not very attractive:heckno:

[jing]

http://i42.photobucket.com/albums/e326/aarrow1983/Mobile%20Uploads/IMG_2753_zps9c85013d.jpg

Was going to build a budget DIY coilover setup with Bilstein shocks etc but for a little more money and a whole lot less headache in choosing parts, I finally pulled the trigger after a year of riding 4x4 and much contemplation

[Leung_Dog]

Fancy steering coupler for mad handles YO!
24600

[freakshow]

Just got new tires mounted at Costco on the e36..

they sure know how to make you feel special! :blush:
https://dl.dropboxusercontent.com/u/1702713/Hosted/RS/E36/costco.jpg

[yray]

on the other side "PS: I warmed up the wheels for you xoxoxoxo" :troll:

[320icar]

Just got new tires mounted at Costco on the e36..

they sure know how to make you feel special! :blush:
https://dl.dropboxusercontent.com/u/1702713/Hosted/RS/E36/costco.jpg

Dude. That was me <3

[meme405]

Dude. That was me <3

How I just pictured 320icar:

:hay:

[freakshow]

Dude. That was me <3haha, nice! thanks man!:mamoru:

[J.C]

That's cute
:troll:

[westopher]

One of my fav

http://www.speedhunters.com/wp-content/uploads/2015/04/Offset-Kings-Long-Beach-15-91-copy-800x533.jpg
That car looks killer. Love the wheel choice, but wish it was higher.

I can't stop looking at that z3 m coupe! It looks so smooth and clean. It looks so good it is borderline ugly!

Westopher, you got one of the nicest e36 m3 locally, but those wheels and stance on this e36 m3 is drool worthy
The M coupe, has turbofans bolted on it. Underneath is a set of RS's if my memory serves me right. As for that black one..... Shitty eBay wing, and too stanced to drive. Kinda takes away the point of getting an M-car.
Heres a substantially more functional and awesome e36 with the same wheels.
http://img.photobucket.com/albums/v513/busterhax/0DD5114F-65BE-4E1A-AA14-501D558F7463_zpsmmgrumgi.jpg

[J.C]

bought a new oem bumper and fender liners
and might be selling headlights and getting another set built

[knight604]

:gay:

[jackp0t]

7 litres of oil, 1 jug of coolant, oil filter, oil cooler gasket , oil filter housing gasket = 200$ :( not excited with that bmw tax lol

http://i1178.photobucket.com/albums/x374/jackp0t_/20150422_165816.jpg (http://s1178.photobucket.com/user/jackp0t_/media/20150422_165816.jpg.html)

Anybody work at bmw need that discount :concentrate:

[dared3vil0]

http://i738.photobucket.com/albums/xx27/dared3vil0/Mobile%20Uploads/IMG_6927_zps74742a7b.png?t=1429843469

[granemo]

Spoon N1 :toot:
http://i.imgur.com/WeKydwB.jpg

[fliptuner]

After my engine swap, the upper rad port is on the wrong side. To modify the port to the correct side was half the price of a nice, new Koyo, so might as well upgrade. Half the weight, twice the cooling.

+1 for the guys at Garage5. Same price as Ebay sellers, without going to the States and quick turnaround for an oddball part.

http://i.imgur.com/FJCfK3b.jpg?2

[hud 91gt]

Why do I have a feeling this is going to be a really bad idea??

[fliptuner]

Did you just buy that? If so, return it and use mine.

I just tore it down after I took my motor off it and it's exactly the same but obviously, not as clean.
Pretty sure I have bolts that are the same size as your block-> bellhousing but longer.

[hud 91gt]

haha, damn! Craigslist purchase! Thanks for the offer though. A little time pressure of having someone else's stand probably would have been good for me though. ha


Edit: Just saw the comment about the bolts. I have to take a look at my block a little closer to see where this will bolt up. I think they were M10 1.5. Length? I don't have a clue, but I do know the top bolts need to be a bit shorter then the bottom. I guess some washers could take up the slack.

[fliptuner]

haha, damn! Craigslist purchase! Thanks for the offer though. A little time pressure of having someone else's stand probably would have been good for me though. ha

Except I won't need it for a really long time lol

Plus, I only put stuff on stands while I'm actually working on them. Spares get strapped onto wheel dollies so I can push them around the garage, since they take up less space.

[jackp0t]

got some aero to make it not so stock looking
http://i1178.photobucket.com/albums/x374/jackp0t_/Mobile%20Uploads/20150425_183951.jpg (http://s1178.photobucket.com/user/jackp0t_/media/Mobile%20Uploads/20150425_183951.jpg.html)

coils
http://i1178.photobucket.com/albums/x374/jackp0t_/Mobile%20Uploads/att_143011601522591.jpeg (http://s1178.photobucket.com/user/jackp0t_/media/Mobile%20Uploads/att_143011601522591.jpeg.html)

Impulse buy on this one FailFish
Blackline Led tails
https://encrypted-tbn3.gstatic.com/images?q=tbn:ANd9GcTxODmHVpSHgfqJ6I2R1NHXxgZqVNvU1 eSGPLljg5lL21D7SGmoHg

led vs stock tails
https://i1.ytimg.com/vi/_N3hoI0QHb0/hqdefault.jpg

Its probably gonna take 1 month from germany .oh wells

[underscore]

Head gasket, head studs, rod hardware, piston rings, pistons, bearings and all the machine shop work to go with it, ugh.

