i halped, took alot of JB weld but we got er done



any ideas how we get it back in the housing now? i think we missed a step or something?

i read we just have to clearance the housing abit then glue it back up. should be easy.

Modded another bike into the stable.

05 .243 Racing FR Hardtail
Marzocchi Shiver SC w/lockout
Intense Mag30 26" Magnesium wheel set
Truvative Holzfeller Crankset
E13 Chainguide
Maxxis Holy Roller's
Answer bars/ Raceface stem.
etc etc etc. . .

http://p1.pinkbike.com/photo/2212/pbpic2212624.jpg

hate to burst your bubble, you're supposed to weld the spiders, not the ring and pinion to make a posi. Now your diff won't turn at all.

haha. that picture was posted on another forum. im not quite that stoopd

LOL nice, was hoping you weren't that dumb :grin-FU:

^ shawn's been in a hick town too long, he cant tell good satire when he reads it. lawl

on a related note, installed my Aussie Locker auto locker yesterday at honja on the day off
also did all the bearings and seals in the rear, t-case seal, oil change, greased all the u-joints, changed the serp belt, dropped the tires to 15psi and went to postil to try it all out...

OMG is all i have to say about it


craig, new rig looks good. got quite the bike collection now hey

Sounds like the heep is going to be quite the machine man! With that locker and the tires I bet it goes ANYWHURZ.

I ended up selling the bmx, just was'nt my style. The 20" wheel size was throwing me off badly after riding mtb's for so many years. The .243 is one of the closest things to a BMX i'll get with 26" wheels.

A+ on the jeep jeffy

3.91 LSD rear end
27mm 325 axles
rear half of the driveshaft for the rear end swap.

Modded a TJ Jeep into the side of my parents van I was driving today. Fucker...

Scavanged some factory tow hooks and mounting brackets from a 98 Grand Cherokee at PYP today. install tomorrow. things are alot beefier than I expected.


now I can fix Jeffh's woops when we go Heeping.

jeeps are all over this thread!

my tranny is slipping in snow and 4 hi, does that count as a mod?

do a fluid flush. made a world of difference in mine

this is what danny tells me too. i got 2 axle shafts today from pnp, my RR wheel wobbles like nuts on the highway, bearings are new so i think it should be the flange on the shaft is bent a little? and now ill have spares!

you went to PYP without me? no fair.


on a side note: hooks are on. lets go get you stuck somewhere

Demodded my Integra keys off my keychain and gave them to someone else....... :'(

i thought it was sold last month?

It was. but we had an arrangement for me to hold it for a bit to put interior back together and retune it a bit once it got warmer out.

more like DEtune it by about a hundy hp

;)

adjustable track bar finally, extended stainless russel brake lines (thanks ash) tranny flush front seal on t-case which decided to start puking 2 days after we did the rear one

who says you cant polish a turd?

Put on rims, tires, and intake.

pics ^

Between 2 of us, we've spent bout' 5hrs polishing a set of VERY dirty wheels. Starting the mods on the new ghetto g-ride. So far its been handfulls of weight removal of useless crap on the car. (useless interior, intake, cutting the coils etc)