[fliptuner]

Also, touched up the paint chips.

Gonna need the song here......

[RevYouUp]

started sanding my spoiler for primer and paint :)

http://i38.tinypic.com/rm4jyq.jpg

[smoothie.]

http://image.corvettefever.com/f/35211075+w750+st0/corp_0801_06_z+2004_chevrolet_corvette_z06+gauge_c luster.jpg

:troll:

edit: NVM you win.. not a z06 :okay:

http://0.tqn.com/d/cars/1/0/s/7/1/09zr1_ip.jpg

[underscore]

made a new wiring harness for my wideband, colourmatched and everything.

[lowda9]

did oil change with rotella t6 5w40. hopefully the engine will like this oil

[BBMme]

Cleaned my interior
Posted via RS Mobile

[RecklessNS]

Gave it a dirty look, Replaced PCV value, then did a quick oil change on the jeep and finally put my Treo sticker on.

[jtrinh]

Would have rather washed my dishes at home than these ones.
http://i18.photobucket.com/albums/b106/jtrinh/D26BCC71-8801-4A7B-9386-B80F869844E6-1008-0000004E179CA738_zps53598c91.jpg

Was worth it though. Gleaming!
http://i18.photobucket.com/albums/b106/jtrinh/D9A45CE1-9D7F-4E2A-8BC6-CEF27A0EE812-1008-0000004DFD4A6197_zpsc6964625.jpg

[AVS_Racing]

^^lol told you multi spoke would be a bitch to clean

[artmotion]

Would have rather washed my dishes at home than these ones.
http://i18.photobucket.com/albums/b106/jtrinh/D26BCC71-8801-4A7B-9386-B80F869844E6-1008-0000004E179CA738_zps53598c91.jpg

Was worth it though. Gleaming!
http://i18.photobucket.com/albums/b106/jtrinh/D9A45CE1-9D7F-4E2A-8BC6-CEF27A0EE812-1008-0000004DFD4A6197_zpsc6964625.jpg

If you don't already have some, get yourself a few good wheel brushes. Totally worth it!

[knight604]

^ where to buy good soft ones?

[artmotion]

^ where to buy good soft ones?

I got mine at Autowerkes Exclusives but it's kinda far. I think they have a website as well if you want to order online. I got a brush that's kinda like this for my lug nuts and valve stems.
http://static.veracart.com/gloss002/item_images/set_1/272/lg.jpg
Best brush ever!

[AVS_Racing]

^^ i got those from Ken too. finally I can clean my rivets and gap between face and lip. Find him. sometimes he has jobs in lower mainland and arrange a pick up.

[fliptuner]

Ugly wheels, hard to clean.

When are you selling them? :troll:

Try this style brush: http://www.boatmania.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/c/o/cone-wheel-rim-cleaning-brush_3250028C_3.jpg

I don't want to buy wheels with caked on brake dust :fullofwin:

[BrRsn]

fixed my dads car and ordered up new rubber for my rims .. that have been sitting in their boxes since 2011 :facepalm:

[westopher]

Picked it up from the paint shop, lip is now colour matched (I use that term loosely) and all the damage, dings and hood chips are fixed.
http://i99.photobucket.com/albums/l308/westopher2006/5FA762D6-E02A-4EAE-B153-8778C5B3C63B-10883-00000740ED81488C_zps1ade27d5.jpg
Posted via RS Mobile

[underscore]

Vibrant couplers showed up :fuckyea:

$180 later :rukidding:

[knight604]

That's where i got mine but they were a bit rough on my rims

[kchan]

installed my new headers + sportcat
getting new tune tomorrow

and showing off my buttcrack :lawl:

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/603615_10151346468167653_1287504304_n.jpg

[imp_squared]

^ better than fisting, it's called heading!

[kchan]

^ better than fisting, it's called heading!

everytime i work on my car

i always wonder how the british handbuilt this to be so tight.. are they midgets or gnomes or something..

sharp edges, really tight to reach spots for every screws :rukidding:

[tofu1413]

bought it and drove it home today.





:troll:

[ApePee2]

took the hardtop off :)
Posted via RS Mobile

[ForeverYours]

Installed a roof spoiler
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/920715_324610804333935_605266483_o.jpg


and for the upcoming weekend...
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/919175_324610861000596_1007896497_o.jpg

coilovers for my car are like non-existent I can barely find any manufacturers that make them :okay:

[GDChoi]

bought it and drove it home today.





:troll:

what did you buy now alex

[nabs]

tranny flush and fill, tires balanced, wash, vaccuum, cleaned rims. TY Jaemc.

[mk1freak]

installed my new headers + sportcat
getting new tune tomorrow

and showing off my buttcrack :lawl:

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/603615_10151346468167653_1287504304_n.jpg


I've seen it in person...... the ass looks good:ifyouknow:

[see.lai]

changed primary o2 sensor.
lets see if my gas mileage gets better or not..
if not... gonna do it right and bring out the scan tool next time :whistle:

[CumDumpster]

installed a vibrant cat back exhaust on my Fa5.

[westopher]

Thanked you for your name. I lol'd

[knight604]

New head lights and new tail lights.

:toot:

Big thanks to TQ.

[fliptuner]

Took it for a good, hard drive to and from tonight's meet....

That's what it's all about in the end, right, enjoying your car?

[Limitless]

Spent like 8 hours with some friends adjusting shit today with the kit, figuring out how to mount the plate, raising my coils :( drilling holes.. Not the most flattering picture taken at 2am at night... Super messy garage and can't really see shit in the picture lol
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash4/465283_10152754058635582_1640598401_o.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc1/902596_10152754144910582_709027299_o.jpg

[melloman]

Threw in some yellow Eurolite 9005's to replace those ugly stock "pasty-white" DRL bulbs. :D

[finbar]

Began chasing down hard hot start symptom by addressing vapour lock.
Pipe insulation on fuel line from fuel pump (engine mount) to carb.
:whistle:

[ALEX1988]

washed it.
http://www.vanpeople.com/space/attachment/201304/26/1594_136693917209e0.png

[suprat88h]

Woke the supra up from hibernation :D

Toyota Supra turbo cold start - YouTube

[jackp0t]

cleaned up the garage
http://i1178.photobucket.com/albums/x374/jackp0t_/4ED397DA-B554-4AA9-83CF-A43B3E724256-52486-0000134412E91B18.jpg (http://s1178.photobucket.com/user/jackp0t_/media/4ED397DA-B554-4AA9-83CF-A43B3E724256-52486-0000134412E91B18.jpg.html)

and retrofit time :fullofwin:
http://i1178.photobucket.com/albums/x374/jackp0t_/B5CF3879-F8CA-4C34-9CBE-843EB5C1995D-52486-000013440A027B44.jpg (http://s1178.photobucket.com/user/jackp0t_/media/B5CF3879-F8CA-4C34-9CBE-843EB5C1995D-52486-000013440A027B44.jpg.html)

[underscore]

Woke the supra up from hibernation :D

Toyota Supra turbo cold start - YouTube (http://youtu.be/Jgy2bkq88to)

As soon as I heard that I thought of this (2m 18s)

He's angry! - Youtube

[TurboFC3S]

Replaced silicone vibrant elbow with a aluminum one on the turbo :)

http://distilleryimage5.s3.amazonaws.com/4a2a4266ae1e11e2a82b22000a9f1408_7.jpg

[underscore]

Got sick of waiting for Kelowna Toyota and got a replacement ebrake shoe pin from Lordco, got the rear brakes all back together but now my old brake lines are being a bitch.

Also started fiddling around with couplers to try and sort out a new intake.

[Limitless]

Holy shit spent the last two days living in my garage lol. Just finished raising all coils a bit, and fiddled around with the front bumper/fender liner so now everything fits :) Finished installing sideskirts as well, rear bumper is going in tomorrow along with the rear fog and reverse camera :)

Kit is still super dusty from sitting at the body shop for a few days after paint, car was just claybarred, polished and waxed so it's super shiny lol. Need to rinse off the dust on the kit when I'm done, right now it looks kinda funky

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash4/459226_10152756459625582_2081598986_o.jpg

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc1/904502_10152756459605582_1083028762_o.jpg


I HATE my driveway... always never getting traction on one of the rear wheels =_=
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc1/920302_10152756459575582_133462230_o.jpg

And barely even able to make it out
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash4/478056_10152756460070582_1553414998_o.jpg

But so happy it's almost done :) front has been bolted, clipped and ziptied on. Sideskirts have like 8 bolts and 2 screws along with 3m tape so hopefully nothing will go flying off my car anymore.

