[oldsnail]

I got a loyalty rate of 1% off.
Last 3 cars were Honda

sigh, they said if my current cars are still in finance/ lease i can get a loyalty.

[bomberR17]

I got a loyalty rate of 1% off.
Last 3 cars were Honda

Did you had a current loan with Honda? Seems like oldsnail couldn't get it due to not having current loan. I still have my Honda loan open but I was going to pay it off before getting the CTR. I was reading that they consider loan within last 365 days.

EDIT: To answer my own question as my SA replied back to me. I will get 1% loyalty off the current rate of when I take possession of the car so it's not too bad. Just have to hope the financing rate doesn't increase when my car arrives next year.

[bomberR17]

sigh, they said if my current cars are still in finance/ lease i can get a loyalty.

If you had a loan within 365 days before purchase, you would've qualified according to Honda rep.

[OriginalJC]

Yes had current honda financing when I got the loyalty rate.

[OEMSiR]

some pros done it again

[320icar]

Taking the wheels is one thing... did they HAVE to crunch the fuckin pinch rails???

[Tone Loc]

We need to bring back corporal punishment for these types of offenses....

[thumper]

what is that thing the car is sitting on? some kind of crate?

[dark0821]

Takes wheels but leaves the brembo brakes?

ok...

[oldsnail]

There aren't much FWD 5 x 120 cars these can fit on..

maybe ACURA TL (S).... but i think TLX went back to 114.3

probably just trying to sell it to other CTR owners

[thumper]

There aren't much FWD 5 x 120 cars these can fit on..

maybe ACURA TL (S).... but i think TLX went back to 114.3

probably just trying to sell it to other CTR owners

they will fit my mom's mdx... but the offset is not ideal.

i wonder if the brembos will fit... hm.

[OriginalJC]

These should fit on most BMWs

[oldsnail]

they will fit my mom's mdx... but the offset is not ideal.

i wonder if the brembos will fit... hm.

MDX rims DO NOT fit CTR. i have an MDX and they do not clear the BREMBOS

i never tried the otherway around, but the MDX is much heavier, and these rims are really easy to bend

[OriginalJC]

What have you CTR owners done for paint protection?
Ceramic?

Any shop recommendations?

[VR6GTI]

What have you CTR owners done for paint protection?
Ceramic?

Any shop recommendations?

Ceramic, Autowerkes Exclusive (http://www.autowerkesexclusive.com)

[oldsnail]

I have 3m PPF - full front clip.. i did it in victoria... the shop i went to usually does high end vehicles.. they said the CTR was harder than any 911 they had done

[OriginalJC]

I have 3m PPF - full front clip.. i did it in victoria... the shop i do it at usually does high end vehicles.. they said the CTR was harder than any 911 they had done

Any discoloring? How long have you had it on?

[oldsnail]

Any discoloring? How long have you had it on?

It looks just as new.. a year.. saved me a few rock chips from highway drives for sure

[tegra7]

Lloyd mats now makes oem style floor-mats for integras. Optional "ITR" logo is available!

https://www.lloydmatsstore.com/carpet-car-floor-mats

Just placed my order for 4 mats( front + rear) and a trunk mat. The 2 fronts and the trunk mat will have the ITR logo on them.

[VR6GTI]

Post pics when you get them :)
I could be wrong but you can still buy OEM ITR mats just not checkered. Nothing in the rear though

[TouringTeg]

Do you have a pic of the logo?

[tegra7]

Heres a pic from their website.

8.5"X 2" in size
http://i63.tinypic.com/2q1t28k.jpg

I definitely will! I know that black OEM mats are still available but asking prices are just ridiculous($500+USD) for a pair... Unfortunately lloyd's doesn't offer the checkered print, So I ordered mine in black velour carpet. I've seen their product first hand at SEMA last year and was quite impressed with the quality.

Link to their instagram page.
https://www.instagram.com/lloydmats/?hl=en

[TouringTeg]

Logo looks really good. I run the euro mats daily and have new in the package 4pc 2001 mats. The euro mats are already showing wear at the drivers heal.

Euro mats

https://i.imgur.com/NBIyNW8.jpg

https://i.imgur.com/Ru2GjQN.jpg

[tegra7]

How much were the 01 mats?

[Akord]

The lloyds mat quality is so so, I ordered a set for my CTR based on some pics and reviews, I found some small quality issues after receiving my set. But having said that I’ll prob still order a trunk mat for the ITR lol

[VR6GTI]

Group buy? :)

[TouringTeg]

How much were the 01 mats?

I got them from jasonturbo when he sold his 01 ITR and had some spare parts. I think I paid around $550 CAD for them in 2016. I think they were around $600 to $650 CAD at the time. Getting them new is not super easy. My local dealer said they were NLA. Yet some dealers on ebay have the 2001 brand new.

Just an FYI 97-00 mats are checkered and are discontinued. I actually had a pair of gently used front checkered mats and sold them when I bought the car. They ended up in a PY in New York and that car sold on BAT. I should have kept them.

I know the Lloyds mats are popular with Porsche owners. I am curious if their durability is better than the euro R mats.

[oldsnail]

I got them from jasonturbo when he sold his 01 ITR and had some spare parts. I think I paid around $550 CAD for them in 2016. I think they were around $600 to $650 CAD at the time. Getting them new is not super easy. My local dealer said they were NLA. Yet some dealers on ebay have the 2001 brand new.

Just an FYI 97-00 mats are checkered and are discontinued. I actually had a pair of gently used front checkered mats and sold them when I bought the car. They ended up in a PY in New York and that car sold on BAT. I should have kept them.

I know the Lloyds mats are popular with Porsche owners. I am curious if their durability is better than the euro R mats.

How do you keep track of your old MATS? i do not even know where any of my previous owned vehicles are right now.

[TouringTeg]

Mostly a coincidence but the ITR world is small. The location of the BAT seller was the same as where I shipped the checkered mats to just a few week prior. I also recognized the wear pattern.

I just spoke to Campus Acura Victoria parts as I ordered a new ebrake button this morning. The chrome on mine is chipped and you can replace the button only.

They can still get the 2001 OEM mats for $570 CAD plus tax. For kicks I asked about getting new carpet. It was $920 CAD but is NLA.

[Akord]

If you guys want to order the lloyds mat, make an account on autoanything.com, if I remember correctly, they give 20% off the 1st order, and you can customize lloyds mats on the site (that's where I got a CTR set from)

[VR6GTI]

I couldn't figure out why no one posted any pictures of their car on this forum anymore then i realized that everyone posted them on instagram now :pokerface:

[TouringTeg]

So much effort to upload to imgur then save the link into memo, then copy the link the add the (img) at the end of the link haha

No camping at the abandoned campground pls

https://i.imgur.com/HFPBID0.jpg
https://i.imgur.com/NhdI3gV.jpg

[OEMSiR]

i have euro mats, they are not bad

[yoursyumiko]

What's everyone's thought on this one?
https://vancouver.craigslist.ca/van/ctd/d/2001-honda-integra-type-220ps/6713294157.html

[tofu1413]

Blue on blue looks pretty cool on DC5 R... blue recaros woot!


but..... DC2R master race. :megusta:

[SituAsian]

Finally..

Picked this bad boy up. Brand new, 2017, got a slight discount off MSRP too :D

[tofu1413]

1818 like a boss :fuckyea:

[oldsnail]

Wow, you got a NEW 2017 ? make sure to check HONDA RECALLS. there was one for that model year

[SituAsian]

Yeah, a sales manager was going to keep the car for himself and it was in the showroom for a year, he decided to let it go and I was the lucky customer :D

I'll check for that recall too, thanks.

