[Fafine]

oil change

[radioman]

Clean.

Black, never again.

[crazyazn]

I made it scream with that beautiful voice of VTEC.....god my fuel economy is going down the drain with all this good weather

[beproud]

Brought my car to get the drop top estimated, and found out it was a very expensive mistake =( $3000 sooo angry with myself right now eh....

[dared3vil0]

^ What happened?

[beproud]

^ What happened?

Underground parking, didn't realized the piping was so low =( ripped my top and there is no quick fix because it's made out of cloth......... lesson learned.....

[dared3vil0]

Underground parking, didn't realized the piping was so low =( ripped my top and there is no quick fix because it's made out of cloth......... lesson learned.....

Holy shit how low was the piping? What do you drive?

[beproud]

^
low enough? hahaha I should've been more careful eh. Been driving a hard top convertible for awhile and I guess the cloth version opens a lot higher.......I drive a CLK63.

[dared3vil0]

^
low enough? hahaha I should've been more careful eh. Been driving a hard top convertible for awhile and I guess the cloth version opens a lot higher.......I drive a CLK63.

OHHHH It was while you were opening it... I thought you just meant driving with it closed. Was trying to figure out how the hell it was so low.

[fliptuner]

Reorganized the garage, test fitted mk1's wheels on his car, then on one of my cars....pics to come.

Sunny days are productive days.

edit: 19x9.5, +22, 225/35/19. Just chucked them on to get an idea of what specs I'm going to need to get the look I want. Yes, my unrolled fender is sitting on the tire...lol

Looks like I can easily run a 10.5 rear with a 255/30-35 and a +20-25mm offset. The front would probably get an 8.5-9, 225/40 and +35mm.

[bloodmack]

bled my cooling system for the billionth time :okay:

[Vulgate]

Changed back to crappy summer RFTs and broke my impact drill on the last wheel

[kakucaekz]

Properly fixed my headlights, no more 'good enoughs' :haha: The right one just stopped flipping up and down at the meet yesterday; the linkage arm fell off on the drive over. I had one headlight popped up for about half an hour during the meet, lol. So I got it on a lift where it was easy to work on, and replaced the short bolts with longer ones. Seriously, the nut on the end had a super small amount of thread, no wonder it kept slipping off. Also, on the cruise home last night, the other headlight (the one that flipped up and worked) blew its ballast, so I swapped in a temporary one. Now my lights are different shades of 6000K lol. But now, one of the high beams doesn't work, and a fog burnt out. THESE LIGHTS MAN, THEY HATE ME.

Also washed the daily today, after 6 months of driving it super dirty.

[hkRicer]

It slipped while its up ?

Yes it slipped/failed when I took off the passenger side rim. I was talking to my friend on the phone then after like 5 mins it slipped/failed in front of me. It happen so fast. I usually use jack stand even for changing rims but got lazy that day. I would of been injured for sure if my friend hadn't called me :okay:

[dared3vil0]

Yes it slipped/failed when I took off the passenger side rim. I was talking to my friend on the phone then after like 5 mins it slipped/failed in front of me. It happen so fast. I usually use jack stand even for changing rims but got lazy that day. I would of been injured for sure if my friend hadn't called me :okay:

You would of been injured? Since when do you go under the car to change a wheel? :suspicious:

[westopher]

Brought my car to get the drop top estimated, and found out it was a very expensive mistake =( $3000 sooo angry with myself right now eh....
What kind of car? That must have been a weird spot in the underground to be able to snag any car that obviously sits pretty low.

[mk1freak]

What kind of car? That must have been a weird spot in the underground to be able to snag any car that obviously sits pretty low.

he was opening the softtop on his clk63 in the underground.........:(


Yes it slipped/failed when I took off the passenger side rim. I was talking to my friend on the phone then after like 5 mins it slipped/failed in front of me. It happen so fast. I usually use jack stand even for changing rims but got lazy that day. I would of been injured for sure if my friend hadn't called me :okay:

hurry up and buy your lotto tickets you lucky bastard! glad you're ok! work safe nexttime so we can see more posts of your ride

Reorganized the garage, test fitted mk1's wheels on his car, then on one of my cars....pics to come.

Sunny days are productive days.

edit: 19x9.5, +22, 225/35/19. Just chucked them on to get an idea of what specs I'm going to need to get the look I want. Yes, my unrolled fender is sitting on the tire...lol

Looks like I can easily run a 10.5 rear with a 255/30-35 and a +20-25mm offset. The front would probably get an 8.5-9, 225/40 and +35mm.


should've posted pics of the tsw :troll:

[fliptuner]

Fucking stupid tire machine.... too small to reverse mount 19's.