[fliptuner]

Said "fuck it" and went all out, eh?

[underscore]

Yep, the only gasket that hadn't been removed was the headgasket. 180k isn't that high for a Toyota but I don't want to have to worry about it again for a long time.

Head gasket will be from HKS or TRD (depends how much they need to shave), studs and rod hardware from ARP, pistons will be either Wiseco/CP or the originals depending on the machine work. I think I might be able to get away without boring out the cylinders but my mechanic isn't so sure.

[fliptuner]

I picked up an adjustable fan controller and probe. No more relays!!!

Also got my seat mounts, a clutch line bracket, fan mounting brackets and a cover for my trans tunnel after I went from auto to manual.


Some assembly required
:badpokerface:
http://i.imgur.com/Gl9wIVx.jpg?1

[Energy]

Impulse buy on this one FailFish
Blackline Led tails
https://encrypted-tbn3.gstatic.com/images?q=tbn:ANd9GcTxODmHVpSHgfqJ6I2R1NHXxgZqVNvU1 eSGPLljg5lL21D7SGmoHg

led vs stock tails
https://i1.ytimg.com/vi/_N3hoI0QHb0/hqdefault.jpg

Its probably gonna take 1 month from germany .oh wells

LCI taillights take 5 years off your car's age.

[dared3vil0]

Rotors arrived!


http://i738.photobucket.com/albums/xx27/dared3vil0/Mobile%20Uploads/IMG_6938_zps30dc9453.jpg?t=1430364576

[kakucaekz]

Yep, the only gasket that hadn't been removed was the headgasket. 180k isn't that high for a Toyota but I don't want to have to worry about it again for a long time.

Head gasket will be from HKS or TRD (depends how much they need to shave), studs and rod hardware from ARP, pistons will be either Wiseco/CP or the originals depending on the machine work. I think I might be able to get away without boring out the cylinders but my mechanic isn't so sure.

What'd you do to your engine? Rebuilding it for preventative measures or did you damage it? Anyhow, I'm rocking the Cometic HG, Wiseco pistons and ARP hardware; it's held up well so far. Would recommend. :bigthumb:

[hud 91gt]

I picked up an adjustable fan controller and probe. No more relays!!!

Also got my seat mounts, a clutch line bracket, fan mounting brackets and a cover for my trans tunnel after I went from auto to manual.


Some assembly required
:badpokerface:
http://i.imgur.com/Gl9wIVx.jpg?1
What fan controller? I'm rocking a radiator probe on relay for the time being until I tap one into my thermostat housing. I had a fixed temp style in there but turned on too late, still playing with the new adjustable unit. Hopefully it works out.

[underscore]

What'd you do to your engine? Rebuilding it for preventative measures or did you damage it? Anyhow, I'm rocking the Cometic HG, Wiseco pistons and ARP hardware; it's held up well so far. Would recommend. :bigthumb:

I didn't do anything, but it had to come out for the power steering system to get rebuilt and it snowballed from there since it's so much work to pull the motor. I'm really hoping that somehow the block just needs a hone and I can reuse the rotating assembly but I'm not getting my hopes up.

[jackp0t]

LCI taillights take 5 years off your car's age.

One of the reason why i pulled the trigger!

[kakucaekz]

I didn't do anything, but it had to come out for the power steering system to get rebuilt and it snowballed from there since it's so much work to pull the motor. I'm really hoping that somehow the block just needs a hone and I can reuse the rotating assembly but I'm not getting my hopes up.

Lol I see, the "Might as well" part has taken over, haha. For 180k km, the crank should be fine, maybe a little machining but reusable nonetheless.

Your 3S should be a gen 2, right? Buy some 3rd gen 3SGTE cams; it's a little bump in low end torque that's pretty cheap, and OEM reliable. I got mine used out of a JDM clip with less than 80k km on it for $100 shipped. :D

[fliptuner]

What fan controller? I'm rocking a radiator probe on relay for the time being until I tap one into my thermostat housing. I had a fixed temp style in there but turned on too late, still playing with the new adjustable unit. Hopefully it works out.

It's A Flex A Lite variable speed controller. It basically starts at 60% and ramps up as needed. I got a skookum deal on it, otherwise I would've sprung for the DCC (Delta Current Control) FK-45, which a lot of people swear by.