[daval]

Group buy? :)

I am in.

[VR6GTI]

Whose placing the order? :)

[OriginalJC]

Put on my winter wheels & tires today

https://www.civicx.com/attachments/akctr-6-of-13-jpg.119070/
https://www.civicx.com/attachments/akctr-3-of-13-jpg.119068/
https://www.civicx.com/attachments/akctr-11-of-13-jpg.119074/

[oldsnail]

Put on my winter wheels & tires today


Nice, mind sharing your setup? brand of rims/ size of rims / size of tires/ spacers?
nice H caps

[OriginalJC]

Nice, mind sharing your setup? brand of rims/ size of rims / size of tires/ spacers?
nice H caps

The wheels are:
Enkei Ammodo
https://www.1010tires.com/Wheels/Enkei/Ammodo
18" x 8", Offset: 32
No spacers (the offset is pretty aggressive, and you can see they are near flush)
I bought the rims off craigslist for a whopping $200 for all 4. Fixed all the curbing damage, primed and painted them gold. I'm super happy with the result.
The center caps are from eBay, paid I think around $15. Painted them at the same time as the wheels. They do not fit these wheels, at all. And are being held in place right now with clear silicone... we will see how long that holds :-P

Tires:
Toyo Celsius
235/45/18
https://www.1010tires.com/Tires/Toyo/Celsius/128980
Looks like 1010 jacked their price back up for this size to $250+.
For three days, they were $207-208... long enough for me to get the price match :-P

[OriginalJC]

https://www.civicx.com/attachments/akctr-10-of-13-jpg.119073/

I wish they made OEM mudflaps...

My biggest worry was clearing the Brembos, since no one seems to have tried these wheels on the CTR. And 1010 says they won't fit. But they do, and I'm quite surprised how good they look. Especially since I got them for cheaper than steelies.

[oldsnail]

I wish they made OEM mudflaps...

My biggest worry was clearing the Brembos, since no one seems to have tried these wheels on the CTR. And 1010 says they won't fit. But they do, and I'm quite surprised how good they look. Especially since I got them for cheaper than steelies.


There is a guy at 1010 tires that have an FK8 R.

2017-2018 Civic Type R, Rally Armor (http://www.rallyarmor.com/index.php/rally-mud-flaps-2017-2018-civic-type-c-60_280)

[OriginalJC]

There is a guy at 1010 tires that have an FK8 R.

2017-2018 Civic Type R, Rally Armor (http://www.rallyarmor.com/index.php/rally-mud-flaps-2017-2018-civic-type-c-60_280)

Personally don't like the look of those.
I've seen one person that took the normal civic mudguards and trimmed them down to fit his CTR. We can't even get the Sport hatchback mudguards here in Canada yet. I think those would require the least amount of trimming to fit.

[tegra7]

https://preview.ibb.co/fm7vAf/IMG-2765.jpg (https://ibb.co/hxHHO0)

https://preview.ibb.co/hX5FAf/IMG-2768.jpg (https://ibb.co/cGjmGL)

https://preview.ibb.co/cT4Wi0/IMG-2770.jpg (https://ibb.co/k3KLbL)

https://preview.ibb.co/kQwcO0/IMG-2778.jpg (https://ibb.co/nxWBi0)

[TouringTeg]

Those look great!

[TouringTeg]

Selling a few ITR parts. I bought these for my 01 ITR but decided to stick with my stock CDM ecu. Both work fine and I only used them for a day. An alternative to having CEL for evaporative system. Best for JDM or USDM car. Prices include shipping in Canada.

JDM 96 ITR ECU 37820-P73-003 (Plug and play for 97 98 99 ITR) $210 CAD shipped

Boomslang jumper harness OBD2B to OBD2A for 00 01 ITR and 99 00 Civic Si. $230 CAD shipped

Email: touringteg at hotmail dot com
Ig: touringteg

https://i.imgur.com/rrKSUQD.jpg
https://i.imgur.com/yYKsvWe.jpg
https://i.imgur.com/TzaqSvh.jpg
https://i.imgur.com/54RPhI8.jpg

[Tone Loc]

The wheels are:
Enkei Ammodo
https://www.1010tires.com/Wheels/Enkei/Ammodo
18" x 8", Offset: 32
No spacers (the offset is pretty aggressive, and you can see they are near flush)
I bought the rims off craigslist for a whopping $200 for all 4. Fixed all the curbing damage, primed and painted them gold. I'm super happy with the result.
The center caps are from eBay, paid I think around $15. Painted them at the same time as the wheels. They do not fit these wheels, at all. And are being held in place right now with clear silicone... we will see how long that holds :-P

Tires:
Toyo Celsius
235/45/18
https://www.1010tires.com/Tires/Toyo/Celsius/128980
Looks like 1010 jacked their price back up for this size to $250+.
For three days, they were $207-208... long enough for me to get the price match :-P

Are you lowered at all? Looking at getting a similar setup for my R. 18x8 Fast FC04 with 225/45 WS80's. If the wheel gap at my stock height looks like yours I will be extremely pleased!

[OriginalJC]

Are you lowered at all? Looking at getting a similar setup for my R. 18x8 Fast FC04 with 225/45 WS80's. If the wheel gap at my stock height looks like yours I will be extremely pleased!

Stock suspension. It does look like I've dropped it a little. Very happy with how much budget little buy turned out :-)

[oldsnail]

Are you lowered at all? Looking at getting a similar setup for my R. 18x8 Fast FC04 with 225/45 WS80's. If the wheel gap at my stock height looks like yours I will be extremely pleased!

SOme HONDA dealers carry FAST. i called one of them and it was 190 a wheel for 18"

[OEMSiR]

https://preview.ibb.co/fm7vAf/IMG-2765.jpg (https://ibb.co/hxHHO0)

https://preview.ibb.co/hX5FAf/IMG-2768.jpg (https://ibb.co/cGjmGL)

https://preview.ibb.co/cT4Wi0/IMG-2770.jpg (https://ibb.co/k3KLbL)

https://preview.ibb.co/kQwcO0/IMG-2778.jpg (https://ibb.co/nxWBi0)

custom?

[BIC_BAWS]

https://www.youtube.com/watch?v=8cvkPGiPrMQ


EK9 Type R !!! It's pretty high on my "want" list, probably right after the e46 m3.

[tegra7]

custom?

Yes. Ordered from here: https://www.lloydmatsstore.com/

[SumAznGuy]

https://www.facebook.com/OsakaClubRacer/photos/pcb.2796689327023119/2796688530356532/?type=3&theater

:fappery::fappery::fappery:

[TouringTeg]

^ the barrett jackson 97 Museum piece!

The ek9 CTR is for sale

[Naka San]

Where's the ad for the ek9 CTR?

[TouringTeg]

I dont think it is listed anywhere

[VR6GTI]

Question for CTR owners.
Anyone have extremely bad orange peel on their cars? My friend picked up a black one and its horrible the car almost looks flat on some angles its so bad, even the black wheels are really bad

[oldsnail]

Question for CTR owners.
Anyone have extremely bad orange peel on their cars? My friend picked up a black one and its horrible the car almost looks flat on some angles its so bad, even the black wheels are really bad

Oranage Peel?
My paint looks fine, the rubber seals on the windows look like they can be peeled off easily..

I have not cleaned MY OEM wheels ever. so i dont know how bad the wheels look when they are clean.

[Tone Loc]

No more worse than any other new sub-$40k car on the market. Personally, I consider the Type R to be "sub-$40k" because it is, at the end of the day, a Civic...