[!e.lo_]

She got to see the sun and stretch for the past two days. But now back in storage for just a few more weeks.
Posted via RS Mobile

[tofu1413]

enjoying more windows down, vtec weather! bwahhhh

[dared3vil0]

enjoying more windows down, vtec weather! bwahhhh

I have to agree, Although it's looking like i won't be owning my FG2 for more than another month or so. I just can't seem to "love" this car.

[TjAlmeida]

Stripping most of the dash in the Corolla to get at the leaky heater core. Lots of things to keep track of, but not as bad as i thought!

Pics to come!

[tofu1413]

I have to agree, Although it's looking like i won't be owning my FG2 for more than another month or so. I just can't seem to "love" this car.

i dont exactly "love" mine either. :badpokerface:

does make a good noise though. I loved my old ITR though, and the Si reminds me a lot of it.. although more comfortable, refined and just as fast.

[hk20000]

U guys outgrew the spocom segment cars. Time for some v8.
Posted via RS Mobile

[tofu1413]

or rwd.. :pokerface:

[AVS_Racing]

conditioned the leather :megusta: tinkered with suspension settings again

[dared3vil0]

Sprayed some water on it out of the hose after school, Wash it? :fuckthatshit: i'll do that saturday... probably. :troll:

[BrRsn]

came to a stop in my car today and all the lights flickered and the electronics went haywire (engine sputtered, radio shut off, all the screens flickered ... )

Driving along, notice my voltage is cycling between 14V and 16V. Think "oh fuck voltage regulator is broken"

Get to stop light, engine shuts off. Restart engine, everything is reset but car runs perfectly.

My car healed itself today. Fuck all ya'll!

[Suprarz666]

^ sounds like maybe your alternator is on its way out.

[westopher]

Put the coils down a bit farther:fuckthatshit:
http://i99.photobucket.com/albums/l308/westopher2006/19E4A131-AE53-4677-ADCC-6B023F9BE242-2780-000001FB03B8AB1A_zpsc21b677c.jpg
We will see if it settles bit more. Heres how it sits in the front.
http://i99.photobucket.com/albums/l308/westopher2006/C1E86D5E-C325-40F7-BC5C-A07205902343-2780-000001FB08BF38D3_zps6c3815e1.jpg

[BrRsn]

^ sounds like maybe your alternator is on its way out.

checked battery, had some loose terminals (actually just sitting ontop of the temrinal, bolts were not tightened at all).

Tightened those up, hopefully that fixes something. :badpokerface:

[imp_squared]

winters out and summers in. finally got around to it.

[k2damax]

took off my bumper
thanks fufu and 240 :D

[PJ]

winters out and summers in. finally got around to it.

Same here. Just changed mine 2 days ago.
Ran some STP.
Probably do fuel filter today.
New cat should be in soon. :nyan:

[hk20000]

Put the coils down a bit farther:fuckthatshit:
http://i99.photobucket.com/albums/l308/westopher2006/19E4A131-AE53-4677-ADCC-6B023F9BE242-2780-000001FB03B8AB1A_zpsc21b677c.jpg
We will see if it settles bit more. Heres how it sits in the front.
http://i99.photobucket.com/albums/l308/westopher2006/C1E86D5E-C325-40F7-BC5C-A07205902343-2780-000001FB08BF38D3_zps6c3815e1.jpg
Ouch it looks like these are not full length adjustable ones. If you bottom out on city driving you might want to consider raise it back later. :suspicious:

[westopher]

Do you mean the adjustable shock bodies? The only brands that make those for my car are ksport and b+G both, not the greatest quality. Koni is well designed enough that they put the coils in the shocks intended range so they actually ride really well. Its just that I rub fender liner and hit subframe in bad spots. haha. Coils aren't gonna go back up til winter, but I may remove the lower locking collar to give it a bit more room to go down once I cut my fender liners.

[fliptuner]

I may remove the lower locking collar to give it a bit more room to go down

Love the look and I totally get what you're trying to accomplish but please don't do that.

[E60_M5]

Do you mean the adjustable shock bodies? The only brands that make those for my car are ksport and b+G both, not the greatest quality. Koni is well designed enough that they put the coils in the shocks intended range so they actually ride really well. Its just that I rub fender liner and hit subframe in bad spots. haha. Coils aren't gonna go back up til winter, but I may remove the lower locking collar to give it a bit more room to go down once I cut my fender liners.

