REVscene Automotive Forum

REVscene Automotive Forum (https://www.revscene.net/forums/)
-   Okanagan Automotive Chat (https://www.revscene.net/forums/okanagan-automotive-chat_153/)
-   -   Mod of the day thread (https://www.revscene.net/forums/197911-mod-day-thread.html)

ColinK 03-31-2006 04:09 PM

Quote:

Originally posted by Dirt Rider
ya tell me about it..your better off to not have it at all.. then to be bent / cut/tucked away some where... you MIGHT get away wiht it if thats the case.. but in your window = 100% fine
I'm sorry, so your saying if it's in your window it's legal? Are you sure about that?

Tchleung 03-31-2006 04:17 PM

Yes window = Illegal

honduhman 03-31-2006 05:03 PM

Has to be at the most forward part of the bumper.

In the grill is illegal too. I got pulled over for having it bolted onto my grill in my WW bumper.

proshoraca 03-31-2006 05:16 PM

ya apparently 118bux or something for the window, "dangerous weapon if crash occurs" or some b.s. like that, so if its not correct, dont put it on at all i guess.

jeffh 03-31-2006 10:21 PM

did some more DA de-ghettoing with mr dhd today, wee

Dirt Rider 04-01-2006 09:08 AM

Quote:

Originally posted by ckrieg
I'm sorry, so your saying if it's in your window it's legal? Are you sure about that?
oops haha shoulda been a bit more clear, fine.. not fine.. u know :p aka.. u'll get a ticket 100% of the time.


plus... modded my motor onto the floor, hawk pads going in, new rotors if i can get em by mondayish. anyone have a cheap b16 header?

proshoraca 04-01-2006 01:22 PM

chipped car today
vacuum'd one floor area, then started to smell hardcore electrical smell, so stopped there. haha.

RRxtar 04-01-2006 05:28 PM

rims are on :)

Dirt Rider 04-01-2006 06:07 PM

35 inch tires on the pickup.. make way for the chop saw tomorow... hah..

Slo40 04-01-2006 07:47 PM

said goodbye to my baby today, hope to see her in a week...


details later :D

fourtirefire 04-02-2006 01:03 AM

went to throw in some new goodies today...
http://i7.photobucket.com/albums/y29...teg/img003.jpg

but came across a slight issue on the last corner to swap... fucking lower strut mount bolt decided to snap off and sieze in the bushing....

http://i7.photobucket.com/albums/y29...teg/img007.jpg
the remnants of the sleeve and bolt
http://i7.photobucket.com/albums/y29...teg/img006.jpg

fourtirefire 04-02-2006 08:16 PM

so after lots of searching, i managed to round up a new bushing/sleeve/bolt that didn't require pressing in (i couldn't remove the arm from the car without mangling the outer bushing)
and got it all back together.

the thing rides like a go kart now, turn wheel, it turns....

oh, and the header is just starting to change colors!

Tchleung 04-02-2006 08:50 PM

set camber, set caster, set toe today by eyeball :P:D Drives alot better now haha.

Average Al 04-02-2006 09:02 PM

fired up the car with out a dp
freakin thing sounded like a semi truck

fique out small things, fuel injectors blah blah
glad to see danny u got your suspension in

fourtirefire 04-03-2006 04:56 PM

Quote:

Originally posted by G2Teggin
set camber, set caster, set toe today by eyeball :P:D Drives alot better now haha.
you know you can set your toe with a tape measure.. just requires al not being lazy and holding the other end for you! :D

Tchleung 04-03-2006 05:08 PM

easier to tie a string around the car

down_hill_dog 04-03-2006 09:58 PM

visitied Kelowna Dent Removal Today and they did an amazing job of my hood... Looks like new :D

Tchleung 04-03-2006 10:15 PM

Mod of the day:

Got new tires mounted on my other 17's. Woot for cheapo Federal tires!!!

fourtirefire 04-03-2006 11:38 PM

hey talk about coincidence.. swapped my old goodyears up for the RS2's tonight... fuck those were a bitch to seat the bead, took lots of manipulating...

balancing them was fairly easy luckily.. sticky weights own

girlcrazy_420 04-04-2006 10:40 AM

Decisions Decisions Decisions... My stock turbo downpipe from the turbo is cracked to shit and falling apart... Now... to replace with stock downpipe, or swap on the Ford Probe GT downpipe which'll involve less micky mousing... :)

Mattster 04-04-2006 06:02 PM

Quote:

Originally posted by down_hill_dog
visitied Kelowna Dent Removal Today and they did an amazing job of my hood... Looks like new :D
Best and cheapest place to go too.

saloman 04-05-2006 08:55 PM

COUGH!
http://i35.photobucket.com/albums/d1...r/95a02259.jpg
COUGH!!!

paid a little visit to my favorite and best toy store in the world the other day! hehehehe ;)

ColinK 04-05-2006 09:02 PM

nice rad...wtf is that?

fourtirefire 04-05-2006 10:06 PM

Quote:

Originally posted by ckrieg
nice rad...wtf is that?
that's an A/C condensor, not a rad! :p

ColinK 04-05-2006 10:21 PM

yea whateva :p


All times are GMT -8. The time now is 12:16 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net