Flex-a-lite Variable Speed Control System | JEG'S High Performance (http://www.jegs.com/shop/ProductDisplay?storeId=10001&catalogId=116102&partNumber=400-31163&langId=)
Constant Temperature Controllers and Accessories (http://www.dccontrol.com/constant_temperature_controllers.htm)

Before you drill/tap the t-stat housing, have you considered a rad hose adapter? You can get them from $7-$40 and since the bungs are already imperial, at most you'll need a thread reducer for the sensor.
Radiator Hose Adapter | eBay (http://www.ebay.com/bhp/radiator-hose-adapter)

In terms of your fan turning on late, is the probe closer to the in or outlet?

[underscore]

Lol I see, the "Might as well" part has taken over, haha. For 180k km, the crank should be fine, maybe a little machining but reusable nonetheless.

Your 3S should be a gen 2, right? Buy some 3rd gen 3SGTE cams; it's a little bump in low end torque that's pretty cheap, and OEM reliable. I got mine used out of a JDM clip with less than 80k km on it for $100 shipped. :D

I'm one step ahead of you, I've had some gen 3 cams sitting here for the past year haha. Did you stick with the gen 2 shim system or did you go to 1zz shimless buckets?

[hud 91gt]

It's A Flex A Lite variable speed controller. It basically starts at 60% and ramps up as needed. I got a skookum deal on it, otherwise I would've sprung for the DCC (Delta Current Control) FK-45, which a lot of people swear by.

Flex-a-lite Variable Speed Control System | JEG'S High Performance (http://www.jegs.com/shop/ProductDisplay?storeId=10001&catalogId=116102&partNumber=400-31163&langId=)
Constant Temperature Controllers and Accessories (http://www.dccontrol.com/constant_temperature_controllers.htm)

Before you drill/tap the t-stat housing, have you considered a rad hose adapter? You can get them from $7-$40 and since the bungs are already imperial, at most you'll need a thread reducer for the sensor.
Radiator Hose Adapter | eBay (http://www.ebay.com/bhp/radiator-hose-adapter)

In terms of your fan turning on late, is the probe closer to the in or outlet?
I wish I had done more research when I put my fans in. Second thought, I wish I had kept my mechanical fan. haha.

The temterature probe is directly below the inlet. When I use my laser thermo, the fan wasn't turning on until over 200 degrees (It was a 180 degree setup). Which is why I now have an adjustable unit. Still adjusting it to come on at the proper time though. As for the thermostat housing, my new motor has a bunch of extra bungs from either emissions systems, or fuel inject or who knows. I won't be using them, so putting the probe there should work out nicely. I just read about those radiator necks literally last week. That should have been my plan A!

[fliptuner]

I have 1 5/8" between my rad and the waterpump snout, so necessity dictated the need to go electric and have to use a pusher. The upper rad hose is so short and curvy that I can't even use a hose adapter and have to find a useable port on the side of the block.
:okay:

Lol, at least you have a lot of options.

[smoothie.]

I have 1 5/8" between my rad and the waterpump

:whistle:

[fliptuner]

Step up ur troll game pls.

[kakucaekz]

I'm one step ahead of you, I've had some gen 3 cams sitting here for the past year haha. Did you stick with the gen 2 shim system or did you go to 1zz shimless buckets?

I would've liked to go to the shimless buckets, but ran out of time and money and stuck to stock shims. =\

[CCA-Dave]

I have 1 5/8" between my rad and the waterpump snout, so necessity dictated the need to go electric and have to use a pusher. The upper rad hose is so short and curvy that I can't even use a hose adapter and have to find a useable port on the side of the block.
:okay:

Lol, at least you have a lot of options.

What are you using for a radiator? Pulling your fan controller temperature off the block is _far_ from ideal. You want to be as close to the radiator outlet as possible.

-Dave

[fliptuner]

2 core aluminum.

There's a port under the thermostat that Y's off to the bypass and heater core. I'll see if I can make it a 3 way for the switch. I want to avoid tapping into the thermostat housing if at all possible.

[pintoBC_3sgte]

I didn't do anything, but it had to come out for the power steering system to get rebuilt and it snowballed from there since it's so much work to pull the motor. I'm really hoping that somehow the block just needs a hone and I can reuse the rotating assembly but I'm not getting my hopes up.

You have a power steering leak like all celicas I assume? Find out from where ?? I have my celica going in to get both cv axles replaced and my power steering leak hopefully fixed. Few other minor maintenance things as well.

[underscore]

It was leaking from literally every hose and the pump, I used some tracer dye hoping it was just a single hose but everything lit up like a Christmas tree.