Both my 96 4Runner and 96 Integra GSR had better paint than my TSX or my R. A lot of that is because paints of today are cheaper and are kinder to the environment. Unfortunately this is how it is across the board. My neighbor's brand new S3 has a fair amount of orange peel as well.

EDIT: Put my winters on today. Very pleased with the result. Looks a lot better than the stock wheels IMO...

https://i.imgur.com/iqpsYSz.jpg

[OriginalJC]

https://www.autotrader.ca/a/Acura/Integra/St-Fr%C3%A9d%C3%A9ric/Quebec/5_39170409_/?loc=G0N1P0&gclid=EAIaIQobChMIiZeK3fmk3gIVDBitBh2xCAACEAEYASAD EgIH1_D_BwE
FeelsBadMan

It's hideous. Not sure if it's a real ITR, unless they did that sunroof aftermarket...

[oldsnail]

NICE FC04!

No more worse than any other new sub-$40k car on the market. Personally, I consider the Type R to be "sub-$40k" because it is, at the end of the day, a Civic...

Both my 96 4Runner and 96 Integra GSR had better paint than my TSX or my R. A lot of that is because paints of today are cheaper and are kinder to the environment. Unfortunately this is how it is across the board. My neighbor's brand new S3 has a fair amount of orange peel as well.

EDIT: Put my winters on today. Very pleased with the result. Looks a lot better than the stock wheels IMO...

[tegra7]

https://www.autotrader.ca/a/Acura/Integra/St-Fr%C3%A9d%C3%A9ric/Quebec/5_39170409_/?loc=G0N1P0&gclid=EAIaIQobChMIiZeK3fmk3gIVDBitBh2xCAACEAEYASAD EgIH1_D_BwE
FeelsBadMan

It's hideous. Not sure if it's a real ITR, unless they did that sunroof aftermarket...

Its been up for sale for at least 2 years. Could have been worth saving if it wasn't for the aftermarket sunroof.

[!Aznboi128]

NICE FC04!
Must say FC04 is beautiful, I have a set for my Cx-3 lol

[JDMACCORD]

Where's the ad for the ek9 CTR?

https://vancouver.craigslist.ca/bnc/cto/d/1999-civic-ek9-spoon-type/6734085549.html

There you go !

[tofu1413]

spoon banner... and a few odd and end spoon parts = spoon car... :facepalm:

[E-40six]

It doesn't even have the SW388's to justify the price

[prudz]

^ That is exactly what Tofu and I were just discussing lol. Nice car, good mods but I wouldn't call it Spoon without those wheels among other traditional Spoon mods.

[teggy604]

It doesn't even have the SW388's to justify the price

Even with spoon wheels, its still a very small market. JDM ITRs were not selling over $10K, so don't think the EK9 would be any better.

[tofu1413]

I'd pay 10k for that Ek..... :lawl:

[tegra7]

I think the asking price is quite reasonable for having a fully built motor. Stock ek9's with an oil burning motor go for what 10k landed?

[twitchyzero]

which b-series that's been trashed on doesn't burn oil?
still has wheel well rust...10k sounds about right...12k max

[JDMACCORD]

it’s gonna be hard to put together a authentic Ctr and all the labour and parts it has on there for 15 k nowadays. I think it’s a really fun daily and good value to your investment and the nostalgia everyone gets seeing a minty Ctr daily chugging along on the streets and not tucked away.

[Iron Chef]

That ctr looked a little smokey on decel in the roads untraveled vid. I wouldn’t call the motor built. It’s basically a stock Itr motor.

[R1CED`]

RHD for daily :heckno:

lol when labour costs are factored into the resale

got fooled by the Rota's haha

[VR6GTI]

Does the tach work yet?

[white rocket]

Nice EK9 but that Spoon horn button looks fake to me. The ring is incorrect and the face looks too flat. Throwing ITR B18C bottom end parts in a B16B does not make it a "built" motor, especially since it smoked pretty bad in the video. If anything it takes away from the originality of the EK9 motor itself. Even considering a car to be a "Spoon" car without having the staple SW388 wheels is a bit cheese bag, especially since reps are sitting in their place. With that said, a $10K price would seem more reasonable and could be a good starting point for either a track car or a full-out resto.

<-----not knocking it, just observing.

[Naka San]

Nice EK9 but that Spoon horn button looks fake to me. The ring is incorrect and the face looks too flat. Throwing ITR B18C bottom end parts in a B16B does not make it a "built" motor, especially since it smoked pretty bad in the video. If anything it takes away from the originality of the EK9 motor itself. Even considering a car to be a "Spoon" car without having the staple SW388 wheels is a bit cheese bag, especially since reps are sitting in their place. With that said, a $10K price would seem more reasonable and could be a good starting point for either a track car or a full-out resto.

<-----not knocking it, just observing.

Spoon wing looks fake too. I bet you probably those mirrors are fake as well.

Nothing is genuine spoon on this thing.

On another note, If anyone buy this EK9 and want 'REAL' spoon parts I have a brand new Spoon Carbon Hood, Mirror and Wing sitting at home. lol

[R1CED`]

is the K-series best 4 banger ever made? not only relevant after 17 years but still beating the competition

https://www.youtube.com/watch?v=BtkGMUY-4hs

[tofu1413]

Spoon wing looks fake too. I bet you probably those mirrors are fake as well.

Nothing is genuine spoon on this thing.

On another note, If anyone buy this EK9 and want 'REAL' spoon parts I have a brand new Spoon Carbon Hood, Mirror and Wing sitting at home. lol



well if the guy is willing to sell it to me for 10k........... i think i'd PM you right away :awwyeah::lawl:

do you have a cluster for teh spoons too ? :troll:


I do want to build something like....... this:

https://www.youtube.com/watch?v=EoW4ud32MyI

[FAWKER]

Anyone know off hand if the Integra Type R side mirrors are the same as the regular one? I need a drivers side one. Color doesn't matter as the car will be painted soon. I saw these on CL but have seen mirrors from a non type r go for $30

https://vancouver.craigslist.ca/van/pts/d/integra-type-side-mirrors/6732907288.html

[tofu1413]

same mirrors as standard integra.

[tegra7]

Just make sure they're lhd mirrors, as the rhd mirror lenses are angled differently.

[TouringTeg]

Does anyone have a P73-C03 CDM ITR ecu for sale?
This ecu is for 98 99 CDM only. USDM A03 is different.

Asking for an ITR friend in Quebec who's car is missing the original ecu.

[twitchyzero]

never gonna see the track

https://www.youtube.com/watch?v=GdyQUuBljng

[TouringTeg]

The Rywire ITR is a great marketing tool and experiment. Pretty awesome even if it never sees a track.

Been doing maintenance for next season.

Oil and filter change
Stock wheels back on
Diagnose door panel rattle
Rear OE rotors, rear OEM brake pads
Replace ebrake button (pita)
Finally solve CEL P1457 evap after 5 months. Replacement P73-C04 ecu acquired from a friend and immobilizer bypass chip installed.
(discontinued and only 400 00 01 CDM ITR sold)

Wheels are refinished and new A center caps installed.

https://i.imgur.com/8yyfDJa.jpg
https://i.imgur.com/ozqYrCd.jpg
https://i.imgur.com/8VhyYsx.jpg
https://i.imgur.com/1dDyZvN.jpg

[PLUJ]

Looks great! Who did you get to refinish your wheels? and how's the colour match to your car?

[VR6GTI]

Looking great
Judging by the center cap match I’d say probably pretty good

[TouringTeg]

I had Panther do them a few years ago.
They did a good job matching the oem wheel color.

A friend has new OEM ITR wheels he purchased recently and they look nearly identical.