I have had the Koni on my gti, with 1/3 thread to go it started bottoming out. With that being said, I got rid of them within 2 months and installed a set of Bilstein PSS10 which made the ride handled much better. Firmer, less bouncy.

If u want to go low, I suggest getting the H&R ultra low coils which got a shorter shock body.

[dared3vil0]

Do you mean the adjustable shock bodies? The only brands that make those for my car are ksport and b+G both, not the greatest quality. Koni is well designed enough that they put the coils in the shocks intended range so they actually ride really well. Its just that I rub fender liner and hit subframe in bad spots. haha. Coils aren't gonna go back up til winter, but I may remove the lower locking collar to give it a bit more room to go down once I cut my fender liners.

If you have a full car of people do you have rubbing issues with the tires against the fender wells?

[westopher]

I have had the Koni on my gti, with 1/3 thread to go it started bottoming out. With that being said, I got rid of them within 2 months and installed a set of Bilstein PSS10 which made the ride handled much better. Firmer, less bouncy.

If u want to go low, I suggest getting the H&R ultra low coils which got a shorter shock body.
My konis have never bottomed out in the shock. Unless you had huge bumpstops on yours I'm not sure what the issue was. I had bilstein pss9s before and couldn't handle how bone rattling they were, and they didn't go near low enough so I got rid of them for the konis. It comes to preference and how you have them set up, since we both made the opposite switch and are both happy with them. To dar3d3evil. My car doesn't rub in the rear at all no matter how full it is. Front rubs a bit on big bumps and full lock but it isn't really affected by passenger load.
Posted via RS Mobile

[jing]

Installed my ARtech exhaust on my Miata. 2.5" piping into a 3" Magnaflow race muffler. Custom made TIG welded goodness. Gf complains it's too loud tho lulz
Posted via RS Mobile

[westopher]

Love the look and I totally get what you're trying to accomplish but please don't do that.What issues would it cause? There is the piece there on the shock body that prevents the perch from dropping below the threads. I probably won't do it. More effort than its worth to go lower than what is already too low, but are you saying this for concerns of accelerated wear on suspension parts or an actual safety perspective?

[finbar]

R&Red the oil pressure sending unit. Had to move the steering pump out of the
way to make it happen.

16337


16338


Happy it's not the journals giving the low gauge.

[fliptuner]

BBF?

[bcrdukes]

I washed my dirty whore of a car. :sweetjesus:

[maxxxboost]

Watched the Canucks game while polishing my rims :thumbs::thumbs:

[Geoc]

came to a stop in my car today and all the lights flickered and the electronics went haywire (engine sputtered, radio shut off, all the screens flickered ... )

Driving along, notice my voltage is cycling between 14V and 16V. Think "oh fuck voltage regulator is broken"

Get to stop light, engine shuts off. Restart engine, everything is reset but car runs perfectly.

My car healed itself today. Fuck all ya'll!

GM Electricals :fuckthatshit:

[BrRsn]

GM Electricals :fuckthatshit:

I don't own a GM :suspicious:

[bcrdukes]

I learned something new today.

Jeep is made by GM, guys. GM!

[Geoc]

I don't own a GM :suspicious:

thought you drove something murican, didnt know the brand

[fliptuner]

Because general?

[JesseBlue]

changed motor mounts a few days ago...now the infiniti drives like a lexus...lol...

[AVS_Racing]

Vteced to port moody to pick up some cleaning products from Ken at autowerks. dat drive :megusta: but HW1 is still very crappy :okay:

[firebird79_00]

Installed hood struts, goodbye shitty hood prop.
http://i1279.photobucket.com/albums/y526/firebird79_953/70D5030F-6E25-46FB-8EE4-F894BEF82825-11594-00000A54C791D560_zpsd32f4ac5.jpg
Posted via RS Mobile

[lilaznviper]

took off the old window deflectors
http://i.imgur.com/1HnNHW7.jpg

then tried to program some options with techstream software for my car... software doesn't work with windows 7
http://i.imgur.com/xVP5hDp.jpg

[sonick]

Replaced PCV valve and changed the spark plugs. Didn't seem like it needed it but just wanted to tinker with the car in such nice weather.
Posted via RS Mobile

[Kaolinite]

after lowering my car at low speeds like parking.. something clunks when i turn the wheel so i raised it back up but its still there :(

[fliptuner]

Changed out my leaky rear coilovers and washed mine and the gf's cars.

The guy who had the coilovers before, didn't even set the preload, as if he tried to adjust it by loosening the spring. :facepalm:

The car drives so much nicer now.

