[NashMan]

well the reson why i was late was i had to pic friend up as you know

the rx7 meet up was fun but who is all going down the to arean in vic for the auto x i gona be there how about ypou guys

sign up time is 10 30 i wil be there erly of cousre caue si wan to race on ya ei found a boost leak so i not going to shim tell i get that house fixed it the the lower inter cooler house do you have spare paradox since you go sperco inter cooler or did you re use it

[Enraged]

i have a spare elbow from the top, not sure if it helps at all. i had to work until 2, so i couldnt go to the autox :( but ill drive up with you guys on thrusday definetly! you guys want to meet somewhere or what?

[NashMan]

sure it was blast i got 2nd in my div

i needed to shave off 5 sounds my last run what have done it but i did not pop the clutch like i should have in stead i tried powering it wroung stoved into cone

then got pissed off and spunt he shit out of my tires


chould have doe it but i was mad that i poped hte cone


any ways meeting up befor auto may be be fun

[Paradox]

NashMan, if you need the bottom hose to the I/C..

when i took mine off, they basically cracked apart, they were all hard and falling apart.

check the prices from lordco for a new one or something, if its too much you can have mine.... its doubtfully any better condition than yours now tho

whatta you guys say we meet up at goldstream park on the side of the highway there before the auto x?

maybe me and toby can meet up earlier and cruise there, then meet you

[Enraged]

sure.

allergies suck.... ugh......

[NashMan]

yae that whould be cool


yae do you think you can take pic of the house and stuff and is you inter cooler like black ish mine has red tone to it wana trade not your speco bu the stocker

[Paradox]

which hose are you talking about? the one that goes from the bottom of the I/C back underneath the car? or the one that goes from the top of the I/C up to the intake?

[NashMan]

well the hous ei need is the one that goes into the intake

and do you still have your stock ic



hehehe i had blast at the auto x did very well my last run whould have bean very good but i hit a cone and then lost my time and started to drive for fun hehhehee


i was agasit a mustage and comaro the comare beat me but i swaer is i did not fuck up in my last run i chould have came cloase or beaen him i don't know



ps some times i wish i ran 10 psi but didn't and got he stock shifter bushings

it getting to be like hell shifting in my car keeep hit the fork when shifting

[deathangel]

when do you guys want to meet i might be there i'm not sure i will go to autox my clutch is slipping really badly i'm just running too much HP through the stock clutch!

[NashMan]

if you want i go a spare clutch disk caues the turbo and na use the same disk but diffent persure plate


so i will duble cheak if i still have it thou but if i do you can have if you wish

ps it is about 3 weeks old too

[Enraged]

autox starts at 6 on thursday? how about we meet at golstream park at 4? how long does it take to drive up?

im not planning to race, but im up for a cruise and watch the autox.

[Paradox]

Originally posted by deathangel
when do you guys want to meet i might be there i'm not sure i will go to autox my clutch is slipping really badly i'm just running too much HP through the stock clutch!

say 6:30'ish at goldstream park? i just hope the weathers nice again!

i know how you feel.... ive been taking it fairly easy on my tranny lately. it sure isnt grabbing as nicely as it used to :( the good news is im most likely getting it completely rebuilt with higher line pressure, 3k stall torque converter and a bigass tranny cooler

NashMan, i still have my I/C but i dont know if i wanna get rid of it, incase i buy another car i can swap the stock I/C back into the supra and keep the spearco

i'll try and grab some pictures of the hose soon

[Paradox]

Originally posted by Enraged
autox starts at 6 on thursday? how about we meet at golstream park at 4? how long does it take to drive up?

im not planning to race, but im up for a cruise and watch the autox.


4's a tad early man.. hehe the autox doesnt really get going til after 7pm... and from goldstream its about a half hour or 45 minute drive

[NashMan]

Originally posted by Paradox



4's a tad early man.. hehe the autox doesnt really get going til after 7pm... and from goldstream its about a half hour or 45 minute drive





hehehe 45 min baaa the way drove up there hehehehhe 30 max

but you got to love the way i drive on the high way use both lanes and hopefully i will be run high boost agian but not tell i get that house fixed or replaced



should i wash my car baaa never i liek it looking liek shit cuae is can do nothing about ti plus i got new dent in my car bloody drives

but i was woundering if you wan tot trade ic caue smine has red ting to it and i fine it not pretty

[Enraged]

oh ya, duncan. i was thinking parksville.... 5 hours sleep on a Monday.... oh well... so 6 or 6:30? lets invite some ricers to drive up with us and leave them in our dust :)

[Paradox]

6:30 sounds about right

geezus christ, i just took my car out for a burn.... the dense cold air makes one hell of a difference, broke the goddamn tires loose at 80k not expecting it. guess my back tires are getting bald and in the rain thats a bad mix but ahh well

umm NashMan i dont think i want to trade i/c's with you.. since yours is older and as i said before i want to keep mine incase i sell the car and swap it back in.

if its got red stuff on it, why not just paint it? and flush it while you're at it :)

[NashMan]

aaaa the funny part isd i would be to lazy to fix it any ways


i am bad that way


so lets make list for who is going to meet

i think we should not park and gold stream instead at payless gas staion on the highway so poepl can see our cars


who thinks the payless gas staion is the best place ot meee ti think so


any ways so far this who is comeing

NashMan
enraged
paradox
death angle


humm think we can get any more poeple

i know silver mark 3 whould go but his car is not done yet


ps do you think we should invet the rx7 group there cool guys and all

[fuzebox]

I think I should bite the bullet and sell my car to this guy in Richmond who is lowballing me by at least $1000... I'll have to put the extra $1000 on my visa to buy my supra, but perhaps it will be all worth it :)

[Paradox]

i dunno, i say just keep it Supra's..

then we wont have to wait around for everyone to show up, etc etc. we dont want too many people.
prolly best to finalize this tommorow or thursday itself.

fuzebox, yeah sell it soon and get a supra! Hehe :) too bad you cant get what you're asking tho. atleast the prices of MK3's have drastically come down over the last few years

i remember in the buy & sell, i couldnt find one for under 15 grand in a not-too-distant past. now you can probably get a 89+ in sweet condition for 6-10k easy

[Enraged]

i think hes buying his moms boyfriends car, already has some mods done to it.... i still want to see pics of it... its only $1000, GET THE SUPRA ALREADY!

well, i just ordered the silicon connectors to replace the throttle body one (ryan might remember my stock one is cracked and held together with duct tape lol) and i just picked up some stainless steel T-bolt clamps, so im hoping ill get them this week, or next week. im also workin on gettin a used FIPK for US$75, not bad, and it comes with a cleaning kit.... might be exhaust tubing next week..... and a security system to install myself next week..... i LOVE MY CAR!

[Enraged]

i meant its only $1000 less than your asking price, not $1000 to buy the supra... ya...... ok........ummm....

[Paradox]

heh sounds like some good car investments Enraged

i just invested in a black & decker mini-vacuum which is pretty damn powerful for a lil thing. our house vacuum is no better than one of those 1980's dustbusters... finally i can get all the damn cat hair outta my car!
yes thats right, cat hair.. my cats dont usually go cruising around with me, but their hair sticks to me and then over time its just condensed to the point where there was like cat hair on everything inside the car.. hehe, most of its gone now tho. thank god.

i wish the weather was a little nicer so i could start cleaning the outside of my car, i know the claybar is supposed to be applied in the shade and on cold paint, but baaah i dont wanna do it in the rain :(

[Enraged]

do it around 8 or 9 pm, the suns usaully off the car by then. i might buy an orbital waxer/buffer so i can cutpolish my car.

typing with one eye = hard on a curvy keyboard....

[Paradox]

you pickup a eyepatch on your shopping spree, too?

arrrr matey

[Enraged]

yes. i tried driving with it. not good, got in an accident, killed 3 people. then some witness was sayin she was goin to the cops, so i wacked her too.

[Paradox]

nice work :D

might be easier to take off the eye patch next time, tho dude

[NashMan]

but yae who is all out for meeting at the payless gas staion on the highway at lkst we can grab some grub and shpow off or cars plus poeple3 get tot see em at 6:30 as said befor

called toyota aboutt he house that i need to replace um 130 buck's for house that is about as long as pop can give me a break


lorco here i come


but i whould really like your house enrgaed i chould use that so can you give it to me hehehe

[Enraged]

ill bring it on thursday if you ICQ me to remind me. its just an elbow, so im not sure if it will work for you or not. its the bend connecting the 3000 pipe to the plastic pipe leading towards the filter.

[NashMan]

yae that whould be great do you think you can bring it to the meet


plus death angle i bring the disk for you if you wan tit i bring it any ways it like new and i not planing on useing it caue si got new one in my car and hte next one will be a trd one


free is good

[Paradox]

autox is next week guys

doh

[NashMan]

aaaa we can still have meet and crusie around thou and maybe play some pool at q ball you know fun stuff and just roll around in our supra's a reak havick on vic



oh yae toby do you think i can pic up that hose befor we meet ect





so is every one up for that i am

[fuzebox]

So I decided to accept the guy's offer... It's actually $2k under my asking price, but only $900 under what was my absolute minimum :(

Ah well. Turns out my mom's bf needs the car for another two weekends, then I can pick it up, probably July 2nd or 3rd... It's in Prince George, so I'm gonna WestJet up there and drive it back.

That gives me the next 2 weeks to pick up some small things like gauges and whatnot.

[Enraged]

congrats! its heavier than the miata, but a WHOLE lot faster! take some pics for us.

[NashMan]

so cool guys 6 30 at payless gas staion on the highway going to duncan by spencer school then will will rip some shit up and take some pics


it has subway in it

[Enraged]

that was pretty cool, i got to prove to myself that my car is currently the slowest of the 3 :( oh well, it was fun trying to catch up to nashman. post some pics guys, but NOT that one of the sticker on the back of my car...

[Paradox]

ooo but its such a happy honda! :D
http://www.realityexit.org/supra/minimeet-06-20-02

umm i havent resized or optimized the pics or thumbnailed or anything, i gotta go back out here pretty quick. i'll get that done later..

was fun guys, nashman post ur pics!

[Paradox]

Ooh one of the pics is really dope of your car, Enraged

Check it out! (http://24.70.223.167/supra/minimeet-06-20-02/003.jpg)

[Enraged]

lol

thanks, i finally have a picture of my car. with its huge wheelgap. and those fugly wheels. oh well...

after seein that pic, i think ill look into polishing those wheels...