[TRD Rs200]

http://images.craigslist.org/3F63Nb3H35N45F15J6d4q9f54724f4a0511e2.jpg

took out this intake and replaced with oem... then polished foggy headlights on new car

[snails]

i got it towed to my buddies shop! haha

alright, driving back from chilliwack to langley yesterday and my car shut off on the hwy. when i would try to start it the main relay would make clicking sounds and the starter motor would crank but that was it, couldnt tell if fuel pump was priming because cars driving by were so loud.

i assumed main relay was shot so i had a friend drop a new one off to the side of the road only for it to make the same noise *video under*... what else could it be and why would the relay make that sound?

20130425_191936_zps15f234b0.mp4 Video by langleychrysler | Photobucket (http://s1154.photobucket.com/user/langleychrysler/media/20130425_191936_zps15f234b0.mp4.html)

and a pic of my friends instagram
http://i1154.photobucket.com/albums/p531/langleychrysler/Screenshot_2013-04-26-07-57-52-1_zps24876d82.png?t=1366988916

[Indyjones]

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash4/478056_10152756460070582_1553414998_o.jpg
.

Looks great :cool:, but how on Earth will you get over speedbumps with those sideskirts sitting sooooooo low.

[mk1freak]

Looks great :cool:, but how on Earth will you get over speedbumps with those sideskirts sitting sooooooo low.

lowlyfers like us don't do speedbumps. :badpokerface:

i got it towed to my buddies shop! haha



and a pic of my friends instagram
http://i1154.photobucket.com/albums/p531/langleychrysler/Screenshot_2013-04-26-07-57-52-1_zps24876d82.png?t=1366988916

ass out because bros :lawl:

[asr]

Holy shit spent the last two days living in my garage lol. Just finished raising all coils a bit, and fiddled around with the front bumper/fender liner so now everything fits :) Finished installing sideskirts as well, rear bumper is going in tomorrow along with the rear fog and reverse camera :)

Kit is still super dusty from sitting at the body shop for a few days after paint, car was just claybarred, polished and waxed so it's super shiny lol. Need to rinse off the dust on the kit when I'm done, right now it looks kinda funky

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash4/459226_10152756459625582_2081598986_o.jpg

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc1/904502_10152756459605582_1083028762_o.jpg


I HATE my driveway... always never getting traction on one of the rear wheels =_=
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc1/920302_10152756459575582_133462230_o.jpg

And barely even able to make it out
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash4/478056_10152756460070582_1553414998_o.jpg

But so happy it's almost done :) front has been bolted, clipped and ziptied on. Sideskirts have like 8 bolts and 2 screws along with 3m tape so hopefully nothing will go flying off my car anymore.

Kit looks good. The skirts might scratch some bumps.

[Limitless]

Looks great :cool:, but how on Earth will you get over speedbumps with those sideskirts sitting sooooooo low.




Kit looks good. The skirts might scratch some bumps.

The skirts in that pic look low because my driveway is at a retarded angle lool. I'm going to see how it is and if I do end up not clearing some stuff I'm going to raise it again, don't like the thought of scraping fiberglass :okay:

[Grim]

if you can survive the mcd near 49th n vic??
ull be fine :troll:

[FatalCloud]

^? there's no mcdonalds at 49th and vic.

[J.C]

you mean 41st and vic?

[asr]

The skirts in that pic look low because my driveway is at a retarded angle lool. I'm going to see how it is and if I do end up not clearing some stuff I'm going to raise it again, don't like the thought of scraping fiberglass :okay:
If you car is fine at Lansdowne Center, then the height is ok.

[Limitless]

Haven't been to that mcd before, but my exhaust couldn't clear the tall bumps at lansdowne with my old kit/height. The middle was fine everywhere else though, either way if I go to Lansdowne there's only one entrance I'll go in from with no speedbumps haha

[!e.lo_]

http://i13.photobucket.com/albums/a267/aznebonix/IMG_2888_zpsfd1f4965.jpg

[nabs]

if you can survive the mcd near Kingsway and Victoria??
ull be a god amongst men :accepted:

fixed.

[Santofu]

^ You mean Kingsway and Victoria? :suspicious:

[satek]

Oil change, gtx and k&n filter

[E-40six]

picked up 2 hockey sticks, 2 5'x3' canucks flags and some 1"x1" lumber and got myself ready for this years playoff run haha

http://i301.photobucket.com/albums/nn57/ITRalex/photo9_zpsefddaadc.jpg (http://s301.photobucket.com/user/ITRalex/media/photo9_zpsefddaadc.jpg.html)

[BABU]

http://i13.photobucket.com/albums/a267/aznebonix/IMG_2888_zpsfd1f4965.jpg

More pics !!!!

[Nicotine]

saoo shinny
http://i105.photobucket.com/albums/m205/nicolaspal/B5643571-82A4-472D-9AAB-3FD7E4671FBB-5255-0000069A1BE29D6A_zps4485f2ac.jpg (http://s105.photobucket.com/user/nicolaspal/media/B5643571-82A4-472D-9AAB-3FD7E4671FBB-5255-0000069A1BE29D6A_zps4485f2ac.jpg.html)

[imp_squared]

some of us are having trouble locating mcd in the vancity area. lol

[!e.lo_]

More pics !!!!

Check my build thread
Posted via RS Mobile

[mk1freak]

Haven't been to that mcd before, but my exhaust couldn't clear the tall bumps at lansdowne with my old kit/height. The middle was fine everywhere else though, either way if I go to Lansdowne there's only one entrance I'll go in from with no speedbumps haha

haha its the entrance of kwantlen closest to the old zellers? I know that entrance oh so well :fullofwin: quick turn right and all around the speedbumps :accepted:

picked up 2 hockey sticks, 2 5'x3' canucks flags and some 1"x1" lumber and got myself ready for this years playoff run haha

http://i301.photobucket.com/albums/nn57/ITRalex/photo9_zpsefddaadc.jpg (http://s301.photobucket.com/user/ITRalex/media/photo9_zpsefddaadc.jpg.html)

OMG THAT WAS YOU LAST YEAR SAME SET UP YES? :fuckyea:

[E-40six]

OMG THAT WAS YOU LAST YEAR SAME SET UP YES? :fuckyea:


lol, nope I didn't have this setup last year, this is the first time I got the epicness

[Akinari]

Rotated my tires :thumbs: Still tons of tread left, doesn't give me an excuse to change wheels :okay:

[dvdjels]

rsb in last week

Ground Controls going in today :D

[Mr.C]

Summer shoes are on!

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/15232_10152801401635301_1743589041_n.jpg

[UnName]

Did my power steering fluid.
Posted via RS Mobile

[tipy]

Did my power steering fluid.
Posted via RS Mobile

can you please tell how you do it?
i will need to do mine soon

[unkicrackie]

Got some fenders rolled today. :)

http://img833.imageshack.us/img833/135/imagetqu.jpg
http://img259.imageshack.us/img259/3610/imagezil.jpg

[BABU]

How much you paid for the tool ? Good website to get it from ?

[fliptuner]

Directly from Eastwood, it's $250 - 10% with email signup

[Noran]

Oil change, changed both fog lights

[unkicrackie]

How much you paid for the tool ? Good website to get it from ?

My friend ended up paying $300 for the fender roller because he ordered it through Snap-On...
Posted via RS Mobile

[dink]

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/945893_10151574103173522_444347886_n.jpg

new steering wheel

[ForeverYours]

Jacked up car, removed wheels, removed rear struts
Putting on new coilovers, new rotors/ceramic pads, and cleaning/painting the calipers tomorrow... it's going to be MAAAAAAD

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash4/468208_327070754087940_1597444521_o.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash4/478047_327070757421273_1304146617_o.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-frc1/302765_327069624088053_1996376826_n.jpg

[Nicotine]

Droped her off for new Timingbelt + waterpump and new intake.

[christiankirana]

"it's going to be MAAAAAAD" Mightymodss

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash4/468208_327070754087940_1597444521_o.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash4/478047_327070757421273_1304146617_o.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-frc1/302765_327069624088053_1996376826_n.jpg[/QUOTE]

[kakucaekz]

Finally got off my ass and cut my headlight shrouds to fit over the projectors. I had them on before, but that's when the linkage arms were disconnected and I could slide them on without hitting anything.