[twitchyzero]

hope that ECU didn't cost you an arm and a leg
probably no more advanced than a floppy drive :lawl:

that Rywire build reminds me of phat_R's copy...anyone know if he still has it?

[tegra7]

hope that ECU didn't cost you an arm and a leg
probably no more advanced than a floppy drive :lawl:

that Rywire build reminds me of phat_R's copy...anyone know if he still has it?

The Py with the jdm front and j’s racing kit?

[OriginalJC]

Put on two coats of cquartz ceramic yesterday
https://www.civicx.com/attachments/akctr-2-of-5-jpg.121928/

Also did a carbon wrap on my spoiler
https://www.civicx.com/attachments/akctr-1-of-5-jpg.121929/

[TouringTeg]

Did the ceramic yourself? How long did it take out of curiosity

Twitchyzero: My old ITR friend who has a PY locally since 04 sold me his spare for what he paid for it years ago: $120 I am happy with that! It was the trips to two shops for evap diagnosis (smoke test, test solenoids for continuity etc) jdm ecu, jumper harness, bypass chip done in California that was expensive lol

If I had to do again and I would just get Hondata

[VR6GTI]

Ceramic coating takes like 20 mins to apply its the prep in getting the car to a swirl free finish that takes the time

[OriginalJC]

Did the ceramic yourself? How long did it take out of curiosity

Twitchyzero: My old ITR friend who has a PY locally since 04 sold me his spare for what he paid for it years ago: $120 I am happy with that! It was the trips to two shops for evap diagnosis (smoke test, test solenoids for continuity etc) jdm ecu, jumper harness, bypass chip done in California that was expensive lol

If I had to do again and I would just get Hondata


What VR6 said is accurate, the prep took a long time. Full clean, clay bar, further decontamination, then ceramic. The first coat took the longest as I let each panel sit 2.5 min to bond before wiping down. Second coat I let it sit about a minute. It turned out well, there is a insane glossy shine. Letting it cure 48 hours.

[R1CED`]

why're there so many white tabs on the roof behind the shark fin on the CTR from factory?

is it for aero?

[Bender Unit]

why're there so many white tabs on the roof behind the shark fin on the CTR from factory?

is it for aero?

Vortex Generator

[godskrilla]

Best fk8 color

[white rocket]

that Rywire build reminds me of phat_R's copy...anyone know if he still has it?

Yup, he's still got it! I hope he doesn't mind the picture re-share. More track miles than road miles and has owned it since new. Doing ITR ownership right :thumbsup:

http://i.imgur.com/Hes0dcU.jpg (https://imgur.com/Hes0dcU)

[TouringTeg]

98 R 187 kms on Bat

https://bringatrailer.com/listing/1998-acura-integra-type-r-7/

[VR6GTI]

i never really keep track of who wins the bidding on the bringatrailer ads however i do notice silversurfer007 bids on them all and asks a billion questions.

[TouringTeg]

I am suprised this car is at about 29k CAD with 5% bat fee already. A lot of people saw the 97 ITR sell at barrett jackson for $68,500 USD and see dollar signs.

It is fun owning a car that is rising in value but at the same time it makes you think twice about adding miles. These cars are meant to be driven.

Pretty crazy the seller said he destroyed 4 of them at the track and threw out the interiors for a cage.

[twitchyzero]

video too short BibleThump

https://www.youtube.com/watch?v=qXmIZM7BlXk

[daval]

Thats dope. Mark also has a white E36 M3 with ccw and basic stuff as well.

I will go watch it now.

[oldsnail]

I am suprised this car is at about 29k CAD with 5% bat fee already. A lot of people saw the 97 ITR sell at barrett jackson for $68,500 USD and see dollar signs.

It is fun owning a car that is rising in value but at the same time it makes you think twice about adding miles. These cars are meant to be driven.

Pretty crazy the seller said he destroyed 4 of them at the track and threw out the interiors for a cage.

ITR is a good investment.. i thought MR2's would hold value as well, obviously not as good as ITR

[twitchyzero]

crazy how only rx-7/S2000/ITR are the only once-attainable (in the teens) enthusiasts cars to have appreciate dramatically in value

boxster, E36/E46/E85/E86 M, mazdaspeed miata, none of which seems to have people throwing money mindlessly at them

[BIC_BAWS]

boxster, E36/E46/E85/E86 M, mazdaspeed miata, none of which seems to have people throwing money mindlessly at them


A E46 M3 ZCP in Interlagos Blue with the SMG was sold for 50K USD last month. Crazy stuff.

[tofu1413]

E46 market is healthy for now.

MS miata are still 10k!

[oldsnail]

E46 market is healthy for now.

MS miata are still 10k!

mazdaspeed protege can also be attained very cheap

[TouringTeg]

Mazdaspeed Miata is such a capable car. There is one with a few Racing Beat upgrades that competes very well at my local autox.

[teggy604]

crazy how only rx-7/S2000/ITR are the only once-attainable (in the teens) enthusiasts cars to have appreciate dramatically in value

boxster, E36/E46/E85/E86 M, mazdaspeed miata, none of which seems to have people throwing money mindlessly at them


Few reason is because they are still being made, expensive to maintain, no racing pedigree and not limited production.

[R1CED`]

Mazdaspeeds are pretty limited, fairly reliable, and out of production

no pedigree means cheap power to be had

[tofu1413]

https://vancouver.craigslist.ca/van/cto/d/1997-acura-integra-type/6746110452.html


$25k car... 97' spec with 01 bumpers and lighting.... yet runs replica recaro seats.... :facepalm:

[freelunch]

Salvage title too

https://vancouver.craigslist.ca/van/cto/d/1997-acura-integra-type/6746110452.html


$25k car... 97' spec with 01 bumpers and lighting.... yet runs replica recaro seats.... :facepalm:

[thumper]

they didn't even bother to try and color match the radiator support... that looks like frost white not championship white to me?

[TouringTeg]

Damn listing gone already

What was the mileage

[thumper]

Damn listing gone already

What was the mileage

i think it said 42xxx in the ad?

[twitchyzero]

title: salvage
no test pilots! lmao

it looked pretty neglected

did that 97 k-swap with LED taillights end up selling? anyone know how much?

[VR6GTI]

It looked beat to shit. Must have meant 7k not 27k


The 97 LED k swapped sold to someone local after the US deal fell through. Not sure how much. I’m guessing 20-25k

[tofu1413]

salvage title with a "rebuilt" motor as well.

had a chrome valve cover... borderline cringe spec.

[tegra7]

Who’s car is this?!?
https://bringatrailer.com/listing/2001-acura-integra-type-r-20/?utm_source=transactionalemail&utm_medium=email&utm_campaign=bat_model_notification

[tofu1413]

this was the one that was for sale for $28k a few months back.


Long story short, the current guy bought it and gave evo garage a blank cheque to fix it back to spec.

(it had B16a cams in it at one point....... :lawl: )

[twitchyzero]

for an east coast car, that's pretty minty

[Iron Chef]

Mileage discrepancy, jdm B18c swap and internal tranny work. It was beat at some point in its life

[VR6GTI]

Hopefully the new buyer got a good deal and didn’t pay the asking price and then have to deal with all that shit

[oldsnail]

this was the one that was for sale for $28k a few months back.


Long story short, the current guy bought it and gave evo garage a blank cheque to fix it back to spec.

(it had B16a cams in it at one point....... :lawl: )

I have heard of thie b16 ITR before.. in victoria.. i think he is amuroray's friend

[tegra7]

Did anyone else end up ordering mats from lloyd mats?

[VR6GTI]

Nope
Would only be interested in the rear mat

[TouringTeg]

Nope. I should pony up for another set of oem 2001 mats.