[Paradox]

i dunno, i think it looks pretty good, too bad for that little dent on the side tho :(

[NashMan]

hehehe dag i hate that littel dent of my car for some ass hole


oh well i run out of toe's and fingers when i start o could how many dents i got


but yae i get you the pic's

[fuzebox]

Ah sawblades...

Too bad I won't be able to afford wheels for a bit... *sigh*

Just found out today there are two quarter-sized spots where there is paint missing on my supe... Ah well.

Counting down the days... Hopefully I'll be faster than you too Enraged ;)

[Enraged]

maybe... downpipe is only a month or so away.....

[Paradox]

shim shim shim!

[SilverMK3]

w00t!

Finally picked these up from my friend's house today! They're a set of Infinity Reference 452i's to replace my completely blown stock speakers.
http://portfolio.itas.mala.bc.ca/dnunez/carwash/infinity1.jpg
http://portfolio.itas.mala.bc.ca/dnunez/carwash/infinity2.jpg

Any tips on installing them? Do I have to take my entire door and trunk apart?

Nice pics of the mini meet! Damn Enraged, That pic of your car makes me wish I had a targa. You paint is mint! (except for the dent :p)

[NashMan]

t4h back panles are fun to take off there alot of work for whati did but the front easy as pie



ps i neeeeeeeeeeeeeeeeed your ic paradox mine has hole in it i pay monbey and i give you my old one as well if it does you any good money money money

[Paradox]

hope that I/C works out for you NashMan, its in pretty good condition..

baha, on the way home i weighed my car at the scales by elk lake, came out to 3836 lbs with all stereo stuff, tool box, full tank of gas and me in the car. OUCH!

i guess without the speaker box, tool box, me and less gas i would be down around 3500-3600.

damn thats one heavy mofo, no complaints from me, it goes like stink and handles awesome!

[NashMan]

sweet you car is litter then tobs i think i not sure thou

[Paradox]

yeah, fear my boat! :evil

may be heavy, but christ, hold on when i give it some gas. heheh

[Enraged]

no, mine came out to 3560 without me in it.... it was 3800 with me.... ouch... go faster by losing weight, eh? hehe

and thanks for the comment SilverMK3, but my paint is actually quite bad up close... lots of little scratches, and the sideskirts are pretty much sandblasted, since its original paint. nothing a completely new RSP paintjob cant fix ;) good choice on speakers too, they sound great for the money. dont be like me and nashman and spend thousands on stereo stuff....

hows your car coming? we'll be up in duncan on thursday for the autox, it would be nice to see you there.

[Paradox]

yeah no shit, lets see some more supras at auto-x!

ps - what size are those speakers? you might have probs with anything bigger than 4" in the back

[NashMan]

for the back ones they wil fit it just littel box you can cut to make fit


as for my car yeeeee haaaaa boy 9 psi rocks better the 6 to 7


nice boost leek eh


but now you must fear meee muahhahahahhahaha


next fix is the door hings and the body bit and soon to make hard pipe and stuff but right now i stay as it weight for next pay cheak



ps i wan tot see all the pics there not up and stuff

[Paradox]

so my old I/C worked out for ya?

sweet man, glad to hear it!

[NashMan]

here is cool link toby sent me hey mury you got to see this
http://www.sccowc.com/Video/6thgear.mpg

[SilverMK3]

Hey,
Yeah, they're 4" speakers. They're a bit deeper than the stock ones though so it was kind of a pain getting them into the doors. I had to bend the "mounting ears" to get them to fit. I'll tackle the rear speakers tomorrow.

As to the car's condition, well its finally insured and back on the road. My back tires suck though, one of them has a not-so-slow leak and the other one's totally bald on the inside (from the junk yard). I'll hopefully get new ones next paycheck.
Also, I have to find time to get under the car again and tighten all the bolts that I played with before I'll trust it on the highway. Its had a week or two to settle and I'm sure some of them are pretty much ready to fall off :(

Enraged:
Your paint is better than mine! My passenger side rear quarter panel is completely covered in gray primer. It looks just like my paint, except dull, but it still pisses me off that when I bought it they told me the paint had just "faded from the sun".

I'll definately come up to the next mini meet. I work on thurs so I can't make the auto-x tho :(

[NashMan]

hehehe sliver mrk3 do you still hav ethe old brakes form you old rear cross meber and stuff


ps if we have mini meet you will have to let me drive your car caue si have driven a na for along time i wan to see if i happy driven na then turbo and yes i will let you drive my car ps is it
5 sp


and i got alot of na parts still looking for nay just ask


oh yae ps hop you don't have any space between the basket and the baffle if you do make gaskt of some sort and plug the port up and it will sound mint

[Enraged]

what time do you work? the autox isnt until 6:30 (?) we'll show around 7 probably.

i figured on the way up, we should stop at the top of the malahat at that rest stop, its a PERFECT place for pictures!

[SilverMK3]

Enraged:
I work from 5:00pm-1:00am (closing shift @ the theatre) :(
I also wanna get those tires and do a bit more maintenance before I subject my poor baby to any abuse like that! :p

Nashman:
Yeah I still have the old crossmember. What do you want off it? rotors, calipers, pads, brake lines, e-brake lines?

Yeah u can drive my NA, its an auto. I don't think you'll be too impressed, its definately in need of a little TLC. When I finish paying off my credit cards I'll start restoring it and fixing the little things. My cam covers are leaking, I could use a tune up, and my muffler is rotting out from the inside so it makes a terrible noise between 80-90km/h

As to driving your 5spd.... I don't wanna wreck your clutch! lol :o

[Enraged]

pay off your credit card, and start savin for the NA-T swap, screw fixin you NA auto hehe :) id be more than willing to help do it if you want help.

[NashMan]

i can see it now toby toby help you do a na to t swap

siteing on lawn chairs drinking a beeer say that part goes there ooooo that one looks dirty it must go by the oil pan some where



as for na to swap hummm was it worth all my time sure i guess it is cheaper then buying anther supra kinda

but the easyest way whould be to buy a turbo car that is chrashed or some thign and srip it of the parts you need

[NashMan]

k this is what i am after the rear rotor's and stuff e brak pads all the all the other junk related


and ebrak cable plz say that you have one

[Enraged]

thanks ryan... lol

and i prefer crown and coke, but that might be a bit highbrow for you ;) lol just kiddin bud... actually im enjoying on of those right now...

[NashMan]

hehehehe i knew you whopuld love that coment heheheh


but today i tweak my shoulder when working kinda suck but in the end i may get paid to sit on my ass that i really don't want to caue si can get more hour's working then getting compo


where are you silver mrk 3 i need ot know what condtion yuor brakes and all the stuff you got


ps i can help you get more power out of your na when we meet up and such and some are free some are not i used to be na and there great but there is some cool shit you should know about

[SilverMK3]

Hey,
Nashman I've got all the stuff just sitting in the garage. The rotors are getting a little bit of surface rust on them, but it'll come off the first time you use your brakes. The pads should be fine, there was no squeeking or anything when I had them. All the cables are in good condition.

Enraged, I might do the NA-T swap sometime in the future, but probably not until after I get a new paint job and restore the interior. I'll probably have worn out the 7MGE by then anyway. I'd be happy for any help you guys could give me though. If I can find a cheap JDM turbo engine I'd slowly build it up and then drop it in once it already had a MHG, an upgraded CT26 and all the supporting mods.

What kind of mods did you do to your NA, nashman? Once I fix my leaking cam covers I was going to increase my timing, re-torque my head bolts, get a K&N, and maybe do the free CAI mod at the same time. I'll need to get an exhaust pretty soon too.

[Paradox]

What kind of mods did you do to your NA, nashman? Once I fix my leaking cam covers I was going to increase my timing, re-torque my head bolts, get a K&N, and maybe do the free CAI mod at the same time. I'll need to get an exhaust pretty soon too.

there's the AFM mod you can do too, its on SOGi list

[NashMan]

well bump timing is one of them

run 92 octain

afm flapper ajustment

puch out cats or just run stright pipe biger power increas

2.5 exhuast

flowmaster muffler 2.5

turlen in your gas tried it befor big power

get rid of that air muffler and run civic pipe air intake

bosh p4 tiped plugs good for na's not that great for turbos


and the list goes on i can get into like eninge stuff



oh yae you did not say if you had the e brake cable if you kno what i mean you know for the hand brake connects and goes down tot he rear parking brake

[SilverMK3]

Hey, yeah the e-brake cables are there. sorry, must've forgot to mention that in my post.

What do you have to do for the AFM mod? And what's the air muffler - the intake resonator? If so isn't that neaded for the AFM to work properly? Also I thought you lose low end power on an NA if you free up the exhaust too much.

[NashMan]

well you afm had spring tenstion flapper you just loosen it up so you run richer and no you don't need the air resnator at all caues once you put k$n filter(drop in only) on ti still caues terbulace ect so it is not need plus it ugly


as for exhuast just punch the cats out and run 2.5 or 2.25 2.5 is what i had gave me more zip onthe highway and weh i was runing rich and 92 octian and stuff it ran great


punch cats 2.5 cat back whith free flowing muffler

one other thing to add is get oil catch can they do wounders

oh and the reson why i said the drop in only is cause you dont need the shineing fliter at all caue sit is not need in turbo maybe

runing header don't even bother does nothing


all so upgradeing th eig system will incress power caue shte nas ig system was not that great but works fine


alls so one other thing you can do to you na is add a turbo

get the manfold/ turbo /down pipe/atmospearick bov/ boost mbc or ebc and some small thing and push 4 psi and you will eat supra turbo alive


any way if we meet i can tell you some stuff and i very intrested in takeing thous parts off your hand

i was thining on doing that as well

[NashMan]

ok who is all going ott he mini suprqa meet to go tot auto x this thursday at 6 at payless gas staion whihw the subway in it on the highway going to duncan to the right of the like in lagford area


i going to good put your name down and we will see you there so far who is going



toby
mury
ryan



and that all i got right now

[Enraged]

yay ill have boost! purolator tried to deliver my silicon connecotrs today, so ill pick them up after work tomorrow! paypaled for the K&N FIPK today, hopefully will be here in a week... im called Lordco to order the exhaust piping tomorrow....