Before:

http://i282.photobucket.com/albums/kk262/RDazr/Toyota%20MR2/still1_zpsc47b224a.jpg (http://s282.photobucket.com/user/RDazr/media/Toyota%20MR2/still1_zpsc47b224a.jpg.html)

Bad picture, kinda, it's a still from a video lol.

Then I went to cutting the shrouds. Not the prettiest job, but nobody really sees them, so it's ok :D

http://i282.photobucket.com/albums/kk262/RDazr/Toyota%20MR2/IMG_20130501_160009_zps0c249f20.jpg (http://s282.photobucket.com/user/RDazr/media/Toyota%20MR2/IMG_20130501_160009_zps0c249f20.jpg.html)

http://i282.photobucket.com/albums/kk262/RDazr/Toyota%20MR2/IMG_20130501_161413_zps8f9987d3.jpg (http://s282.photobucket.com/user/RDazr/media/Toyota%20MR2/IMG_20130501_161413_zps8f9987d3.jpg.html)

And put them back on!

http://i282.photobucket.com/albums/kk262/RDazr/Toyota%20MR2/IMG_20130501_162204_zps358c4094.jpg (http://s282.photobucket.com/user/RDazr/media/Toyota%20MR2/IMG_20130501_162204_zps358c4094.jpg.html)

Pedobear returns!

After, I gave the car a good wash, it was filthy and had cherry blossoms stuck in weird places.

http://i282.photobucket.com/albums/kk262/RDazr/Toyota%20MR2/IMG_20130501_171827_zps37c704d0.jpg (http://s282.photobucket.com/user/RDazr/media/Toyota%20MR2/IMG_20130501_171827_zps37c704d0.jpg.html)

[jackp0t]

got my retro aswell
http://i1178.photobucket.com/albums/x374/jackp0t_/1F243145-F3DC-41D8-A625-9315222C68CC-5639-0000013055A1D59C.jpg (http://s1178.photobucket.com/user/jackp0t_/media/1F243145-F3DC-41D8-A625-9315222C68CC-5639-0000013055A1D59C.jpg.html)
http://i1178.photobucket.com/albums/x374/jackp0t_/537340FA-1D4B-4263-95B4-2B0879914F4F-5639-0000013088E05DAB.jpg (http://s1178.photobucket.com/user/jackp0t_/media/537340FA-1D4B-4263-95B4-2B0879914F4F-5639-0000013088E05DAB.jpg.html)

different set of lip kit
http://i1178.photobucket.com/albums/x374/jackp0t_/20130501_194909.jpg (http://s1178.photobucket.com/user/jackp0t_/media/20130501_194909.jpg.html)

[Indyjones]

http://i282.photobucket.com/albums/kk262/RDazr/Toyota%20MR2/IMG_20130501_171827_zps37c704d0.jpg (http://s282.photobucket.com/user/RDazr/media/Toyota%20MR2/IMG_20130501_171827_zps37c704d0.jpg.html)
Nice ride! Great cars, MR2s! Too bad Toyota stopped producing them. Mid engine, rear wheel drive...doesn't get better than that :toot:

[ForeverYours]

Jacked up car, removed wheels, removed rear struts
Putting on new coilovers, new rotors/ceramic pads, and cleaning/painting the calipers tomorrow... it's going to be MAAAAAAD

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash4/468208_327070754087940_1597444521_o.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash4/478047_327070757421273_1304146617_o.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-frc1/302765_327069624088053_1996376826_n.jpg

Coilovers and new rotors are in the rears... waiting to do the front soon enough!
Also painted the calipers blue (which you can barely see :troll:)

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc1/902630_328272810634401_1497903371_o.jpg

Sweet jesus DAT ASS :sweetjesus:
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc3/892720_328272843967731_558310547_o.jpg

[mos_skeeto]

Bought a cheapo dash camcorder from London Drugs :)

[Acura604]

Thanks to ASR.

Replaced my superbrightleds.com bulb with ASR's multi LED.

License plate and all interior bulbs replaced.

(ASR bulb on left)

Overall white and brightness increased by about 20%.

http://img259.imageshack.us/img259/6720/1367555269631.jpg
http://img689.imageshack.us/img689/3569/1367555306627.jpg
http://img248.imageshack.us/img248/1757/1367558804562.jpg
Posted via RS Mobile

[ilvtofu]

Cut the bumper and installed some door trim moulding along the bottom edge, moulding was really hard to do but the car is ready to hit the road hopefully tomorrow!
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/944800_10151463894757912_2021146463_n.jpg

[snails]

a day or two late but here it is!

my brakes were warped and scored, and just bad in general, first brake swap since owning the car!

also i sprayed my extra clear bumper/corner lenses from clear, to amber... to even darker amber just to mix it up a little for now!

http://i1154.photobucket.com/albums/p531/langleychrysler/PhotoGrid_1367598966227_zps5b87aff8.jpg?t=13675988 96

[BABU]

^ nice floor jack !

[lilaznviper]

just rolled over 50k km after 5 year
http://i.imgur.com/IyNm31i.jpg

[asr]

^That is low mileage in 5 years.

[underscore]

10k per year is isn't that low, I only do about 10k a year (but my commute is short)

[FI-Z33]

lowered 1" :fuckyea:


hmmmm what's next

[J.C]

shaved the trunk :D
had gotten all my supplies like towels, goo gone, dental floss, hair-dryer, etc
ended up only spending 2 minutes with the hair dryer and pulled off the badges with my fingers with no adhesive left over :fuckyea:

hmm...plastidip the H or wing emblem?

http://i905.photobucket.com/albums/ac258/Jiepo/20130504_181259_zpsb6393d95.jpg (http://s905.photobucket.com/user/Jiepo/media/20130504_181259_zpsb6393d95.jpg.html)

[ForeverYours]

shaved the trunk :D
had gotten all my supplies like towels, goo gone, dental floss, hair-dryer, etc
ended up only spending 2 minutes with the hair dryer and pulled off the badges with my fingers with no adhesive left over :fuckyea:

hmm...plastidip the H or wing emblem?


Wing emblem, do it :accepted:

[CP.AR]

Changed the rear brakes on my car. Took some time to figure out how to compress/retract the piston.

turns out it's an adjustable screw from the back you turn with a Hex/Allen key...
And by doing that I also readjusted the Handbrake to engage within the first 5 clicks or so.

[melloman]

Threw the coils in.
Did some more front fender work.

http://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/935551_10151403951583309_1828057366_n.jpg

[fliptuner]

More fender work = you can drop it more now... :lawl:

[dared3vil0]

Detailed it inside and out, cleaned the car out. Picking up the new truck Wednesday or Thursday. Going to be sad to see this one go. :okay:

[dvdjels]

installed camber bolts

waiting for alignment..nervous to be driving from richmond to chiliwack with alignment off...

[melloman]

^^ Realistically unless you screwed with it tons, I've learned it doesn't make a huge difference.

Camber won't kill you quick, toe will. As long as you don't have toe, you should be good :thumbsup:

[AW607]

Got my O2 Sensor and cat replaced, reset codes and drove it around for a few hours.. aircared and passed. Feels good man :joy:

[BBMme]

took a nail out from my rear right wheel.......

[underscore]

old stickers removed, "my VTEC goes BWAHHHHHH" sticker added, custom 4g shifter decided to be bitchy :(

[cho]

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/198890_10151466373387515_468209925_n.jpg

put skirts on!

[lowda9]

installed a pro sport evo series boost gauge. I really like the digital look and its easier for me to read while driving than a traditional style gauge with the needle.

[!e.lo_]

oil, coolant, front brakes.
http://i13.photobucket.com/albums/a267/aznebonix/IMG_2971_zps237da165.jpg
http://i13.photobucket.com/albums/a267/aznebonix/IMG_2972_zps578e5370.jpg
oops
http://i13.photobucket.com/albums/a267/aznebonix/IMG_2974_zps1a751b9d.jpg

[TjAlmeida]

De-badged the rest of the truck. The cummins and Mega Cab emblems. Much better in my opinion.

http://i262.photobucket.com/albums/ii107/Ridge_Raiders/20130508_203025_zps5b7aac97.jpg (http://s262.photobucket.com/user/Ridge_Raiders/media/20130508_203025_zps5b7aac97.jpg.html)

[jing]

First wash of 2013 lulz
Posted via RS Mobile

[Acura604]

Replaced the TL-S and Civic cabin air filters. Used FRAM freshbreeze from cdn tire $22 after tax with coupon! Dealer charges $32 plus tax for OEM.