[KDMofo]

Due for some Maintenance this weekend.

http://i.imgur.com/ARcAhPy.jpg (http://imgur.com/ARcAhPy)

[RonaldTypeR]

Installed a few parts for my interior this past weekend..

http://i14.photobucket.com/albums/a305/Ronald_Type-R/My%20Domani/RR20150504_IMG_3638%20copy_zpshh4cl1so.jpg~origina l

http://i14.photobucket.com/albums/a305/Ronald_Type-R/My%20Domani/RR20150504_IMG_3640%20copy_zpstkskj2s1.jpg~origina l

http://i14.photobucket.com/albums/a305/Ronald_Type-R/My%20Domani/RR20150504_IMG_3667%20copy_zpsrfaflkom.jpg~origina l

[Lowered_Klass]

^ Makes me miss my old EL :(

Sold it for far too cheap, with too many goodies still on it. Including oem Domani fog lights.

Nice to see someone showing some proper love to this gen EL

[jackp0t]

Impulse buy on this one FailFish
Blackline Led tails
https://encrypted-tbn3.gstatic.com/images?q=tbn:ANd9GcTxODmHVpSHgfqJ6I2R1NHXxgZqVNvU1 eSGPLljg5lL21D7SGmoHg

led vs stock tails
https://i1.ytimg.com/vi/_N3hoI0QHb0/hqdefault.jpg

Its probably gonna take 1 month from germany .oh wells

Still not shipped :fuuuuu:
In the meantime sourced a more aggressive rear diffuser

stock
http://i1178.photobucket.com/albums/x374/jackp0t_/Mobile%20Uploads/IMG_20150508_013040.jpg (http://s1178.photobucket.com/user/jackp0t_/media/Mobile%20Uploads/IMG_20150508_013040.jpg.html)

Rieger
http://farm3.staticflickr.com/2892/8811640089_435a5aa824_b.jpg

http://cdn3.volusion.com/fncy3.yonz6/v/vspfiles/photos/88024-2.jpg?1366618504



Should arrive this coming week :toot:

[knight604]

Bye bye resonator ..

Hello Xpipe

http://www.turnermotorsport.com/image/Intake_Exhaust/ss/786813_lg.jpg

[Flatsix]

Installed led's in the interior, front and in the trunk
http://i.imgur.com/afBPVDk.jpg

http://i.imgur.com/7f7JDo7.jpg
http://i.imgur.com/BBinZs4.jpg
http://i.imgur.com/SAeiwgI.jpg
http://986forum.com/forums/uploads01/IMG_77411422689448.jpg

[jackp0t]

Picked it up at the border couldn't wait any longer.lol
http://i1178.photobucket.com/albums/x374/jackp0t_/Mobile%20Uploads/20150512_183119.jpg (http://s1178.photobucket.com/user/jackp0t_/media/Mobile%20Uploads/20150512_183119.jpg.html)

:fuuuuu:Instruction is in german
http://i1178.photobucket.com/albums/x374/jackp0t_/Mobile%20Uploads/20150512_184259.jpg (http://s1178.photobucket.com/user/jackp0t_/media/Mobile%20Uploads/20150512_184259.jpg.html)
Any one speak german :badpokerface:

Got lucky and found a bmw performance gloss black kidney grille's
http://i1178.photobucket.com/albums/x374/jackp0t_/Mobile%20Uploads/20150512_182330_1.jpg (http://s1178.photobucket.com/user/jackp0t_/media/Mobile%20Uploads/20150512_182330_1.jpg.html)
I guess i wont be able to showcase my stock plasti dip one :lawl:

Also ordered the BMS oil catch can to stop/reduce the carbon build up.
Should buy me enough time until i do the walnut blast cleaning after the summer
http://www.burgertuning.com/images/oil_catch_can_BMW/BMW_OIL_CATCH_CAN.jpg

[meme405]

http://i149.photobucket.com/albums/s52/meme405/unnamed_zps7mnrmsqr.jpg (http://s149.photobucket.com/user/meme405/media/unnamed_zps7mnrmsqr.jpg.html)

Pictures from the factory. I can't wait to get these in my hands and on the car.

[dared3vil0]

[URL=http://s149.photobucket.com/user/meme405/media/unnamed_zps7mnrmsqr.jpg.html]

Pictures from the factory. I can't wait to get these in my hands and on the car.

So these are the calipers with eleventy billion pistons right...?


:troll: :lawl:

[meme405]

So these are the calipers with eleventy billion pistons right...?


:troll: :lawl:

Those are actually only the rear calipers. The front ones are even bigger...:awwyeah:

[jdmfemme]

I just got the call that my Meisters S1's finally arrived from Japan.