[Paradox]

i'll have MORE boost hopefully tommorow!

woohaww

i figure with spearco I/C i should be able to go higher than 12psi on the CT26

new o2 sensor tommorow too.. good thing, too. i think my cars getting like 5mpg right now, i guess when the o2 sensor dies it just runs super rich.

i think im screwed for the dual pillar pod tho :( suprasport isnt ordering ANY more.... so umm im most likely going to be credited for the value of that, or just have it put back on the CC. who knows

so theres no MBC in your future, Enraged?

[NashMan]

ummm humm the stock ct 26 on 12 pounds humm that will do not much reson being


any were from stock to 10 psi you will note power improvment after 10 psi 2 pounds is nothing but hot air caues the ct 26 is can't push air any more air in less you have a bigger wheel

sure it will push 12 pounds but it it does really nothing caues of the trim size ect and plus you will be over load the poor littel thing

staying at 10 psi is fine 2 extra pounds i don't think it will do much as for power ( but you can try it any ways )

and what do you mean by exhuast piping toby

[fuzebox]

Originally posted by Paradox
i think im screwed for the dual pillar pod tho :( suprasport isnt ordering ANY more.... so umm im most likely going to be credited for the value of that, or just have it put back on the CC. who knows


I ordered a full pillar replacement in gray from Lotek yesterday, and the guy told me on the phone that it would ship in 3 days... So we'll see :)

Only 1 week until I get my car... Bussing sucks :(

[Enraged]

the Ct-26 doesnt start running out of steam until 15 psi... is been proven several times over... 12 psi is what most people stop at becuase that is where fuel cut is. if you want to get around fuel cut, you'll need 550s and a lexus afm or a VPC.

as for the mbc, im goin to keep lookin. for the options out there, ebc arent worth it unless i want to spend $1000....

filter is on its way..... sweeeet....

[Paradox]

yeah.. even Reg Riemer said the CT26 really starts to pickup around 12psi

as for wearing mine out anymore or damaging it, no big problem as long as i see my Greddy 20G sometime in the next decade..... hah.


Fuzebox, Yeah im gonna try a direct order thru LoTek aswell. let me know how soon you get it at your door.

[Enraged]

just picked up my silicon connectors, nice shiny black :) ill put those in with new plugs and change the oil tomorrow after work...

paradox, the cars lookin good as usual... what were you doin in town?

[Paradox]

hehe yeah i wasnt totally sure that was ur supra but i thought id wave anyways..

umm.. i was looking thru all the car lots for a cheap'ish winter car

there is like NOTHING out there.... arggh. i checked basically every lot in victoria, also went thru the auto trader, no luck.

just hope i can find something cheaper up island... keeping the supra 100% off the road in the winter would be awesome.

ohh new o2 sensor in too, i still idle like crap. but gas mileage is waaay better, tranny fluid changed too, with 75W90 and GM addidtive. makes it feel a little smoother

[Enraged]

when was the last time you changed your plugs? just a thought, but my car ran a bit better with new plugs. if not, its gotta be your S-AFC tuning

[Enraged]

oh ya, the other reason i went into town was to find out about an alarm. well, i chose the alarm, gettin a few toys with it too.... goin to cost me $525, installed myself. them installing it would bring the total to $850..... learn by doing, right?

[Paradox]

Originally posted by Enraged
oh ya, the other reason i went into town was to find out about an alarm. well, i chose the alarm, gettin a few toys with it too.... goin to cost me $525, installed myself. them installing it would bring the total to $850..... learn by doing, right?

are you going with that crazy ass viper system? that'll be a challenge to install, but far worth the effort :)

btw i just pulled my car hard on the highway, and after o2 sensor and tranny fluid it felt a lot better, i didnt really get a chance to let er open til tonight. instead of the ford LSD additive, i put in GM additive, so far it feels great. transmission is a lot smoother compared to before, but still not to the spec i want..hehe.

and yeah, im thinking of getting some NGK plugs and wires soon.. ive just been putting it off cuz i had new toyota wires put in last december, but the toyota wires arent too good compared to the NGK's (i forget which type, but theres one set that are supposed to be amazing)

i need to get a spark plug wrench socket

mainly i think i idle like crap because of the lexus AFM and no adjustment screw. i notice the car only really stalls after the BOV shoots out a ton of air, so maybe the BOV is still too tight..

what would you guys suggest for the best spark plugs?

[NashMan]

well that is easy get the same ones as mine there on my list of crap i have done to my car




so every oe is still up to meeting at payless at 6 on thursday

[fuzebox]

So how many of you guys have done a head retorque? I'm wondering how much a dealership or some other mechanic would charge... My gf's uncle's shop probably has all the tools I'll need, but if it's cheap enough than I'd just get someone else to do it.

[Enraged]

i havent done it, but i should soon. i might just change the headgasket (to a new stocker) with ARP bolts in the near future, just to be safe.

its actually not that hard. i could have done it, i just didnt have the time. take off the 3000 pipe, coil packs, the different vaccuum lines, the throttle linkage, etc, then just remove the cam covers. you can torque them down with the cams in, they just have to be at top dead center apparantly.

i still want to know if i can just swap in ARP bolts without changing the head gasket at all. i dont feel safe torqueing the old stockers down, it would be a bitch to get them out if one of them snapped...

[Enraged]

and yes, im goin with the Viper, but not the remote start version. im also getting remote hatch pop, i should have gotten it for my beretta, its a very handy feature. they also have a 2 way pager coming out in august or september, so when that comes out ill get it for the added security. and then ill put a sign on my car that says "This vehicle is protected by a homicidal maniac with a baseball bat."

[NashMan]

you are funny man there toby oh and if you get eh viper what ever alram you must glass senore or movement lieki had in my car


ps viper alarms are ok but there better out there mine was fucken anoyinh some times as long as your remote has more then 2 buttons it is fine if it has less you are going to hate it



but is every one still up for this thursday at 6 at payless


ps you know what i doing whiht my old inter cooler i gave it to friend and we are going to pop it into his mazda 626 turbo

aka his car never came whiht inter cooler so he should see some hp gains from this mod plus it will be kinda fun doing it as well



ps i need the wireing out of 86.5 supra none tems if you guys can find me this i whould really ow you one

caues it is the last thing i need to do


and silver mrk 3 i neeed to know wheni can pic up your parts for my car and such

e mail me at

Rdemetrioff@shaw.ca
or icq at 46638419

[NashMan]

i know some one that can tune you s-afc

to run right he works on my car wheni am to lazy

and i think he will not charge really any thing at all as well are u intrested i will ask him about it when i go drop my buddy off there to pic up his car

[Enraged]

you guys get to see my partly black interior tomorrow :) i think i can do the whole thing with 2 or 3 more cans of paint. not a bad way to spend $50 hehe

[Paradox]

cool, what parts of the car did you paint?

also did you just spray it on or did you do any prep. work to the surfaces beforehand?

i wanna do the same thing soo bad

[SilverMK3]

Nashman, you can pick them up any time you want. I work every day except this coming sunday so it'll probably have to be sometime before 6pm (unless I work matinee that day).
I guess I should bust out the old haynes manual and pull the parts off - unless you feel like doing it?

As to the wiring off an 86.5, there's nothing in Nanaimo, when I was looking for a parts car to get the crossmember from all I found was a TEMS 87 NA, and an 88T at South Island Imports.

Enraged, do you have any pics of your work in progress?

[fuzebox]

Originally posted by Enraged
you guys get to see my partly black interior tomorrow :) i think i can do the whole thing with 2 or 3 more cans of paint. not a bad way to spend $50 hehe

Let us know how it goes, I'm planning to paint my interior black too (after spending $95 on a color-matched Lotek A-pillar hah)

[Paradox]

arggh i just got caught out in the rain without my roof!

driving at night with the roof off and it not being cold is kinda cool, tho :D

reminder to self: keep roof in car at all times

anyways break the news Enraged, what'd ya paint? like i said, i want to paint mine, but im so fearing removing the dashboard :mad:

[NashMan]

well in order to panit you will have to take off teh dash bprd


and cool thanxs silver mrk 3 i willget some tiemand oic so fo that stuff up from you alll even dring my car down


and mury i talk to my friend and he will tune you stand alone fule mangment thing for case of beer you intrested i trust him so it is all good


what you say you intested

[Enraged]

1 can did the 3 main peices in the hatch. both side peices, the back peice, and the storage cover. for prep, i just wiped them down, lightly sanded with 600 grit to rough up the surface a bit, and sprayed it on, i did about 3 coats.

im not sure if ill be coming tonight, im not feelin to great, and the weather is suckin right now. well, back to work for me, ill let you guys know if im not goin to show.

and murray, WHAT are you thinkin leavin your roof at home? lol, i always have mine in the hatch!

[NashMan]

so who is going to auto x and stuff

[Paradox]

goddamnit! did it rain hard at auto-x after i left? once i got closer to victoria it was just pissing down rain..

not a bad auto-x, but it seemed slower than before for some reason, maybe cause of the colder cement? hell, i dunno.

neways i'll have to see how these pics came out...

[fuzebox]

Got this message today from the shopping cart site Lotek uses:


The status of this order is currently: Shipped

Thank you for shopping with Lo-Tek, Inc..


I have to say I'm impressed. Should get it next week I guess... So much for JeffM's warning of waiting 2 months!

If only I could afford a boost gauge now :p

[Paradox]

damn dude, i ordered a 60mm burgandy pod last FEBUARY! and have yet to see it from suprasport.com...

hrmmm.. think maybe its time i cancelled that order :D

[NashMan]

yae i think so you should cancel that order and stuff

ps i think my tire is flat not i got ot got get plug for it

[Paradox]

haha shitty man... i was looking at my back tires yesterday and the drivers side rear isnt lookin' pretty

looks i need new rear tires

got my turboXS MBC today, feelin' too lazy to install it in this crappy weather tho.. arggh

owell, i should make a decent test pilot for the turboXS in the MK3 supra. lets just hope i dont run into a bunch of boost spiking.