Civic filter was never changed from new to 115000km. Was filthy (2nd pic)

Never let a dealer do this...they will charge $100 to do a 5 min job! ...but I'd love to give a f*ck you to the acura designers who made changing the TL filter so much more annoying than any other Honda.

TL-S filter after about 30000km
http://img534.imageshack.us/img534/1782/1368074043258.jpg

Civic filter after over 100000km
http://img819.imageshack.us/img819/3649/1368074114694.jpg

Both old filters side by side
http://img38.imageshack.us/img38/9360/1368074175485.jpg

Fram!
http://img834.imageshack.us/img834/5249/1368074248594.jpg


NEXT...inspect engine air filter on both.

[dared3vil0]

EDIT: Woops, thought this was latest pic of yo whip... Sorry...

[jackp0t]

installed quick release
http://i1178.photobucket.com/albums/x374/jackp0t_/20130503_180421.jpg (http://s1178.photobucket.com/user/jackp0t_/media/20130503_180421.jpg.html)
http://i1178.photobucket.com/albums/x374/jackp0t_/20130508_190631.jpg (http://s1178.photobucket.com/user/jackp0t_/media/20130508_190631.jpg.html)

[Kidnapman]

Very sick lude. S2k seats make it that much better.

[Indyjones]

http://i1178.photobucket.com/albums/x374/jackp0t_/20130508_190631.jpg

That's cool! Now you can take it with you when you leave the car.
Or do this... :toot:

http://postmediadrivingdotca.files.wordpress.com/2013/04/wheelless_driving2.jpg?w=480

[Kaolinite]

took my car to Sen Sha Ya car wash with my unpainted black poly lip.. and the chemicals they spray on at the beginning ate all the black away so now my lip is blueish/white =[.. time to spray my lip black

[ApePee2]

Secured my hardtop :)

Drilled a hole through my rear latch so a padlock can be fitted over the latch, preventing it from moving forward (which unlocks it).

Drilling through hardened steel is PITA.

[Grim]

Paid a visit to Gerard/Kevin at SerialNine.

Wont have my baby back till saturday :(

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash3/922430_10152870352640565_1727486565_o.jpg
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/466188_10152870353125565_1180070142_o.jpg

[westopher]

Grim is your car the is(250/350) with work wheels? If so I like where this is going.

[Grim]

is250 rwd :P
work gt-v!!

http://i452.photobucket.com/albums/qq249/EJ20/vk1.jpg
something like that (except not planning to get a lip/body kit).. my wald spoiler is collecting dust until i can fork out the funds to get it molded

[westopher]

Fuck yeah dude. You gonna go super low or practical low? I'm really stoked to see your setup.

[dared3vil0]

is250 rwd :P
work gt-v!!

http://i452.photobucket.com/albums/qq249/EJ20/vk1.jpg
something like that (except not planning to get a lip/body kit).. my wald spoiler is collecting dust until i can fork out the funds to get it molded

Though i'm not usually a fan of black wheels, i really think they'd make the car that much better. It already looks awesome though. :fuckyea:

[Grim]

Fuck yeah dude. You gonna go super low or practical low? I'm really stoked to see your setup.

practical low. sucks how i have to use the car for work. and i clock maybe 100-150km per day doing so... so DD > stance...:rukidding:
maybe until i get another car i can commute with

Though i'm not usually a fan of black wheels, i really think they'd make the car that much better. It already looks awesome though. :fuckyea:
its gunmetal :smug:
but maybe later down the road i might get it redone to SSR's super black chrome color :D

[Roach]

Detailed ext/int

http://i148.photobucket.com/albums/s6/kkullar/S2000/Exterior%20Detail/IMG_1818_zps7f0c8571.jpg

http://i148.photobucket.com/albums/s6/kkullar/S2000/Exterior%20Detail/IMG_1864_zps9de3beb4.jpg

http://i148.photobucket.com/albums/s6/kkullar/S2000/Exterior%20Detail/IMG_1871_zpsce23f57d.jpg

http://i148.photobucket.com/albums/s6/kkullar/S2000/Interior%20Detail/IMG_1900_zpsbb4ba7f9.jpg

http://i148.photobucket.com/albums/s6/kkullar/S2000/Interior%20Detail/IMG_1915_zpsa1484b7b.jpg

Kev

[CP.AR]

^ what'd you use for the leather?

[jtrinh]

is250 rwd :P
work gt-v!!

http://i452.photobucket.com/albums/qq249/EJ20/vk1.jpg
something like that (except not planning to get a lip/body kit).. my wald spoiler is collecting dust until i can fork out the funds to get it molded

You mean Volk's, right? haha. Better direction than the Varrstoens.

[Energy]

Detailed ext/int

http://i148.photobucket.com/albums/s6/kkullar/S2000/Exterior%20Detail/IMG_1818_zps7f0c8571.jpg

http://i148.photobucket.com/albums/s6/kkullar/S2000/Exterior%20Detail/IMG_1864_zps9de3beb4.jpg

http://i148.photobucket.com/albums/s6/kkullar/S2000/Exterior%20Detail/IMG_1871_zpsce23f57d.jpg

http://i148.photobucket.com/albums/s6/kkullar/S2000/Interior%20Detail/IMG_1900_zpsbb4ba7f9.jpg

http://i148.photobucket.com/albums/s6/kkullar/S2000/Interior%20Detail/IMG_1915_zpsa1484b7b.jpg

Kev

What did you use on the leather? Big difference.

More pics of the whole car!

[Grim]

You mean Volk's, right? haha. Better direction than the Varrstoens.

shit. you're right...
i nubbed it.:whistle:

[Roach]

To clean the leather, the products used were 1Z einszett Plastic Deep Cleaner (http://www.detailersdomain.com/1Z-einszett-Plastic-Deep-Cleaner_p_106.html) and an Uber Ultra Interior Brush (http://www.detailersdomain.com/Uber-Ultra-Interior-Brush-for-Orbital-Polisher_p_754.html) on my Porter Cable 7424. Wiped up with a clean terry cloth. It's important to keep the Porter Cable at a very low speed - I used speed 1. Very quick process but it sure beats using elbow grease.

And if you guys decide to order the above products from Detailer's Domain, they are having a pre-memorial day sale - 15% off and $8.88 flat shipping over $50. Code is PREMEM. Ends on May 13th.

Kev

[Acura604]

Detailed ext/int


Kev



looks great.. can you tell us the process you did?

i.e. wash/dry/clay/wax/dry? interested in how u got the swirls out. i'm going to use my wifes black 06 civic as a guinea pig - swirl removal project.

thanks!

[Gh0stRider]

removed my snow tires finally :p

[JoshuaWong]

Did some car swapping today...
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-snc6/270899_10151590527144153_2088742688_n.jpg
Then this
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash3/942897_10151590817934153_738854781_n.jpg

Kinda heart broken really, when I went back to the M3:alone:

[Grim]

teaser pix from serial nine

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn1/931153_10152873559220565_463319341_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/936151_10152873558960565_989622004_n.jpg
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-snc6/262488_10152873559055565_1698985503_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/936732_10152873559125565_2106107020_n.jpg

[CP.AR]

Thanks for the answer Roach! Too bad I don't have my porter cable here...

Anyways today:
Washed, Clayed, Hand Polished, Hand Waxed my car :)

[unkicrackie]

Got some tires mounted onto my wheels! :D

http://imageshack.us/a/img189/8696/imagemecx.jpg

[ForeverYours]

Finally finished lowering the front of the car; new coilovers and new rotors installed

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-snc6/201504_331836863611329_525399419_o.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/964555_331836896944659_1931085777_o.jpg

Car is so dirty :okay:

Doing some more minor adjustments to the coils and taking out the rubstrips later... I need to roll fenders soon anyone got a fender roller I could borrow? :okay:

[Gh0stRider]

found my exhaust leak :(

http://img.photobucket.com/albums/v476/TRD604/Civic/2013-05-11191755_zps6e1fc1e5.jpg (http://smg.photobucket.com/user/TRD604/media/Civic/2013-05-11191755_zps6e1fc1e5.jpg.html)
Posted via RS Mobile

[CP.AR]

Helped my friend change his front brake pads today
I pop the caliper off and see this fall out...