LOUD NOISES

[Akinari]

Converting a bunch of exterior lights to LEDs. Rear signals already done with 80w amber Crees, got some VLED HP amber flanks for the side markers/signals, and brighter Cree 7.5w reverse bulbs to replace some old crappy single projector LEDs. Thinking about converting the front signals as well but the stock amber lens is still inside the housing and I'm too lazy to bake my headlights to remove them :derp:

http://i.ebayimg.com/00/s/OTYwWDk2MA==/z/UUIAAOxygj5Seaup/$(KGrHqMOKpIFJ30nYMeqBSe,upR4mw~~60_57.JPG
http://www.vleds.com/media/catalog/product/cache/1/imageBig/900x/17f82f742ffe127f42dca9de82fb58b1/1/9/194_4_hpf_a1.jpg

[J.C]

holy hell 80w
my running light is 7w and it's already stupidly bright

[Akinari]

holy hell 80w
my running light is 7w and it's already stupidly bright
Well it's eBay so I'd take the wattage ratings with a grain of salt :derp: however they are insanely bright though, much brighter than any of the usual LEDs and a smidge brighter than incandescents.

[LP700-4]

VLED Tritons ftw. Still nothing I've seen are brighter than those.

[tastic]

VLED Tritons ftw. Still nothing I've seen are brighter than those.


Yup...got them on all corners on the mazda (switchback fronts as my DRL) and you can see that chit from space. They are the only ones that still come through with direct mid day sun shining on them.

[trollguy]

http://i149.photobucket.com/albums/s52/meme405/unnamed_zps7mnrmsqr.jpg (http://s149.photobucket.com/user/meme405/media/unnamed_zps7mnrmsqr.jpg.html)

Pictures from the factory. I can't wait to get these in my hands and on the car.

you can buy a Kids on Board sign now! :whistle:

[Vulgate]

Inspiration from seeing all you DIYs, especially Jackp0t, only because we have same car, lead me to buying this. 2 oil changes.
Now, I need to find a oil filter wrench cap

[hud 91gt]

First oil change Vulgar? You shouldnt need a wrench. If it's really stuck, stab it's with a screwdriver and take it off that way.

An alternative is one of those strap wrench things. Can be used to loosen a filter as well as many other things. Might as well get a do it all tool then something you may only use once.

[77civic1200]

^ Its a BMW, it uses a cartridge style filter

[hud 91gt]

Funny how you forget so fast. Sold my Bimmer 4 months ago :p but my filter house just had a large bolt on top to loosen in.

[godwin]

36MM socket from Princess Auto $12 (http://www.princessauto.com/en/detail/36-mm-x-3-4-in-dr-shallow-socket/A-p8035370e)

Since you have so many small bottles get a rectangular spout.. it is less messy and you can drain your bottles completely.

Inspiration from seeing all you DIYs, especially Jackp0t, only because we have same car, lead me to buying this. 2 oil changes.
Now, I need to find a oil filter wrench cap

[dared3vil0]

http://i738.photobucket.com/albums/xx27/dared3vil0/Mobile%20Uploads/IMG_7026_zpsb6cdfcf5.jpg?t=1432352539

[jackp0t]

Inspiration from seeing all you DIYs, especially Jackp0t, only because we have same car, lead me to buying this. 2 oil changes.
Now, I need to find a oil filter wrench cap

haha thanks!
No one is gonna put the care on your car like you would.
It doesn't matter if the tech/shop has alot of experience that doesn't mean they will be careful with your car.
9/10 if they mess up something on your car and you dont know a lick shit about cars they will take advantage of that.


Man i was eying that sweet deal on craigslist! Congrats
And you dont need the oil filter wrench you should be able to turn it with your hands. If you cant let the car warm up and try again.
It should only be hand tight the oil filter really

[Vulgate]

First oil change Vulgar? You shouldnt need a wrench. If it's really stuck, stab it's with a screwdriver and take it off that way.

An alternative is one of those strap wrench things. Can be used to loosen a filter as well as many other things. Might as well get a do it all tool then something you may only use once.


Haha, no sir, not first time doing oil change; but.. it will be first time on the 135. The thing is my car is still on the BMW free maintenance but this is my 4th year expiring in Aug and the car is telling me I don't have to change oil until next summer, but by then I will not have free oil change anymore. It is stupidly long. Then seeing Jackp0t work on his car, I just pull myself together to do the oil change now. I doubt they will change the oil for free in Aug for me.

I just order a CTA cap wrench from amazon.ca, which I think is cheaper than amazon.com




36MM socket from Princess Auto $12 (http://www.princessauto.com/en/detail/36-mm-x-3-4-in-dr-shallow-socket/A-p8035370e)

Since you have so many small bottles get a rectangular spout.. it is less messy and you can drain your bottles completely.

What is the 36MM socket for? I read a few instructions and watched a few youtude videos, and none mentioned a 36mm socket. Is it for the N54/N55 engine?





haha thanks!
No one is gonna put the care on your car like you would.
It doesn't matter if the tech/shop has alot of experience that doesn't mean they will be careful with your car.
9/10 if they mess up something on your car and you dont know a lick shit about cars they will take advantage of that.