[Paradox]

and its blue to boot!

wee more blue stuff :D

[NashMan]

oooo it pretty


wel tire fix hehhee i love gettting stuff done for free plus fixing tire int eh rain kinda sucks


well i fond ot know owns that driven sticker bord aka mistubie gto it kens car from sound sultion he converted it to turbo as well but i don't know how he did it thou as i never really looked at it but his ic pipes are kinda small



i wounder if he did motor swap or some thing or just turbo that na based bottom end hummm


but it a walkk sticker bord

[Paradox]

ok boost controller is going on tommorow if it doesnt piss rain too much

what do you guy suggest for plug wires and plugs?? price doesnt really matter, i want no detonation at all, pure spark.. and anything that'll help me from running so rich

im running so rich, its BAD!!!!

when i drove up to auto-x i didnt have my S-AFC tuned to lean it out at low revs tho


ps - tire suggestions are needed...

[Paradox]

hehe who wants to see what you can find inside bibles in vancouver? sorry this is old and perverted, but funny as hell...

pussy inside bible (http://members.tripod.com/~xMysterex/bin/twat.jpg)

[NashMan]

ok as for tires i whould get pair of these whould make you really happy there like just about the best tire you can buy but exp as hell

http://www.tirerack.com/tires/tires.jsp?tireMake=Bridgestone&tireModel=Potenza+S-03+Pole+Position


as for plug wires get what i got pretty much the best you can get ngk wires nkg laser plugs
cost me just about 250 for the plug and wire i think or some thing like that


or you can get eh tire's i got but they will were faster the brigston ones but they have just abotu the same grip but i think the brigstons will be better

all so the friestone frie hawks are good but i whould go brige stone all the way

[NashMan]

one thing mury have you ever thought of getting fule puser regulater so you don't run lean when you get you new turbo

same as whiht better oil cooler

[NashMan]

so who is all going to go to the auto x salum at the arena this sunday


i am going to be there are you toby and mury or who ever els wants to come

[Paradox]

Originally posted by NashMan
one thing mury have you ever thought of getting fule puser regulater so you don't run lean when you get you new turbo

same as whiht better oil cooler

yeah im thinking of ordering the AFPR mounting kit from suprasport, then getting a paxton AFPR from lordco or somewhere..

thanks for the tire and spark info, dude...

and nope, dont think i'll be going to that auto-x hehe, its too damn early in the morning

[Paradox]

i just installed the turboXS boost controller...

my first responce .. HOLY SHITE IS 15psi CRAZY!

where i have it set now, it spikes to 15psi, holds for a bit then slowely drops down to 11 or 12psi

i checked the wheel in the turbo again too, the play isnt too too bad and its not chipped or broken, so thats good i guess.

im still running far too rich, i think the AFPR is a must if i want to continue with using my fuel setup.. arggh gonna cost more $$$ than i expected to get it running well with the Lex AFM/550's

[NashMan]

i had some fun today i was driven along and out of the blue bang i see black supra so instead of going home like i planed i desided to fallow him i was an as and tailed him bit then he sped up keeping his pace

then he started for the highway so said this might be fun so i fallowed him hit the red light just befor the highway i was hehhe time to have some fun and sat there gave him nod like what up man


and wasy i said na i will give hi the hole shot and bang as i though he floored it then i said time for me to go so i did and i was keeping his pace hit 3rd was whiht him hit forth and was side by side hit full oter boost and started to pass him then i saw the most funnest face when he look at teh back of my car and it was like wtf hehehehe and you know what that means right buddy thought i had a na muahahhahaahahhahahahhahahahah


any ways his car was runing more rich then you car mury and he was back fireing like made man he all so staled his car as well

spec on car that think he is runign ssbov/3 inc exhuast or some sort to free flowing by the looks of it same tires as i run and spiffy wheels it allso is a 89 plus of somesort

never under estamte my car muahahahha my rear diff makes me a very hard person to beat untell i hit like 400rwhp then my rear diff is to tall


any ways i had fun and shocked the hell out of him we should try to find this guy and get him to come on rev scean and maybe one day make supra club of some sort any ways me need sleep caue si got to do nothing at work tonight caues i am on wcb hehehhe get paid to do easy shit no hard stuff for me for awail

[Enraged]

i went camping in Bamberton, i just got back. i got something new! a 3rd degree burn! i was usin a lighter to melt the end of a rope so it wouldnt fray, and a drop of the burning rope landed on my finger. took off 3 layers of skin, hurt liek a sonofabitch...

and i have to go to work at 2.... and then i work all day tomorrow... shit.

next weekend we're goin campin in Parksville, do me some MINIGOLF! hehe

murray.... you hav eto give me a ride in your car now that your runnign 15 psi :)

[Paradox]

damn dude, ive done the exact same thing with burning rope... definetaly doesnt feel pretty. specially after it sticks to you and melts hardcore.. be expecting a nice scar from that. hehe

what day are you going to parksville? i think i'll be heading up thursday, not too sure how long im staying this time tho.

i might have to put my sawblades back on my car, or get new tires before i make that trip.. left rear is like totally bald in some spots :(

and yeah dude 15psi is just fucking nuts compared to before, i wonder what sorta HP #'s the CT26 would be making now?
it sure feels like a lot more, i was trying to tune it in a little better earlier today and think i gained some power up high, since theres no fuel map past 12psi the S-AFC basically controls all of that

[Enraged]

im goin up friday for the entire weekend probably.

saw you drive past my work, why didnt you stop and say hi? hehe

id say your makin around 350-370 rwhp, depending on your tuning. you would probably do the 1/4 mile in high 13s if your tires were good, i would think. apparantly you can run mid/high 12s with around 450 rwhp, with an NA diff (Dr Jonez ran 12.9 with 460 rwhp before he blew his engine).

so lets get this straight. you need: 550s, lexus afm, afpr, upgraded pump, s-afc, and ? thre is an adjustment screw on the Lexus afm, its under a cover though i think.... people were talkin about it on supraforums. if you took it out, it might lean you out a bit more.

i need a new job so i can catch up :) or maybe ill just go upgraded ct-26, and a nice 75 shot :D

[NashMan]

man today i was just tired as hell for some reson i chould not stop falling asleep


the auto x track looked like blast i wich i whent up there in time to race caues it was high speed couser whiht lot neat o turns


ps i saw supra up there but it was na and it stick on it saying auto x even thou i never saw him race befor plus buy the looks of it he got his cut or heated it is your clour toby



ps wheh was the last tiem you guys took you wing off boy wheni took mine off it did not look right so i put it back on but any way i notice that water was starting to leak in and such thous the bolt hole's so i cocked em up and such lucky i cought that sooner or i tchould get some bad rust there i think you guys should cheak dose not that that much time

[Paradox]

Originally posted by Enraged
im goin up friday for the entire weekend probably.

saw you drive past my work, why didnt you stop and say hi? hehe

id say your makin around 350-370 rwhp, depending on your tuning. you would probably do the 1/4 mile in high 13s if your tires were good, i would think. apparantly you can run mid/high 12s with around 450 rwhp, with an NA diff (Dr Jonez ran 12.9 with 460 rwhp before he blew his engine).

so lets get this straight. you need: 550s, lexus afm, afpr, upgraded pump, s-afc, and ? thre is an adjustment screw on the Lexus afm, its under a cover though i think.... people were talkin about it on supraforums. if you took it out, it might lean you out a bit more.

i need a new job so i can catch up :) or maybe ill just go upgraded ct-26, and a nice 75 shot :D

Reg's Lex AFM/550 mod doesnt call for a bigger fuel pump, i just got that to prepare for higher boost... but yeah id say to be able to fully tune past 12psi you'll need the S-AFC, dont really need that screw in the AFM.

AFPR looks like a must... when i get out of my car now, all i can smell is gas. also when i installed the MBC i noticed black soot ontop of the CT26.. hehe looks like i got a oil leak in there somewhere, or crappy turbo seals. i'll slowely work on murdering the CT26 over the next few weeks, then get it all back together with the 20G. i just ordered the suprasport AFPR install kit, so now all i need is a paxton or aeromotive AFPR. hrmm.. hope lordco can get em, ordering shit from suprasport takes too damn long

[NashMan]

just got t lord co down town by toyota and ask for jason if he can't find one one eles in teh lordco chain can



yae i going to be makieng hard pipes soon ad it going to be so easy


alls i got to say is copper will work it will not melt tell 1100 and most liky get soft around like 850 so heheheh time to make some hard pips plus it will be kida fun making my supra bit diffent then every body els's

once i don i give off the mesure ment and such


and the best part it not gona cost me that much

[Paradox]

what should the total cost of doing them in copper cost?

if it can be painted, i might be interested... but the copper look itself just doesnt sit right in my mind (or under my hood) ;)

i hope to get some aluminum hardpipes, then maybe powder coat them black. might be expensive.... but so is everything else that ive had to do on my car lately.. arggh!

after i rebuilt the tranny, my car better be worth like 50 thousand dollars or im gonna be pissed! altho, in reality id be lucky to get like 20K, which is sad because ive yet to see another MK3 in as good of condition as mine and with as many mods on this island... or anywhere for that matter. ive seen 91T 100% stock with a waaaaaaay nicer interior, i guess thats about the closest.

im generally pissed at my car right now, that o2 sensor didnt change a damn thing and im still idling like garbage, i think the seals on the turbo are toast and theres black shit shooting out of the turbo itself (altho i first saw this before i raised boost, i think it was from when i tried to drive my car with the S-AFC totally messed and using the wrong AFM setup)... MVP better hurry up with my 20G before all hell breaks loose.

the only good thing out of all of this, when i pull "1" thru to "D" at full throttle, it gets going so damn fast i barely have any time to check the gauges :D

[NashMan]

hehehhe power is fun but to much power can make me lose my load and that is no fun caue's i what it to last longer hehehehhe

the one thing i liek about my car is it looks like shit and will soone be much more powerfull to serton dagree will i ever get after market turbo most likly not i whould most likly upgrade the turbo it's self and just run new 550 and lex and uped ct26 at run 12 to 14 psi and i will not have to upgrade my inter cooler


but i will not do that for long time not ontell i own my car fully or maybe to anther supra



and mury why use 1 to drive it is points less in most case you can break your trans that way then reack teh converter and such and plus the power you are pushing i whoul not recomed it just use drive

ect and drive ect makes you car red line high akak eletoricle controled transmissoin

[Paradox]

dude i can almost gaurantee that using "1" thru "d" would make the car atleast a second faster on 1/4 mile

it just doesnt pickup aswell if you leave it in "D" and punch it.