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/946256_10151661396266189_1822398150_n.jpg

(for those interested, car is a 1997 Mitsubishi Magna)

[Gh0stRider]

no shops open on sundays :(
will have to wait till monday to fix the leak. need a new gasket

[fliptuner]

just a donut? diy it.

[Gh0stRider]

not sure which style gasket it is. i didn't get under the car

[TRD Rs200]

fog light hids!!!

http://i59.photobucket.com/albums/g308/ahfai12/20130512_180336_zps5c68b066.jpg
Posted via RS Mobile

[CP.AR]

Low Beam HIDs!!

inb4 OMG RICER GLARE CIVIC RICHMOND: They are in projectors, which in Japan were fitted with factory HIDs. I have already aimed them properly in the vertical sense, but then the rain came so horizontal wise they are off to the left (remember, I'm on the wrong side of the road so they are aimed at the sidewalk). Horizontal aiming to come tomorrow.

[J.C]

http://i905.photobucket.com/albums/ac258/Jiepo/20130513_171449_zps652d1a60.jpg (http://s905.photobucket.com/user/Jiepo/media/20130513_171449_zps652d1a60.jpg.html)
http://i905.photobucket.com/albums/ac258/Jiepo/20130513_171439_zpsedc99b33.jpg (http://s905.photobucket.com/user/Jiepo/media/20130513_171439_zpsedc99b33.jpg.html)

hello there
isis race exhaust
matte black wing badge
asr interior and license plate led conversion (wish they were brighter though)
also removed open road license plate frames :troll:

[boibuddha]

Stuff I've done over the past couple of weeks.

This is how she sat 2 weeks ago (fisting action in the wheel wells was possible on all 4 corners)
http://img.photobucket.com/albums/v104/boibuddha/20120626_183617.jpg

Then these guys went in
http://img.photobucket.com/albums/v104/boibuddha/20130328_203110_zps8913f8a7.jpg
http://img.photobucket.com/albums/v104/boibuddha/20130328_202915_zps87e489a0.jpg
http://img.photobucket.com/albums/v104/boibuddha/20130503_205127_zps43b19700.jpg
Tanabe USA Inc. - DF210 Dress-Up Form Springs (http://www.tanabe-usa.com/df210.asp?id=1)

And now she sits about 2" lower than she previously did (although the box stated a 1.5" drop)
http://img.photobucket.com/albums/v104/boibuddha/20130509_201551_zps57ffcdaf.jpg

Waiting a couple of weeks for things to settle and will get an alignment done then.
Posted via RS Mobile

[Great68]

http://t0.gstatic.com/images?q=tbn:ANd9GcQtfYcS9lcebu2Z2Q79HWJLXfk29ZSp0 ip7csKkaLEWzMWQyvHGBw

Bought a house... With a detached garage to keep my car dry & safe.

[suprat88h]

I Took this blown pos off

http://i545.photobucket.com/albums/hh382/renabasile/f6024fd6-b834-4fdf-b8b1-8f9715482e9d.jpg (http://s545.photobucket.com/user/renabasile/media/f6024fd6-b834-4fdf-b8b1-8f9715482e9d.jpg.html)

And installed these

http://i545.photobucket.com/albums/hh382/renabasile/c30f3d1b-6c06-4802-abd0-ba4ece9938fc.jpg (http://s545.photobucket.com/user/renabasile/media/c30f3d1b-6c06-4802-abd0-ba4ece9938fc.jpg.html)

http://i545.photobucket.com/albums/hh382/renabasile/d26293bf-297b-4ed8-b74c-e5453e9d8e73.jpg (http://s545.photobucket.com/user/renabasile/media/d26293bf-297b-4ed8-b74c-e5453e9d8e73.jpg.html)

http://i545.photobucket.com/albums/hh382/renabasile/99e947c8-74b2-4edc-9cca-1687dd37969d.jpg (http://s545.photobucket.com/user/renabasile/media/99e947c8-74b2-4edc-9cca-1687dd37969d.jpg.html)

[J.C]

http://i905.photobucket.com/albums/ac258/Jiepo/20130515_164130_zps33295abe.jpg (http://s905.photobucket.com/user/Jiepo/media/20130515_164130_zps33295abe.jpg.html)
http://i905.photobucket.com/albums/ac258/Jiepo/20130515_205736_zpseb3eb69a.jpg (http://s905.photobucket.com/user/Jiepo/media/20130515_205736_zpseb3eb69a.jpg.html)

installed the isis race catback exhaust with my dad, took 4hours because first time and small fitment problems
no photos/videos installed, phone died :(

[!e.lo_]

Went to Mission for Ubcscc trackday.
Myself and ilvtofu
http://imageshack.us/a/img829/7331/imagezya.jpg

[fliptuner]

And installed these

http://i545.photobucket.com/albums/hh382/renabasile/c30f3d1b-6c06-4802-abd0-ba4ece9938fc.jpg (http://s545.photobucket.com/user/renabasile/media/c30f3d1b-6c06-4802-abd0-ba4ece9938fc.jpg.html)

That's one of the sexiest things I've seen all day. :sweetjesus:

Greaseable?

[suprat88h]

^ They use 2- piece self lubricating Teflon injected ends no grease needed :)

[asr]

testing fitting
http://farm8.staticflickr.com/7290/8743981668_d315671029_c.jpg

[westopher]

Went to Mission for Ubcscc trackday.
Myself and ilvtofu
http://imageshack.us/a/img829/7331/imagezya.jpg
Did tyler_P beat 99% of you?

[sonick]

replaced shifter bushings, put in braided clutch line.
Posted via RS Mobile

[afadafa]

Finally mounted my wing!



http://imageshack.us/a/img10/5091/img3790ro.jpg

[maxxxboost]

Made a spare key for my motorcycle.

[bensta]

put in bilstein/neuspeed coilovers weds night, and put rims on too. also got BWR hood risers

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn1/65669_10151465540487712_1732476264_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc3/976375_10151465536587712_443069142_o.jpg

[dared3vil0]

Painted the interior of the new Jeep from a black/dark grey to metallic silver.


http://i738.photobucket.com/albums/xx27/dared3vil0/photo_zps342f859e.jpg (http://s738.photobucket.com/user/dared3vil0/media/photo_zps342f859e.jpg.html)
http://i738.photobucket.com/albums/xx27/dared3vil0/photo_zps08b1d4bf.jpg (http://s738.photobucket.com/user/dared3vil0/media/photo_zps08b1d4bf.jpg.html)
http://i738.photobucket.com/albums/xx27/dared3vil0/photo_zps7c772375.jpg (http://s738.photobucket.com/user/dared3vil0/media/photo_zps7c772375.jpg.html)
http://i738.photobucket.com/albums/xx27/dared3vil0/photo_zps6b8149da.jpg (http://s738.photobucket.com/user/dared3vil0/media/photo_zps6b8149da.jpg.html)

[GDChoi]

changed oil

[!e.lo_]

Did tyler_P beat 99% of you?

maaaaan.... that guy....

[extracrunchie]

Finally got a chance to install a short shifter with stainless steel shift knob

http://farm4.staticflickr.com/3683/8755869236_50fac5d435_c.jpg

http://farm6.staticflickr.com/5447/8754730051_fdeea28b64_c.jpg

[Volvo-brickster]

changed the oil

cracked drain and fill bolts loose on front and rear diff to make sure they weren't seized for up coming gear oil change

discovered previous owner stripped the living shit out of transmission drain bolt so back to a transfer pump to drain/ refill :(

[westopher]

maaaaan.... that guy....
haha not sure if you mean me for the sassy comment, or if he did something douchey at the track?

[Nicotine]

http://i105.photobucket.com/albums/m205/nicolaspal/IMG_1040_zps8e7aafa2.jpg (http://s105.photobucket.com/user/nicolaspal/media/IMG_1040_zps8e7aafa2.jpg.html)
projector retro fit
now need to get rid of fluting on inside of stock lens.

[SpuGen]

Yesterday.

Berk Intercooler.
Went out to test for boost leaks, and had to pull over twice to replace a broken clamp.

Good thing I only have to do this once.

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn2/603459_10152843834540165_2084808040_n.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn2/981649_10152843835970165_2051777160_o.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/919575_10152843836370165_1561994270_o.jpg

Next :
- Replace that Rear quarter louver vent that flew off.
- Roll fenders + Lower
- Replace clutch line when it arrives. It sat for a looong time. I guess Rats got to it and there's a pinhole leak. Flushed it when I bought it and it's already contaminated.