If I had a 97-00 the Lloyds are a solid option.

[tofu1413]

I have heard of thie b16 ITR before.. in victoria.. i think he is amuroray's friend

yeah i heard about the B16 car before too.


This one has the B18 block... but some troll took the ITR cams and put in B16 ones :awwyeah:

[oldsnail]

yeah i heard about the B16 car before too.


This one has the B18 block... but some troll took the ITR cams and put in B16 ones :awwyeah:

He said he owned a 97 model with b16 cams ( bought it unknowingly) . .seems like it was a popular downgrade.

[twitchyzero]

that quebec one posted in good buys thread few weeks back with the nasty alteeza and sunroof is this one?

https://jalopnik.com/how-the-acura-integra-type-r-makes-modern-sport-compact-1795295614

his is a very real Integra Type R from Canada, folks. It’s number 50 out of only 197 built. As for the sunroof, Craig, the owner, bought the car second-hand from his local Acura dealer when he was 18. Imagine owning a car like this when you’re that age. Like all immature teenagers at the wheel of a Honda Type R, he did a few stupid things with it. He also crashed it. Thankfully, he was OK

But the car was beaten up pretty badly and needed an entirely new roof. The problem was that the only roofs that were readily available at the time were from an Integra GS-R, which all came with a sunroof. Craig could have waited for a real Type R roof section, or one from an Integra GS, but that would have taken weeks or even months.

He was 18. The kid wanted his car back, fast, so he could get back to racing the other kids with it. Plus, he figured a sunroof would be a cool creature comfort on his Type R. I mean why not, right? So he went with it.

He admits regretting his decision ever since and has plans to delete the glass.

[TouringTeg]

I must have missed the sunroof car being posted? Easy to spot since it is pretty rare someone would add a sunroof.

[OriginalJC]

that quebec one posted in good buys thread few weeks back with the nasty alteeza and sunroof is this one?

https://jalopnik.com/how-the-acura-integra-type-r-makes-modern-sport-compact-1795295614

You mean this one?
https://www.autotrader.ca/a/Acura/Integra/St-Fr%C3%A9d%C3%A9ric/Quebec/5_39170409_/?loc=G0N1P0&gclid=EAIaIQobChMIiZeK3fmk3gIVDBitBh2xCAACEAEYASAD EgIH1_D_BwE

[TouringTeg]

^ Still not sure that is a real Type R. Looks like a leather wrapped arm rest.

[tofu1413]

just need the DC2 in the Vin to confirm if real type R.

[thumper]

https://i.kinja-img.com/gawker-media/image/upload/s--8h9oZXbD--/c_scale,f_auto,fl_progressive,q_80,w_1600/cf8fo3ws0pcg6xam91tc.jpg

nice. tach deep in redline with a CEL on the side

[Hakkaboy]

just need the DC2 in the Vin to confirm if real type R.

FYI GSR's also have DC2 in the VIN

[R1CED`]

so many sunroof 'type R's' in QC :lawl:



nice. tach deep in redline with a CEL on the side

probably just catless

[teggy604]

FYI GSR's also have DC2 in the VIN


DC231 is type R
I believe GSR is DC234

[prudz]

https://i.kinja-img.com/gawker-media/image/upload/s--8h9oZXbD--/c_scale,f_auto,fl_progressive,q_80,w_1600/cf8fo3ws0pcg6xam91tc.jpg

nice. tach deep in redline with a CEL on the side

You can program Hondata ECU's to use the check engine light as a shift light FYI

[jasonturbo]

Hai gais

[white rocket]

Hai gais

Sooooooooooo........wouja buy?

[jasonturbo]

this was the one that was for sale for $28k a few months back.


Long story short, the current guy bought it and gave evo garage a blank cheque to fix it back to spec.

(it had B16a cams in it at one point....... :lawl: )

I believe the current owner is into it for >36k, he bought to flip, fools math.

[VR6GTI]

Never a good idea with a different motor. I’d be surprised if it hits 20k on BAT

[twitchyzero]

last update we had, JT was riding an aero carbon bike SeemsGood

[tegra7]

Never a good idea with a different motor. I’d be surprised if it hits 20k on BAT

Didn’t hit reserve. Highest bid was 18k

[JDMACCORD]

https://vancouver.craigslist.ca/van/cto/d/2001-acura-integra-type/6753117960.html

It’s for sale local now

[VR6GTI]

well i guess you can ask whatever you want but will people pay it lol

[twitchyzero]

20k cad probably fair for an 01 with baggage?

[TouringTeg]

Auction ended just under $25k CAD with bat fee Seems like a fair price.

[twitchyzero]

BaT is for Americans though

locals probably undercut by a few thousands

[VR6GTI]

Ya I was thinking low 20’s

[JDMACCORD]

Really Minty though shows well
too bad jdm motor and missing driver side fender vin

[jasonturbo]

That 01 from BaT took a couple weeks to sell locally back in June when the seller was asking 28K, that was peak ITR hype, it's now winter, and the seller has spent thousands on taxes and maintenance.

The current owner is going to take a bath on it, no way that car sells for >30.

[teggy604]

That 01 from BaT took a couple weeks to sell locally back in June when the seller was asking 28K, that was peak ITR hype, it's now winter, and the seller has spent thousands on taxes and maintenance.

The current owner is going to take a bath on it, no way that car sells for >30.

Ya. Owner probably going to store till next summer and try again. Although I find US market there is more demand where as Canadian market not so much.

[tegra7]

Belongs to an rs member from the island.
https://vancouver.craigslist.ca/van/cto/d/2001-acura-integra-type/6755302894.html

[Tone Loc]

Belongs to an rs member from the island.
https://vancouver.craigslist.ca/van/cto/d/2001-acura-integra-type/6755302894.html

That "difference in panel gap between the driver and passenger side where the sides of the rear bumper line up to the rear quarters" though...

[twitchyzero]

they're all like that, the rear bumper gap sucks on the ITR

there's a resto thread on honda-tech IIRC and he did an admirable job saving her, i personally wouldn't pay more than 10k for a rebuilt 200k+ highly modified though

[Original BB1]

Belongs to an rs member from the island.
https://vancouver.craigslist.ca/van/cto/d/2001-acura-integra-type/6755302894.html

Hey guys.

Yup that's my car for sale. If there's any questions, or thoughts on pricing adjustment, I honestly would appreciate that sorta input. I want it to be a fair asking price, because I know it's not a pristine example of the R. It's a mechanically sound ITR for around $11k usd that you can use as a track toy or weekend warrior and not feel guilty about it.

Owned the car since 2011, but it's time to move on now that I have different priorities in life.

Additional photos if interested are on my instagram: @kevin_lawrenuk

Thanks!

[white rocket]

^^Really nice car as a track warrior since it's already a rebuilt and has high mileage yet has a rebuilt motor to ensure reliability. Nice little aero mods and those CE28's are nice too. GLWS :thumbsup:

[TouringTeg]

Good luck Kevin. I think you are pretty close to market value.

01-1220 132kms for sale in Montreal.. $45k CAD

https://www.ebay.ca/itm/Acura-Integra-Type-R/153231073046?hash=item23ad489f16:g:SQcAAOSwo2xb0Jv 8

[tegra7]

I’m more impressed with his method of storage rather than the condition of the car.

[tegra7]

Not type r related but holy crap!
https://bringatrailer.com/listing/1991-honda-prelude-7/

[white rocket]

^^^Off to the Real Time Collection Hall

I’m more impressed with his method of storage rather than the condition of the car.

Sounds like they found it in there all bolted up like a barn find.

