[twitchyzero]

OK if true I failed my own post...did it anyways.

I understand the the floor mats are thinner/lighter..and some SKU have thinner windshield and battery.

then again you have to question how much of a difference of cloth in weight it will actually save...a few lbs? seems more for bragging rights than serving a purpose/function

[tofu1413]

Seat design saves a few pounds, and especially so with the recaro SRD vs USDM seat.


glass and battery saves a few pounds.... few pounds here and there add up.

[SumAznGuy]

Don't be so hard on yourself Twitchy.
It's part of the whole appeal to the Type R, and in a small way the same with the Club Racer S2000's.
The CR S2000's make the same power but weigh about 90 lbs less than a standard S2000 with slight changes like stiffer springs and better steering rack and aero.
ITR weights less than a GSR, make a tad bit more power but has no sunroof.
Stiffer springs for better handing and the body design was supposed to be a little more areodynamic than a GSR.

In the end, it makes a little difference but helps a lot in selling the racer image.

[Iron Chef]

It's those details that as an ITR enthusiast you can nerd out on be an elitest to all other standard Integra and civic owners.:badpokerface:

[jasonturbo]

I used to be one of those ITR owning elitest pricks, glad I put that behind me and moved on to become a better person.

Now I'm an NSX owning elitest prick.

Soon to be GT4 elitist prick as well, base caymans are to the GT4 what the GS-R was to the ITR :nyan:

[tofu1413]

Jasonturbo be like: look at that red caliper'ed, wingless "Just an S model" peasant.

[tegra7]

I used to be one of those ITR owning elitest pricks, glad I put that behind me and moved on to become a better person.

Now I'm an NSX owning elitest prick.

Soon to be GT4 elitist prick as well, base caymans are to the GT4 what the GS-R was to the ITR :nyan:



I must be like jasonturbo. Going to move to Alberta and lay some pipe.

[!e.lo_]

I used to be one of those ITR owning elitest pricks, glad I put that behind me and moved on to become a better person.

Now I'm an NSX owning elitest prick.

Soon to be GT4 elitist prick as well, base caymans are to the GT4 what the GS-R was to the ITR :nyan:

Pretty sure you're just a prick.

[SumAznGuy]

don't forget the transmission as well... i was quoted $7k including opening up the transmission, for an engine that was still running.

Just finished my B18C swap into my CRX only to find out my cable B LSD tranny has a bad second gear that sometimes doesn't go into gear and grinds going into reverse. :okay:

[thumper]

Just finished my B18C swap into my CRX only to find out my cable B LSD tranny has a bad second gear that sometimes doesn't go into gear and grinds going into reverse. :okay:

:( :cry:

[jasonturbo]

Just finished my B18C swap into my CRX only to find out my cable B LSD tranny has a bad second gear that sometimes doesn't go into gear and grinds going into reverse. :okay:

Lol get the shoehorn out.

[tofu1413]

Just finished my B18C swap into my CRX only to find out my cable B LSD tranny has a bad second gear that sometimes doesn't go into gear and grinds going into reverse. :okay:



GM synchromesh time :awwyeah:

[tegra7]

GM synchromesh time :awwyeah:

That stuff destroyed the trans in my civic.

[tofu1413]

That stuff destroyed the trans in my civic.


got rid of my notchy 3rd gear :badpokerface:

[tegra7]

got rid of my notchy 3rd gear :badpokerface:

Mine got worse after a month

[TouringTeg]

Spent 8 hrs on Victoria Day traveling to Vancouver and back to Victoria. Picked up a stock Acura amber lit CD player and stock air box and tube from a 97 ITR. Mine had a 2001 GSR cd player and intake. The intake had an ugly rubber adapter coupling to fit the larger throttle body.

An ITR buddy hooked me up with the parts for $300 so it was worth the trip! R community is great. :h5:

http://img.photobucket.com/albums/v469/Touring240/Mobile%20Uploads/20160525_143511_zpsd912ocy0.jpg (http://smg.photobucket.com/user/Touring240/media/Mobile%20Uploads/20160525_143511_zpsd912ocy0.jpg.html)
http://img.photobucket.com/albums/v469/Touring240/Mobile%20Uploads/20160525_143359_zpsvhcvf0ay.jpg (http://smg.photobucket.com/user/Touring240/media/Mobile%20Uploads/20160525_143359_zpsvhcvf0ay.jpg.html)

[Iron Chef]

Your defog light is out

[tegra7]

Just finished my B18C swap into my CRX only to find out my cable B LSD tranny has a bad second gear that sometimes doesn't go into gear and grinds going into reverse. :okay:

https://vancouver.craigslist.ca/rds/pts/5604516221.html

[TouringTeg]

Your defog light is out

I never would have known thanks! Apparently it is very common for this bulb to go out

Just ordered a new bulb from Acura $6.50 +tax Had to order a few missing bolts as well.

Also anyone looking for red ITR seats?
http://www.ebay.ca/itm/CDM-JDM-Acura-Honda-Integra-Type-R-DC2-DC4-Recaro-Canadian-Front-Red-Seats-RARE-/191878919149?hash=item2cacdff3ed:g:Rv0AAOSwbPxXQKn U&vxp=mtr

[TRD Rs200]

frd went to take a look at the itr in N van with ssr wheels hooooly i was suprised at how bad the condition is. seller claims that there is 9k damage to the rear quarter panel only. but i see the seam sealer on the end panel is rusting. left quater panel has obvious mismatched color over sprays front bumper has been resprayed as well. rear bumper was red before cause the nh0 paint is peeling. all type r stickers are aftermarket metrotown quality. engine bay has lots of dried motor oil on the firewall. poor type R that needs alooooot of TLC

[westopher]

With that sort of mess, paying 25k for a nice one seems much more appealing.

[TouringTeg]

Trd rs 200 Did you guys drive it?

Sounds like a lot of stories

The truth is the Type R has never been an expensive car. There were many owners who lacked resources and maturity who did questionable repairs and modifications.

[Iron Chef]

Speaking of really poor quality R's what did you do to sumaznguy' old R?


frd went to take a look at the itr in N van with ssr wheels hooooly i was suprised at how bad the condition is. seller claims that there is 9k damage to the rear quarter panel only. but i see the seam sealer on the end panel is rusting. left quater panel has obvious mismatched color over sprays front bumper has been resprayed as well. rear bumper was red before cause the nh0 paint is peeling. all type r stickers are aftermarket metrotown quality. engine bay has lots of dried motor oil on the firewall. poor type R that needs alooooot of TLC

[TRD Rs200]

Speaking of really poor quality R's what did you do to sumaznguy' old R?

that R got a B18C swapped in and is back on the road. its still here with me, the rust got fixed and driven when its not raining only.

[TouringTeg]

I love how cheap replacement parts are. At least the non ITR specific parts. Paid $200 for an OEM RH front fender with VIN and mint (will replace poorly fitting aftermarket fender), passenger side mirror (my housing is cracked) and a plastic engine under tray (they always tear in the middle).

I was curious how many ITR are for sale in Canada right now. There used to be quite a few choices in BC, AB, and ON. Now I only see two.
The North Van $12,900 Work Meister with some claims on it and this one in Alberta.

Heavily modded:
1998 Acura Integra Type R Coupe (2 door) | used cars & trucks | Calgary | Kijiji (http://www.kijiji.ca/v-cars-trucks/calgary/1998-acura-integra-type-r-coupe-2-door/1169894842?enableSearchNavigationFlag=true)

All that is left is lots of WTB ads across the country. Very similar to what happened a few years ago when I was looking for a 964. There was 3 to choose from in Vancouver for $25,000. All C2 manuals. Then they were gone and nothing else came to market. Now they go for $40-50,000 CAD. Not sure ITR prices will ever go that crazy as the iconic 911 but certainly supply has dried up.

[!e.lo_]

That's considered "heavily modded" ?
:pokerface:

[tofu1413]

I love how cheap replacement parts are. At least the non ITR specific parts. Paid $200 for an OEM RH front fender with VIN and mint (will replace poorly fitting aftermarket fender), passenger side mirror (my housing is cracked) and a plastic engine under tray (they always tear in the middle).

I was curious how many ITR are for sale in Canada right now. There used to be quite a few choices in BC, AB, and ON. Now I only see two.
The North Van $12,900 Work Meister with some claims on it and this one in Alberta.

Heavily modded:
1998 Acura Integra Type R Coupe (2 door) | used cars & trucks | Calgary | Kijiji (http://www.kijiji.ca/v-cars-trucks/calgary/1998-acura-integra-type-r-coupe-2-door/1169894842?enableSearchNavigationFlag=true)

All that is left is lots of WTB ads across the country. Very similar to what happened a few years ago when I was looking for a 964. There was 3 to choose from in Vancouver for $25,000. All C2 manuals. Then they were gone and nothing else came to market. Now they go for $40-50,000 CAD. Not sure ITR prices will ever go that crazy as the iconic 911 but certainly supply has dried up.



hmm wonder if worth saving.