[bcrdukes]

Glad to see that intercooler kit finally go into that car! :D

[SpuGen]

Still need to put in the TechnoToy goodies you gave me. But I want to do all the suspension stuff at once.

[j.f0ng]

Replaced front and rear wiper blades

[1BADMR2]

Yesterday.

Berk Intercooler.
Went out to test for boost leaks, and had to pull over twice to replace a broken clamp.

Good thing I only have to do this once.


I installed the EMS intercooler kit a while back and had to use the torque (t-bolt) clamps after the worm-gear clamps kept failing and popping off at 15 psi.
Really pain in the ass to install the intercoolers in the MR2, I was in some really weird positions but I love the car.

[kakucaekz]

You're not properly working on the engine in an MR2 unless you're doing acrobatics at the same time! :D I want an intercooler kit too :(

Oh, also, I fixed another puncture in my rear right tire. That thing has 2 patch jobs on it now! :(

[tofu1413]

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/945806_10151468745331559_1778520445_n.jpg

picked up a set of almost new RE11 from a parted out car... :fullofwin:

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/385294_10151468831001559_339454646_n.jpg

also put on different springs: H&R sports along with a pair of front koni yellow shocks... also installed camber bolts in the front. t'was a good day. no more stretched look on tires!

[mb_]

You're not properly working on the engine in an MR2 unless you're doing acrobatics at the same time! :D I want an intercooler kit too :(

Oh, also, I fixed another puncture in my rear right tire. That thing has 2 patch jobs on it now! :(

Too much Tokyo drift :troll:
Posted via RS Mobile

[SpuGen]

I want an intercooler kit too :(

Good luck. It was a giant pain in the ass.

I'm not looking forward to doing the eventual Clutch job. :heckno:
or the fuel pump. :heckno::heckno:
Or the hoses. :heckno::heckno::heckno:

[kakucaekz]

Clutch job was a pain, took me a weekend with a lift. I'm dreading the timing belt coming up. =/

[J.C]

http://uniqperformance.ca/wp-content/uploads/2012/08/Aluminum-Mesh-RMX.jpg

ordered this grille for the gen, hopefully the mesh comes black and not silver

[MADEINJAPAN]

Installed Motordyne TDX V2 Exhaust.
Nissan/Infiniti guys would know what it is. :D
11 Week wait. Regret nothing.

Nissan 350z - Exhaust - MotorDyne Engineering (http://www.motordyneengineering.com/index.php?cPath=2_9&osCsid=35c5a10905ec9913c30c5c92cfe0182a)

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/942985_10151913922045830_615136400_n.jpg

Motordyne TDX V2 w/ ART Pipes - YouTube

[w202]

picked up my stuff from the salvage yard and said goodbye.

http://i1345.photobucket.com/albums/p675/gyong1985/IMG-20130520-WA0003_zpsafa40736.jpg (http://s1345.photobucket.com/user/gyong1985/media/IMG-20130520-WA0003_zpsafa40736.jpg.html)

http://i1345.photobucket.com/albums/p675/gyong1985/IMG-20130520-WA0001_zps9a4e63e7.jpg (http://s1345.photobucket.com/user/gyong1985/media/IMG-20130520-WA0001_zps9a4e63e7.jpg.html)

http://i1345.photobucket.com/albums/p675/gyong1985/20130521_114428_zpsda499762.jpg (http://s1345.photobucket.com/user/gyong1985/media/20130521_114428_zpsda499762.jpg.html)

http://i1345.photobucket.com/albums/p675/gyong1985/20130521_114420_zpsa1292d9a.jpg (http://s1345.photobucket.com/user/gyong1985/media/20130521_114420_zpsa1292d9a.jpg.html)

[Tq]

Ouch that sucks man hope your ok!!




picked up my stuff from the salvage yard and said goodbye.

http://i1345.photobucket.com/albums/p675/gyong1985/IMG-20130520-WA0003_zpsafa40736.jpg (http://s1345.photobucket.com/user/gyong1985/media/IMG-20130520-WA0003_zpsafa40736.jpg.html)

http://i1345.photobucket.com/albums/p675/gyong1985/IMG-20130520-WA0001_zps9a4e63e7.jpg (http://s1345.photobucket.com/user/gyong1985/media/IMG-20130520-WA0001_zps9a4e63e7.jpg.html)

http://i1345.photobucket.com/albums/p675/gyong1985/20130521_114428_zpsda499762.jpg (http://s1345.photobucket.com/user/gyong1985/media/20130521_114428_zpsda499762.jpg.html)

http://i1345.photobucket.com/albums/p675/gyong1985/20130521_114420_zpsa1292d9a.jpg (http://s1345.photobucket.com/user/gyong1985/media/20130521_114420_zpsa1292d9a.jpg.html)

[!Aznboi128]

Hey extracrunchie, which short shift you get fort the tsx?

[trollguy]

Finally mounted my wing!



nice s, saw it parked @ razor/nash (whatever) yesterday!

[i-vtecyo]

installed my short ram intake =P

http://i65.photobucket.com/albums/h213/69xchange/DSC_0031_zps2eb7e929.jpg

[!e.lo_]

haha not sure if you mean me for the sassy comment, or if he did something douchey at the track?

no, nothing towards you.

oh, just that he's got a bad rep now and all.

[meme405]

Bought my tires and a set of project kics lug nuts. In Neo chrome.

[Slow63]

http://i1073.photobucket.com/albums/w393/kjai63/WeeklyRoutine_zpsd1b2fe2e.png

Weekly Routine

[westopher]

no, nothing towards you.

oh, just that he's got a bad rep now and all.I got nothing against the guy, I'm just cracking jokes. I'm sure no one really cares. I need to get a car that I can get out on the track though. I'm jealous of you guys out there.

[jackp0t]

switch carbon hood at g5 parking lot because no truck:lawl:

old
http://i1178.photobucket.com/albums/x374/jackp0t_/20130523_165811.jpg (http://s1178.photobucket.com/user/jackp0t_/media/20130523_165811.jpg.html)

new
http://i1178.photobucket.com/albums/x374/jackp0t_/20130523_171200.jpg (http://s1178.photobucket.com/user/jackp0t_/media/20130523_171200.jpg.html)

sick rides
http://i1178.photobucket.com/albums/x374/jackp0t_/20130523_172417.jpg (http://s1178.photobucket.com/user/jackp0t_/media/20130523_172417.jpg.html)

[EvoLove]

installed my new ETS 4" intercooler Black loos so nice XD all i need to do now is install my ssp underpanel so when you look down all you see is black. https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/967206_10152827408795587_22007452_o.jpg

[extracrunchie]

Hey extracrunchie, which short shift you get fort the tsx?

it was custom made by a forum member, he is currently taking deposits again.

Quest for the Ultimate/Affordable TSX Short Shifter - Page 40 - Acura TSX Club : Acura TSX Forum (http://www.tsxclub.com/forums/1st-gen-engine/51710-quest-ultimate-affordable-tsx-short-shifter-40.html#post1000586)

[Limitless]

Breaking in new pads and rotors after sledgehammering off my old rotor :)
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc3/292947_10152836336665582_4596148_n.jpg

[J.C]

quick wash (ran over some white stuff going around the block fuuuuu), love the burnt tips on my exhaust, looks really cool from the side view in person
these pics do no justice lol

[nabs]

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/931402_10151566297232834_1719395143_n.jpg

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-snc6/263208_10151566297137834_1276465091_n.jpg

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/942552_10151566297107834_849321119_n.jpg

[ForeverYours]

Fixed instrument cluster speedometer needle... I actually know how fast I'm going now :badpokerface:

But... half of the cluster backlighting still doesn't work :okay:

[Mitskuni]

JDM'd my korean car's fog lights :fuckyea::toot:

http://i1048.photobucket.com/albums/s371/CharlieCwang/20130527_174616.jpg

[threezero]

i'm finally not on winters :whistle:

[snails]

parked under a truck!

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-frc1/485506_593761217310456_2000392724_n.jpg

[asr]

lol that's nice. ^Is this thunderbird plaza on 88ave?

