ive never had an igniter go (knocks very firmly on wood desk) but i have replaced 2 caps and rotors and this is my second dizzy for other reasons

Mod of the day:

Set Base Timing
Sorta Set Idle
Installed 750CC Injectors


Took a few horus just to dial them in to idle and drive decent but atleast now I can redline at 5psi for now :) Part throttle tuning is such a bitch

ya what a stupid idea by honda, everything else seems so good, and then they go and do something like that haha(internal coil b.s.)
Hmm modded my holding-trunk-open-sprung-rod thingy back into place as it popped out. Picked up chip today, sweet.

mod of the day
new rad
new 14 inch slim fan
new upper rad hose
new honda blue coolant
new thermostat
new tranny oil
installed rebuilt jdm s1 tranny
new throwout bearing
new clutch release spring
re-installed interior
fixed battery box location
re-installed harness for better location
very big thanks to
down_hill_dog
azn_ignite
couldnt have made it through all the crap without these guys, they did half the work and none of the bitching
also foxy_da9 for not letting me roll my tranny down the drive way when things didnt go my way
tuned by tommy

Jeff says:

"Gee thanks guys, i'm sure glad my car is back.... infact SO glad that i'm going to stand on my motor and look oh so jdm teehee w3rd werd"

http://i4.photobucket.com/albums/y14...2/19956798.jpg

Mods of the season:

Took front seats/dash/door panels out of my wrecked Van, put them in my good one.

Bought some Lino, cut to size, installed into cargo area of good van (still have to move one seat over from the other van, and bolt down the seat that's in there now).

Removed steering collumn cover/Ignition asembly from both vans, installed the good ignition into good van.

Popped a battery in good van, started it up :D. Took it for a quick scoot down my alley.

Just gotta clean things up a bit, do a little trouble shooting and she should be good to go.

Also painting the bottom flat black instead of ugly green...

yay! new hood :)

Mounted my new 225/45/17 rubber:)

soft squishy rubber too i hear??????

Yes it is :)

Mod of the night:

Tuned Shanes SC civic a bit tonight. Runs alot better now. but no where near perfect yet.

car up on stands, harness disconected, axles out coolant on teh floor ready to pull motor tomorow... new exedy clutch , new water pump and timing belt here we go :)

No, his whole wirring or setup was just finicky because he said Anthony couldn't get it to work either trying a diff way. Either way, I can't say I felt tooooo comfortable working with Emanage since in reality, it's quite primitive and well, for lack of word, sucks. All the features they add in it are somewaht useless, seems more like bells and whistles to me for what you're getting. I would ahve to take a look at the new Emanage Ultimate. See how that is.

^ oh really? is that ever interesting! I always thought the emanage was pretty good (shows you how much I know about tuning and FI cars! :p)

i got a bobble-hipped hula girl...she will be on my dash for the RS meet :P

broke another clutch cable, this is getting kind of gay

Degreased my engine the other night....and then after about 8-10 kms, it began the old water in the distributor and spark plug holes sputter. Once it started sounding like anthonys car, i pulled over and parked it for a bit. When i came back, It was running well enough to get to my shop so I could drop off the new tranny. Once there and idleing, as I'm reaching in the window to turn it off I hear POW and look up to see a thick cloud rising from under my hood. Upper rad hose blew, nice 4 inch split. Had her runnin with the new hose in 45 minutes.

For some reason Nathan that does not surprise me in anyway buddy!

So my parts that have been on order for way to long are now in Canada Yay!!! But they are classified in the heavy weight category so they need a forklift and a special truck to haul then. Ahhhh you would think that a shipping company would have a forklift.

modded my front plate onto my car finally to avoid anymore 108$ no plate tickets !

FYI... if your plate is improperly displayed its a higher fine then if you dont have one on at all.... ive learned that the hard way.

modded a puddle of coolant on my floor mat :(

i looked in all data and they say 7.4hrs for a heatercore

good luck!
hopefully it isn't as shitty of a job as konrads vr6 corrado, if you remember that from wayy back in the day in mechanics?

oh what?! that makes NO SENSE!

Installed the new shoes today and raise the suspension about 1" everywhere. taht coupled with taller tires have raised me about 2" more off the ground

ya tell me about it..your better off to not have it at all.. then to be bent / cut/tucked away some where... you MIGHT get away wiht it if thats the case.. but in your window = 100% fine

^ tom... PICS NOW... pls :)