[lowside67]

I would be willing to remove pretty much any non-destructive bolt-ons, but a JDM front end is a deal breaker for me.

Mark

[Dinan3]

I was curious how many ITR are for sale in Canada right now. There used to be quite a few choices in BC, AB, and ON. Now I only see two.
The North Van $12,900 Work Meister with some claims on it and this one in Alberta.


That North Van one had 8 claims on it...

[thumper]

not everyone is openly advertising. i mentioned before the one at SR, and someone at fasttrack autobody has a PY one that is in storage that i'm told would sell if someone offered enough $, but it's not in the best of shape so it is unlikely to be going anywhere soon :(

[Iron Chef]

A lot of type r owners are hermits. I know a few and almost none of them post on any forums

[tegra7]

ITR Expo Forums: 1997 #00040 California $45,000 (http://forums.itrexpo.com/zerothread?id=17673)

[EndLeSS8]

Why would anyone pay $45k for a ITR?
That's crazy.


If you're going for clean and rare Honda's for $57k USD, you can get this almost completely stock MINT NSX with only 25k miles
Acura NSX Ultra RARE 25K Original Mile Original Paint NSX | eBay (http://www.ebay.com/itm/Acura-NSX-ULTRA-RARE-25K-ORIGINAL-MILE-ORIGINAL-PAINT-NSX-/291780780194)

[white rocket]

I'm sure there are lots of ITR's tucked away with owners who still love the car but have moved onto other things in life. They'll come out once the market warrants it(no, we're not quite there yet) or they want to enjoy them again. Lots of them do not partake in online discussions either so there are many that are just unknown.

The $45K one has been for sale for over a decade.

[thumper]

i have a friend in california who bought his brand new in 1997. it was both his daily and track whore for 10-15 years before the clutch and flywheel blew up at buttonwillow and messed up the transmission. it's been parked ever since in his garage... then he worked overseas in china for a bit, came back, got married and now he's just welcomed his second child, and all i can see of his itr is a little bit of the rear wing poking out from all the storage items piled up on top of it. he keeps saying he will fix it someday, won't sell it to me no matter how hard i try, and he now thinks it's going to be his nest egg for his kids' education fund.

[tegra7]

Wish we had this here in BC. https://youtu.be/5t87ZrEBE3U

[white rocket]

^^Make the trip!! It's an awesome experience. The ITR crew in the US are a great group of guys(and girls). Lots of fanboi ITR talk and lots of tech shit too. I went to Expo 8 and 9. Missed 10 due to a friends wedding and had the flight cancelled for 11 due to weather while transferring at O'Hare. I plan on attending again but maybe when the kidos get older.

[Iron Chef]

TE-37, Regamaster, K1's or stock , take your pick... Lol

[BIC_BAWS]

Just curious aha. Don't think I could forgive myself if I sold it.

;)

[TouringTeg]

Any ITR owners here have some 205/45/16 or 215/45/16 track tires they want to part with? Or 205/50/15

RE11, RE71, RS-3, R1R, RT615k, Rivals etc

[SumAznGuy]

Rebuilt status ITR with JDM front end.
Price is a tad high since it looks like it will need a bit of work.
2000 Acura Integra Type-R (Phoenix Yellow) (http://vancouver.craigslist.ca/van/cto/5647964799.html)

[TouringTeg]

Check out this 1999 CW CDM ITR 285kms. High mileage but clean title, maintenance and full repaint. $15,500 CAD

http://www.kijiji.ca/v-cars-trucks/barrie/1999-acura-integra-type-r-hatchback/1174438881?enableSearchNavigationFlag=true



http://i.ebayimg.com/00/s/ODAwWDgwMA==/z/pcgAAOSwjXRXYiNX/$_27.JPG

[!e.lo_]

http://i.imgur.com/4y2uFpel.jpg
http://i.imgur.com/ND0vPE2l.jpg

someone buy these two

[JordanLee]

https://scontent-lax3-1.cdninstagram.com/t51.2885-15/e35/13534100_595392927295892_180842478_n.jpg

[twitchyzero]

near 300k...nice to see one get daily'd
rebuilt motor generally means pushed too hard on the track?
I noticed s2000 and ITR changes hands often. Original/2nd owners seem to hold onto them and the ones for sale will likely have a half a dozen owners that's all 'babied' the car lol

[westopher]

https://scontent-lax3-1.cdninstagram.com/t51.2885-15/e35/13534100_595392927295892_180842478_n.jpg

Sweet merciful crap that looks good.

[GS8]

Why would anyone pay $45k for a ITR?
That's crazy.


If you're going for clean and rare Honda's for $57k USD, you can get this almost completely stock MINT NSX with only 25k miles
Acura NSX Ultra RARE 25K Original Mile Original Paint NSX | eBay (http://www.ebay.com/itm/Acura-NSX-ULTRA-RARE-25K-ORIGINAL-MILE-ORIGINAL-PAINT-NSX-/291780780194)

Someone got a steal on that one!

Also...

http://i291.photobucket.com/albums/ll310/Outrageousco/92%20nsx%2025k/IMG_0557_zpssizktovb.jpg

Does this not look like the happiest car in the fucking world? I know these cars make their drivers the happiest in the world.

[white rocket]

near 300k...nice to see one get daily'd
rebuilt motor generally means pushed too hard on the track?

Not at all. Motor internals wear down over time. Rings and valve stem seals are usually the culprit for oil buring issues. A rebuild can consist of new seals, rings, bolts, etc plus machining. Usually the valves would be replaced as well.

[Moo Man]

I miss my ITR :(

[white rocket]

holy moly!!! ^^this guy!! :hat: :thumbsup:

[Moo Man]

Yas, the Moo Man has returned! :toot:

[Jaffray]

Rebuilt status ITR with JDM front end.
Price is a tad high since it looks like it will need a bit of work.
2000 Acura Integra Type-R (Phoenix Yellow) (http://vancouver.craigslist.ca/van/cto/5647964799.html)

Saw it in person with a fellow RS'er.. don't know if it's the control arms he's saying in the ad, but for sure suspension work is needed front and rear of the car. Details like the ITR CF bezels in the interior are missing & there is evidence of poor repairs (frame-wise) to the front end as when you pop the hood

This one will need some tlc!

[tegra7]

A little off topic but I now have contact with the original owner of my ITR.

[twitchyzero]

nice...how did that come about?

[JordanLee]

Saw it in person with a fellow RS'er.. don't know if it's the control arms he's saying in the ad, but for sure suspension work is needed front and rear of the car. Details like the ITR CF bezels in the interior are missing & there is evidence of poor repairs (frame-wise) to the front end as when you pop the hood

This one will need some tlc!

CDM ITRs never had CF interior. I believe the 98+ ITRs in Canada did however get the slightly grey metallic plastic compared to the 94-97 solid black HVAC controls though. It was the USDM cars that had OEM CF bits (on some I believe, not sure if it was an option) and of course the special Type RX silvery-blue CF interior bits.

[TouringTeg]

From ITRCA. Realtime ITR in action

https://www.youtube.com/watch?v=gRxf5IHPlCM

https://www.youtube.com/watch?v=3V4ojEXA2P0

[thumper]

speedvision challenge. i can see the old logo on the passenger airbag cover. i used to skip out of everything and glue myself to the tv all day to watch. i miss those days :o

i also love the broadway mirror lol

[tegra7]

https://vancouver.craigslist.ca/rch/pts/5649756542.html

Cheap c5 long block

[tegra7]

http://www.revscene.net/forums/709470-fs-1997-acura-integra-type-r.html !!!

[TouringTeg]

Wow! Great deal

[thumper]

this thing is still kicking around... how long has it been? :confused:

1999 integra typeR - $8900 https://vancouver.craigslist.ca/pml/cto/5666981213.html

https://images.craigslist.org/00E0E_8PDvK0JUWzM_600x450.jpg

[white rocket]

I now have 00-0768 in my possession. Locked away and protected from the elements.

http://i81.photobucket.com/albums/j217/whiterocket/IMG_2067_zpseybyf1eu.jpg (http://s81.photobucket.com/user/whiterocket/media/IMG_2067_zpseybyf1eu.jpg.html)

Any why I bought her
http://i81.photobucket.com/albums/j217/whiterocket/IMG_2068_zps7y7wwkmn.jpg (http://s81.photobucket.com/user/whiterocket/media/IMG_2068_zps7y7wwkmn.jpg.html)

[Spectre_Cdn]

:bowdown:

The white_rocket ITR sanctuary

[RevYouUp]

this thing is still kicking around... how long has it been? :confused:

1999 integra typeR - $8900 https://vancouver.craigslist.ca/pml/cto/5666981213.html

https://images.craigslist.org/00E0E_8PDvK0JUWzM_600x450.jpg

Anyone look at this?

[thumper]

i could have sworn this was posted awhile back because we were all questioning the questionable knockoff recaro srd's... and for some reason the part about it being repainted is new to me.

[SumAznGuy]

i could have sworn this was posted awhile back because we were all questioning the questionable knockoff recaro srd's... and for some reason the part about it being repainted is new to me.