Man i was eying that sweet deal on craigslist! Congrats
And you dont need the oil filter wrench you should be able to turn it with your hands. If you cant let the car warm up and try again.
It should only be hand tight the oil filter really

So very true, it's stupid how a shop can mess up an easy job. Unfortunately I have to juggle how much time I have verses paying someone to do the work. Luckily summer days are much longer, giving more time to do things after kids go to bed.

Yeah, I picked up the CL deal because I was just about to pick up the oil from the states (btw, Walmart, in the States, carries the Mobil European LL-01 oil for $26/gallon only). What he offered was a very good deal, so why not. :)

[Akinari]

VLED Tritons ftw. Still nothing I've seen are brighter than those.

Yup...got them on all corners on the mazda (switchback fronts as my DRL) and you can see that chit from space. They are the only ones that still come through with direct mid day sun shining on them.
My 80w Cree rear signals are surprisingly bright, can still see them in direct sunlight rather well!

And the VLED side firing LEDs for my side markers are insanely bright for how small they are as well.

Also this. Going catless :megusta: will just need to get a custom fab test pipe.

http://crackedupracing.com/images/kbh-421-409_01.jpg

[Lowered_Klass]

^ Or you could pick up an adjustable test pipe? Like a BWR or Blox...

Depending on where you go, or if you have a hook up at an exhaust shop/etc, the adjustable one might end up being a bit cheaper...

[jackp0t]

http://www.quickmeme.com/img/45/4515147cbd774c8af480405cbc8642d8f02d2a305cd1f2e73a 3202675be1157f.jpg

After 30 days (i called it too.lol!)
http://i1178.photobucket.com/albums/x374/jackp0t_/Mobile%20Uploads/20150525_105544.jpg (http://s1178.photobucket.com/user/jackp0t_/media/Mobile%20Uploads/20150525_105544.jpg.html)

[Akinari]

^ Or you could pick up an adjustable test pipe? Like a BWR or Blox...

Depending on where you go, or if you have a hook up at an exhaust shop/etc, the adjustable one might end up being a bit cheaper...

I was quoted around 3-4 hours for the header install and test pipe fab.

[trollguy]

why

[Akinari]

^ Or you could pick up an adjustable test pipe? Like a BWR or Blox...

Depending on where you go, or if you have a hook up at an exhaust shop/etc, the adjustable one might end up being a bit cheaper...
Both the BWR and Blox adjustable test pipes are for the old D/H/B series engines with the donut style flange, not for the 3 bolt flange for K series engines. Nothing like that exists for K series engines.

why

Why not?

[Lowered_Klass]

Hmm, you would think they would have something for the K exhausts at this point.

Oh well, that sounds pretty fair for install and fab.

[Akinari]

Well, there isn't a need to have an adjustable test pipe made for K motors really because race headers already delete the cat and just have the catback bolt onto the end of it, whereas I'm using sort of a universal K swap K-Tuned header in a car that has a longer exhaust setup than most, so I still need to install a test pipe to replace the cat or extend the catback up to the header :derp:

[knight604]

fuck just spent a bucket full of dough..

http://i795.photobucket.com/albums/yy235/AdamBaj/Parts%20for%20sale/IMG_20141003_113824671_zps0jro09pp.jpg
http://c1552172.r72.cf0.rackcdn.com/596708_x600.jpg
http://i212.photobucket.com/albums/cc6/Eurofreaks/Exotics%20Tuning/E39%20M%20Rear%20diffuser/IMG_3064-1.jpg



SUSPENSION IS NEXT

[smokinloc]

hey akinari, I just had a catback system and Megan test pipe installed on my 05 acura TSX W/ k24, if it uses the same weird 3 bolt flange for the header then you might be able to use the same test pipe I did. the Megan racing test pipe is meant for 02-08 accords with a k24 but I just had to shorten it about 1" to make it work

[PandaDog]

Purchased pretty minty Del Sol seats for the VX
I love the pattern on it, never seen it before

https://lh6.googleusercontent.com/-QqTC_iNdnb8/VWVDFrdXTrI/AAAAAAAASxQ/Qgc1PVnuIY0/w619-h835-no/IMG_20150526_185517.jpg

[jasonturbo]

Purchased pretty minty Del Sol seats for the VX
I love the pattern on it, never seen it before

96-97 Del Sol seats daaaaawwwgggggg

I haven't technically bought anything for my car yet.. though I did order a new car!

2016 Golf R 6MT Non-Tech Lapiz Blue

http://i129.photobucket.com/albums/p216/mjp_photo_album/Golf%207R/5Medium_zpsf9bda1bb.png

Will lower it on wheels, decided on 18" OZ Superturismo's in matte graphite for winter... still looking for summers, I hate the OEM Cadiz wheels. (Hence why I stole someones pic with OZ's)

If I have to settle with having one car for a while it might as well be AWD and a little quicker than my current GTI :)

Arrives early Aug - pissed that sunroof is not yet an option.. then again, loaded with DSG, Tech, and Sunroof the car would be almost 50K like WTF, it's a golf

[meme405]

96-97 Del Sol seats daaaaawwwgggggg

I haven't technically bought anything for my car yet.. though I did order a new car!