[bcrdukes]

Replaced PCV valve and changed the spark plugs. Didn't seem like it needed it but just wanted to tinker with the car in such nice weather.
Posted via RS Mobile

Looks like you still have BMW'itis. :troll:

[gn02156668]

Repainted the rims in matte black ... ...

http://i15.photobucket.com/albums/a396/gn02156668/032920132593_zps78f2362c.jpg

[dared3vil0]

^ Uhhh... That's matte grey. :suspicious:

[gn02156668]

hmm , may be because of my camera ... ...:suspicious:

[dared3vil0]

I really like the matte grey that it (appears) to be though, So if it IS that color i vote leave it!

[gn02156668]

hahaha thanks ... well , I am leaving it then.

[melloman]

Installed front & rear upper strut bars & rear lower sway.

Corners :fullofwin:

[sonick]

Looks like you still have BMW'itis. :troll:

Haha totally eh
Posted via RS Mobile

[Yodamaster]

http://i.imgur.com/7oMd9Kk.jpg

[underscore]

Installed rear CVs, coilovers and hubs, the drivers side ebrake assembly, new SP Performance rotor, and Hawk pads

[ForeverYours]

Cleaned interior, changed LEDs around shifter, planning on removing exterior chrome trim in a few minutes

[BBMme]

Switched to high mileage oil
Posted via RS Mobile

[jtrinh]

Independent fog light mod. Fog lights now turn on regardless of which position the headlight switch is on. They normally only go on with the low beams.


http://i18.photobucket.com/albums/b106/jtrinh/6ADF5E4F-DB43-488F-B118-A34A92C44B4A-1319-000000F055FF8346_zps3d9eed0b.jpg
Fogs on. Drl & low beam off.
http://i18.photobucket.com/albums/b106/jtrinh/8005F0F9-4BFF-409E-860C-436E9FC6DB69-1319-000000F03D77CAD1_zpsc9371117.jpg
Fogs on. Drl on. Just like the IS in my avatar.
http://i18.photobucket.com/albums/b106/jtrinh/9E4EF60B-FE96-47F3-962C-9B2885771BE8-1319-000000F02C6D5858_zpsea9e9f8d.jpg

[BABU]

Change to summer wheels.
http://i.imgur.com/CnJKpJm.jpg

And got them both wet.
http://i.imgur.com/rc5qZ13.jpg

[?uestlove]

today i bent my 4runner rear bumper back into shape. we used some extremely high tech state of the art alpha technology to achieve this. patent pending

http://i282.photobucket.com/albums/kk271/micknak/photo15_zps8a8caaff.jpg


now that's dealt with, i need to deal with installing my dual transfer cases. check out the very nice machine work on the adapter plate to join 2 transfer cases together. made by marlin crawler

http://i282.photobucket.com/albums/kk271/micknak/photo16_zpsd2fd04fc.jpg

if i didn't spend all my money on this shit i would buy a nice camera.

[imp_squared]

washed the car, finally since last year Nov? LOL

[melloman]

Front DIY ghetto mudflaps

Hope to save my sides from rock chips :thumbsup:

[k2damax]

washed my car then installed my short shifter :)

[frotes_88]

Polished head and tail lights, then replaced key fob battery.Posted via RS Mobile

[fliptuner]

+50hp :lawl:

[Vigorous]

Me and a buddy just lowered my Vigor on Saturday. Took us some time but we figured it out.

[Atlantis]

2 tone? :D took off the back half and the tank. for those who didnt know, it was all plasti-dipped white. but the tank started to peel off because thats where its most contact is with the body, and the undertail was getting dirty :D
i kinda like it like this :)

[underscore]

^ I like it! Looks unique

[Atlantis]

^ I like it! Looks unique

thx

[spoon.ek9]

oil change and a wax to the daily :D

[yameen]

a big semi truck side swiped me and my parents into a ditch on knight. car flipped. was like a movie and the firefighters smashed the windows open to get me out. starting to believe a god is out there...thank god parents are safe.

[Kidnapman]

a big semi truck side swiped me and my parents into a ditch on knight. car flipped. was like a movie and the firefighters smashed the windows open to get me out. starting to believe a god is out there...thank god parents are safe.

fucking hell shit must've been traumatizing. Hope y'all recover soon.

[dared3vil0]

a big semi truck side swiped me and my parents into a ditch on knight. car flipped. was like a movie and the firefighters smashed the windows open to get me out. starting to believe a god is out there...thank god parents are safe.

:worthless:

[Yodamaster]

http://i.imgur.com/HLlNL4G.jpg

http://i.imgur.com/e3D5uV9.jpg

[ApePee2]

Not today, but on Sunday. Re-did the undercoating on the rear under coating.