Didn't someone say the front end was repainted and a different shade of white from the rest of the car?
And of course the knock off seats.
And painted stock strut bar in the front.

[TouringTeg]

No Reserve: 49K-Mile 2001 Acura Integra Type R | Bring a Trailer (http://bringatrailer.com/listing/2001-acura/)

[twitchyzero]

the last few posts on this page :sweetjesus:

that 97 so hot right now

[tegra7]

I now have 00-0768 in my possession. Locked away and protected from the elements.

http://i81.photobucket.com/albums/j217/whiterocket/IMG_2067_zpseybyf1eu.jpg (http://s81.photobucket.com/user/whiterocket/media/IMG_2067_zpseybyf1eu.jpg.html)

Any why I bought her
http://i81.photobucket.com/albums/j217/whiterocket/IMG_2068_zps7y7wwkmn.jpg (http://s81.photobucket.com/user/whiterocket/media/IMG_2068_zps7y7wwkmn.jpg.html)

Will she ever crack 100k kms?

[white rocket]

Will she ever crack 100k kms?

I'd like to avoid it from a collector standpoint. I haven't put more than 5000 kms on my '99 since 2011 so I'm not worried about racking up the kms :P

It will see some highway trips and HPDE's over the next few years so I can't see it being driven more than 1000 kms per year.

[TouringTeg]

If you plan to autoX / DE etc your ITR a RHD example seems like a good low cost option. Clean title, CW 183km, $6700

Any downsides to the 96 model besides 4 lug?

96 Acura Integra Type-R (JDM) (http://vancouver.craigslist.ca/van/cto/5665288639.html)

[white rocket]

I just can't swing RHD. I wish I could as I'd have a few of them by now.

Smaller GSR brakes and 4 lug are the notable differences as the USDM/CDM came with the anemic cast header and the 4.4FD. The JDM '98 spec enjoyed the SS 4-1 2.5" collector header, 4.7xx FD, 16" wheels, CF spark plug cover, Momo w/airbag and some other subtle stuff. '00-'01 ITR's got the more aggressive intake camshaft and immobilizer. I'm sure I'm forgetting stuff.

[tegra7]

^Don't forget to update registry : 2000 Acura Integra Type R #00-0768 (http://www.integratyper.org/usdm/rides/000768/000768.htm)

[tofu1413]

I just can't swing RHD. I wish I could as I'd have a few of them by now.

Smaller GSR brakes and 4 lug are the notable differences as the USDM/CDM came with the anemic cast header and the 4.4FD. The JDM '98 spec enjoyed the SS 4-1 2.5" collector header, 4.7xx FD, 16" wheels, CF spark plug cover, Momo w/airbag and some other subtle stuff. '00-'01 ITR's got the more aggressive intake camshaft and immobilizer. I'm sure I'm forgetting stuff.

Noticed my 96 was missing rear wiper (my 2000 usdm had a rear wiper)

Supposed to have thinner glass on the J spec cars.

Different front and rear crash bars.

Fuel cut was higher on j spec car.

Smaller battery on J spec (if oem 96 battery size)

Gear 4-5 taller to compensate for shorter final drive on 98+ transmission.

J spec has different fuel Evap system.

All I can think of from the top of my head to add to j spec difference.


Some type Rs were missing air bags. (Some 98+ were sold without front air bags and some 96 as well)

[tofu1413]

If you plan to autoX / DE etc your ITR a RHD example seems like a good low cost option. Clean title, CW 183km, $6700

Any downsides to the 96 model besides 4 lug?

96 Acura Integra Type-R (JDM) (http://vancouver.craigslist.ca/van/cto/5665288639.html)

Motor probably due for a top end rebuild, minimum. Refresh engine head and vavletrain.

[white rocket]

all correct tofu1413. no rear wiper on '96(same as '97 US), so no rear nozzle either.

'98 spec offered a "race base" with no airbag, no abs, no third brake light and a manual rack. Different Momo wheel and a smooth dash where the passenger airbag goes. Not sure if a '96 spec was offer in a similar fashion.

The registry has been updated but Matt put QC instead of BC for my '99.

[tofu1413]

96 spec should be offered no airbag as well, as early best motoring videos featured non srs momo steering wheels and a clean smooth dash board.

Also came with that rare Honda double din radio delete plate.


I had a 96' non srs momo steering wheel in my 00' ITR before. Good steering wheel and the perfect size.


Also. Later jdm cars had 1mm larger rear sway bar I think and slightly different suspension settings ( I think rear camber and mildly revised spring rates)

Machine ported intake ports vs hand ported intake ports on earlier cars.

JDM block had higher compression ratios too!

So many mild differences.

[swfk]

Random thought, anyone interested in a Honda meet? Type Rs, NSXs, S2000s, Euro Rs(RonaldTypeR and Tofu1413 :troll: )

Should plan something lol

[!e.lo_]

you mean a ricer meat?

[loong]

Random thought, anyone interested in a Honda meet? Type Rs, NSXs, S2000s, Euro Rs(RonaldTypeR and Tofu1413 :troll: )

Should plan something lol

chatime. enough said.

[tofu1413]

Type R tuesday meet.



Tomorrow.




@ chatime Richmond Blundell?



1) tofu1413

[jasonturbo]

1) tofu1413
2) jasonturbo

:troll:

[white rocket]

Random thought, anyone interested in a Honda meet? Type Rs, NSXs, S2000s, Euro Rs(RonaldTypeR and Tofu1413 :troll: )

Could get outta control quick. Start with ITR's and NSX's but leave it "open" to Honda's. You'll get all the shit box Civic ricers showing up with their x9 stanceness, multicolor bays and zip ties everywhere. Not that I hate on that but it's a far cry from a distinguished meet with mature owners.

The only "real" way to do it is for someone who knows of all the owners on here to reach out via PM and organize something on the DL. The ITR meets from '04-'08 were great but sadly most have moved on and no one(including myself) stepped up to take over the organization.

[Jgresch]

No Type R, no care. Leave your base models at home peasants.

[!e.lo_]

fyi, the motorcycle guys meet on Tuesday at BBT shop in Richmond.
RS discount too.

[kr4l]

I'm all for having you guys at the bubble tea shop under superstore in Richmond

Bike guys usually meet at 7pm until whenever. 30% off. Let me know

-edit: all I ask is to limit it to type r's, nsx, s2000. Mature crowd. No bs. Free bbt if you let me take your nsx for a spin :)

[swfk]

Could get outta control quick. Start with ITR's and NSX's but leave it "open" to Honda's. You'll get all the shit box Civic ricers showing up with their x9 stanceness, multicolor bays and zip ties everywhere. Not that I hate on that but it's a far cry from a distinguished meet with mature owners.

The only "real" way to do it is for someone who knows of all the owners on here to reach out via PM and organize something on the DL. The ITR meets from '04-'08 were great but sadly most have moved on and no one(including myself) stepped up to take over the organization.

Yeah I was thinking about that. I was thinking of starting a private, invite only group. Elitist BC Honda essentially lol

[westopher]

Do a "special cars for the late 20s early 30s grumpy RS members who graduated near the turn of the millennium meet"
993s, e36/46 m3s e39 m5s, type Rs, s2ks, NSXs, etc.
Now thats meet I can get behind. We can drink coffee, complain about how boring new cars are, talk about our grossly inflated real estate purchases and how we work too much.

[jasonturbo]

Do a "special cars for the late 20s early 30s grumpy RS members who graduated near the turn of the millennium meet"


:okay:

[freelunch]

I'm interested in a meet ! But choose a rain free day please, I hate having to wash my car afterwards.

[westopher]

Fine we can do a "was scheduled stop going to secondary school near the turn of the millennium meet."

[!e.lo_]

I'm interested in a meet ! But choose a rain free day please, I hate having to wash my car afterwards.

forecast calls for sun tomorrow.

[TouringTeg]

Someone bring a tablet and I will facetime / Skype leaning against my car :nerd:

[H.Specter]

Do a "special cars for the late 20s early 30s grumpy RS members who graduated near the turn of the millennium meet"
993s, e36/46 m3s e39 m5s, type Rs, s2ks, NSXs, etc.
Now thats meet I can get behind. We can drink coffee, complain about how boring new cars are, talk about our grossly inflated real estate purchases and how we work too much.

http://www.reactiongifs.com/r/nsr.gif

[tegra7]

I used to be a shithead civic owner with stretched tires on xxr wheels a couple years ago.

[kr4l]

7pm The bubble tea shop, Richmond under superstore. Park in the very back s/w corner. Revscene discount 30%. Let my staff know when ordering

Disclaimer: please please please act like adults. This isn't my property. This isn't a revscene meet. It's just a bunch of mature people having bbt and debating about our real estate situation

[Jgresch]

7pm The bubble tea shop, Richmond under superstore. Park in the very back s/w corner. Revscene discount 30%. Let my staff know when ordering

Disclaimer: please please please act like adults. This isn't my property. This isn't a revscene meet. It's just a bunch of mature people having bbt and debating about our real estate situation

Are there any pokestops nearby?

