100% AFE

I might go with the Airaid cai and the AFE bladerunner. Not sure the AFE cai is worth like 150 more.

ebay baby!

modded a new ebrake cable into the mail... hopefully i'll get a rear view mirror soon too :p

Not really a fan of ebay for filters or anything related with it.

cleaned out my car, probably -10lbs weight reduction

Been helping the room mate work on his isuzu and its the most confusing pos. The wastegate has been acting up, factory boost controller took a shit and the issue of the car wanting to run whichever boost it wants too. Running the controller how the diagram tells us to, it creates a vacuum leak inside of the controller giving us 8psi vacuum and is only gives us about 4psi of boost at 7000rpm. We gave the controller direct vacuum going into the controller(from the intake), than onto the wastegate but it dosnt give us boost like it should. It'll be a slooowww creep. We flipped it and hooked it backwards and it leaks. Therefor, we ran the wastegate to a vacuum fitting going directly the intake pipe (by the air filter) and it gave us 22psi of INSTANT boost and wheelspin, but hit fuel cut and the engine shut down. We put the controller inline with the intake and still 22psi. Stumbling with this mess all night and still not getting anywhere we gave up. You'd think buying a proper controller would be a sinch of ease. If it was my car, I'd be building myself up another homemade MBC instead of this shitty blue turbo XS which I think is fubard

modded some camshafts for cores into the mail for me... going out to colt cams in vancouver for some regrindeage :D

Modded some new housings

http://gallery.tchleung.com/albums/T...4/DSC00150.jpg

what's happening with the old housings?

Re-amemiya front reinforced sway bar mounts / stabalizer, and racing beat rear sway bar installed.
Waiting on coilovers and front sway bar still :@

New toy to play with. Now only if I had something that could spool it :rolleyes:
http://i21.photobucket.com/albums/b2...e_rs/turbo.jpg
http://i21.photobucket.com/albums/b2..._rs/turbo2.jpg

sparco steering wheel - done
NRG quick release and short hub - done
Origin Lab wide front fenders - done

upnext, start turbo lines

al!

i'm trading a vehicle inventory system coded by myself for a chevy 350 block and a 700r4. i'll have some pics up when i get it :)

Modded a Diablosport tuner and AFE cai onto the Dadge.
Confirmation by the ass dyno says good purchases. The AFE intake is fuckin huge. Goes from a 6" inlet on the filter side to the 4" on the turbo.

Alarm into the truck :D

So with the AFE intake, Diablosport tuner, factory exhaust minus cat and muff and a felpro muff added I am getting 17 mpg around town watching the black pour out, hahhhahahah. If someone is tailgating I press the brake and gas and give them some diesel.

Racing beat front sway bar, Tien type flex coilovers

now need a alignment, and roll fenders.

Modded my bike from the lower mainland into my garage. Was a cold ride!

Got myself a Truck for the upcoming season. F150, reg cab and a buddy gave me a 6" suspension lift kit to go with it.

Head Unit ino the truck...older Rockford Mp3 :D

Threw in a K&N today, stock filter looked pretty disgusting.
Oh, and ordered a set of BBK springs.

Took the front end apart today, dropped in some new rotors, pads, cleaned up the wiring, bolted the intake back together, bled the brakes and went for my first drive. Gave the 4x a good test in a field and I'm satisfied. Now time to get that lift in, and pick up some new tires.

had to fix that for you

:buttrock: Something like that. Bought it for the bush and that is what it will be used for.

Installed my BBK springs tonight, definitely a better stance now!