[tegra7]

Hey DC2 friends. Are 94-97 front mud flaps the same as 98-2001?

[OEMSiR]

Hey DC2 friends. Are 94-97 front mud flaps the same as 98-2001?

iv seen jdm mud flaps for sale on ebay, they were listed as 94-2001..
im sure they all the same unless the seller made a mistake? not sure

https://www.ebay.com/itm/JDM-Acura-Integra-2-Door-DC2-Mud-Flaps-Splash-Mud-Guards-1994-2001-5348/273596237944?hash=item3fb39b4878:g:Iv8AAOSwfMlcCB6 a#viTabs_0

[Iron Chef]

Fronts are same , rears are different

[Naka San]

Fronts are same , rears are different

Does anyone here know if 94 Acura Integra interior is the same as 98-01 ITR?

ex. Headliner and also interior panels

Thanks

[Iron Chef]

Headliner same
Rear 1/4 trim panels different
Carpets different
Rear seat bottoms different

98+ added some bracing under the rear seat which changed the contour of the floor around the rear seat

[westopher]

Good luck Kevin. I think you are pretty close to market value.

01-1220 132kms for sale in Montreal.. $45k CAD

https://www.ebay.ca/itm/Acura-Integra-Type-R/153231073046?hash=item23ad489f16:g:SQcAAOSwo2xb0Jv 8
The car was taken out for a ride once every summer for a couple of hours.Take note of attached pictures - the car has one scratch.

The car is now in the Montreal area. It took me 3 years of hard work to try to convince the owner to sell it to me.

Only 82,000 milles or 132,000KM (canadian car).
Was the car being driven @ 3000km/h on those trips?:lawl:

[TouringTeg]

Story is strange. I actually spoke to the seller and he sold a 99 earlier in the year and had a bunch of other cars. Flipper for sure.

Clean one just hit BaT:
https://bringatrailer.com/listing/2000-acura-integra-type-r-20/

[tegra7]

Underneath is quite rusty.

[Naka San]

Headliner same
Rear 1/4 trim panels different
Carpets different
Rear seat bottoms different

98+ added some bracing under the rear seat which changed the contour of the floor around the rear seat

I assume the rear 1/4 trim panels are the same panels you're talking about in the picture below?

https://jdmohiodirect.com/image/cache/data/DC2/0134-JDM-DC2-Integra-Type-R-Interior-Rear-Panel-Set-700x700.jpg

[tofu1413]

http://i298.photobucket.com/albums/mm245/s2000_T/DSC01111.jpg


never seemed to notice difference between 96 and 98+ cars for the seat bottom

[underscore]

Story is strange. I actually spoke to the seller and he sold a 99 earlier in the year and had a bunch of other cars. Flipper for sure.

It annoys me a bit when a car that was clearly very treasured by someone ends up in the hands of a flipper. They always seem to end up just being passed around endlessly and never actually enjoyed by anyone.

[TouringTeg]

Whether it is a Hatchimal, Monopoly for Millenials or PS4 with Spiderman flippers will get in the way of the end user to make a buck.

[westopher]

It annoys me a bit when a car that was clearly very treasured by someone ends up in the hands of a flipper. They always seem to end up just being passed around endlessly and never actually enjoyed by anyone.
UGHHHHHHHHHHHHHHHHHHHHH
I couldn't agree more. Peoples greed just makes sure no one has fun.

[underscore]

They're part of why the asking price for my car is so high. I know it will have to come down to sell, but a flipper will just see the price and scroll past while an enthusiast who actually wants it is more likely to reach out and see if the price can come down (it can, quite a bit actually). Maybe my thought process is way off and that's a stupid way to do things but it's not the end of the world if it doesn't sell.

[westopher]

Personally, I'd price it lower, exactly what I'd want to get and then pick my buyer. Same mindset, different path though.

[twitchyzero]

no i actually hope more flippers grab the ITR, fix them up, and lose thousands and thousands like that loser on BaT stuck with the Quebec CDM 01 few pages back thinking the market is only made of Barrett Jackson high rollers

[twitchyzero]

biggest acura fanboy?

https://www.youtube.com/watch?v=PqA4YTCaifg

someone sell me a mint legend coupe please

[AzNightmare]

How do people enjoy cars if they are treated like collectors to begin with. No one wants to "molest" it cause the resale value will plummet.

Different thought process for me, but I would do what I would do with my cars, and resale comes secondary, not a big deal if I can't get optimal value back.

Can't save my girl for the next guy, you know?....

[tofu1413]

https://static1.squarespace.com/static/571578f0b09f95a12b4248ad/t/57c713acf7e0abc90ae2d8fd/1472664495415/?format=1000w


those Legend coupes are classy AF... and offered with a 6MT too!

the interior on both coupe and sedan are quite nice.

[TouringTeg]

How do people enjoy cars if they are treated like collectors to begin with. No one wants to "molest" it cause the resale value will plummet.

Different thought process for me, but I would do what I would do with my cars, and resale comes secondary, not a big deal if I can't get optimal value back.

Can't save my girl for the next guy, you know?....

It is kind of a balance. I modified my car a little but can easily go back to stock. I bought my car cheap enough I will still track it as intended.

With my 993 C4S I started to worry about other drivers too much. Plus it was not a good for track which I wanted to do again.

As cars get older people usually do reversible mods and focus on preserving and maintaining them. Also stock piling OEM parts before they are discontinued.

[twitchyzero]

doubt most R specific parts are going to stop functioning
the rest, well it's an Integra, parts are cheap and/or interchangable with a Civic

[68style]

It’s not so much functioning as wear and tear... every older or rare car owner that cares stockpiles parts... I’ve got 2 sets of OEM Toyota floor mats for my MR2 Turbo before they were discontinued and all the TRD stuff... new mouldings or t-top weatherstrips... you don’t want used ones of those. That kind of thing.

[68style]

https://static1.squarespace.com/static/571578f0b09f95a12b4248ad/t/57c713acf7e0abc90ae2d8fd/1472664495415/?format=1000w


those Legend coupes are classy AF... and offered with a 6MT too!

the interior on both coupe and sedan are quite nice.

See how can you sit down in that and have a bad day? You’re stressed or tired or broke and your car might be super old, but you sit down in that atmosphere and everything is so simple and elegant and just works / feels right... gives your soul something to centre itself around.

[Iron Chef]

94-97 mounting tabs go into the body
98-01 mounting tabs go into the reinforcement plate
There in different locations

http://i298.photobucket.com/albums/mm245/s2000_T/DSC01111.jpg


never seemed to notice difference between 96 and 98+ cars for the seat bottom

[TouringTeg]

It makes me sad that Honda just discontinued 98 - 01 headlights. 94 - 97 headlights were discontinued long ago.

[underscore]

those Legend coupes are classy AF... and offered with a 6MT too!

the interior on both coupe and sedan are quite nice.

I had a 95 V6 (very briefly) and holy shit that was a nice car to drive. It had the air purification system (not just some stupid filter, an actual air purifier), memory seats, even a car phone! Everything was electric, everything worked, going down a FSR it was so smooth I accidentally pulled too far ahead and lost the Jeeps and truck that were following me because they couldn't match the pace over the bumps :pokerface:

It was purchased cheap for a bachelor party and was not treated gently, in the end we only managed to kill it by jumping it 25ft and the nose down landing set off the airbags so it wouldn't restart. It was still running until we shut it off though. That thing was tough as nails and I wouldn't hesitate to pick one up as a daily driver.

[Bender Unit]

It makes me sad that Honda just discontinued 98 - 01 headlights. 94 - 97 headlights were discontinued long ago.