[!e.lo_]

7pm The bubble tea shop, Richmond under superstore. Park in the very back s/w corner. Revscene discount 30%. Let my staff know when ordering

Disclaimer: please please please act like adults. This isn't my property. This isn't a revscene meet. It's just a bunch of mature people having bbt and debating about our real estate situation

won't do what we did last time then :badpokerface:

[thumper]

blast from the past.

sadly... no subtitles.

https://youtu.be/aWiGAS1CbgA https://youtu.be/Jan4sYEX4lE
https://youtu.be/p7ch9h9fRLA https://youtu.be/Wt_o0LBES3g

[tegra7]

How much motor oil are your ITR's consuming? I average about 700ml every 300km or so.
i've had a leakdown and compression test done. The oil control rings are seem to be the culprit.

[loong]

1L for a 8 sessions at the ridge.

[boibuddha]

Ouch, that's basically a quart with every tank of fuel.

My GSR block burns anywhere from 1-3L between oil changes, depends on how much vitamin "V" I am willing to take.

[RevYouUp]

My GSR runs pretty well, 500ml-1L between 5k oil changes. I have 272k on my motor as well

[tofu1413]

How much motor oil are your ITR's consuming? I average about 700ml every 300km or so.
i've had a leakdown and compression test done. The oil control rings are seem to be the culprit.



that doesn't sound normal... :badpokerface: topping up every time you fill the gas tank!

[white rocket]

I used to go through 1L+ at each track day :P. I kept it topped up after each session and never had an issue for 2 years. Now that the motor is built, zero oil burning issues. It almost doesn't feel right not burning oil now. Such a trademark B series occurrence.

[thumper]

my old 98 would only burn hard when i was getting into vtec all the time, or extended highway driving. i had to keep a quart of oil in the back and check the level every time i went for gas. but if i stayed in the city grinding in rush hour traffic it burned very little.

[!e.lo_]

city+highway, no VTAK, doesn't need to be topped up. I would check every gas fillup.

At track.. lol top up like 0.5-1L per every two sessions. so pretty close to 3L a full day.

[tegra7]

65km since my last wash.
http://i278.photobucket.com/albums/kk89/amit87/Mobile%20Uploads/2D420588-93F3-475C-8CF3-00BA4F2CF287.jpg (http://s278.photobucket.com/user/amit87/media/Mobile%20Uploads/2D420588-93F3-475C-8CF3-00BA4F2CF287.jpg.html)

[SumAznGuy]

I learned the hard way on my ITR.
Topped off the oil before the first session, spun a rod bearing before the first session ended at ORP.
Burned 1L of oil in each of the 20 min sessions at PR and Ridge with my stock GSR motor.

But both motors burned very little oil when out of Vtec, but what fun is that?

Also learned not to put anything directly behind the exhaust when the car is parked.
Upon startup, my toolbox was covered in that black soot. :okay:

[Iron Chef]

I was in the same boat , I used to burn 1L/1000km

Did a full oem rebuild, os Pistons , bearings , guides , valves.

I now burn 0.5L 5000km
I burned 1L for 7 sessions at the ridge + the drive to and from Shelton.

looks like she needs a rebuild , the only advice I can offer
Is do a full rebuild with os Pistons , guides and valves.

[thumper]

any concerns about all this oil fouling up the catalytic converter? this is assuming not all of you are running a test pipe?

[SumAznGuy]

The cat runs really hot. I would think it would be able to burn off the oil once it gets up to proper operating temps.

[tegra7]

I was in the same boat , I used to burn 1L/1000km

Did a full oem rebuild, os Pistons , bearings , guides , valves.

I now burn 0.5L 5000km
I burned 1L for 7 sessions at the ridge + the drive to and from Shelton.

looks like she needs a rebuild , the only advice I can offer
Is do a full rebuild with os Pistons , guides and valves.

Whats the approx cost for a rebuild?

[jasonturbo]

Whats the approx cost for a rebuild?

Depends on the scope of rebuild, if everything is in good shape and you just go with OS pistons and rings, bore/hone, new ACL bearings for mains/rods, and new valve seals you would probably be able to get all the parts and machine work for around 2000-2500$.

Keep in mind at that price you would have to remove engine and assemble the completed long block, the shop would assemble the bottom end only and re-install the valves in the head.

Maybe talk to G5?

I only ever had one B series that burned *almost* no oil, the one that was in my PY ITR, it was a very strong engine too :)

It might be worth doing the valve seals first, these can be done with the timing belt on and the engine in the car (Compressed air to keep valves from dropping after keepers are removed).

I know this sounds retarded but sometimes I've wondered if the b series engine just pulls so much vacuum that it draws more oil down the valve shaft than a "normal" engine.

[swfk]

Tegra7 you don't want it anymore eh? :badpokerface:

2000 Acura Integra Type R (http://seattle.craigslist.org/see/cto/5693097582.html)

[tegra7]

Depends on the scope of rebuild, if everything is in good shape and you just go with OS pistons and rings, bore/hone, new ACL bearings for mains/rods, and new valve seals you would probably be able to get all the parts and machine work for around 2000-2500$.

Keep in mind at that price you would have to remove engine and assemble the completed long block, the shop would assemble the bottom end only and re-install the valves in the head.

Maybe talk to G5?

I only ever had one B series that burned *almost* no oil, the one that was in my PY ITR, it was a very strong engine too :)

It might be worth doing the valve seals first, these can be done with the timing belt on and the engine in the car (Compressed air to keep valves from dropping after keepers are removed).

I know this sounds retarded but sometimes I've wondered if the b series engine just pulls so much vacuum that it draws more oil down the valve shaft than a "normal" engine.

G5 quoted me 5k for a full rebuild. The leakdown test showed the valve seals/ guides to be just fine. Just the bottom end needs a rebuild.

[tegra7]

Tegra7 you don't want it anymore eh? :badpokerface:

2000 Acura Integra Type R (http://seattle.craigslist.org/see/cto/5693097582.html)

Feeler ad. Would love to get US $ for it.

[TouringTeg]

I bet will sell. Mileage is low and no claims! List on ITR Expo and HT for sure.

[Port Man]

^ sell your em1? no sig

[Iron Chef]

i did an oem rebuild with new jdm itr os pistons, anything rubber like hoses and o-rings got replaced with oem, did all valve guides with new oem valves

i did the engine re/re and engine assembly.

basically for just parts and machine work was approx 4k to do a full oem rebuild. i may have spent a little more updated some parts like clutch and flywheel but i would at least budget 4k.

Whats the approx cost for a rebuild?

[tegra7]

I bet will sell. Mileage is low and no claims! List on ITR Expo and HT for sure.

Not very enthusiastic about selling. It will take me ages to find another claim free shell or maybe never.

[TouringTeg]

^ sell your em1? no sig

Finally sold to a buyer from Surrey. I am selling the 17" Volk TE37 as the buyer had their own wheels.

[Suprarz666]

hey guys I know this isn't a for sale thread but I have a set of these.

JDM Integra Type R Wheels (http://vancouver.craigslist.ca/bnc/wto/5697094087.html)

If someone on RS is interested, you can have them for $100. First one to PM me gets it.

They are in mediocre condition. Great for winter or a proper refinish.

edit: SOLD thanks guys.

[TouringTeg]

ITR Expo Forums: WA: 1998 Acura Integra Type R (http://forums.itrexpo.com/zerothread?id=17818)

A really nice 98 CW if anyone is looking. Even with the dollar.

Edit: paint is not original. Buyer flew from California and is angry.

[TouringTeg]

Bought some EDM LHD ITR floor mats on ebay today. About $200 CAD shipped from Hungary. I can't bring myself to use my new in the package 2001 mats until the paint is restored. (Thanks for the mats jasonturbo)

Honda Acura Integra DC2 Type R Floor MAT Carpet SET LHD Genuine ITR 1995 01 | eBay (http://m.ebay.ca/itm/Honda-Acura-Integra-DC2-Type-R-FLOOR-MAT-CARPET-SET-LHD-Genuine-OEM-ITR-1995-01-/141999360003?txnId=1294730677004)


Rebuilt status ITR with JDM front end.
Price is a tad high since it looks like it will need a bit of work.
2000 Acura Integra Type-R (Phoenix Yellow) (http://vancouver.craigslist.ca/van/cto/5647964799.html)

This ITR went down to $8000 firm and listing is gone today.

[tofu1413]

8k.


wonder who scooped it up!

[twitchyzero]

just curious...you guys would rather buy rebuilt over RHD?

[tegra7]

^Neither

[twitchyzero]

jut seems like JDM 150ish kms would sit around the market for 7-8k...but LHD rebuilts with higher kms once in the 8-10k they'll go pretty fast.

[Iron Chef]

So who was cruising to porteau cove last night ?

[TouringTeg]

jut seems like JDM 150ish kms would sit around the market for 7-8k...but LHD rebuilts with higher kms once in the 8-10k they'll go pretty fast.