[hk20000]

Replaced wiper blades... $4.97 from Walmart USA ftfw

[imp_squared]

Replaced wiper blades... $4.97 from Walmart USA ftfw

$4.97 + gas to drive down there + your time to drive down there = $ <- pretty sure it is in the double digits? :badpokerface:

LOL what else did you buy while you were down there?

[luke]

Nice work!

http://i.imgur.com/HLlNL4G.jpg

http://i.imgur.com/e3D5uV9.jpg

[FRStan]

Got coilovers installed today. A little lower than my liking, but got some larger diameter wheels coming so it'll be a bit higher

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn1/537894_10152704565645364_2046522462_n.jpg

[Mr.C]

Troubleshooting problems.

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc1/64278_10152743823925301_493678537_n.jpg

[imp_squared]

Got coilovers installed today. A little lower than my liking, but got some larger diameter wheels coming so it'll be a bit higher

not low enough. :badpokerface:

[knight604]

http://farm9.staticflickr.com/8249/8621978005_dfec251644_b.jpg

:tears::tears::tears::victory::victory:

[E.D.C.5]

http://farm9.staticflickr.com/8249/8621978005_dfec251644_b.jpg

:tears::tears::tears::victory::victory:

im thinking about getting those exact coilovers for my car too.

which site did you buy them from and how much?

[knight604]

1095USD shipped with rear cambers. ygpm.

[Tq]

http://farm9.staticflickr.com/8249/8621978005_dfec251644_b.jpg

:tears::tears::tears::victory::victory:

Yeeeee abut time!!!
Posted via RS Mobile

[fliptuner]

All knight did today was open the box and fart on his new parts to keep his pets away...:troll:

[knight604]

Forgot to add these :

http://farm9.staticflickr.com/8391/8622589623_a2bab822a7_b.jpg

[AVS_Racing]

^^ what car is it for? update us if you get clunking noise from the rear :pokerface:

[versep]

Troubleshooting problems.

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc1/64278_10152743823925301_493678537_n.jpg

Aw shiet I use the same laptop to code my e90 :fullofwin:

[yameen]

a big semi truck side swiped me and my parents into a ditch on knight. car flipped. was like a movie and the firefighters smashed the windows open to get me out. starting to believe a god is out there...thank god parents are safe.
:worthless:

Richmond Review - Vehicle overturns on Knight Street (http://www.richmondreview.com/news/201115711.html)

[dared3vil0]

That sucks. Luckily everyone's okay. :okay:

[mk1freak]

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/483699_601506449877678_2040964546_n.jpg

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-frc1/733885_601506463211010_1710576710_n.jpg

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/544578_601506479877675_1971371670_n.jpg

At Speed Syndicate, got coilovers installed, rims mounted, currently getting slight fender pulls done. much love for KDM, Curtis gives much love :pokerface:

[Energy]

Aw shiet I use the same laptop to code my e90 :fullofwin:

Do you offer coding services?

[Grim]

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/483699_601506449877678_2040964546_n.jpg

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-frc1/733885_601506463211010_1710576710_n.jpg

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/544578_601506479877675_1971371670_n.jpg

At Speed Syndicate, got coilovers installed, rims mounted, currently getting slight fender pulls done. much love for KDM, Curtis gives much love :pokerface:

so siiiick

[unkicrackie]

Installed my seats!

http://imageshack.us/a/img35/7863/imageqmkq.jpg
http://imageshack.us/a/img832/1696/imageidm.jpg

[nabs]

Looks so sexy, can't wait to see how it looks with the fenders rolled!

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/483699_601506449877678_2040964546_n.jpg

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-frc1/733885_601506463211010_1710576710_n.jpg

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/544578_601506479877675_1971371670_n.jpg

At Speed Syndicate, got coilovers installed, rims mounted, currently getting slight fender pulls done. much love for KDM, Curtis gives much love :pokerface:

[fliptuner]

See, all that anxiety and for what? Looks awesome, man.

[nabs]

^^
He was sooo anxious... pacing back and forth the whole time, lol.

[mk1freak]

it wasn't too extreme of roll/pull and you can barely notice it unless your looking for it, fenders still looks oem.
and thanks guys,I already want to sell the wheel/ and tires, for another setup:badpokerface:

[asr]

Not for my vehicle
Mod the KDM grill for MK1freak to fit on USDM bumper.
Protectdipped in Matte Black.
http://farm9.staticflickr.com/8393/8627134292_7fd2d85116_b.jpg

[mk1freak]

Not for my vehicle
Mod the KDM grill for MK1freak to fit on USDM bumper.
Protectdipped in Matte Black.
http://farm9.staticflickr.com/8393/8627134292_7fd2d85116_b.jpg

Lol, already? now to just install......

