front wheel bearings, and brake lines

The problem: Starting to get low on fuel.

The fix: Less than $20 of gas @ 72.9/L

The result: not having to stop for gas for another week or so.

but seriously...today I think I'm gonna re-install my rear speakers that bailed on me while 4x4'ing...

hauled a parts truck into the driveway

The neighbours must be overwhelmed with joy.

I guess thats the good thing about acreage.

lol....touchez

new cat-back exhaust. just OE replacement. old one had more holes than OJ's alibi

^ whered you get her dialed in?

i change the tranny fluid in my heep today. and bought a dope trapper hat for red-necking

parts from wyatt. started in my garage until i couldnt separate the muff from the cat and got frustrated and then took it to meineke at 4:40 to get them to finish up before closing. haha. turned out to be a good idea tho as there were fitment issues and they had to bend some shit and weld in a new hanger anyway.


im doing my tranny fluid and filter tomorrow too. and adding some lucas to hopefully hold the tranny together untill spring.



while i was crawling around under the Heep I noticed Ive got a leaking axle seal on the FR and my tie rod ends could use a doing as well. add that to my motor mount that still needs doing. it never ends

^ domestics hey

apparently the 4.0 tranny is supposed to be bullet proof, i just did the fluid cuz its free and i had some time after work.

i put a pcv sort of thing in last week which significantly dropped my oil burn factor not bad for 6$

HID's in the X-trail to better see the swamp donkeys with. Trying to find time to put in indash DVD player and screen plus all my stereo shit.

Some sweet winter/off road floor matts.

You should post about your sweet 45degree steering wheel mod! :D

modded a CRF 450 pipe onto the back of the quad over the weeked...

WAY more throttle response.. not to mention shes effin loud..

so much for a hunting quad

http://i179.photobucket.com/albums/w...96128_4381.jpg

modded air out of my wheel, and to drive strait i have to clock the wheel 45 degrees to the right. the whole axle has been shifted about 1 inch to the right.
good times

Took the 30' mudders off and threw on a set of 31bfg's. Cranked the torsions, removed the front bumper skirt, added a secondary tow hook on the front, added a K&N filter and dissasembled the MAF with an exact-o blade and changed the gog-set to richen the mixture slightly. Continued dissasembly of the parts truck.

30' mudders you say... for sale?

put my b18c1 bottom end together complete with an LS crank, LS Eagle rods, GSR Mahle forged pistons(10.5:1), and the oil squirters :D

Didn't you hear? A/T stands for mudders.


Bolted on my clutch and tranny today.... motor will be resting in the car TONIGHT

Coolant flush and Tranny flush and filter.

spot lights installed on the front bumper! pimptastic

Put some blue tirefly's on the work truck..... If you see em spinning gimme a honk haha.

Berz out.

got bentover for a new fuel pump yesterday.

ordered my headers, x-pipe, and muffs.

almost ready to fire up:D

Got a roll N lock for the superduty, just a leveling kit and some tires hopefully that's all i'll be doing...