Finding the bottom is kind of interesting. Both are hard to sell. I think I would rather have a LHD rebuild to beat on the track. I had RHD in the past and have no desire to own one again.

Next option would be higher mileage LHD. There is a 99 CW in Toronto with 282kms for about $12k CAD. JDM motor, front end, wheels, seats etc. Not a collector car but if well maintained could be a lot of fun for the money. (No mention of VINs, accidents or rust.)

Cars For Sale: Integra TYPE-R's - July/Aug 2016 - Honda-Tech (http://honda-tech.com/forums/acura-integra-type-r-8/cars-sale-integra-type-rs-july-aug-2016-a-3281287/)

http://cimg9.ibsrv.net/gimg/honda-tech.com-vbulletin/900x1200/80-2016_07_25_19_55_48_resized_7b5435fb2a48be3074b71c 743401ada4cad1ab69.jpg

[tofu1413]

^ $12k car... looks like a good candidate for heavy mods and butchering for track day

[loong]

JDM Front in Vancouver

https://vancouver.craigslist.ca/van/pts/5712230791.html

[Jgresch]

2000 ACURA INTEGRA TYPE R (http://www.srautogroup.com/#/inventory/2000-honda-integra-type-r-championship-white-1470441259)123

[tegra7]

212000km, 2 accidents and modded to the hilt for 30k? Lawl...

[VR6GTI]

lol worth like 15-20 max

[swfk]

I've seen it in person and it is immaculate. It'd cost more to restore and build to that spec.

[twitchyzero]

unless you have photos with panels off, i auto-assume any lhd ITR with jdm front has been in an accident...wouldn't even believe a clean carfax/icbc report.

so in that vehicle's defense it's being transparent not to mention all mods are OE/Spoon and highly sought-after. I can see someone who wants a complete package pay a small premium and take it for 25k or pretty darn close to asking

[kobe tai]

Anyone follow Shg_Dan on IG? Pretty crazy ITR restoration project. Too bad its RHD but level of detail is nuts.

https://scontent-sea1-1.cdninstagram.com/t51.2885-15/e35/13108935_637821709709210_1644646233_n.jpg
https://scontent-sea1-1.cdninstagram.com/t51.2885-15/e35/11420943_1718216271783358_1575528434_n.jpg
https://scontent-sea1-1.cdninstagram.com/t51.2885-15/e35/13395114_1604237703221207_1844585014_n.jpg
https://scontent-sea1-1.cdninstagram.com/t51.2885-15/e35/13651740_487758124764157_1569376069_n.jpg
https://scontent-sea1-1.cdninstagram.com/t51.2885-15/sh0.08/e35/p750x750/13597661_1550072485300868_587002327_n.jpg
https://scontent-sea1-1.cdninstagram.com/t51.2885-15/e35/13385817_516213331912851_458181327_n.jpg
https://scontent-sea1-1.cdninstagram.com/t51.2885-15/e35/13397685_246267642410331_1186457761_n.jpg
https://scontent-sea1-1.cdninstagram.com/t51.2885-15/e35/13649110_1558493744446937_1330238074_n.jpg
https://scontent-sea1-1.cdninstagram.com/t51.2885-15/e35/13395132_1163530387000419_503487985_n.jpg

[tegra7]

1999 Integra type r | used cars & trucks | Edmonton | Kijiji (http://www.kijiji.ca/v-cars-trucks/edmonton/1999-integra-type-r/1182407311?enableSearchNavigationFlag=true)

[Mr.Money]

rare to find collector status type-r.


it's either rebuild or bust.

[jasonturbo]

1999 Integra type r | used cars & trucks | Edmonton | Kijiji (http://www.kijiji.ca/v-cars-trucks/edmonton/1999-integra-type-r/1182407311?enableSearchNavigationFlag=true)

Maybe I should just buy one more...

[white rocket]

1999 but in yellow? waddup with that? a repaint for sure.

Anyone follow Shg_Dan on IG?

Super cool dude. He's restoring his that he's owned and tracked for years. Giving love to a car that's done the same for him for years. It's a damn near love story. haha! Seriously though, the paint quality for the inner fenders is better quality than most complete high end paint jobs. Truly amazing!! His post about the bolt markings and torque specs is just a crazy attention to detail.

[Jgresch]

1999 Integra type r | used cars & trucks | Edmonton | Kijiji (http://www.kijiji.ca/v-cars-trucks/edmonton/1999-integra-type-r/1182407311?enableSearchNavigationFlag=true)

http://i.ebayimg.com/00/s/NjAwWDgwMA==/z/RFcAAOSwIgNXiWjR/$_27.JPG
:ahwow:
http://i574.photobucket.com/albums/ss188/Jgreschner/itr1-1.jpg

[!e.lo_]

that's what it reminds me of

[EndLeSS8]

Saw a white Type R yesterday, parked near Fraser and 32nd

Quite nice. JDM front, carbon Spoon lip, grey JDM Type R wheels, with a unique wing, looked like the regular Type R wing in white but with a black tail on it.

Was driving past it, couldn't tell if it was RHD or LHD. No photos because of driving

Anyone here?

[tofu1413]

^ probably my old ride... its got a gurney flap on it now on the stock wing, and has been cleaned up quite a bit since i sold it.


https://scontent.xx.fbcdn.net/v/t1.0-9/11745883_10153153179591559_7434169656328176009_n.j pg?oh=7a0da8373268c9d60084d450d63eb6ca&oe=5817AB55

[meme405]

His post about the bolt markings and torque specs is just a crazy attention to detail.

Your referring to him Marking a line on the bolts, and coming back to check and re torque after he shakes down the car?

I can only imagine that he's only doing this on vital components like suspension, driveline, and such. He can't possibly be going back to bolts inside the door panels, and such. Then again with the attention to detail on his car, maybe he is. I'm totally with you, that car is insane.



I love that we have gotten to a point where people are now doing restomods on cars that our generation grew up with. Gives a lot of perspective to what the guys who grew up around 60's and 70's muscle went through in the late eighties and nineties, when they first started restoring muscle cars.

I mean rotisserie restorations on old muscle and retro cars is nothing new today. But it's not often you see Honda's, Nissan's, and toyota's of our tuner generation receiving this type of treatment. And the older these cars get, the more we get to see these kinds of sick builds.

It's actually going to drive in a whole new breed of shop, the older guys from my generation wanting to re-live their youth in S2k's, Integra's, Supra's, S15's etc. Looking for shops and people who are well versed enough in these cars to find parts, fabricate components, and bring new life to these cars. It'd be an interesting market to see who capitalizes on it.

[white rocket]

^^Yes, suspension and driveline primarily.

I agreed with your spoiler whole-heartedly.

[RevYouUp]

Seems like people look down on RHD itrs. Even though the 96 specs are 300 lbs lighter than LHD ones. I'd rather buy a RHD in lower mileage, better condition for half the price of a somewhat beat LHD counterpart.

[white rocket]

My only gripe with RHD is dealing with it in a LHD world. I'd love to have a '96 spec DC2R coupe and a '98 spec DB8R sedan in my fleet and could probably pick up both for less then I paid for my most recent ITR. But, driving them around is a massive PITA for me. I'm thinking most other people would feel the same. Nothing against RHD, but dealing with shit drivers in the GVRD is bad enough. I don't need another difficult variable to contend with.

[thumper]

what are the issues? the usual criticisms i hear are parking booths, toll machines, left turns and drive thrus.

[tegra7]

ICBC would be quick to write off a jdm vehicle if involved in a collision. They like to source out parts locally, highly doubt they would replace a jdm front.

[westopher]

what are the issues? the usual criticisms i hear are parking booths, toll machines, left turns and drive thrus.
Thats not like its just a minor issue.....
Right turns, passing on the highway, etc.
Anyone who says you get used to it is either full of shit or has a 9 foot long extendable neck.

[jasonturbo]

Thats not like its just a minor issue.....
Right turns, passing on the highway, etc.
Anyone who says you get used to it is either full of shit or has a 9 foot long extendable neck.

Mehhh RHD, I had an R32 Skyline for a few months, I got used to driving it around Deadmonton pretty quick, seemed reasonably safe... and man oh man are those R32 Skyline seats comfy.

Car was bought for the parts, everything was swapped into my 240SX lol

But for the record, I was/am RHD hater to the max... mainly because I can't seem to shift with my left hand... I also struggle to fap with left hand, might as well be using my feet or a cheese grater etc.

[Jaffray]

I don't know about you guys but I'm okay with my rhd itr. You actually do get used to it believe it or not.

Only down sides I had so far would be the parking booths.. nothing beats a good stretch for the other side! And as for left turns, I either look under the vehicles to see if any are coming my way or just wait for red :joy:

[tofu1413]

^ what he said. Only incident I had was when someone crashed into me! (And crashed into usdm driver side).

[Akord]

Saw a white Type R yesterday, parked near Fraser and 32nd

Quite nice. JDM front, carbon Spoon lip, grey JDM Type R wheels, with a unique wing, looked like the regular Type R wing in white but with a black tail on it.