[Paradox]

changing spark plugs is not a fun job in these cars...
im doing it right now

hehe

[Enraged]

doesnt take me more than 15 min with a 5 min "beverage" break. :D

[Enraged]

oh ya, and tires? i want BF Goodrich KDWs for my car, the are one of the best tires tested by Sport Compact Car. I've also heard that Falkens new model is great in the dry, but not so great in the wet.

[Paradox]

Originally posted by Enraged
oh ya, and tires? i want BF Goodrich KDWs for my car, the are one of the best tires tested by Sport Compact Car. I've also heard that Falkens new model is great in the dry, but not so great in the wet.

marlon at pennisula quoted me $529.80 for the BF T/A G-KDW 17/40/235's about a month ago, he even printed out the quote, so now i can hold him to his price quote! heheh. as for wet driving, i doubt my car will even be on the road in the winter, if i dont get a winter beater im just gonna drive my moms 240sx or something.

as for replacing plugs, christ i dunno how you can pull it off in 15 minutes. i guess after you've done it once it'll be easier next time. i only replaced sparks # 1,2 5 and 6. 3 and 4 are a biotch to get at without removing the throttle cables and ICS piping. taking all that off was a first for me, so i didnt want to get too hasty. i'll do that later.. i left the coil pack cover off too, thinking about painting it, but if i paint it and remove the turbo badge, you guys got any ideas of what i can use to glue that badge back on their after its painted?

also started polishing the 3000pipe, and yeah Ryans right, it does look kinda funny when its polished. i might just paint that too.

none the less after new plugs im no longer super pissed at my car, and for the first time ever today i accelerated so fast that the CDs in the little holder thing under the CD deck went shooting out of there... boost rules! :D

[Enraged]

its easy.

take off the 3000 pipe (its harder for me since i have an larger upper hardpipe). remove the throttle cable bracket (2 bolts on the side of the valve cover, and i think 2 on top). remove the coil pack (4 nuts, one at each corner). its even easier if you have one of those wobbly ratchet attachments. i should change my plugs and oil and filter this week...

it was scary the first time i did it, but its very easy now.

i also my hardpipe with some high temp paint, looks ok, better than bare slightly rusting metal....

im so fucking bored.... my favorite Counterstrike server is down and i suck on all the other ones... i have heartburn (Mikes Hard Rasberry tastes like bottled shit).... and i work at 6 fucking 30 tomorrow....

[Paradox]

yeah seems easy enough, i just didnt wanna screw anything up... you know how our cars can be, like half the time to work on one thing you have to remove like 10 other things.. heh.

anyways, did you paint anymore of the interior of your car? i saw some pics of a guys car on supraforums today that he painted, and it looked pretty damn good.

also im a dumbass, i might need the silicon connector for the 3000pipe now, just to be 100% sure im not boost leaking. i noticed that it was pretty brittle and hard when i removed it.. what size did you order from hosetechniques? and how did it work out for you?

ps - Ryan, NGK lasers seem way better than Bosch plugs. Ohh and i went to lordco in sidney and asked about the AFPR, that jason guy must be like a general manager or something because they said to come back tommorow and ask for him (at the sidney location)

[Paradox]

Mikes hard rasberry? geez man, borrowing drinks from your girlfriend? :P

[Enraged]

it was the only liquor in the fridge... im all outta crown...

it came out to around $120 i think, thats for 3 2.5" and 1 2.75" connector + shipping....

two major roadblocks for painting my interior... the seats, and removing the dash...

[Paradox]

im painting the 3000pipe blue... should be interesting to see how this turns out.. hopefullly not too gay, or else its going black.. heh

i polished it for awhile with a drill and polishing bit, so the paint should look ok..
ill post pics tommorow when its all back together. :D

[NashMan]

heheheh don't you love the polished look kinda stick pout liek sore thumb eh as for my contorol the ones you want you can get them at home depot for high persure hose's that what i gona get hehehe when ever i get paid that tonight babay hehehe


oh this is just me talking here but bfg tire belone whith the usa made car but that is just me in less you own a truck


oh ps there might be faster car ont he road soon my borther finaly piced a car to buy he bought it whiht cash the litter fucker

2002 rsx type s

hey has plans to get 17 or 18 what ever he pics plus to turbo it
all whiht out load eh don't you wish you had that much money lieing around





we should all so start shoot more toyota supra people around here and get em to get togter and stuff



oh and tob's if you want me to help you pull your dash i will be glad to help even thoud i have doen it alot now i think i have done it like 3 times in the last year and going to be doing it again when everi fidn a bloody wireing harness

[Paradox]

hrmm i dunno if i like this, i might paint it black.. or get another coupling that isnt orange, hehe.

[Paradox]

RSX's are nice cars, they rev real high too... only problems

no torque
front wheel drive

if it werent for those drawbacks, id consider selling my supra and getting a RSX Type S just for the reliability factor and having a brand new car would kickass too..

but ahh well, supras are too much fun. it'd be hard to buy anything else

[NashMan]

humm i whould go for black if any thing or just darker blue if any thing frist drak bule then if it still don't look right make it black



baby bule is to tame for man


i am poor me need money so i can do stuff caue spay day is so dame close and i am out of money

[NashMan]

hey guys i was think maybe we should make web page based on our supra's and such you know some like supra club thing i not good at makeing web pages but i maid one or 2 in my life time i know mury can make one ro do i stand to be corrected or even silver mrk 3 or toby but i never hear him talking about computers

[SilverMK3]

Hey, yeah I'd be into making a web page. I've done a few (Just finished a 2 year diploma program on Digital Media).

I don't know if there's anything worth mentioning yet about my little NA, but I'd totally put something up about your turbos.

Here's a couple sites that I just finished recently:
http://portfolio.itas.mala.bc.ca/dnunez
http://www.vireb.com

[Paradox]

im pretty good at making deranged graphics..

http://www.realityexit.org/design/index.html

[NashMan]

so who wan tot make the web page and what should we call it and stuff

Van Iland Supra'z

that is my title i can think of what can you guys think off



i need some more plug ins for my photo shop so i can do some art buti don't have any right now my cd's got lost


now how wants to runt eh web page ect of cousre every one here

like me paradox mury toby and silver mrk 3 can be staff


by the way what is you name silver mrk 3 i kinda lost it some how


ps funky art there mury

[Paradox]

i can host the site easy, do graphics, layout, etc

[Enraged]

Van Isl Supras would work... but not Supraz with a Z.... its vancouver island, not the inner city ;)

give me access to a digicam and ill take pics of my interior makeover for the page :) or even the exhaust i build....

[Enraged]

either of you guys up for a trip to vancouver to go to a dyno? with the DP im getting, i (and the guy selling the DP) wouldn't mind getting it dynoed....

[Enraged]

oh ya, looks like the DP is about 6 weeks away, so it would be end of the summer to go to the dyno. dyno costs $100 for 3 runs i think.

[NashMan]

naaa you cna use the dyno at u vic or the other place here as well


ok Van Iland supra'Z it is


now every one make neat logo head page thing and we will see which every one parfers and such



i going to nanimoe tommrow and i gona meet u whiht silver mrk 3 and pick up the parts he is gpona give me plus talk abit and maybe get some sort of meet going when he can come down ect blaaa bllaa you know what i mean

[fuzebox]

Originally posted by Enraged
either of you guys up for a trip to vancouver to go to a dyno? with the DP im getting, i (and the guy selling the DP) wouldn't mind getting it dynoed....

I'll meet you guys here :)

[fuzebox]

So I Westjet up to prince george... There's my car, lots of paint scratches, needs a good wash, and fugly sawblades... But a nice strong engine! :)

http://www.fuzebox.org/photos/07-03-02-princegeorge/640/P1010003.640.jpg

Boy am I glad it's an 89... the sexy back end :) I'm also glad the 3" exhaust tip doesn't have that "look at me, I drive a Honda" look to it. Nice and rumbly though.

http://www.fuzebox.org/photos/07-03-02-princegeorge/640/P1010004.640.jpg

Took the targa off for the 9 hour cruise down (that's including an hour's worth of stops)...

http://www.fuzebox.org/photos/07-03-02-princegeorge/640/P1010008.640.jpg

This guy in a Topaz tried to race me all the way to Cache Creek... he was actually a fucking psychopath, and almost killed himself many times... This picture was taken at 190km/hr...

http://www.fuzebox.org/photos/07-03-02-princegeorge/640/P1010010.640.jpg

I love BC...

http://www.fuzebox.org/photos/07-03-02-princegeorge/640/P1010018.640.jpg

This car rocks (stock boost can kiss my ass though)

http://www.fuzebox.org/photos/07-03-02-princegeorge/640/P1010017.640.jpg

[NashMan]

so how long have you owned it for and stuff heheheheh

[Enraged]

it REALLY needs a wash...

but i gotta ask.... why the HELL did it take you 9 hours! it took me 8 hours to get from PG to the ferry in Vancouver! and that was in my BERETTA! hehe i pinned that speedo more times that i should have lol

either way, very nice car! targa is great, isnt it? is it just the light, or just dirty on the front bumper? and can someone please tell me the difference between 86.5-88 and 89-92 rear bumper?

theres a dyno at uvic? but can anyone use it? i also heard theres one in langford somewhere. the reason i wanted to go to vancouver is becuase they have a DynoJet, the most used, and most accurate dyno available right now....

[NashMan]

there is no diff in rear bummber in any way between the year the only thign that changed int he rear was the moding lights and wing modling looks a bit lower


so i have herd about the modling

[booter22]

Smee again... okay guys fixed up my exsaugst leak my car F*kin calls now... running about 10lbs
so now theres no reason this car shouldnt sell FAST... 7000 and its basicly mint... Let everybody know
1990 supra turbo for sale CHEAP!!!

[fuzebox]

I think I have an exhaust leak, but I can't tell until I get a real boost gauge :p

Full bost comes around 3500 rpms... it goes a little higher than 2 mmHg on the stock gauge (but not quite to where 3 would be)

I've got an intake/downpipe/exhaust, so shouldn't it pull to 4mmHg (which is 7.8 psi iirc)...

I'll go through in the next few days and check all the hoses, but I don't think this is right.

[Enraged]

common boost leak is often the stock blowoff valve. take it off. if you can blow through it, its hooped. the stock boost gauge is totally useless, pay no attention to it.

i wish booter had been sellin his car when i was lookin, i would have taken it off his hands right away....