Honda need to learn from Nisaan and open "Heritage Parts Program"

Nissan's Heritage Parts Program to Begin Producing R33 and R34 GT-R Parts Once Again - The Drive (http://www.thedrive.com/news/25295/nissans-heritage-parts-program-to-begin-producing-r33-and-r34-gt-r-parts-once-again)

[tofu1413]

I had a 95 V6 (very briefly) and holy shit that was a nice car to drive. It had the air purification system (not just some stupid filter, an actual air purifier), memory seats, even a car phone! Everything was electric, everything worked, going down a FSR it was so smooth I accidentally pulled too far ahead and lost the Jeeps and truck that were following me because they couldn't match the pace over the bumps :pokerface:

It was purchased cheap for a bachelor party and was not treated gently, in the end we only managed to kill it by jumping it 25ft and the nose down landing set off the airbags so it wouldn't restart. It was still running until we shut it off though. That thing was tough as nails and I wouldn't hesitate to pick one up as a daily driver.


fabulous looking machines. that long hood line and lean body lines is timeless. if in good shape, will be a great "beater". actually i'd be ashamed to call it a beater, will always say its my daily driver.

https://cdn.bringatrailer.com/wp-content/uploads/2017/11/5a022552b0de1_photo1-940x604.jpg

[OEMSiR]

30476

Since we talking about a legend...
What you guys think about this sick render? 🤔
what if this really appears next few years, RLX legend!

[tofu1413]

Acura needs to get back to basics, clean simple designs. All those mixed shapes and sharp edges are really throwing off the Honda fan boys. It’s like the car was designed by a committee that can’t decide, so they use a suggestion box and try to use all of them!

[!Aznboi128]

Honda/Acura will never make a 2 door Legend. Prob make another SUV and name it that more than anything.

[twitchyzero]

It’s not so much functioning as wear and tear... every older or rare car owner that cares stockpiles parts... I’ve got 2 sets of OEM Toyota floor mats for my MR2 Turbo before they were discontinued and all the TRD stuff... new mouldings or t-top weatherstrips... you don’t want used ones of those. That kind of thing.

all-weather mats for integra should be easy to come by, few pages back there's also carpets with very convincing OEM replacments

the recaro-made leather buckets i have have slight wear on the bolsters, nothing some simple dye and conditioning can't fix

the leather-wrapped momo is also 98% of its original condition 150k later

take good care (garaging it probably helps) or get professionals like upholestry service and you don't have to worry much about stockpiling costly Type-R/TRD/M etc specific parts...everything else you can find relatively easy...except for the radio! don't ever toss out a stock one even if you think it's a piece of shit from the 90s

[twitchyzero]

https://i0.wp.com/www.curbsideclassic.com/wp-content/uploads/2016/05/88-Legend-coupe-1.jpg

Curbside Classic: 1988 Acura Legend Coupe ? Precision Crafted Performance (http://www.curbsideclassic.com/curbside-classics-american/curbside-classic-1988-acura-legend-coupe-precision-crafted-performance/)

[kchan]

got hooked up by Tofu

thank you for the awesome deal :D

[oldsnail]

Nice RR!!!
if i knew i could of got deals on CTR's... i'll look for Tofu as well :(

[tofu1413]

enjoy your new ride Kalson.


coincidence that we got the CTR on trade for an M4!


Second one I've sold this year... more than happy to post here if any one is looking for a pre owned CTR :lawl:

[oldsnail]

enjoy your new ride Kalson.


coincidence that we got the CTR on trade for an M4!


Second one I've sold this year... more than happy to post here if any one is looking for a pre owned CTR :lawl:

i feel it is better to buy pre-owned.. given how many problems i had with my CTR

[twitchyzero]

what kinda problems? is your's 2017?

[oldsnail]

what kinda problems? is your's 2017?

yeh...

there was a recall on the solenoid that will cause the car to go into limp

plastic bits and pieces of the interior falling apart and rattling everywhere. I had the A-pillar replaced

failed blower fan

the infotainment system kept crashing and they updated it as per service bulletin

water kept going in tail lights

rear window weather strip keeps falling off..

for a new car. .it is just annoying .. this is just year 1.

[oldsnail]

on the forums, alot of people had problems with their transmission ... i havent experienced that..

alot of people had this problem with EP3/ DC5.. i still have my EP3, and never experienced this either in its lifetime. i owned it since 05... and it is an 02 model.

[twitchyzero]

my dc5 under warranty had the weird dash ticking when turning, fixed

mechanically sound since day 1 but the minor things adds up and there's sure better use of my time

honestly toyota and honda just aren't as bulletproof as the golden days..the only japanese-branded car i would still buy is probably specialized toyotas and mazdas like the 4runner or miata and maybe some newer subarus...i'm annoyed the newer toyotas have more or less sealed transmissions

and that's only dealing with mickey mouse na motors, force induction just adds another layer

[Swonz]

https://static1.squarespace.com/static/571578f0b09f95a12b4248ad/t/57c713acf7e0abc90ae2d8fd/1472664495415/?format=1000w


those Legend coupes are classy AF... and offered with a 6MT too!

the interior on both coupe and sedan are quite nice.

holy wow a 6 MT Honda from the golden era.

[twitchyzero]

you guys like 2g better?
they look unnecessarily long esp the coupe
https://vancouver.craigslist.org/rds/cto/d/91-acura-legend/6746495841.html

[oldsnail]

my dc5 under warranty had the weird dash ticking when turning, fixed

mechanically sound since day 1 but the minor things adds up and there's sure better use of my time

honestly toyota and honda just aren't as bulletproof as the golden days..the only japanese-branded car i would still buy is probably specialized toyotas and mazdas like the 4runner or miata and maybe some newer subarus...i'm annoyed the newer toyotas have more or less sealed transmissions

and that's only dealing with mickey mouse na motors, force induction just adds another layer

My Ep3 is a rock star.. all i have changed are wipers... tires... and regular maintenance... still original battery. have not found a reason to get rid of it yet

[cococly]

Any other FK8 have some mechanical clicking noise , along with wheel skipping/hopping while turning at very low speed?

It happened on my 2018 when it's cold outside.

[oldsnail]

Any other FK8 have some mechanical clicking noise , along with wheel skipping/hopping while turning at very low speed?

It happened on my 2018 when it's cold outside.

The LSD makes sound...

wheel hopping? are you on your stock 20"s with Continental SportContact 6?

[cococly]

The LSD makes sound...

wheel hopping? are you on your stock 20"s with Continental SportContact 6?

Yes, it's completely stock with the original rims and tires.

[oldsnail]

Yes, it's completely stock with the original rims and tires.

They are not 4 season tires. Probably hopping because you have no grip.

https://www.continentaltire.ca/car/tires/car/summer-plt/sportcontact-6

If you plan on driving all year, i recommend getting a set of winter/ 4 seasons . my winter set is much quieter and comforting compared to my stock

[cococly]

What is your winter tire setup?

[oldsnail]

What is your winter tire setup?

pictures are a few pages back.
i got my rims/ tires from 1010tires in richmond.

18" rims / tires.
it was about 1200
fast wheels and nexen winter tires

[SituAsian]

Any other FK8 have some mechanical clicking noise , along with wheel skipping/hopping while turning at very low speed?

It happened on my 2018 when it's cold outside.

Yeah, I have the same sounds coming from my FK8. Sounds like springs compressing/creaking at full left or right tilt.
I assumed it was the LSD or tires.

I also have a creaking sound while driving, only noticeable from the outside or with the window open when the noise can bounce off of something.
Not sure what that is.
Anyone have any ideas?

[oldsnail]

Yeah, I have the same sounds coming from my FK8. Sounds like springs compressing/creaking at full left or right tilt.
I assumed it was the LSD or tires.