Was driving past it, couldn't tell if it was RHD or LHD. No photos because of driving

Anyone here?

Werd. Chilling at a buddy's.
Don't think it's ur prev car tofu. Belonged to another RS member ages ago.

[white rocket]

mainly because I can't seem to shift with my left hand...

This. Along with all the other stuff peeps mentioned. I too drove an R32 GTS many years ago as my first intro to RHD. Rowing through the gears from the outward postion inward just felt weird as fcuk. Like going from 5th to 1st. Left hand shifting is also weird.

I wouldn't say that you get used to it, more like you learn to deal with it. Me personally, I just found it annoying. While there are a few cars that I'd love to have that were only built in RHD variants I still can't bring myself to enjoy it enough to purchase one. If I could, I'd be dailying tofu's EuroR right now.

[RevYouUp]

I need an EK9 in my life

[tofu1413]

This. Along with all the other stuff peeps mentioned. I too drove an R32 GTS many years ago as my first intro to RHD. Rowing through the gears from the outward postion inward just felt weird as fcuk. Like going from 5th to 1st. Left hand shifting is also weird.

I wouldn't say that you get used to it, more like you learn to deal with it. Me personally, I just found it annoying. While there are a few cars that I'd love to have that were only built in RHD variants I still can't bring myself to enjoy it enough to purchase one. If I could, I'd be dailying tofu's EuroR right now.



buy a battle gear 4 machine -->> practice --> shift with left hand -- > ????? --> profit!

[Expresso]

Werd. Chilling at a buddy's.
Don't think it's ur prev car tofu. Belonged to another RS member ages ago.

lol BIG D pops out of nowhere for this thread!

[tegra7]

I was in the same boat , I used to burn 1L/1000km

Did a full oem rebuild, os Pistons , bearings , guides , valves.

I now burn 0.5L 5000km
I burned 1L for 7 sessions at the ridge + the drive to and from Shelton.

looks like she needs a rebuild , the only advice I can offer
Is do a full rebuild with os Pistons , guides and valves.

Excuse my ignorance, but what are "os" pistons? Should I replace rods as well?

[westopher]

oversized pistons I'd assume to increase compression.

[prudz]

Spotted a realllllllll clean white integra with spoon calipers and blue lug nuts over by UBC this evening. Gave the thumbs up from a bike I was rolling around on. Not sure if the owner is on these boards but just wanted to say that thing looks really nice.

[TouringTeg]

I had a RHD R32 GTR for a while. As mentioned there are situations where it is not ideal (left turns and passing). RHD cars do not get a lot of respect and many will not consider them collectible. This keeps the prices affordable for those who just want to drive. It means you can get a RHD ITR, AP1, MKIV Supra, Z32, etc for much cheaper and that's a good thing.

This week I received some EDM mats off ebay for daily use. About $190 CAD shipped.

I am looking at getting some wheels/tire for the track soon :thumbs:

http://img.photobucket.com/albums/v469/Touring240/Mobile%20Uploads/20160810_162402-1_zpswuhwatop.jpg (http://smg.photobucket.com/user/Touring240/media/Mobile%20Uploads/20160810_162402-1_zpswuhwatop.jpg.html)
http://img.photobucket.com/albums/v469/Touring240/Mobile%20Uploads/20160810_163302_zpshhzhnevy.jpg

[twitchyzero]

exactly...it's nice that JDM variants are affordable

[white rocket]

Excuse my ignorance, but what are "os" pistons? Should I replace rods as well?

He's speaking of oversize pistons. When you rebuild the block it is usually treated to a bore and hone. This will increase the bore size slightly. Honda offers "OS" pistons that are 1/4 mil(81.25mm instead of the stock 81mm) bigger to compensate for that extra material that was removed. Adding to that, some may choose the JDM OS pistons which will increase compression from 10.6:1 to 11.1:1 due to higher peaked domes.

You won't need new rods but you should get new rod bolts (ARP).

[jasonturbo]

I had a GS-R moment today.

Was driving the GT4 and some homo in a tinted out Cayman GTS was flashing me his pearly whites and giving me the thumbs up.

My GF was looking at him like

http://i1.kym-cdn.com/entries/icons/original/000/014/285/not.jpg

[prudz]

He's speaking of oversize pistons. When you rebuild the block it is usually treated to a bore and hone. This will increase the bore size slightly. Honda offers "OS" pistons that are 1/4 mil(81.25mm instead of the stock 81mm) bigger to compensate for that extra material that was removed. Adding to that, some may choose the JDM OS pistons which will increase compression from 10.6:1 to 11.1:1 due to higher peaked domes.

You won't need new rods but you should get new rod bolts (ARP).

If i'm not mistaken, if you choose to go with ARP rod bolts it is also recommended you have your rods shot peen'd

[Mr.Money]

I had a GS-R moment today.

Was driving the GT4 and some homo in a tinted out Cayman GTS was flashing me his pearly whites and given me the thumbs up.

My GF was looking at him like

http://i1.kym-cdn.com/entries/icons/original/000/014/285/not.jpg
Now things are getting kinky, ja??
http://2.bp.blogspot.com/-92p6Ce7S6A0/TbBTFwct97I/AAAAAAAADJY/X0vmmy8QdNQ/s1600/Kinky%20Germans.jpg

[TouringTeg]

$8000 JDM 95 Type R? I think this was $9000 when first listed this morning.

https://vancouver.craigslist.ca/van/cto/5734795472.html

[RevYouUp]

$8000 JDM 95 Type R? I think this was $9000 when first listed this morning.

https://vancouver.craigslist.ca/van/cto/5734795472.html

It sold for 6200 couple weeks ago

[Spaceship_coupe]

Please enjoy the vid as I did. His closing comments make me want to drive one as I have not had the pleasure yet.

https://youtu.be/1_pepo98Cbg

[thumper]

why is this one so familiar? not many out there with mugen wheels... was it on craigs before? someone from RS? :confused:

Jdm 96 Spec Honda Integra type R - $10000 (Vancouver) https://vancouver.craigslist.ca/van/cto/5739719250.html

http://images.craigslist.org/00I0I_lPCveknTw9o_600x450.jpg

[Jgresch]

why is this one so familiar? not many out there with mugen wheels... was it on craigs before? someone from RS? :confused:

Jdm 96 Spec Honda Integra type R - $10000 (Vancouver) https://vancouver.craigslist.ca/van/cto/5739719250.html

http://images.craigslist.org/00I0I_lPCveknTw9o_600x450.jpg

Yea was listed previously for around the same price. He's been to RS meets before.

[white rocket]

^^I almost bought that one last year for $9500. Baller parts on top of a nicely maintained '96 spec. Still a decent buy right now.

[loong]

You dont need another one lol. Unless its a milano red one.

[thumper]

c'mon never deny someone the right to hoard itr's :thumbsup:

[thumper]

one more RHD. it's been for sale on craigs for a bit of a while now, but the price took a sudden freefall, only because the seller is taking parts off... from the description i am going to assume the seller is going to put stock brakes and wheels on it. but wasn't this asking like $14k + before? still for that mileage it dosen't feel like a good buy?

1996 Honda Integra Type R RHD - $9999 (Vancouver) https://vancouver.craigslist.ca/nvn/cto/5722752722.html

http://images.craigslist.org/00s0s_iFuopsUZr4t_600x450.jpg

[white rocket]

^^Decent buy. He has a "build" thread on H-T. Nice car and looks well kept. I'm no judge on the RHD market though. Mostly just looking at what each part could be worth if bought in today's market individually.

[tofu1413]

yeah that one is quite nice.



pretty solid guy too.

[tegra7]

It's back..
https://vancouver.craigslist.ca/van/cto/5745538546.html

[wingies]

It's back..
https://vancouver.craigslist.ca/van/cto/5745538546.html

Right now his "8000 FIRM" is probably 7000obo

[Port Man]

ad is gone? what was it? itr @ top of page was the one last year from Quesnel

[thumper]

Right now his "8000 FIRM" is probably 7000obo

i'm guessing you were right because i didn't get to see the ad before it was deleted :confused:

[TouringTeg]

It was the yellow one JDM front rebuilt title now $8000 FIRM

No details in the ad about the accident

I would rather have the 96 JDM with Mugen MF8 / Spoon parts. Looks like a solid buy

[Phat_R]

BACK from the dead.

About 18 months ago I was in a front end collision with my beloved Type R -- a retarded N driver made a left hand turn in front of me at the last second because he wasn't looking for oncoming traffic. Anyways long story short -- ICBC didn't write off my car and instead gave me $22K to fix --- 18 months later she's all done. Huge thanks to Russ at Tom's Custom Autobody for doing such an amazing job. Props to the guys at Garage Five for getting all the J's Racing goodies. Now I'm shopping for new rims to fit the widebody. Suggestions?