[snails]

yeah, bchondas has a meet every wednesday at 7:30

[Limitless]

Took my integra for a quick drive :) Miss driving it
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc3/981872_10152852597260582_2022701656_o.jpg

And finally got my rear window tinted! My front driver side window glass thing also fell off the window track today so had to take apart my door again to fix that.. :S But wasn't too bad. Super happy about the tint :)
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn2/969319_10152851887110582_244594535_n.jpg

[Araaadi]

Took my integra for a quick drive :) Miss driving it
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc3/981872_10152852597260582_2022701656_o.jpg

And finally got my rear window tinted! My front driver side window glass thing also fell off the window track today so had to take apart my door again to fix that.. :S But wasn't too bad. Super happy about the tint :)
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn2/969319_10152851887110582_244594535_n.jpg



needs nismo spoiler

[dvdjels]

Went back to stock wheels...sigh

[Timbits93]

Finally got around to replace the old scratched up front door finishers with new ones in my G. :whistle:

http://imageshack.us/a/img834/1150/imag0055rj.jpg

http://imageshack.us/a/img16/1839/imag0056ip.jpg

[TRD Rs200]

atf flush, brake fluid flushed

[BBMme]

transfered my insurance from my benz to my fiat :( sad day.

[dared3vil0]

^ why would you?

[J.C]

installed grille, gloss black wing going on the back later today :D
need plate frames
cf rear lip next

http://i905.photobucket.com/albums/ac258/Jiepo/20130601_163519_zps05f0487e.jpg (http://s905.photobucket.com/user/Jiepo/media/20130601_163519_zps05f0487e.jpg.html)

[Limitless]

needs nismo spoiler

Not a big fan of the nismo spoiler, ordered a Mine's looking CF spoiler and picking it up on Monday :)

http://farm9.staticflickr.com/8264/8671656994_44602c5b55_c.jpg
http://i00.i.aliimg.com/photo/v0/107894308/Nissan_370Z_Z34_carbon_rear_wing_Mine.jpg

New tires are in! 305/30 and 265/35 :D
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn2/603128_10152857701285582_185338786_n.jpg


I definitely need them after sliding around like crazy last night over in the states lol.. Barely made it home :S
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn2/976966_10152857550980582_721309687_o.jpg

[eurochevy]

New tires are in! 305/30 and 265/35 :D
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn2/603128_10152857701285582_185338786_n.jpg


mmmmmmmmmmmmmmmmmm super sports..good choice:fuckyea:

[Limitless]

:D

[q0192837465]

Installed smart top. My back hurts now
Posted via RS Mobile

[!SG]

summer fun wheels.

just happy that i remembered how to mount tires on the wheels!

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn2/981570_10152903046100381_954976864_o.jpg

[unkicrackie]

Mounted my lip kit properly, installed my stereo and added a bit more camber to the front. :)

https://lh4.googleusercontent.com/-m89t84vPU50/Uar9ZVJITwI/AAAAAAAAANE/JX_iDhlv1wo/s1152/IMG_0434.jpg
https://lh3.googleusercontent.com/-T22yegrDt3A/Uar9b9v9dpI/AAAAAAAAANU/omA4q0oxRQ8/s1152/IMG_0436.jpg
https://lh5.googleusercontent.com/-RCSg0MEwk4Q/Uar9hBfS5uI/AAAAAAAAANs/Der_VEix2fg/s1152/IMG_0440.jpg
https://lh3.googleusercontent.com/-42cctuRr_BY/Uar9hEi4zcI/AAAAAAAAANk/HI6eBYpTpXs/s720/IMG_0441.jpg
https://lh5.googleusercontent.com/-0XiOtOMwDOw/Uar9hXWderI/AAAAAAAAANo/fXkVMBiEV0A/s1152/IMG_0444.jpg

[Type R 00-1111]

Posted via RS Mobile

[Grim]

rattle can, cause why not? :D

http://i171.photobucket.com/albums/u304/azn_fryrice/20130602_135406_zpsf1880a91.jpg (http://s171.photobucket.com/user/azn_fryrice/media/20130602_135406_zpsf1880a91.jpg.html)

[!SG]

1/2 done. wet sand and polish 1/2 the hood
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn1/941717_10152906146230381_838721433_n.jpg

[kchan]

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc3/292634_10151404056842653_526673443_n.jpg

id give Tyler_P a run for his money :accepted:
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/247618_10151373038331507_820976525_n.jpg

[see.lai]

Installed exhaust, re-lowered, and put on my rear lip. Oh, and washed the car and fixed some interior lights that were burnt out. :D

[ApePee2]

Spent 8 hours doing a whole bunch of things
http://www.freewebs.com/li3nn/20130531_194632.jpg
- engine oil
- transmission oil
- differential oil
- gravity bled brakes & clutch
- repainted brake caliper from gold to silver


http://www.freewebs.com/li3nn/2013-06-02%2020.40.21.png

[duy-]

thought i would motivate myself this weekend to finish my car by pushing it sideways and taking up my regular spot... looks like ill have to park on the street this week :okay:

http://i349.photobucket.com/albums/q375/duy-/null_zps12c4785e.jpg (http://s349.photobucket.com/user/duy-/media/null_zps12c4785e.jpg.html)

http://i349.photobucket.com/albums/q375/duy-/null_zps9514beb1.jpg (http://s349.photobucket.com/user/duy-/media/null_zps9514beb1.jpg.html)

[BBMme]

^ why would you?
I'm moving and I'm not bringing my Benz=(

[MindBomber]

lol that's nice. ^Is this thunderbird plaza on 88ave?

Good eye.

[kakucaekz]

My driver side window started acting weird, it wouldn't go up or down smoothly and made a weird clunking noise. I was gonna take it in to the shop to look at it, but then the regulator just broke today. Tore my door trim off, breaking off an already breaking clip in the process, removed the regulator and jammed some 2x4s in there to keep the window up. It's gonna suck having it like that with a car that has no AC, leather seats and a glass roof LOL.

Hope I find a regulator soon, car is still drivable but not fun when you gotta baby every corner and bump so the 2x4s dont slip and the window falls. No drive thrus any more either! D:

http://i282.photobucket.com/albums/kk262/RDazr/IMG-20130602-WA0005_zps18cce42f.jpg (http://s282.photobucket.com/user/RDazr/media/IMG-20130602-WA0005_zps18cce42f.jpg.html)

[Fafine]

My driver side window started acting weird, it wouldn't go up or down smoothly and made a weird clunking noise. I was gonna take it in to the shop to look at it, but then the regulator just broke today. Tore my door trim off, breaking off an already breaking clip in the process, removed the regulator and jammed some 2x4s in there to keep the window up. It's gonna suck having it like that with a car that has no AC, leather seats and a glass roof LOL.

Hope I find a regulator soon, car is still drivable but not fun when you gotta baby every corner and bump so the 2x4s dont slip and the window falls. No drive thrus any more either! D:


LOL i had to do the exact same thing a couple years ago,
i screwed the wood in though, and left a crack enough to ash my cigerattes.
i had ac though so goodluck to you haha

[kakucaekz]

I was thinking about screwing them in, but it's going to be short term and I'm gonna re-insure my Integra daily to drive around until this is fixed. Sucks having no door trim, nowhere to rest my left arm, since I don't rest my hand on top of the wheel lol.

[tofu1413]

^ yea i had a loose regulator on mine too... sounded like the glass wanted to fall apart when i close the door and roll down the window LOL.

better get it fixed soon... and try to avoid getting pulled over or road blocks... could get a VI for a driver window that doesnt open.

[kakucaekz]

Forgot about roadblocks and VIs.. shit I hope I can fix this quick lol.

[imp_squared]

thought i would motivate myself this weekend to finish my car by pushing it sideways and taking up my regular spot... looks like ill have to park on the street this week :okay:

http://i349.photobucket.com/albums/q375/duy-/null_zps12c4785e.jpg (http://s349.photobucket.com/user/duy-/media/null_zps12c4785e.jpg.html)

http://i349.photobucket.com/albums/q375/duy-/null_zps9514beb1.jpg (http://s349.photobucket.com/user/duy-/media/null_zps9514beb1.jpg.html)


Finish it up so you can work on my car!!! :fuckyea:

[mb_]

My driver side window started acting weird, it wouldn't go up or down smoothly and made a weird clunking noise. I was gonna take it in to the shop to look at it, but then the regulator just broke today. Tore my door trim off, breaking off an already breaking clip in the process, removed the regulator and jammed some 2x4s in there to keep the window up. It's gonna suck having it like that with a car that has no AC, leather seats and a glass roof LOL.