2016 Golf R 6MT Non-Tech Lapiz Blue

http://i129.photobucket.com/albums/p216/mjp_photo_album/Golf%207R/5Medium_zpsf9bda1bb.png

Will lower it on wheels, decided on 18" OZ Superturismo's in matte graphite for winter... still looking for summers, I hate the OEM Cadiz wheels. (Hence why I stole someones pic with OZ's)

If I have to settle with having one car for a while it might as well be AWD and a little quicker than my current GTI :)

Arrives early Aug - pissed that sunroof is not yet an option.. then again, loaded with DSG, Tech, and Sunroof the car would be almost 50K like WTF, it's a golf

Your honestly almost as bad as Tofu, except on a way more baller scale (no offense tofu). It's actually pretty epic...

[tofu1413]

:troll:

https://scontent-sjc2-1.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/11069894_10153016831846559_7066461021651237988_n.j pg?oh=0b38b998be76a34f1b3eded9d36cf35a&oe=55F13C17

Factory Porsche 964 Carrera RS Recaro SPG :troll:

https://scontent-sjc2-1.xx.fbcdn.net/hphotos-xta1/v/t1.0-9/11377159_10153015804886559_5639154070675943485_n.j pg?oh=60cb929ab2ffe16b3dc9a5fbec46636d&oe=55FC54B1

J's racing Intake duct.


:troll:

[Lowered_Klass]

^ And I thought I spent a lot of time at Garage Five :lol :D

[mb_]

http://i.imgur.com/5jAOXCO.jpg

Ferodo DS2500 Front + Rear, ATE Super Blue. Track day prep!!

[westopher]

Thats what I run as well. I hope your wheels are black, because if not, they will be after a block of driving.

[mb_]

The stock wheels are sort of black?!? Ken (911fanatic) applied Cquartz UK on them as well before I drove down the LA.

[underscore]

Just ordered an HDi electronic boost controller. Nothing super fancy but I didn't feel like spending 4x more just to get some useless features I don't need.

[RCubed]

http://i.imgur.com/aEpliT8.jpg
Ehehe

[CCA-Dave]

http://i.imgur.com/5jAOXCO.jpg

Ferodo DS2500 Front + Rear, ATE Super Blue. Track day prep!!

Good on you for buying local.

[extracrunchie]

fuck just spent a bucket full of dough..

http://i795.photobucket.com/albums/yy235/AdamBaj/Parts%20for%20sale/IMG_20141003_113824671_zps0jro09pp.jpg
http://c1552172.r72.cf0.rackcdn.com/596708_x600.jpg
http://i212.photobucket.com/albums/cc6/Eurofreaks/Exotics%20Tuning/E39%20M%20Rear%20diffuser/IMG_3064-1.jpg



SUSPENSION IS NEXT

I am in the same boat. Just bought JDM euro R headlights, flashpro with vittune, and r40 neo chromes...........

http://s12.postimg.org/xlvbi03kb/11258965_10206033466903117_779440058_n.jpg

https://c1.staticflickr.com/9/8810/18434897422_a06c0316c1_z.jpg

[fT-z33wor]

I know its not for a car, but I figured the suspension guys on here would appreciate this ;)

https://scontent-sea1-1.xx.fbcdn.net/hphotos-xtp1/v/t1.0-9/11046252_10153344973211474_842818942600326492_n.jp g?oh=00784f83d312184bd2b397fe4b390f9f&oe=56075C45
https://scontent-sea1-1.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/11051953_10153344994376474_5301917001144899480_n.j pg?oh=4d409c39b2315fcd404a43dd215412d9&oe=5606315A
https://scontent-sea1-1.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/10501912_10153356679296474_2558176214778986515_n.j pg?oh=f568dde4a0b47c1b758efd1d9c066e41&oe=55F3B422

[Matsuda]

http://i209.photobucket.com/albums/bb124/Matzuda/IMG_20150603_222500_edit_1433395519727_zpsnpfifn2x .jpg

[tofu1413]

I know its not for a car, but I figured the suspension guys on here would appreciate this ;)

https://scontent-sea1-1.xx.fbcdn.net/hphotos-xtp1/v/t1.0-9/11046252_10153344973211474_842818942600326492_n.jp g?oh=00784f83d312184bd2b397fe4b390f9f&oe=56075C45
https://scontent-sea1-1.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/11051953_10153344994376474_5301917001144899480_n.j pg?oh=4d409c39b2315fcd404a43dd215412d9&oe=5606315A
https://scontent-sea1-1.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/10501912_10153356679296474_2558176214778986515_n.j pg?oh=f568dde4a0b47c1b758efd1d9c066e41&oe=55F3B422


Still suspension porn :megusta:

[jing]

http://i209.photobucket.com/albums/bb124/Matzuda/IMG_20150603_222500_edit_1433395519727_zpsnpfifn2x .jpg


If your car came with the factory Nardi wheel and is in good shape, I'll take it off your hands !