I also have a Mugen Gen2 wing for sale -- I will sell to highest bidder

https://instagram.com/p/BJeTEUfBuRoAv4QEqt2UJLe8Y4baIZTAOdmy0E0/

[loong]

holy smokes!!

you need these wheels to fit that widebody NWP4LIFE - Honda Forum and Network: FS: Rare Volk CE28N 16x9 +25 / 16x8.5 +30 (http://forums.nwp4life.com/zerothread?id=50461)

http://c1.staticflickr.com/8/7438/26973427504_6ab196b38c_c.jpg

https://farm8.staticflickr.com/7223/26824067442_ab77c20a6b_o.jpg

[Phat_R]

I already have Ce28Ns on my car -- looking for something different actually. and staggered setup is not what I want for a track car

[white rocket]

Just gonna leave this here for ya......

http://i81.photobucket.com/albums/j217/whiterocket/ze40_blue_02_zpsdvs1ejk7.jpg (http://s81.photobucket.com/user/whiterocket/media/ze40_blue_02_zpsdvs1ejk7.jpg.html)

http://i81.photobucket.com/albums/j217/whiterocket/volk-racing-ZE40-bronze_jpeg_zpsefbomn4u.jpg (http://s81.photobucket.com/user/whiterocket/media/volk-racing-ZE40-bronze_jpeg_zpsefbomn4u.jpg.html)

[tegra7]

Round 3
https://vancouver.craigslist.ca/van/cto/5757285528.html

[tofu1413]

Round 3
https://vancouver.craigslist.ca/van/cto/5757285528.html




So......... is this a bidding war now, like vancouver real estate?


shadow flip ITRs? :lawl:

[TouringTeg]

Still hasn't cracked into 7k Selling a car with a firm price is tough. Everyone wants to feel like they negotiated a good deal.

Bridgestone $70 Costco rebate is on again as of Aug 29th. Got some Re71R 205/45/16 put on some OEM Prelude wheels. Can't wait to try them out.

[twitchyzero]

phat_R
amazing to see she didn't get the death sentence and is back to the former glory
how did you convince the adjudicators to retain clean status with sucha heavy restore bill? That would've meant they considered the R to be worth $40k+ at time of accident? Was it appraised beforehand and they factored in the turbo (iirc)?

[TouringTeg]

^ I'm curious as well. I think ICBC values the Type R the same as other Integras. My insurance is $931 for the year with 43% discount.

[loong]

Yea, I'm really curious as well. That is my worst fear that in an event of a bad accident, my car would be written off and not repaired due it just being a regular Integra in their eyes.

[VR6GTI]

Yea, I'm really curious as well. That is worst fear that in an event of a bad accident, my car would be written off and not repaired due it just being a regular Integra in their eyes.
If its that big of a concern you should have the vehicle appraised by an independent company. They are insuring you for a vehicle they believe to be worth xxxx amount of dollars. They have no idea that you have $10,000+ in mods and that your vehicle is a rare breed. Alot of people do not want to get the vehicle appraised and let there insurance company know. They do this to save money but when something does happen if you have the proper documents in place you will have a hassle free claim.

[twitchyzero]

GS-R and Type-R doesn't have its own insurance tier with icbc?
I know they classify RSX as either as type-S or non type-S

[thumper]

i think there should be a difference. i don't think they would single out the integra as all being the same? for example just out of curiosity i asked my autoplan agent when i renewed my insurance for my mustang what the difference would be if i went from my GT to a GT350 and the difference in price made me :cry:

[white rocket]

With a stock ITR worth so much nowadays how can ICBC just hand over a cheque for like $12K if one gets written off? There is data to support the high prices and if ICBC isn't up on that then they are shit outta luck. Aren't you suppose to get what the car is worth in the open market at the time of a write-off? The idea is for an insurance company to give you enough money to replace the car that was totalled. If stock ITR's are worth over $20K well then that's what you would expect to get. Mods or not. Since ICBC only covers up to $5K in aftermarket mods and anything over that needs a separate policy you should STILL walk away with a big cheque due to the current market value. I'm surprise that they consider it the same as every other Integra.

ICBC tried offering my $16K for mine a couple years ago, I said fuck off, they approved the claim which was north of $10K for them and ended up being more like $14K after fuck ups. I'm slightly different in the sense that I'm under a Garage Policy which makes every vehicle "declared value". That means that as long as you have receipts showing that your $10K car is worth $50K then there's no problem.

Still though, Phat_R didn't wave a magic wand to get it done, he just talked to the right adjuster, explained him self and woolah!, a repair order was issued. Lucky for him the cage took the brunt of the impact which may saved the frame rails and shock towers from being tweaked.

[TouringTeg]

http://img.photobucket.com/albums/v469/Touring240/Mobile%20Uploads/20160904_192307-1_zpskl9rlywq.jpg (http://smg.photobucket.com/user/Touring240/media/Mobile%20Uploads/20160904_192307-1_zpskl9rlywq.jpg.html)

Identity crisis. Testing out fresh RE71R on Prelude wheels.

[westopher]

Looks great, but the blades should be going the same direction.

[TouringTeg]

Good catch! I will swap them around

Edit: As the tires are directional I have to take them back to Costco to get them to swap the rear tires left to right. Lame.

[Iron Chef]

Type SH rims look better.

The RE-71's are amazing but they don't seem to wear that well.

[TouringTeg]

I agree I picked up the wheels for $80 a while back so I can't complain.

Very sticky tire! It was a bit of shock hearing the rocks being picked up and the noise as they stick to tar strips. Also I have to relearn what revs to launch at.

[tegra7]

I agree I picked up the wheels for $80 a while back so I can't complain.

Very sticky tire! It was a bit of shock hearing the rocks being picked up and the noise as they stick to tar strips. Also I have to relearn what revs to launch at.

Had the same tires on my rota slips, the grip is amazing but I threw my stocks back on due to rocks being tossed up.

[Port Man]

4 White Kosei K1 Racing 15x7 ET38 4x114.3 4x4.5 (http://vancouver.craigslist.ca/bnc/wto/5767880634.html)

track rims for jdm itr?

[TouringTeg]

1995 JDM Integra Type-R (http://vancouver.craigslist.ca/van/cto/5734795472.html)

$6500 not bad

[tofu1413]

1995 JDM Integra Type-R (http://vancouver.craigslist.ca/van/cto/5734795472.html)

$6500 not bad




wonder if itll fall under $6k like my last one.......


but seeing the condition of the car based on the pictures, it'll take at least $3-$4k to be track worthy/ satisfying spec..... and thats before cosmetics. :lawl:

having a/c on the J spec is a nice touch though.

[white rocket]

A decent '01 with the reds in ON: 2001 Acura Integra Type R Hatchback OEM Red Interior #01-1212 | used cars & trucks | Markham / York Region | Kijiji (http://www.kijiji.ca/v-cars-trucks/markham-york-region/2001-acura-integra-type-r-hatchback-oem-red-interior-01-1212/1196543894)

Would make a killer daily :considered:

[!e.lo_]

I agree I picked up the wheels for $80 a while back so I can't complain.

Very sticky tire! It was a bit of shock hearing the rocks being picked up and the noise as they stick to tar strips. Also I have to relearn what revs to launch at.

Had the same tires on my rota slips, the grip is amazing but I threw my stocks back on due to rocks being tossed up.

pussies

[tegra7]

Lets keep this thread alive! Any track days coming up? Weather is supposed to be good next week. Possibly a summer end meet?

[Iron Chef]

I feel too old to do meets. If I were it would be for s type r only meet, and it should be on #typertuesdy which coincidently is sunny this Tuesday, just sayin.

When's everyone putting there cars away for winter? Usually the end of sept is when mine goes to hibernate.

[Akord]

Last day is this Thurs. Cruise tomorrow man. Feels like IC.com again

[!Kodamu]

There is a track day on Friday Sept 16th you guys can stretch your R

[tegra7]

There is a track day on Friday Sept 16th you guys can stretch your R

More info pls. The R is coming off the road next Sunday.

[white rocket]

Washed both of them on Saturday. Hadn't started one in about a year. After a quick jump it fired right up. Felt good to get them cleaned up. Right in time for Fall :P

[!Kodamu]

More info pls. The R is coming off the road next Sunday.

Here is the motorsportreg link

https://www.motorsportreg.com/events/speedfanatics-lapping-day-16-sep-2016-mission-raceway-speed-fanatics-motorsports-818507#.V9b_TRmp7qA


You can also send a msg on Facebook through the Speed Fanatics fb page

[!e.lo_]

Message me for details.

For Sale:
Cusco 6pt Bolt in cage with Optional Carbon Bar (hardware and backing plates included)
Spoon CF Hood
JDM Front bumper, Phoenix Yellow with Voltex Medium Canards

Prefer to sell as pair:
Seibon CF Hatch with FAL Glass
Voltex Type 2 with 275 stands

[TypeRRR]

Jdm 96 Spec Honda Integra type R (http://vancouver.craigslist.ca/van/cto/5763744328.html)

I went to look at this one, It seems clean but the guy could only take me for a test drive around the block, 30mph under 3krpm and said he has never hit VTEC in the car ever . I said I would be ok to go through with the purchase after a pre-purchase inspection and he has ignored my texts.