Hope I find a regulator soon, car is still drivable but not fun when you gotta baby every corner and bump so the 2x4s dont slip and the window falls. No drive thrus any more either! D:

http://i282.photobucket.com/albums/kk262/RDazr/IMG-20130602-WA0005_zps18cce42f.jpg (http://s282.photobucket.com/user/RDazr/media/IMG-20130602-WA0005_zps18cce42f.jpg.html)

I noticed that your window was acting weird but didn't think much of it :okay:
Posted via RS Mobile

[melloman]

Rolled fronts.
Pulled rears abit more.
Bored out strut tower holes for easy dampening adjustment. :awwyeah:

:thumbsup: to friptuner

[snails]

^ i needa borrow roller!

[320icar]

My driver side window started acting weird, it wouldn't go up or down smoothly and made a weird clunking noise. I was gonna take it in to the shop to look at it, but then the regulator just broke today. Tore my door trim off, breaking off an already breaking clip in the process, removed the regulator and jammed some 2x4s in there to keep the window up. It's gonna suck having it like that with a car that has no AC, leather seats and a glass roof LOL.

Hope I find a regulator soon, car is still drivable but not fun when you gotta baby every corner and bump so the 2x4s dont slip and the window falls. No drive thrus any more either! D:

http://i282.photobucket.com/albums/kk262/RDazr/IMG-20130602-WA0005_zps18cce42f.jpg (http://s282.photobucket.com/user/RDazr/media/IMG-20130602-WA0005_zps18cce42f.jpg.html)

Is that a miata? I have oem black NA door cards, and they have all the clips. Send me a pm if you need the clips from them. I don't have a miata anymore anyways.
Posted via RS Mobile

[fliptuner]

mister 2

[pb.kidz]

Laser interceptor installed in the front, still need to do the rear.

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn2/v/983510_10151420232777466_433139740_n.jpg?oh=e7dba4 24836eb93e443831a61f012d92&oe=51AF7294&__gda__=1370483520_94fa475e0521392aedad8e0a50ea273 9
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn2/v/986533_10151420381607466_409464964_n.jpg?oh=e3dea3 329e4cf1a9e289ca54e1874aa6&oe=51AF4091&__gda__=1370485573_caeeaf8fec86b9bc843641ca6763522 4

[Fafine]

^ thats legal?

[mb_]

http://www.drivesmartbc.ca/equipment/radar-and-laser-jammers

Radar and laser detectors are currently legal to install in your vehicle and use to avoid prosecution for failing to follow the speed limits in British Columbia. One has to ask why BC is one of the few provinces in our country that has not made this illegal. If you think like I do, inappropriate speed is a significant contributor to collisions and should not be encouraged in any way. Radar and laser detectors are encouraging some drivers to drive at inappropriate speeds every day.

Radar and laser jammers are another matter entirely. While they are not illegal to install they are illegal to use to defeat police speed measurement. In fact, if you are successfully prosecuted for using them, you will have a criminal record that could prove to be a significant handicap to you later in life. The offence is in obstructing a peace officer in the execution of his duty, in this case speed measurement.

Laser jamming devices are the most commonly found because modern lidar units warn their operator that they are being jammed. Since the vehicle being targeted is known precisely, it is easy to flag the driver out of traffic and start an investigation to confirm the source of the jamming. If found, the jamming equipment will be seized and kept to present as evidence at trial. If convicted, the equipment will be forfeit in addition to any other penalty imposed by the court.

Are you willing to trade the possibility of a fine and a few penalty points for the possibility of a criminal record? Think twice about the "legal counsel" provided by the producers and sellers of jamming equipment.

http://www.revscene.net/forums/647018-laser-radar-detector-works.html

You might want to do a search on the topic of Laser jammers...case law in BC for using one...a criminal code conviction for obstructing a Police Officer when you get caught. The Police Laser tells the operator that it is being jammed. I was involved personally in one seizure and conviction. As the Laser gets your speed reading in 1/3 of a second you might consider how you can detect the Laser reading and slow down below the limit in less than 1/3 of a second?

[dared3vil0]

Laser jammers are illegal.

[Grim]

http://i171.photobucket.com/albums/u304/azn_fryrice/20130603_1826511_zps1ab04f74.jpg (http://s171.photobucket.com/user/azn_fryrice/media/20130603_1826511_zps1ab04f74.jpg.html)

[dmak4]

http://i171.photobucket.com/albums/u304/azn_fryrice/20130603_1826511_zps1ab04f74.jpg (http://s171.photobucket.com/user/azn_fryrice/media/20130603_1826511_zps1ab04f74.jpg.html)

is that the "fin" diffuser replica?

[jing]

Technically it's also illegal for the plate frame to cover the expiry sticker though the legality of things never stopped no one as exemplified by the two posters above
Posted via RS Mobile

[dared3vil0]

Technically it's also illegal for the plate frame to cover the expiry sticker though the legality of things never stopped no one as exemplified by the two posters above
Posted via RS Mobile

One is a moving violation, the other is a CRIMINAL offence. You don't get a criminal record for having license plate frames- you can be charged with obstructing a peace officer for the jammers...

[Grim]

is that the "fin" diffuser replica?

its the myride rep..
authentic is made in korea :S

[inv4zn]

Some people will listen to advice...

... and those who don't often end up posting in the RS police forum. "HELP I DID WHAT EVERYONE TOLD ME NOT TO DO AND NOW I'M FUCKED ZOMG SHOULD I DISPUTE"

[dmak4]

its the myride rep..
authentic is made in korea :S

I forgot the name of the authentic. I think they call it "fin" diffuser or something like that on ebay. Not sure if i should get that or the GFX.

[boibuddha]

Went from fifty shades of grey moldings to BLAAAAACK.
http://img.photobucket.com/albums/v104/boibuddha/20130603_195708_zpsb663993f.jpg
I originally plastidipped them about a year ago but it got shredded after a while.

Also, I swapped out the original lift support struts, no more knocks to my noggin.

#oldcarproblems
Posted via RS Mobile

[kakucaekz]

Got my window fixed! Record time haha. Had the mounting points welded back and installed it back in.

http://i282.photobucket.com/albums/kk262/RDazr/IMG_20130603_222642_zpsbb2b7745.jpg (http://s282.photobucket.com/user/RDazr/media/IMG_20130603_222642_zpsbb2b7745.jpg.html)

:victory:

Right, almost forgot to give props to Paradise240 for holding the door and mb_ for sitting there looking pretty and shit. :haha:

[XplicitLuder]

sold it :alone:

[tofu1413]

sold it :alone:

car shopping time! :fuckyea:

[tegra7]

Sent it to MDA fabrication for an exhaust leak.

[Grim]

I forgot the name of the authentic. I think they call it "fin" diffuser or something like that on ebay. Not sure if i should get that or the GFX.
ohh.. i think i know what you're talking about..
no its different, that one is like.. S4PLAY or something

[pb.kidz]

http://www.drivesmartbc.ca/equipment/radar-and-laser-jammers



http://www.revscene.net/forums/647018-laser-radar-detector-works.html

:accepted: not if used smartly. You are supposed to jam to kill NOT jam to gun then its obvious to the officer that your fuckin with him and thats just asking for it. I have yet to see any cases

[knight604]

Waits until pb.kidz gets caught and posts about it on RS police forum.

[melloman]

Laser interceptor installed in the front, still need to do the rear.

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn2/v/983510_10151420232777466_433139740_n.jpg?oh=e7dba4 24836eb93e443831a61f012d92&oe=51AF7294&__gda__=1370483520_94fa475e0521392aedad8e0a50ea273 9
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn2/v/986533_10151420381607466_409464964_n.jpg?oh=e3dea3 329e4cf1a9e289ca54e1874aa6&oe=51AF4091&__gda__=1370485573_caeeaf8fec86b9bc843641ca6763522 4

I give you 6 months until a cop pulls you over and asks wtf that ugly green box in your grill does. If your going to put illegal shit on the car, atleast do it professionally and hide it behind the bumper.

:facepalm: x1000000000

[BrRsn]

I give you 6 months until a cop pulls you over and asks wtf that ugly green box in your grill does. If your going to put illegal shit on the car, atleast do it professionally and hide it behind the bumper.

:facepalm: x1000000000

I think the green thing is just a level? :pokerface:
Of all the places to mount it, why vertical in the kidney grill? :facepalm:

[dmak4]

ohh.. i think i know what you're talking about..
no its different, that one is like.. S4PLAY or something

no it's not that, I just checked the MyRide diffuser rep is called "JDM Shark Fin Diffuser" on ebay.

Nevertheless your IS is looking good!