REVscene Automotive Forum

REVscene Automotive Forum (https://www.revscene.net/forums/)
-   Okanagan Automotive Chat (https://www.revscene.net/forums/okanagan-automotive-chat_153/)
-   -   Mod of the day thread (https://www.revscene.net/forums/197911-mod-day-thread.html)

girlcrazy_420 08-18-2005 07:12 AM

Quote:

Originally posted by fourtirefire
who let you register on here again? or did you sneak between the cracks... I thought banned meant banned
What the fuck is it to you? I was banned for two months, I havnt posted anything for three... I dont even get a fucking "welcome back" but instead a "why the fuck are you on the board again" Fuck you too Danny.

oh, to answer your question. hypa and your local mods

down_hill_dog 08-18-2005 08:30 AM

i don't mind having him back... Just please don't post retarded garbage like you did before.

Adam's a good guy and means well lets maybe just help guide him in the right direction instead of bashing him. Welcome back, and good luck with the Impulse. I'm happy to see it going to someone who is willing to spend the time with it.

Tchleung 08-18-2005 04:45 PM

Many boosted guys run lighter flywheels. Jut not stupid light.

fourtirefire 08-18-2005 05:15 PM

Quote:

Originally posted by Impulse_rs
What the fuck is it to you? I was banned for two months, I havnt posted anything for three... I dont even get a fucking "welcome back" but instead a "why the fuck are you on the board again" Fuck you too Danny.

oh, to answer your question. hypa and your local mods

i don't have a problem with you.. i was just under the impression from the mods that you were banned for a long long time....

Tchleung 08-18-2005 05:55 PM

Mod of the day:

Installed new plugs, cap, and rotor for the teg.

fourtirefire 08-18-2005 06:40 PM

oh today's mod.. new EVO compressor wheel for my turbo.. that'll go on before the labour day weekend drags.... hopefully along with a fuel pump/regulator/lines/highflow filter... and lots of TUNING!

Tchleung 08-18-2005 06:42 PM

where are you sending it out to be balanced? I thoguht only place near us is down in the states. Cause that's a must.

fourtirefire 08-18-2005 06:43 PM

probably a diesel shop in salmon arm, as i'll be at RMT's shop to do the install

SaviorSelf_666 08-18-2005 06:48 PM

where is a good professinal palce where i can get my coilovers installed?

AzN_ignite 08-18-2005 07:18 PM

at the Nissan dealership, Enhanced auto in kamloops, or install them yourself. suspension is basic stuff any shop can do it

blue92eg 08-18-2005 08:44 PM

well on sat the 13th i blew out my tranny....i was heading into westbank and down shifted from 4th to 3rd and it kinda got stuck in between 3rd and N...then after i put it into N it started making all this ticking noise so i was like WTF...turned around and headed for peachland(home)...got home and found tranny fluid on the drive way so more WTF...well all in all today 18th i changed out the tranny and put a new used one works perfect in only 3:20mins not bad for a first attempt at it so im back on the road thanks to average al for the tranny he sold to me

Tchleung 08-18-2005 09:17 PM

blue92eg - check PM

SaviorSelf_666 08-18-2005 11:21 PM

Quote:

Originally posted by AzN_ignite
at the Nissan dealership, Enhanced auto in kamloops, or install them yourself. suspension is basic stuff any shop can do it
What do i need to do it mysef?
Install time? also if you see in the pics of the coilovers i have, there is no top mount things :( I dont know what they are called, do i need em?

blue92eg 08-20-2005 10:32 AM

G2Teggin pm replied

jeffh 08-20-2005 12:13 PM

new sparco harness today new ngk blue plug wires last night
and tommy adjusted my chip some more.

Tchleung 08-20-2005 12:44 PM

Quote:

Originally posted by RMS13
What do i need to do it mysef?
Install time? also if you see in the pics of the coilovers i have, there is no top mount things :( I dont know what they are called, do i need em?


Reuse your old top hats

Tchleung 08-20-2005 04:10 PM

Reburned new program for jeffh's ecu again.

fourtirefire 08-20-2005 09:21 PM

minus modded my 17inch blingers
added 2g talon 16inch swirlies

girlcrazy_420 08-20-2005 11:22 PM

Took off the 14's and put on a set of 15's with a higher profile tire.

darnold 08-21-2005 05:49 AM

Picked up some rota group N's for the teg, hopefully il have some tires to go with them soon.... any recommendations?

jeffh 08-21-2005 10:34 AM

hankook RS-2's are the sitckiest street tire i have seen, but they wear out quickly
maybe some dunlop fm901's? there not as sticky but they will last longer
same with the yokohama es100

proshoraca 08-21-2005 12:51 PM

horsepower and gears into car yesterday.

down_hill_dog 08-21-2005 03:25 PM

Derek, i'd honestly go with a set of falken ze512's or somthing. if your not crazy into hard driving anything better than allseasons will be fine. On the street i'm on a set of Goodyear Eagle ST's and theyre perfect. Treadwear is great and traction is just enough.

jeffh 08-21-2005 11:51 PM

pulled my motor today, some other mods but ill elaborate later.

ColinK 08-21-2005 11:53 PM

cleared my corners yesterday and put in some piaa bulbs. Then I got hit by some girl who "apparently" didn't see me when I was right in front of her :(


All times are GMT -8. The time now is 03:26 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net