[asr]

^We will put it on when the weather turn nice.

[radioman]

so much KDM love <3

[CP.AR]

finally changed the oil...

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn1/320035_10151600001916974_1865770172_n.jpg

stupid me forgot to buy a filter wrench... guess I'll be changing the oil again in 2 months

[Tq]

http://i86.photobucket.com/albums/k88/Nubbyds/IMG_1008_zps9d623e94.jpg
http://i86.photobucket.com/albums/k88/Nubbyds/IMG_1010_zps3cadd991.jpg
http://i86.photobucket.com/albums/k88/Nubbyds/IMG_1011_zpsf62aefc6.jpg

[dvst8]

tires for the season
https://lh5.googleusercontent.com/-VVnTvIrGG4k/UWI0MLDK7dI/AAAAAAAAFX8/poN9z_f7H10/s640/PicsArt_1365385592508.jpg

[i-vtecyo]

tony, i hope u have stands under there!

[Bender Unit]

tony, i hope u have stands under there!

You missed his homemade wooded ramps :fullofwin:

[Tq]

Jack stands?? Never heard of it!!!
Posted via RS Mobile

[Grim]

http://i86.photobucket.com/albums/k88/Nubbyds/IMG_1008_zps9d623e94.jpg
http://i86.photobucket.com/albums/k88/Nubbyds/IMG_1010_zps3cadd991.jpg
http://i86.photobucket.com/albums/k88/Nubbyds/IMG_1011_zpsf62aefc6.jpg



where is your bro's celica?!

[JoshuaWong]

Ripping around paid off lol
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/528424_10151537513899153_1680925536_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn1/625594_10151537515759153_1530014473_n.jpg
Properly installed the lip today, scraped some more :okay:
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-snc7/306044_10151537514704153_765991584_n.jpg

[dhari]

Hey guys, didn't wanna start a new thread, but will any of you be going to the Lordco Tradeshow? Does anyone have any info on it other that what is stated online?

Lordco - 22nd Annual Tradeshow (http://www.lordco.com/tradeshow/)

[dared3vil0]

Washed it, Starting to detail it. Last week with the car. Going to miss it but it was time for a new one. :(

[a00755836]

played a bit on the obd2 bluetooth that finally came in the mail.

http://i1307.photobucket.com/albums/s588/a00755836/20130409_151330_zpsbf841a3d.jpg

http://i1307.photobucket.com/albums/s588/a00755836/xrs/Screenshot_2013-04-09-15-14-17_zps1c851818.png

[mk1freak]

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/523513_235589189914664_399814822_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/15243_235588626581387_154356061_n.jpg

installed KDM badgeless grill and protect dipped the chrome hood trim with ASR.

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/59213_235579683248948_390704939_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn1/541415_235579653248951_2067712050_n.jpg

exhaust tips need polishing :okay:

[AVS_Racing]

^^ duno why but just seems like you need a lil bit moar low

[ruthless]

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/523513_235589189914664_399814822_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/15243_235588626581387_154356061_n.jpg

installed KDM badgeless grill and protect dipped the chrome hood trim with ASR.

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/59213_235579683248948_390704939_n.jpg

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn1/541415_235579653248951_2067712050_n.jpg
exhaust tips need polishing :okay:

plasti/protect dip the chrome bar across the trunk as well

[Energy]

The grille might look even better if it were gloss black.

[mk1freak]

plasti/protect dip the chrome bar across the trunk as well

we were going to but it was raining and we were lazy to take it off to spray LOL.
waiting to do it on a sunnier day :fullofwin:

[Nvasion]

http://i86.photobucket.com/albums/k88/Nubbyds/IMG_1008_zps9d623e94.jpg
http://i86.photobucket.com/albums/k88/Nubbyds/IMG_1010_zps3cadd991.jpg
http://i86.photobucket.com/albums/k88/Nubbyds/IMG_1011_zpsf62aefc6.jpg



do you work on bridgeport at 5?

i think i always see your car there and i see you on the drive home on knight bridge.

[Tq]

do you work on bridgeport at 5?

i think i always see your car there and i see you on the drive home on knight bridge.


haha yeah i work beside you at kal.

[Volvo-brickster]

played a bit on the obd2 bluetooth that finally came in the mail.

http://i1307.photobucket.com/albums/s588/a00755836/20130409_151330_zpsbf841a3d.jpg

http://i1307.photobucket.com/albums/s588/a00755836/xrs/Screenshot_2013-04-09-15-14-17_zps1c851818.png



nice

what app and what OS ?

