|
another fun night on the town.. i wil have some pics of my car soon!! be prepared! :) |
I like the look of those plugs alot better...going lean really sucks. Sure a super rich mixture is going to foul your plugs a bit, and make your eyes water at 10 feet, but you never hear people saying " Yeah I riched out my motor at the top of third gear and BANG" Full power is achieved at a ratio of 13:1, optimum gas mileage and emissions output occur at a mixture of 14.7:1. So a little rich never hurt anyone, I'd be scared if my plugs looked like this http://www.rx7club.com/forum/attachm...postid=1294021 Happy Tuning |
yeah my leading plugs look a little rich and my trailing plugs look a little lean, but, whatcha gonna do eh. Overall I'd say both leading and trailing are in the healthy range on both rotors. Will have to watch them again after actually installing DLIDFIS. :) |
chould try runing hotter plug and run rich at teh same tiem it will = out in the end |
A hotter plug combined with 'spirited' driving would not be the best idea...because rotary's plugs are constantly firing (no rest/cooling cycle like a piston) a hotter plug leads to excessive heat retention in the porcelain and can cause cracking. The only people that run hotter plugs are those that do alot of sitting in city traffic, or live in really cold climates. I beleive BR8 is the standard city plug and 9 for the highway....I run 9's and only fouled them once. Idling in traffic for 45-60 minutes in Vic on Canada day. Cleared 'em back up in a few minutes of regualr driving. |
well i am aware of that but not runing to hot is bad one yes but fi you run to cold of plus you will flude easy |
how often do you change you plug? like every 10,000kms? |
whenever they look like crap :p I do my oil every 3,000kms, check plugs at every oilchange, this set is ok now, will probably be getting tired at the next change. So I'd say yeah every 6~10k... Too bad these plugs are farking expensive. |
Quote:
|
I might just say fuck it and wait till I start another project next winter.:D |
I've got the parts, just have to find the motivation to tear apart my existing ignition wiring harness :p |
Timpo I found you 2 oil metering pumps. From various places, 1 in kansas and the other St Louis.. I asked how much $$ and they are going to get back to me |
Re: Timpo Quote:
Where are Kansas and St.Louis? is that in Victoria? Where is that? Is it far away from here? Are those pump made for FD? Cuz I found that FC ones are hard to use on FDs... |
Hey, Those locations are in the states. Easy enough to ship here. One guy said make him an offer the other guy said that 75 bucks and shipping (american) would be good enough. |
Quote:
I really appreciate your help though... thanks. |
who the hell has that ferrari!?? still looking good.. keep your dam car and upgrade it!!!!!!! |
I wish I could keep my car but I'm going to save money from now on... I'll buy something like Mazda Miata or Suzuki Swift... Most likely Suzuki Swift/Geo Metro/Pontiac Firefly |
|
Does this look like a good deal? http://buysell.com/results.asp?id=2...Display+Results I thought I'd ask the RX7 guys :) thanks BRETT |
Quote:
try that link again |
|
Quote:
why? are you looking for an RX-7? to drift? http://buysell.com/webphoto/1874/1874900227.jpg 1988 MAZDA RX7 10th Anniversary, turbo 5 spd, loaded, incl pwr sunrf, lthr seats, alloys, white/black, only 110,000 kms, local, clean car. $8888. Chan's Auto Ltd (Dl#10864) 7469 Edmonds St., Burnaby, B.C. Tel: 604-777-1328 |
CobraGT I have no idea if thats good deal or not...but in my opinion, it should be a little bid lower than $8888...I have no idea about the anniversary RX-7 turbo price range... |
haha, I can drift in my car now :) It's definately got the power to do it... What I really want is an RX7 like yours Timpo, but I can't afford it... so I thought I'd go 2nd gen Plus, it's almost idential to Ryousuke Takahashi's FC3S :D!!! he's my favorite! |
| All times are GMT -8. The time now is 04:21 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net