Is asking for a pre purchase inspection not appropriate? (obviously I would pay for the inspection).

Edit: Does anyone know of any other local JDM Integras for sale locally?

[thumper]

Jdm 96 Spec Honda Integra type R (http://vancouver.craigslist.ca/van/cto/5763744328.html)

I went to look at this one, It seems clean but the guy could only take me for a test drive around the block, 30mph under 3krpm and said he has never hit VTEC in the car ever . I said I would be ok to go through with the purchase after a pre-purchase inspection and he has ignored my texts.

Is asking for a pre purchase inspection not appropriate? (obviously I would pay for the inspection).

Edit: Does anyone know of any other local JDM Integras for sale locally?

i suspect the seller dropped off the face of the earth because the inspection will show what he may not be telling you. if he continues to not answer back, walk away and consider yourself lucky.

[TouringTeg]

Walk away

If it's a great deal I inspect myself to facilitate a quick transaction.

There is autox at Western Speedy Victoria Sept 18th and Oct 2nd. Blades are the right direction now so I will be even faster :D

[TypeRRR]

Thank you for the advice, appreciated.

Its a shame that someone could potentially get screwed buying it.

[ravenhill]

Jdm 96 Spec Honda Integra type R (http://vancouver.craigslist.ca/van/cto/5763744328.html)

I went to look at this one, It seems clean but the guy could only take me for a test drive around the block, 30mph under 3krpm and said he has never hit VTEC in the car ever . I said I would be ok to go through with the purchase after a pre-purchase inspection and he has ignored my texts.

Is asking for a pre purchase inspection not appropriate? (obviously I would pay for the inspection).

Edit: Does anyone know of any other local JDM Integras for sale locally?

Always, always do a pre-purchase inspection. And I guess it's a bit of a waste with RHD cars if they were imported recently, but if it's a Canadian car (or just been in Canada for a while), get a Carproof report.

When I bought my ITR, I test drove it and got a pre-purchase done which included a compression test (and maybe a leakdown, can't remember).

[thumper]

Always, always do a pre-purchase inspection. And I guess it's a bit of a waste with RHD cars if they were imported recently, but if it's a Canadian car (or just been in Canada for a while), get a Carproof report.

When I bought my ITR, I test drove it and got a pre-purchase done which included a compression test (and maybe a leakdown, can't remember).

not a waste. just because a jdm passed gov't inspection dosen't mean the car is any good.

[SumAznGuy]

Walk away

If it's a great deal I inspect myself to facilitate a quick transaction.

There is autox at Western Speedy Victoria Sept 18th and Oct 2nd. Blades are the right direction now so I will be even faster :D

Let me know if you think the car needs a bigger rear sway bar.

I have the ASR 32 mm rear bar with 2 different center sections from my ITR. :fuckyea:

[ravenhill]

not a waste. just because a jdm passed gov't inspection dosen't mean the car is any good.

Oh, I totally agree. I meant getting a Carproof would be a waste if the car had literally just been shipped from Japan. Happy to be proven wrong but I don't think Carproof covers accidents in Japan!

[loong]

Edit: Just saw it was posted earlier in the CL goodbuys thread.

https://vancouver.craigslist.ca/van/cto/5780335190.html

This monte carlo blue ITR is back up for sale. In its glory days, it had all authentic Mugen parts.

https://scontent-sea1-1.xx.fbcdn.net/v/t1.0-9/1910201_122572129642_3840194_n.jpg?oh=2c1366a255ee 97e20d58290d94a469b9&oe=583973B0

https://scontent-sea1-1.xx.fbcdn.net/v/t1.0-9/1910201_122572004642_7177908_n.jpg?oh=8069f1cffdbe 171eaed7cc8ed4368ed0&oe=587653D4

[jasonturbo]

Mugone.

https://i.imgflip.com/1ak7if.jpg (https://imgflip.com/i/1ak7if)

[tofu1413]

Edit: Just saw it was posted earlier in the CL goodbuys thread.

https://vancouver.craigslist.ca/van/cto/5780335190.html

This monte carlo blue ITR is back up for sale. In its glory days, it had all authentic Mugen parts.

https://scontent-sea1-1.xx.fbcdn.net/v/t1.0-9/1910201_122572129642_3840194_n.jpg?oh=2c1366a255ee 97e20d58290d94a469b9&oe=583973B0

https://scontent-sea1-1.xx.fbcdn.net/v/t1.0-9/1910201_122572004642_7177908_n.jpg?oh=8069f1cffdbe 171eaed7cc8ed4368ed0&oe=587653D4


I remember an RS member owned it at one point and did the "put it back to stock" thing to it..

could use some love, this car, and get the quarters fixed. But i do think the car deserves to be repainted back to Champ white.

[tegra7]

^God i hate that ITR

[Jaffray]

^ whaaaaa? I dig it, especially the blue! Slap some TE's and some little bits here and there.. :thumbs:

[tegra7]

I remember when it was for sale back in 07/08 with all the Mugen goodies, It seemed like a special car at the time. Now it reminds me of that chick every guy wanted to bang back in high school that turned out to be a cracked out prostitute.

[Limitless]

Is there more than 1 of those blue itrs locally here? If it's the same one as the one I'm thinking of, definitely stay away from it..

[white rocket]

I remember seeing that blue ITR at the meets back in 2004/2005. Been raped and shitkicked since then though apparently.

[320icar]

Is there more than 1 of those blue itrs locally here? If it's the same one as the one I'm thinking of, definitely stay away from it..

There's also a blue GSR with the same colour / jdm front that just pours blue smoke out the back. Mgbt also be thinking of that one

[TypeRRR]

I know that there are ITR's on Craigslist now, but is that the best place to look for them?

How many JDM Type R's have you guys pop up for sale in the past year?

Im looking at the import prices and its like ok $10,000 for a JDM DC2 then another 4-5k Import fees and taxes.

If I can get one locally it obviously makes sense, I just don't know if craigslist is the best place to look.

[tofu1413]

I know that there are ITR's on Craigslist now, but is that the best place to look for them?

How many JDM Type R's have you guys pop up for sale in the past year?

Im looking at the import prices and its like ok $10,000 for a JDM DC2 then another 4-5k Import fees and taxes.

If I can get one locally it obviously makes sense, I just don't know if craigslist is the best place to look.

JDM RHD Could be had for much less than that......

I do have someone that imports RHD for me that can help. Feel free to PM me

[twitchyzero]

unless you're really specific (very low km, near bone stock, must-have model year)....no need to import as JDM ITR have been popping up locally around $8K

[TypeRRR]

JDM RHD Could be had for much less than that......

I do have someone that imports RHD for me that can help. Feel free to PM me

Thanks man Ill get in touch with you.


unless you're really specific (very low km, near bone stock, must-have model year)....no need to import as JDM ITR have been popping up locally around $8K

Cool thank you for that its good to know that all hope isn't lost, I would appreciate it if you could PM me if you spot one up for sale!

I just want one with nice recaros, no mechanical issues and no smashes... mileage doesn't matter too much as long as it has been looked after.

I am curious if there is a website like Pistonheads in Canada, we use this back home its pretty good http://www.pistonheads.com/classifieds?Category=used-cars&M=366&Option=1

Craigslist scares me

[thumper]

There's also a blue GSR with the same colour / jdm front that just pours blue smoke out the back. Mgbt also be thinking of that one

i wonder if it is the one i sometimes see pushed out front of an unmarked warehouse unit near aj racing. the few times i've seen that car it always has expired tags. i've seen it in the company skyline gt-r's and fd rx7's and they all come and go, but it's still there in the end...

[TouringTeg]

The best places online to find an R seem to be CL Vancouver or kijiji for the rest of Canada. If you are open to US cars check out ITRexpo. Most US cars get posted on CL.

[tegra7]

RARE 98 acura integra type R 16000km (http://bellingham.craigslist.org/cto/5786004500.html)

Pics are of a 97 ITR with USDM steering wheel.

[VR6GTI]

RARE 98 acura integra type R 16000km (http://bellingham.craigslist.org/cto/5786004500.html)

Pics are of a 97 ITR with USDM steering wheel.

Anyone email them and let them know yet?FailFish

[tofu1413]

Anyone email them and let them know yet?FailFish



texted him :troll:

[twitchyzero]

sent the ad to OP :troll:

[tegra7]

sent the ad to OP :troll:

Maybe he can get it for 10k with his negotiating tactics. :lawl:

[tegra7]

Toronto 2001 CDM ITR 208 kms 16k OG owner.

Integra type r 2001 | used cars & trucks | Mississauga / Peel Region | Kijiji (http://www.kijiji.ca/v-cars-trucks/mississauga-peel-region/integra-type-r-2001/1204496951?enableSearchNavigationFlag=true)

[JDMACCORD]

Pics for that one is up on Itr expo car looks decent he even dropped price to 15 k cad