[Grim]

Yay or Nay?
if yay, what color :O
(not my car)
http://lh5.ggpht.com/_BmHMqeird10/TMvAxhZnf6I/AAAAAAAAAPw/Mz9nobGU0TQ/s800/IMG_4710.jpg

[westopher]

MK1Freak that looks SO good. Totally a car I'd never have seen such potential in from the get go but looks amazing now.:thumbs:

[nabs]

The car is slammed, lol, pictures seriously don't do it justice, you have to see it in person.

^^ duno why but just seems like you need a lil bit moar low

[mk1freak]

Yay or Nay?
if yay, what color :O
(not my car)
http://lh5.ggpht.com/_BmHMqeird10/TMvAxhZnf6I/AAAAAAAAAPw/Mz9nobGU0TQ/s800/IMG_4710.jpg

Yay, is the trim on the grill chrome? dip that as well

which hella hornset is that? most of the ones ive been looking at are red housing...:okay:
MK1Freak that looks SO good. Totally a car I'd never have seen such potential in from the get go but looks amazing now.:thumbs:
thanks bro, the lines on the car just work. Thank god Hyundai don't put out Ponies anymore, now they're putting out beasts, they just need a little fondling to bring out the wildside in them :ifyouknow: :fullofwin:

The car is slammed, lol, pictures seriously don't do it justice, you have to see it in person.
you sir are correct. speedbumps are not my friends. :okay:

[Grim]

Whoops is should be more clear.
Yay or nay to the hell horn :P

And u just paint thr cover urseld. Its detachable
Posted via RS Mobile

[jpark]

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/523513_235589189914664_399814822_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/15243_235588626581387_154356061_n.jpg

installed KDM badgeless grill and protect dipped the chrome hood trim with ASR.

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/59213_235579683248948_390704939_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn1/541415_235579653248951_2067712050_n.jpg

exhaust tips need polishing :okay:

looks gooooooooood
front lip and some black housed headlights would be gangster

[mk1freak]

it's still a work in progress. unfortunately all the stuff I want/need (lights, front/trunk lips and others) has to be ordered from Korea.... slowly saving $$ up and collecting them piece by piece. :D


Whoops is should be more clear.
Yay or nay to the hell horn :P

And u just paint thr cover urseld. Its detachable
Posted via RS Mobile
who can say no to hella horns? they look good keep them that color :D

[a00755836]

Looks good. Love how it shows the chrome alot surrounding the grill. VIP!!!

[boatcaptain]

change my brake fluid today :)

http://i17.photobucket.com/albums/b86/jc8899311/IMG_3845_zpsd5e0326b.jpg

[underscore]

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/523513_235589189914664_399814822_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/15243_235588626581387_154356061_n.jpg

installed KDM badgeless grill and protect dipped the chrome hood trim with ASR.

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/59213_235579683248948_390704939_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn1/541415_235579653248951_2067712050_n.jpg

exhaust tips need polishing :okay:



I hate to be the one to say it, but I kinda like the chrome better. The debadging looks great though.

[ilvtofu]

I hate to be the one to say it, but I kinda like the chrome better. The debadging looks great though.

+1 I think the chrome works better with the rest of the car and those wheels. Wheels are awesome btw

[TjAlmeida]

Got the heater core back into the Corolla and all looped back up and gave the GF the keys for the evening. So far no leaks so interior will be getting put back together tmrw!

http://i262.photobucket.com/albums/ii107/Ridge_Raiders/20130410_131823_zps8d8c43ee.jpg

http://i262.photobucket.com/albums/ii107/Ridge_Raiders/20130410_131838_zps548651c5.jpg

http://i262.photobucket.com/albums/ii107/Ridge_Raiders/20130410_131831_zps405ecff3.jpg

[Limitless]

Took apart my center console yet again and wrapped part of it in some 'pleather' fabric thing from Fabriccana to make the ipad seem a bit more presentable... Slowly figuring out tweaks here and there to make it look a bit better.
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn1/894065_10152716529390582_472317777_o.jpg

Also installed my TWM short shifter today with a friend, holy crap it look a lot longer than expected. Definitely worth it though :)
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-frc1/901396_10152716545485582_1294638561_o.jpg

[Grim]

^^^^ pleather easy to wrap & play with?

[Limitless]

Horrible around edges lol, or maybe because it was my first time trying to wrap with it :S Around just flat surfaces it's really easy

[BlueSedanRUS]

http://i46.tinypic.com/dqog91.jpg
OEM BBK:)) 13" from 11.2 and the rears are tiny bit bigger...

