^ yeah that was us. comming home from bartley

I don't think you're going to even notice the extra 2 inches of sidewall being that they are allready 37's. I'd be more concerned if you were dealing with 33's. That being said.. go for the 20's, everyone wants to be "rollin' on dubs".


Oh yeah, modded one less side rail link out of my chains yesterday, aparantly pickups can rip apart 5/16 semi truck chains when chewing through a few feet of snow.

modded dannys 5/16s semi truck chains back into usefullness yesterday after he blew a link. using an axe, vice grips and a hammer. otherwise we migth still be up there

^ dont forget the cordless impact, and the key roll it played in the day...


:haha:

"hey guys im seriously aggravated right now!"

new rims and tires on the truck today... pics to come later when im not so lazy

went to put my new grill in and straiten my bumper today. apparently to work on jeeps you need SAE metric and voodoo tools.

FUCK

Hey guys, been awhile, things have been crazy hectic, We welcomed baby #2 into the fam, holidays, work, ya know how it goes..

So progress of my rolla, alot of goodies finally got installed

4agz(t)e swap
Vibrant sponsorship came through, Intercooler, piping, couplers and boost vacuum box, Oil catch can - check
STRI gauges and Innovate Wideband - check
Greddy Profec - Check
Greddy Coilovers - check
Greddy Electronic damper - check
HKS BOV - check
Koyo Rad - check
Flex-a-lite fan - check
Powerslot/Hawk brakes/Good ridgelines - check
Microtech w/x4 box - check
MSD individual coils / wires - check
FC oil cooler -check
Russel Fuel/coolant/pressure lines - check
BOSCH 044 fuel pump with sump pan - check
FC 550 injectors
T3 NCRA, short shifter, Tension control arms - check
Ksport Pan hard - check
Whiteline sways - check
Centerforce clutch - check ( will be replaced with act)
Turbo manifold/Turbo - check
Vertex style body kit molded- check
Origin lab wide front fenders and rear fender lip - check
XXR 16x8's w/tires - check
Sparco wheel with NRG quick release - check
VIS CF hood - check
Fidanza Adjustable Cam gears - check
AEM FPR - check

PPG Paint sponsorship - Just waiting on 2009 approval then paint the car
High comp redtop swap - at machine shop
ARP studs, TRD springs, Cometic headgasket, T3 adapter -waiting to be installed
H4 conversion w/ HID -waiting to be installed
Redline coupe tails - waiting to be installed
Flush mount locking hood pins - waiting to be installed
Front mount intercooler spray setup w/ bottle - waiting to be installed
AEM water /meth kit - Have, dunno about install yet
BNIB Toyota turn/marker signals - waiting to be installed
CF headlight covers - waiting to be installed
Dyno and enjoy by spring
and my head hurts now, so im sure there is more

Most of the pictures/build can be found @ http://www.enhancedautoworks.com/projectstreet

Thanks alot, Ive been working very hard, lots of time, money and thankfully sponsors for a 22years ol car, that I hope will be magazine worthy and maybe win a few shows :)

I started with
http://enhancedautoworks.com/ProjectStreet/1.jpg

http://enhancedautoworks.com/ProjectStreet/2.jpg
http://enhancedautoworks.com/ProjectStreet/3.jpg
http://enhancedautoworks.com/ProjectStreet/3a.jpg
http://enhancedautoworks.com/ProjectStreet/4.jpg
http://enhancedautoworks.com/ProjectStreet/5.jpg
http://enhancedautoworks.com/ProjectStreet/6.jpg

your f'n pal
AL!

http://i66.photobucket.com/albums/h2...lleC82/new.jpg

as promised, new picture.. shity cell cam quality but u get the idea..

needs bigger tires.. but i got a crazy deal on these so they will do for now

Thats fucking awesome!
Props man, beauty.

cd player in the heep today.

1 upped jeffh with a better cd player in the heep today. :p

window visor thingys......

Picked up a set of 33's and I sure hope I can make them fit. Tossing and turning which rims I want to replace the tires on. I dont really need 2 sets of mudders but It always nice to have a spare set... but than the quiet radial all terrains are also nice to have around and having 3 sets on rims is just pointless.

Car looks cool Al, alot of work went into that thing. Very nice.

does a highlift count as a mod?

how bout a new hitch receiver?

hell ya highlift.... jeff, u should look into one of those roof mount storage bin things for the jeep... has a high lift holder, gas can holder.. big open cage in the middle.. .axle holder maybe? pure redneck.. but they look / work pretty good for those jeeps

ive seen em online any ideas on where from?

all this crap sure adds up real quik
still dont have any spares or recovery straps and im half full

what happens when i put camping gear in?

well thats where these roof mounted units come in handy...

i can get them through one of my suppliers... i'll try to remember to hit u up with the cost on tuesday when im back at work

I'm trying to find a used roof basket to mount a few more lights on, and a spot for my highlift to clean up the interior. Just picked up a clamp-hitch to quickly hook up straps. Looks like I need to change the u-joints tomarrow. I've gained this horrible driveline vibration.

if you dont have a parts hookup in town go see greg, he works at action on mccurdy now

Took a Stihl cutting saw and chopped up the truck tonite. Nice to have found a surprise 3/4 tank of fuel.

Sent the 240 to the bodyshop on wednesday, should be in its new skin next week.

boost / pyro installed...

adam theres a roof basket and light bar on bcjeepclub.ca right now

guy is out of surrey. and its for an XJ tho dunno how that works with your rig