Ah figured it out, I may not post attachments says the forum rules:swear:

gorgeous rims, Craig. cdnsc2: that probably the lowest Saturn I've ever seen :lol

as for me...my insanely ground cam (as much as th ECU will handle...apparently idling will be a problem ;)) went in earlier today....pistons, rings, rods, crank, all bearings are in....should be one fun ride ;)

Mod of the day...Celica seats in the CamperVan :D.

:lol I can't wait to see that van :D

I believe Enkei made saturns rims for them. oops. :shhh:

I might look at buying my moms 02 Copper SC2 in the spring... Just gotta swap out the auto for a 5speed from an SC1. Shes lookin at getting a Sky when they come out.

dude...the Sky/Solstice cars look sooo pimp :D

Decided to take the time to work on my beater car a bit.. Repalced the radiator with my spare one, also repalced broken driver side mirror.

did a bunch of tuning in the pits today.. re-routed the boost controller signal line to the intake manifold pressure instead of the turbo outlet elbow, it was causing some nasty boost spikes and fluctuations.

was over-running my MAS and causing a sputtering at WOT so disconnected some breather lines on the inlet tube so I can get more air in that is un-metered, makes up for the black smoke pig rich issues too

ordered up my ACT clutch today from Enhanced with the heavy duty pressure plate and performance street disc, it's rated to 322 ft/lbs of torque, so it should do the job

i'll throw it in friday night...

If you don't ride it on launches ;)

Mod of the day:

Paitned and put new gas door on car for mockup before final paint

240sx
 

Replaced my front tension control rod arms and bushings on my 240. The old ones were shredded and leaking a tiny bit of fluid. Steering feels more accurate now. I can buy a complete energy bushing kit from lordo for $200. Any feedback on their product?

TJ

^ ive got it for my teg. be prepaired to have a shit load of headaches if you install them yourself. im still battling with mine but the do make a difference in each little area. and after you go to eurethane you will never have to do them again

my motor is in!!!!!!!!!! :D just have to put on the starter, rad, fan, etc....hopefully she'll be running Thursday/Friday (my buddy has stuff to do tonight :( )

Re: 240sx
 

nice, i never got around to doing that on my old 240... did you just replace them with oem rods or did u go with an aftermarket ball joint alum rod setup?

I went factory replacement for now, the pillow ball review I read said that it was quite a rigid setup. As I'm not doing autox this year i figured I wouldn't need them. Factory was the closest and quickest. *** Racing out of vancouver sells some whiteline bushings for the tc's out of australia. They are supposed to be good but they were a month away...and my front end was too sloppy as is. The season is over for me this year, next year I hope to beef up the suspension a bit. not sure if hicas should be disabled...I like going thru 90 degree corners at 90k without my tires screeching.

well, its Part I
http://enhancedautoworks.com/project/zx2/img/turbo.jpg

SICK

That should be a quick little escort..

Mod of the day: wednesday Iordered new drivers and passenger door panels for the Van, as well as new window cranks and cat's eyes, they came in today and are in place :D. Not bad for free shipping

tore my tranny and old clutch out of my car..
turns out the piece of shit pressure plate was only applying force on 2/3 of the flywheel surface, and upon further inspection.. the pressure plate is collapsed quite nicely, without any signs of overheating either...

cheapie clutches are not the way to go

pics here: http://www.members.shaw.ca/droppedaccordingly/Van/

no time to resize so linking will have to do...

Modded my driveway today with a new toy

http://memimage.cardomain.net/member...79_10_full.jpg

I'l post some better pics tomorrow.. gotta wash it. I'll have it on the road at the end of the month

threw a new front tire on the bike today

went from a michelin pilot race soft compound to a michelin pilot power street tire. i miss the soft already :(

Due to a small mistake, engine was removed today, tranny popped off, flywheel off, and then reinstalled everything. When I get back from my trip on thursday, I'll make it actually run this year.

replaced the fan belt today and after that my water pump developed a leak. bummer