[booter22]

i wish there were more people like enraged around :-) i wanna sell my supra quick so i can get a new toy :-)

[Paradox]

sweeet, you finally got ur supra! :D ;)


looks like it has great potential.. im guessing it wasnt winter driven in PG?? hehe, i used to live there -- winters arent pretty.

now its time to begin modding... lol, welcome to the world of owning a supra :)


must have been a sweet cruise, that route is great, really nice... always fun when you see the odd mountain goat too, or a gigantic pine cone.. hehe

ps - i just got back from parksville... drove up there and back again today, lowered the boost down to 10psi (hopefully for decent mileage). some guy in a riced out newer cavalier tailed me the whole way trying to race me.. finally i just gave up and punched it for like 5 seconds to show him it wasnt no 4 banger... out of all the possible places i could do that, a fucking cop was like right across the road on the highway.. all he did was flash his lights at us, thats cool since the road was in the middle of nowhere.. but we were pretty much above the speed limit at that point. i think ive just found another reason not to race rice (or potatoes) :D

[Paradox]

Originally posted by booter22
i wish there were more people like enraged around :-) i wanna sell my supra quick so i can get a new toy :-)

haha i need a winter car bad! (and something to swap a 5spd out of, perhaps)

but damn dude, how much mileage is on your car??

[NashMan]

i am gues it past 2 a long time ago maybe 250 or tad higher


eaxhuast leaks are easy to find just take oyu had block you muffler if it stalls no leak if she still keep a going bang you got leak if there is no change in ideal then you got big big leak


most of the time it the catback gasket or manfold gasket or in man is where the manfold bolts up you loose bolt alot


i still need new body but i 7000 in the hole and hoigh milage cars are not the great car to give hp they will spin bearing and al the other crap that is if it really high milage plus the turbo may be like just about dead



why tht ehell do you wan to sell you toy any way

[Paradox]

about the website, how about "Van Isle Supras"?

[NashMan]

ok this is what we got so far


1 Van Iland Supra's
2 Van Iland Supra'Z
3 Van Ilse Supra's
4 Van Iland Supra Association




now vote whch you liek the best i like 4

[NashMan]

well i going to nanimo today to pic up some brakes and chat whiht silver mrk 3 and hang whiht some friend's


ps i painted the rear quter fender on my car humm look bright caue sit is new paint heheheh but it will look better once it get dirty just like the rest of my neat shit moblie

[Paradox]

http://www.realityexit.org/VIS

this's a start...

(i can change the name later)

[fuzebox]

Gah!

Museum light came on last night when I got home after the trip... I topped up the coolant resevoir and it went away.

This morning I can hear the waterfall when I rev...

I'm gonna burp the coolant system tonight and then say a few prayers.

Haven't even had the car 24 hours!

[Paradox]

Originally posted by fuzebox
Gah!

Museum light came on last night when I got home after the trip... I topped up the coolant resevoir and it went away.

This morning I can hear the waterfall when I rev...

I'm gonna burp the coolant system tonight and then say a few prayers.

Haven't even had the car 24 hours!

mine does that too sometimes, its quite often for it to come on in hard corners... hope it isnt a BHG tho, that'd suck :(

[NashMan]

well in hard conner is it just slosh aroudn


any way it summer so you will have to fill it as it will avaporate

[Enraged]

i get the museum light once in awhile, usually no more than once every two months or so, but i think i have a small leak somewhere. i get the waterfall once in awhile too, but i've been told that it might be the exhaust gas recirculation thing coming on, because it comes on to help heat up the engine.

does it have a MHG? if so, check the torque on the bolts, they should be at least 70 ft-lbs. if its the stock gasket, torque it to 70 or 72 ft-lbs in 10 ft/lbs increments (ie stock 52, then 62, then 72).

[Enraged]

whoops, posted this in the wrong thread hehe

btw murray, the page looks sweet! you guys up for the drive next thursday to the autox? if so, lets stop at that rest stop at the top of the malahat, that would be a perfect place for pics.

murray, have you done any polishing? i want to know what i would need to polish my wheels. i was told to use marine paint stripper, and that would get 90% of the paint off, then polish it to a mirror finish.

[Enraged]

im bored, so im posting again :)

what do you guys think about getting some color-matched paint for my car, and painting the moldings around the body? check out my 1.5 min photoshop job hehe

[Paradox]

moldings look kinda coo dude

ive done some polishing, not really tho.. just used a polishing bit on a drill.. its a pain in the ass to do, even if the parts are off the car, i have some polishing compound too

it'd take alotta work to get some stuff to like a mirror finish.. check out
http://www.rx7turboturbo.com/robrobinette/polish.htm

SilverMk3 do you want to help with this site a bit?

and i still need your info NashMan and SilverMK3, or anyone else with a supra who wants to have a pic and info added.. check the page and email me :)
http://www.realityexit.org/VIS/

[NashMan]

well i am in naniom or what ever it spelt like any way now to drive to silver mrk3's house any way i will post to tell him i going there

[SilverMK3]

weird! I just refreshed and saw Nashman's post!

Hey Paradox, yeah I'll help on the site, what do u want me to do? It looks pretty damned good as it is! We need more content tho - just dunno what. I'll send u my info tho.

[Paradox]

Originally posted by SilverMK3
weird! I just refreshed and saw Nashman's post!

Hey Paradox, yeah I'll help on the site, what do u want me to do? It looks pretty damned good as it is! We need more content tho - just dunno what. I'll send u my info tho.

cool... yeah i was thinking more content too, i'll leave that up to you guys :)

can you do pearl/CGI or javascript? im a lil rusty at javascript but whatever isnt covered in 'the javascript bible' isnt covered at all.

just let me know what you're good at, macromedia? graphics? etc..

anything would help out lots

[Enraged]

too bad i have no digicam, i could have done a how-to install a K&N FIPK, including how to break a bolt, how to go "whats this fuckin bracket for?" and how to tear open your almost healed 2nd (or is it 3rd?) degree burn!

K&N FIPK.... i LOVE the sound when you floor it hehe, id say another 5-10 hp, according to my butt-dyno.

[NashMan]

you got to be kidding my toby your but dyno i whoud ahve to say your ear dyno in less you had a stock paper filter that you chould not see thou and stuff


is it the real filter kit or the one you where thinking on fabbing in and such


any who thanks dave for the rotor's and stuff helps me out alot sorry for breaking your ratchit and plumber wreak it stuck open ehehehe i replace it if you want me tooo


i was thinking cuttiing my box open but i don't know it it will really do any thing case eninge heat is bad eh


so you dave wants turbo now ehehe i took em for boot in my car ehehe i didn't push it that much but he had fun far as i know of



but his car is in very good condition his eninge bay is super clean and looks like 90 based na motor but i am not serton thou
i got pic's of our cars and such but we got to plan supra meet that dave can make it to we will leav it up to him when he has the time and such lucky fool he gets to watch movies for freee and gets paid to do it tooo


any way i going to try to have fun down here and drink beer 1 a beer ehhehe i can drink all night i not going to work caue si kinda tweaked my shoulder when i was driven and was painful to switch gears


so i will post the pics soon mury and send em to u on icq

[Enraged]

its the FIPK. bought it for US$75, good deal since its US$130 new. they guy i bought it from oiled it up real nice, so oily in fact, it got all over the box hehe.

still havent figured out what that bracket is for.... but i DID notice an increase in power. not alot, but a bit... now im just wondering why my temp sensor isnt working now...

[Paradox]

how you liking the "wooosh" sound when u give it gas? took me awhile to get used to, but it seems cool now... ehhe

ps - i ordered that new K&N heatshield from suprasport with the money that was supposed to be for my POD.

the heat shield is originally off some sort of suburu i think, it looks pretty cool

[Paradox]

shield

[Enraged]

groovy.... i was goin to use a stainless steel bucket lol

no, im actually going to make a heat sheild out of aluminum i think.... then ill post plans on supraforums...

[SilverMK3]

Nashman, thanks for the visit. Sorry I was gone half the time but I was capturing some video to my computer off of a camera for work, that's why that girl was there. Don't worry about the ratchet and shit, its no biggie.

I hope those brakes work out for you, they were fine when I had them. Lol, u were working your brakes pretty hard with your driving considering they need to be replaced... ;)
Damn my little NA feels heavy and slow now.

Paradox, for the web stuff I can do lots with JavaScript, I know a bit of PHP but not any CGI/Perl, and I can do a little bit with Flash (not much). I don't really have any ideas for content right now, but I'm working on it! I like your design, so I'm trying to figure out what I can add to it.

Hey Enraged, I would either keep the mouldings, or shave them off completely. Here's a quick photochop of what you'd look like:
I think It'd be sweet. (Gunmetal rims too)

[NashMan]

i might paint my rims black just got t find time and see if it will look good and such i don't know i will post pic of my car and paint wheels black and see what it looks like still in nanimo but my sholder still hurt's i choud not drive to vic it hard to drive stick whiht hurt shoulder

[Enraged]

you know how much work is involved in shaving the moldings? hehe i think ill just paint them. as for the wheels, i want to strip them and polish them. its a cheap alternative until i can get some rims.

well, im headin to parksville today, so ill talk to you guys on sunday or so.... minigolf here i come!

[NashMan]

mini golf


any way toby read this i posted on and ther tpic in this form

ps toby i know alot about exhuast to much free flow will hurt and stall turbo motor sure on full boos tit is fine but when greaing down and such basicl runing whiht out boost and deecell you will some time stall out



to big of pipe and you go slower to small and you resritck itit



bascily try this blow thogh you mouth and then opn it up more as your moth gets bigger it hurt to blow out more air



ps big car crash on the highway when i was comeing home weight for like 1 hour or more

[Enraged]

im not goin to argue... i knwo whos right :D

ya, we're leavin tomorrow mornin now.... we almost got stuck, we tried to get around it... nope.. and the mill bay ferry was backed up 3 sailings.... so now we're goin sat and sun night.... wasted god damn $1.85 on ice! hehe

[NashMan]

here are the pics that i took whe i whent up to daves house to chat and pic up his old brakes and stuff (thaks Man)


any way here are the pic they turn out ok i guess some are good some are crap

[NashMan]

and again

[NashMan]

this is the cleanest egine i ahve sea even cleaner then murys and even mine

[NashMan]

hgjhg

[NashMan]

jhgkjh

[NashMan]

gkughlkj

[Enraged]

mmm i like silver! the wingless look is sweet too.....