[melloman]

http://i209.photobucket.com/albums/bb124/Matzuda/IMG_20150603_222500_edit_1433395519727_zpsnpfifn2x .jpg

And it begins...

http://img2.wikia.nocookie.net/__cb20140823174405/fossils-archeology/images/2/27/265681d1398449745t-what-whaa-positive-blackberry-mr-burns-excellent-1.jpg

[frito_lay]

I bought a new dashcam with the money i made from my go fund me campaign

[Flatsix]

New exhaust / secondary cat delete, about 19 more hp and combine 40 lbs off the car

http://i.imgur.com/fQkJS0n.jpg (http://imgur.com/fQkJS0n)

http://i.imgur.com/0wB9mFy.jpg (http://imgur.com/0wB9mFy)

[underscore]

I bought a new dashcam with the money i made from my go fund me campaign

Wait, what? Did I miss something?

[underscore]

Bought it an entry into the Heart of Darkness TSD rally in July :toot:

[68style]

Bought it an entry into the Heart of Darkness TSD rally in July :toot:



Have you done that before?? I rode with another (former) RS member as a timekeeper vehicle many years ago and thought it was a great event.

[Matsuda]

here's a better non potato photo

https://scontent-sea1-1.xx.fbcdn.net/hphotos-xtf1/t31.0-8/11423677_10153385188361212_5671370677148070783_o.j pg

[underscore]

Have you done that before?? I rode with another (former) RS member as a timekeeper vehicle many years ago and thought it was a great event.

We tried to do it last year but the first reg got trashed after the final test sweep but before the rally so we were forced to pull out after the first reg to prevent damage to the car. Because something like 1/4 of the cars DNF'd last year the organizers are being very careful with road selection and so on.

[RevYouUp]

Got some grids, anyone have some volks stickers for sale? :troll:

http://i.imgur.com/F6MYhfy.jpg

[Groot]

nice Folks bro

[Original BB1]

Tein CircuitMasters for the Type R

http://i.imgur.com/nMWA8In.jpg

http://i.imgur.com/PiXKVZx.jpg

[white rocket]

^^Whoa!! Those are serious business! Awesome stuff :thumbsup:

[Flatsix]

Short shifter for the boxster, 30% reduction

http://i.imgur.com/2RtlDOw.jpg (http://imgur.com/2RtlDOw)

[dared3vil0]

4" Axle exchange aluminum driveshaft has arrived!


http://i738.photobucket.com/albums/xx27/dared3vil0/Mobile%20Uploads/IMG_5771_zps53c3b29f.png?t=1434173181

[white rocket]

^^Would buy because of company logo. Ha!

[Retrac]

Finally received camshaft

http://i157.photobucket.com/albums/t73/2doped/IMG_20150614_224526.jpg

http://i157.photobucket.com/albums/t73/2doped/IMG_20150614_224415.jpg

[Klondike]

Dat amiibo collection :pokerface:

[Retrac]

Its an addiction really :badpokerface:

[GabAlmighty]

Just picked up a Seeker seat from my friend and just going to head down to Garage 5 to pick up a Buddy Club seat rail

https://scontent-sea1-1.xx.fbcdn.net/hphotos-xat1/t31.0-8/q84/s960x960/11537606_10155675264640004_7922363485810772700_o.j pg

[underscore]

Finally got my ACPT carbon fibre driveshaft and Blitz Spec NUR midpipe + axleback from Oroville. Removing nearly 30lbs from the drivetrain (16lbs vs 45) as well as the drag of the two support bearings should make a big difference.

[R. Mutt]

Muellerized Öhlins Road & Track

http://i.imgur.com/aYicPEm.png
http://i.imgur.com/6TQD19F.png

[bcrdukes]

^
Review on the Ohlins R&T, before and after, please. :sweetjesus:

[R. Mutt]

They go in Friday so I'll report back soon. I've ridden in a couple other cars with this setup though and it rides as good as stock Bilsteins on the MR spec, if not better.

[westopher]

Delivery from Poland today.

https://c1.staticflickr.com/1/406/19278844656_39c9b71879_b.jpg (https://flic.kr/p/vnB7Ro)Untitled (https://flic.kr/p/vnB7Ro) by Chris West (https://www.flickr.com/photos/westophervan/), on Flickr
https://c1.staticflickr.com/1/283/19117289770_8c05871793_b.jpg (https://flic.kr/p/v8k7dj)Untitled (https://flic.kr/p/v8k7dj) by Chris West (https://www.flickr.com/photos/westophervan/), on Flickr

[Suprarz666]

http://i62.tinypic.com/fmtefa.jpg