I also have a creaking sound while driving, only noticeable from the outside or with the window open when the noise can bounce off of something.
Not sure what that is.
Anyone have any ideas?

Exterior screeching noise ? low speed only? does it come from near the wheel? if it is, it is probably pebbles of rock stuck in your Brake calipers.

[cococly]

Yeah, I have the same sounds coming from my FK8. Sounds like springs compressing/creaking at full left or right tilt.
I assumed it was the LSD or tires.

I also have a creaking sound while driving, only noticeable from the outside or with the window open when the noise can bounce off of something.
Not sure what that is.
Anyone have any ideas?

My steering wheel would shake a bit too when that happened.

When was your FK8 delivered?

I am thinking us FK8 owners shall drive to a Honda dealership at the same time and ask them for a through inspection of the LSD/transmission/suspension.

Plus, arriving in a group of FK8s with the same issue should get their attention.

[SituAsian]

My steering wheel would shake a bit too when that happened.

When was your FK8 delivered?

I am thinking us FK8 owners shall drive to a Honda dealership at the same time and ask them for a through inspection of the LSD/transmission/suspension.

Plus, arriving in a group of FK8s with the same issue should get their attention.

Mines R-01818. It was probably delivered to the dealership sometime in mid 2017.

I was thinking of going in to Honda just cause I'm still under warranty, but haven't found the time yet. Also wanting for them to check out my other creaking noise too.

I did think it could be something was stuck in between my rotor dust cover, but again, haven't had a chance to take the wheel off and look at it.

[oldsnail]

Mines R-01818. It was probably delivered to the dealership sometime in mid 2017.

I was thinking of going in to Honda just cause I'm still under warranty, but haven't found the time yet. Also wanting for them to check out my other creaking noise too.

I did think it could be something was stuck in between my rotor dust cover, but again, haven't had a chance to take the wheel off and look at it.

I had my FK8 since OCT 2017
It happens often. (brakes in pebble)
I avoid going on unpaved roads now.
i removed my brake calipers at least twice so far to remove pebbles.

I have taken my car in and they have taken care most of my concerns.

LSD making noise is NORMAL.
Brakes making noise is NORMAL. This is what you get with race brakes. (i changed mine to HAWK , so sequel)

Suspension noise - peek under your car and look at the roof of your suspension. If you have orange cubes.. it should have been removed from PDI.. remove it if it is there.

Summer tires - probably not the best idea to have them on right now. but they are SOOO loud to begin with just normal driving

https://www.civicx.com/attachments/b3157a77-8c6b-40e6-add9-4e634429d9b0-jpeg.96787/

[twitchyzero]

value is probably up a bit after all the recent nostalgic resurgence on the internet

https://www.youtube.com/watch?v=2TOAPqcBezc&

[TouringTeg]

Dc2 ITR parts

https://vancouver.craigslist.org/bnc/pts/d/burnaby-integra-type-parts/6784777569.html

[tofu1413]

https://vancouver.craigslist.org/bnc/cto/d/burnaby-2001-honda-accord-euro-cl1/6785681621.html


so pricey... but so pretty.

[320icar]

maybe i just dont get the appeal of that car. but for 15k it doesn't even come with the nice wheels.

edit: thought this was the good buys thread

[tofu1413]

its an R thread lol, I'd post this on the craigslist fails thread. (although the parts and paint work does add up to more than the guys asking price)

[tegra7]

Dc2 ITR parts

https://vancouver.craigslist.org/bnc/pts/d/burnaby-integra-type-parts/6784777569.html

Wheels are already sold☹️

[TouringTeg]

Wheels are already sold☹️

Those were a fair price with caps.

I am interested in a set of ok to good condition CW OEM 15" wheels of anyone has any. Not looking to spend $1200 for a beat up set.

[SumAznGuy]

Those were a fair price with caps.

I am interested in a set of ok to good condition CW OEM 15" wheels of anyone has any. Not looking to spend $1200 for a beat up set.

Really?

I had trouble selling mine for $400.
Wasn't a lot of people looking for stock wheels.

Mind you, this would have been 3 or 4 years ago. Too old, can't remember anymore.

[TouringTeg]

Type R tax is real

[tofu1413]

my old gun grey set i can't even give them away at $400 with ok falken azenis ! (that was 2011)

[oldsnail]

Or any honda with a RED engine valve cover. (s2k)

Type R tax is real

[Iron Chef]

I just sold my Usdm CW Itr wheels for $400 couple months ago

[TouringTeg]

I just sold my Usdm CW Itr wheels for $400 couple months ago

Damn :( I can accept white or grey. I can trade the grey for white to another ITR owner.

[tegra7]

If anyone has mud flaps for sale for 98-00 dc2 pls pm me.

[Iron Chef]

BNIB

[twitchyzero]

does the owner of this barn lurk in this thread?

https://www.youtube.com/watch?v=0oUzxOUGBUA

[77civic1200]

He is on a 1st gen civic facebook group that I follow

His Profile (https://www.facebook.com/rasmusgreenbeck?fref=gs&__tn__=%2CdlC-R-R&eid=ARBNwBax4FSrDRvLw7LPZa-fBObQLtCgKWs60oFudQQwf9uRqPavhSf0NulSZ4foBd9DH-IwjtTXqOgf&hc_ref=ARTQmSegbAs3aX3-mdWIHqg5I_y_ulbQw7iTLaPhC_1cU1NpyUo6rHz5_QzMr44njJ k&dti=21049967199&hc_location=group)

[tegra7]

BNIB

Do you have a bnib set?

[twitchyzero]

curious how he got his integra tucked in the back of the garage, Austin Powers style

He is on a 1st gen civic facebook group that I follow

His Profile (https://www.facebook.com/rasmusgreenbeck?fref=gs&__tn__=%2CdlC-R-R&eid=ARBNwBax4FSrDRvLw7LPZa-fBObQLtCgKWs60oFudQQwf9uRqPavhSf0NulSZ4foBd9DH-IwjtTXqOgf&hc_ref=ARTQmSegbAs3aX3-mdWIHqg5I_y_ulbQw7iTLaPhC_1cU1NpyUo6rHz5_QzMr44njJ k&dti=21049967199&hc_location=group)

[VR6GTI]

4 go jacks and your good to go

[twitchyzero]

neat
first time learning about them, makes sense these things exist
$1500 for a set though :fulloffuck:

[cococly]

I wonder why are there still 2 White 2018 ITR for sale at Westwood Honda, one of them was R-14XXX. It must have been gathering dust and leaves there since early 2018...

Dealer mandatory options, I guess?

[Bender Unit]

Dealer mandatory options

:agree: They sure aren't selling it at $42,745

donjalapeno the Saleman is Great thou :thumbsup:

[twitchyzero]

for the performance you get, that's a fair price
i guess for 2018s if they slashed it to 39998 they'd be gone
unless they are used...?

[320icar]

White CTR just down the street from me while I was walking my dog (~4 road and shell area). Same guy I assume who has the mk1 MR2 and used to have the 190e cosworth. Anyone on here?

[cococly]

for the performance you get, that's a fair price
i guess for 2018s if they slashed it to 39998 they'd be gone
unless they are used...?


Saw one earlier at a local non-Honda dealership for sale, a 2017 CW, for $40,000 + doc fee :lawl:


I found 2 more brand new 2018 FK8 for sale in BC for CAD$52,000 :denied: What are they thinking, it's 2019 already :fulloffuck:

[TouringTeg]

https://jalopnik.com/at-22-500-would-you-make-this-1998-acura-integra-type-1831606026