[Paradox]

jshajhads <-- dont mind me

[Paradox]

im gonna steal those pics for the website.. :)

ahhh good thing i went up to parksville on wednesday night, wasnt sure what id head up, but i guess today would have been a bad choice.

1 hours wait? damn thats when a PS2 in your car would come in handy :)

anyways.... i painted my 3000pipe black ... put on some new hose clamps, etc.. that blue was just wrong, had to do something about it. ive still got some touching up to do. and the "3000" needs to be polished more

[Paradox]

and heres a picture of my engine a long long time ago......
notice any changes? :)

[NashMan]

eheheh yes i can see the diff you have done


did you file the 3000 smooth and get rid of the cast lines ect


look like i gona make my hard pipes soon i have the money and every thign now alls i need is time


and i drove daves car kinda makes me miss na power but oh well
i chould ahve made me a na power house but it whould have cost way to much be it whould have bean sweet



i gona mack web page tree on lay out i usly am good at thous typ of thing and such cool whiht you and such

[Paradox]

yeah i put on a strut bar and a ARP sticker. lol

i can bring my laptop out to meets or wutever if you want to go over web layout stuff, ive got a decent little laptop: sony VAIO 500mhz, 320 megs ram, ethernet adapter, etc etc.. and best of all i can dump pictures from digi cam on it in seconds, i can also do video dumps once i get the adapters.


silvermk3, your car looks dope dude, but that email you sent me the pic links didnt work :( please email me with wutever info about ur car you can think of and pics. i'll post

same with you NashMan

[Paradox]

just to remind any of the supra guys (again)

www.realityexit.org/VIS

dont care if you go to all meets or auto-x's or wutever. aslong as you're on the island and want to join the MK3 Club
check the info, email me with pics and the following..

name:
nickname:
model / year / engine:
engine modifications:
suspension modifications:
interior / exterior modifications:
brake / wheel modifications:
a little something about yourself:

to paradox@realityexit.org

thanks
;)

[Enraged]

nashman - about exhaust backpressure and a 3" exhaust.... think about it.... what is a turbo? ya, thats right, its a BIG restriction......

[NashMan]

but there is such thing as to much that is all i saying
i don't have the right formulae to do but there is one and stuff

so we should plans this next meet up when dave (silver mrk3)
has spome tiem all he's got to do is tell us when

going down to the hardware store the hard pipe sage begines as fo today

[NashMan]

well here is the frist pic i took i did the top end now the lower

it made out of copper but it qworks just as good

stage 1 of hard pipes



ps i might plaint it black or should i keep it that clour it will not rust

[NashMan]

one more

[Paradox]

hey looks good, i always thought of copper being well, a copper color

let me know when you figure out the bends down to the I/C from the upper pipe

im interested in doing the same....

where did you get the piping from?

[NashMan]

home depo heheh it not copper it it andest steel i got alot fo it now so if i do ever finsh this that i will i give you wan ti got left over but i need more hose in oder to finsh it


as for ic from 300 pips you can do some what what i am doing but ti will be all pipe

but he lower half i going to have to got ot muffler shop to get some bends that home depo ddin have to complete 300pipe to ic

but from ic to turbo will be easy


wow my brithday is coming up soon ehehe

the 14 gee i am getting old 21 now geeezzz

ps do you have your old front rotos from when you replaced your at all


and i going to post pic and see what white or black wheels will look like on my car can you photo shop thing i donremmber how to do it and if you tell me how that whould be great


all so do you think i should paint that pipe black i think i might caues it kinda bright and stuff

[Paradox]

i just need a I/C pipe from down from about the washer fluid holder area.. then i can just get a coupling and hook it up to the hardpipe for the HKS SSBOV

nope i dont have my rotors? if thats what you meant.. they were all warped and useless by the time i removed them :(

id keep your I/C pipes that color, it looks good shiney...

and as for painting your wheels black, i dunno man, im not a fan of black wheels on white cars.. i think it looks really ugly. maybe take some paint stripper then clearcoat them so theyre all shiney instead. i think thats what Enraged is doing, ive seen it done before and looks way better than black..

[NashMan]

i got to much curb rash inrder to make em shiny i find

but in oder to make that work you will have to replace that neato pipe you go inoder for it to work so you will ahve to get your ssbov vavle re wealed on


so you don't know how to photo shop my wheels diffent coulors

[Paradox]

viola

[Paradox]

polished.. looks much nicer IMO

[Paradox]

i dont want to replace the pipe the HKS BOV is on, i want to make the rest of the pipes aluminum or something... from where the black circle is on this pic down to the I/C. then put a coupling on where the red arrow is..... just an idea

[NashMan]

i may have bend that might get rid of ruber house as to the ic but i whould need ot see your car i have the bend of meatle right here it may work i think it has good eghu bend to it but i am not sure caues your car is not here but i gest amet on it and stuff


paint my white and such that is one clour i have bean thinking of


oh and do you think you cna make my mirrows blac as well

[NashMan]

your lucky the bend i got will most likly work you can like drop by one day or some crap like that and do the fianly cheak if it will work but i really think it will


ps i paint that pipe black look nicer so far but ti not in my car it drying right now and stuff

[Paradox]

ahh too bad, i liked it shiney :(

any of you guys drive in the rain today? it was fucking crazy... i didnt think my crappy burned out Ct26 could push much CFM anymore even at 13-15 psi, but holy shit. i punched it on this road to see how the traction would be... second gear at like 80kph, soon as the turbo spooled i was red lining the tach. and the back tires were spinning like mad ! :eek2:

freaky shite.. im getting new tires tommorow, finally

[NashMan]

humm i waighting for my pipe to dry fully eheh i think it looks better back i take pic of it when it is in and such



so do you wan tot se if that piep will work whit your car such


hehee i want to go driven in the rain it so much fun

ps what type of tres did you get and such

[Paradox]

you mean the pipe down to the I/C right? what bend is it? and what width?

i got the BF T/A G-KDW 17/40/235's... got a good price on em too.

driving in the rain is scary man! specially with totally bald tires, i was just spinning em today cuz i got the new ones :D

[NashMan]

aaaa bfg are for mustages and stuff but that is just what i think


as for pipe size it is all good same think ness and all that junk and will go all the way down to the ic


ps do you have mixed matched rubber

[fuzebox]

I took my BOV off yesterday, and I can't blow through it... but it still flutters, so I'm sure it's busted.

For shits and giggles I'm venting it to atmosphere now... stalls out every once and a while, but eh, sounds a lot cooler ;) ) Most of the time while the turbo is spooling up I can hear the BOV pushing tons of air... Definately leaking.

My Porsche 911t Bosche valve comes in on Wednesday, we'll see if that makes a difference.

I'm also going to do the ghetto PVC hardpipes, a la JBLMK3. We'll see how that goes, I'll give everyone an unbiased review ;)

[Paradox]

haha i always wondered how a 7M would perform with the stock BOV right off of there. ive seen DSM guys do it with no probs..

anyways, cool FuzeBox, get some pics of the ghetto pipes! :D

keep in mind that NashMan's setup probably cost around the same using steel? cost him like 20 bux for pipes.

[Enraged]

i go away for a few days, and you guys post alot! nashman, that pipe looks sweet! just a suggestion, make sure you put a lip on the ends, or the hoses can blow off. know what i mean?

anyways.... my adventure...

1.) Friday. we head out, theres a crash on the malahat, we manage to escape the carnage, and say screw it, we'll go tomorrow.
2.) Saturday. we get goin, but my GF lost a contact, so we head to her house to get her new ones. doen and done, start the car, start to roll down the driveway.. cough cough cough pfffttttt....... engine dies.... the same thing happened awhile back, and the car was REALLY hot (extra 2 people and packed full hatch with heavy campign shit), so i figure maybe a vapor lock or maybe i somehow flooded it... i ended up doin the same thing i did last time... we drove to crappy tire, bought new plugs and a $15 socket set, i changed all the plugs and put a few drops of oil to regain compression... BAM she starts RIGHT UP with TONS of blue smoke haha and idles BETTER with some Bosch Platinum plugs! no more little misfires at idle, more power throughout the revs... horray! so instead of headin back to my house we say go for it, we boot it to parksville! set up camp, walk on the beach, have a huge fire back at the campsite and get shitfaced :D
3.) Sunday. wake up, buddy is hung, pukes behind the tent haha so we leave him in the tent, go for food. after food (smittys in parksville... stay away....) we go pick him up, and go to MINIGOLF! i won, $0.10 per point, i won $0.50!!!! horray! after that, we get food, more liquor, more wood, go back to the campsite, hang out get shitfaced and have a HUGE fire.
4.) Monday, well sorta. 3am it starts POURING rain... and the tarp over the tent is leaking everywhere.... GF flips out, knees me in the back... ouch... anyways, morning comes, we dry everything out, head back home. WRXs are FAST! i had a hard time keepin up with him... i liek those...

and thats my adventure. no to go put stuff away....

[Enraged]

oh ya, and GOOD choice on tires! those are the ones i want. how much did you pay? you got all 4? how to they grip :D

[Enraged]

paradox, was that you that mentioned a heat soak issue on supraforums? im thinking maybe thats why my car died, it was REALLY hot (normal on the temp gauge though).

[Enraged]

oh ya.... RAYBESTOS BRAKES CAN LICK MY LEFT FUCKIN NUT! THEY SUCK!

gonna have to buy some stock toyota pads this week....

[Paradox]

hehe sounds like a pretty good trip man.. too bad the supra didnt hold up :(

why'd you go with bosch plat's? i just yanked those outta my car! hehe NGK lasers work way nicer....

also dont get toyota brake pads, get carbon pads ... the hotter they get the better braking power you have. compared to vice versa on the stock pads. well thats what ive heard atleast..

as for heat soaking posting i dunno, i think that was Ryan? ive never had any heating probs, even back when i had the BHG it only ran a tiny bit hotter than usual. ask Ryan he knows that sorta stuff.. hehe

the tires i got are pretty cool as for performance, i dunno if i like the appereance of them as much as the yokohamas, i wasnt sure what the height of them would be like, so i went 235/45/17 same as the yoko's

turns out the Goodrich 235/45 are a decent amount higher.. sorta looks like i have slicks or something on the back now hehe. they dont look too bad, i'll post pics later. i was just expecting the same profile as the yoko's. as for performance umm.. they squeel more when i do a burn out. hahaha. i havent really had a chance to hit any corners at speed yet :(

i only got the back 2 tires replaced, my fronts are fine, and to break the mystery of whether or not the BF's are a harder compound than the yokohama decibels, i would say that the BF's are way harder compound. i can just feel it.

im gonna miss having decibels all around tho.. i loved those tires.. they just wear out WAY too fast

anyways, i think im done with my 5 page post.. enjoy :)

[NashMan]

hehehhe well frist of all i chould not lip emm and if i did i whould have to use hammer and that is kinda not pretty whe you start banginf stuff as for blow off i think i am in the clear caue si not pushign that much psi



as for you not useing bov heheh that funny you not doing any harm but may get crap in your thottle body but eh what ever what ever




as for you car dieing not starting up as change the plugs and such hummm i don't think that is the pron in any way i think it is some were esle

cheak these things

1 plug wire's stock boots over tiem seam to separt akak bost plus and fall's apart plus just don't die (hint add spark plug greash to your plugs to get better conntion and stop carowtion

2heat soak is this when you have air in you system and you have air pocket right then the heat has no ware to go so it goe sinot your block baskilg

how you know you have heat soak is after you shut off your car got to try to start it again and it will not start


now if this was ever to happen to you what you have to is pop the rad cap off as fast as you can (watch that you don't burn you self use big towle, grab house stock inot you rad and turnnt he sucher over it should start and let it cool down

caues if you let it stay hot like that you hg will turn into bhg in no time or just weaken it

aka toby you should really fix you temp gauge


there are lots of things that cna go wroung when you car doe snot start liek that


aka just look for these 3 thihgs when it doe sit again and yoy fidn the prob area (fule/spark/air)

any way hope you had fun on your camping trip i knwo whould have


as for pads get teht nosie speakle junk on put em on you pads and stuff



teh best pads i ever ran are the trd ones there the bomb but cost a bit but one good thing thou is you will have one thing made by trd on your car

[Paradox]

BF pics.... not too sure how much you can tell from the pics, but the profile definetaly isnt the same as the yokohamas, check my post on supraforums .....

http://www.supraforums.com/showthread.php?s=&postid=500648&t=727#post500648

[Paradox]

ohh and the price was $508, Enraged. just for the back two
im guessing the 16" price for you would be dramatically cheaper.
ive heard some great things about these tires ....

my car oversteers easier now.. gonna take some gettin' used to

[Enraged]

cool... thats the "old"style, i like the look of new 2nd generation KDWs: http://www.tirerack.com/tires/images/bfg/bfg_gforce_kdw2.jpg

[Paradox]

theres generations of tires?

geezus christ.. ahh well, im happy with the tires cept for the profile.

[Paradox]

hehe sweet, i just hit "senior member" didnt know that happened at 500 whore posts....

[Enraged]

check this out, this is what i am thinkin for a cheap FMIC....

http://mkiv.virtual.net.nz/articles/kevinter.htm

add some fiberglass ducting maybe...

as for the brake pads.... its not the skweel or anything, they are CRAP! goin down the highway at 90/110 around there, and put on the brakes for a stoplight, and i get a vibration/weird feeling. its really hard to describe, but im pretty sure its the pads glazing over.... im goin to take the wheels off and check the pad life with the new slotted rotors. stock toyota pads are $81, in stock. so ill look for a different alternative.

[Paradox]

carbon carbon carbon!

stockers are garbage :)


3 MKIV stockers welded together.. ghetto sweetness

bet it'd flow nice

[Enraged]

im thinkin 2..... at US$100 each, plus $100-$200 or so for making endtanks, and having them welded....

i want porterfield pads.... but they are soooo expensive.... hey paradox, you goin to get in on that brake group buy on supraforums, the sticky at the top?

[Paradox]

Originally posted by Enraged
im thinkin 2..... at US$100 each, plus $100-$200 or so for making endtanks, and having them welded....

i want porterfield pads.... but they are soooo expensive.... hey paradox, you goin to get in on that brake group buy on supraforums, the sticky at the top?

yeah two would be sweet, way better than a stocker MK3 I/C.... mounting would be a bitch tho.. have to custom mount ALL of it. i had enough probs with the spearco which was built for the damn MK3

the brake group buy is too pricey man.... i wish

i gotta stop spending money on my engine/drivetrain/brakes/wheels/etc and get the interior done!

[NashMan]

i might buy boost conrtoler today but don't know


but as for that getto inter cooler i wounder if ti whould flow that good


lower half ic i gona start to make to day an di got suprize for you all comeing up muahhahahahhahahha toby you going to hate me hehehe




any way i got seat blet pads up for sale if any onf you guys want em i get rid of em cheap or free or pack of smokes cough cough hork got t quit smokeing

[Paradox]

what color are the seat belt pads?

[Enraged]

what are you doing and why would i hate you? you goin to go to the duncan autox on thursday?

[NashMan]

ehehehhe you will see muahahahahahahah



and yae sure i be att eh autox i allways am


now we got to see if dave will go

[Paradox]

bring your belt pads! i might want em :D

[NashMan]

cool will do. ps are you going to bring your lab top as well so we can like desigh the web page ect

and where should we meet and do this web page thing, same place as last time or some place we can sit down and stuff like timhorts in langford or some where els


any way vote away where we should meet

[Paradox]

same place as before... layouts pretty simple idea to get covered, most of it you can just tell me online

plus im not even sure i can go this week, i have to go to parksville on thursday (again) my moms just outta the hospital and staying at grandparents.. i'm needed up there

anyways hopefully i can stick around for awhile, toby u coming?

[NashMan]

do bear's shit in the woods of course he will go


we may have new comer to this bord i did not chatch his name but he will find his way

[Enraged]

yup ill go... i guess that means i should wash my car hehe

[NashMan]

if it rains my car will be wash i never wash the thing well or alest i don't try to wash it maybe i will hire some one to do it hehehe


ps i got oen other thing for you mury that you will die over but i will not tell and show you tell we meet up at the supra meet hehehe


but same bat time same bat channle 6 pm or should we make it 5.30

[Jarrett_88]

hey, nashman how long have you been into supras? Oh thanks for the tip on the parts i never thought of phoning them. Iam thinking of going for the a new exaust and cool air intake any suggestions

[Enraged]

intake: used K&N FIPK if you can find one, check out www.supraforums.com forsale section. or you could get the universal kit from www.suprasport.com. or... another option is buy an adapter like this http://www.supra-sport.com/images/Adapters.jpg for US$15, and get a K&N from Lordco or the like, email toysport@supra-sport.com if you want one of those.

exhaust, go to the same guy nashman went to, $300 for piping i think, plus the cost of the muffler (you can get a magnaflow 3" stainless for around $200). as for downpipe, if your interested, i can get a one-peice (no turbo elbow) for US$300... over $100 less than retail, polished stainless steel....

im asumming you have an 88? what color/options/condition etc?

[Enraged]

damnit... no autox this week....

[Jarrett_88]

yaah i have a 88 turbo targa, its red i havent done really anything to it except a bomex wide mounth front buper, msr 16 inch 245 wheels and a pro circuit gt spoiler, i rebuilt it after it went into a ditch, the guy who put it in the ditch left it in his front yard, it was broken a some water got in, I bought it for like 2000 and i have just finsihed sanding and painting the floor pans and cleaning everything to mint and going through all the electronics ect, but its almost street legal, ahah

[Jarrett_88]

hey where abouts in saanichton do you live, i live like right in brentwood bay, i never see any other supras out here

[Enraged]

YOU BASTARD!!!! thats the one i was goin to buy!!!!

haha good find though. i had $2500 cash i was goin to give him, but i was workin all week and he sold it before the weekend.

[Enraged]

i live off stellys x rd. i work at the Co-op.

[Enraged]

as for supras, there is a few around. one dark blue NA driven by an old couple, a burgandy one identicle to mine owned by a guy that works by pharmasave by the PI, and a silver NA driven by a highschool kid i think. mines the only turbo ive seen around here. when are you putting yours on the road?

[Jarrett_88]

hey, yeah i have seen your car, parked out side the co op in keating, i always walk buy i take a look, in the next few weeks ill have mine on the road with hopefully a new paintjob, Did you you go to stellies?

[Jarrett_88]

yeah, live right beside bayside middle school, i work at the thrifties in saanichton

[Jarrett_88]

oh yeah and about the guy i bought the car off of i think you glad you didn't cause this car me and my dad have put in probably like over 1000 hours to get it this far, right when a started i almost gave casue it was so scary what the guy did, haaha hes fuckin mental, like the "custom shit" he did

[Paradox]

sweet new supra owner on the forum?

welcome dude! :)


christ, i just got back from parksville.... tons of freakin' cops everywhere between malahat and skidney. i saw like 5 people pulled over.

and damnit! i had my BOV set like perfectly, it sounded so dope when i drove up, then i thought id tweak it a little more and its al buggered now :(

[Enraged]

lol

once you have it on the road, your welcome to join our little club hehe the site is http://www.realityexit.org/VIS

[fuzebox]

Just installed my porsche 911 turbo BOV... I'm a big disappointed :p

1) Same spoolup, same performance, etc... this means my stocker wasn't leaking, as I originally thought

2) Boring rush of air sound... I read in a few places that because the valve had a shorter piston or something, it would snap open with a sharp whistle. Maybe I'm not running enough boost for this.

It is a bit louder than the stocker and doesn't flutter though... A decent repair for $65 :p

[Enraged]

think of it this way.... i bought my car, totally stock, for $7000. so for $5000, you can fix it, have a brand new paint job, rims, etc.... i would have loved a project car like that....

[Paradox]

fuzebox, u shoulda gone for the HKS SSQ :)

sounds so nice compared to the owl sound of the porsche BOV's and others..

too bad the price is like 10x as much
neways good luck with ur new supra dude, keep it clean and fast! :)

[fuzebox]

Originally posted by Paradox
fuzebox, u shoulda gone for the HKS SSQ :)

sounds so nice compared to the owl sound of the porsche BOV's and others..

too bad the price is like 10x as much
neways good luck with ur new supra dude, keep it clean and fast! :)

No hoot here... I think that's a myth :P Basically it's just a low-pitched woosh, you can easily hear it near the car...

And yes, maybe in a few months I'll buy the HKS unit, probably the old-style ones off Ebay or something.