[mk1freak]

Horrible around edges lol, or maybe because it was my first time trying to wrap with it :S Around just flat surfaces it's really easy

you try hair dryer or heat gun approach?
Posted via RS Mobile

[bloodmack]

picked these up for 50$ on tuesday
http://i.imgur.com/hvp4GaM.jpg
Installed em today :fullofwin:
http://i.imgur.com/Y3YN61B.jpg
aftermarket vs oem
http://i.imgur.com/K1ZLfWI.jpg
before and after
http://i.imgur.com/WtiE80A.jpg
http://i.imgur.com/Fu2ZoJN.jpg

Not supa slammed, but definitely sexier! also pulled my silencer out. :P

[dared3vil0]

^ Oh, so that's the "investment" You speak of. :lawl:

[bloodmack]

haters gon' hate.

[Limitless]

you try hair dryer or heat gun approach?
Posted via RS Mobile

Nope, didn't treat it like vinyl and it didn't have adhesive on the back. Maybe I should have seen what it would be like to stretch it with a heatgun.. hm

[JackAss]

http://i33.photobucket.com/albums/d61/jacky1113/IMAG0207.jpg (http://s33.photobucket.com/user/jacky1113/media/IMAG0207.jpg.html)

[!e.lo_]

^what I got to replace my ARC Titanium, and I've kept it since. Good choice

[dink]

Changed oil and filter, using motul 8100 5L. paid $35 wooot!

[ApePee2]

made some metal shims for my hardtop latch :) no more rattles!
Posted via RS Mobile

[BBMme]

^
nice, makes driving so much better now. I've been spraying shit on my latches but it's only a temp fix=(

[BlueSedanRUS]

weight saving 85lb
http://i47.tinypic.com/rmu1bt.jpg
18000gvw AT cooler
http://i45.tinypic.com/2re4as8.jpg
Grounding kit
http://i46.tinypic.com/6p15he.jpg

[The_AK]

drove it, just like any other day lol

[dvst8]

registered and insured! spirited drive down hwy 1.

[Limitless]

Test fitting :) Sideskirts tomorrow

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn1/892103_10152722164120582_2046980879_o.jpg

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/901405_10152724507840582_110484434_o.jpg

No room in my garage to take an actual head on picture of the rear lol
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn1/905427_10152724510275582_594480370_o.jpg

So far it isn't too bad, looks like it fits fairly well actually.. None of the bolts were on in the pictures so that's why the edges are kinda sagging a bit. Kinda pissed off that this broke though, I just bought it a few weeks ago too and barely used it
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn1/902230_10152724527145582_2126677255_o.jpg

[JackAss]

Plasti dipped the front lip

http://i33.photobucket.com/albums/d61/jacky1113/IMAG0248.jpg (http://s33.photobucket.com/user/jacky1113/media/IMAG0248.jpg.html)

Test fit

http://i33.photobucket.com/albums/d61/jacky1113/IMAG0249.jpg (http://s33.photobucket.com/user/jacky1113/media/IMAG0249.jpg.html)
http://i33.photobucket.com/albums/d61/jacky1113/IMAG0250.jpg (http://s33.photobucket.com/user/jacky1113/media/IMAG0250.jpg.html)

[hk20000]

Took home a Miata. Goodbye Q45. Apparently it went to someone also on RS I will look forward to what he does with it.

meanwhile:
http://www.revscene.net/forums/members/hk20000/albums/1990-mazda-mx5-miata/4644-because-miata-always-answer.jpg

[TRD Rs200]

installed rear valance

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/579462_10152724019960274_880981104_n.jpg

[ApePee2]

^
nice, makes driving so much better now. I've been spraying shit on my latches but it's only a temp fix=(



i know what you mean, i've been putting mine off for a year or so. Try using some cut up rubber hoses on the latch hook.

[H.Specter]

full exterior and interior detail today brahs.

inb4 frozen hands.

[XplicitLuder]

didnt do much, but big ups to e.lo for helping me install the dash cam :fullofwin:

[BrRsn]

sat in it
started it
let it idle
played some music
turned it off


.... should probably re-insure it :okay:

[v_tec]

Test fitting :) Sideskirts tomorrow

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn1/892103_10152722164120582_2046980879_o.jpg


:tears: Can't wait to see the finish product!

[Limitless]

Last piece fits!
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-frc1/904494_10152727420370582_564545881_o.jpg

Just being held by tape lol it's not really staying up but fitment is better than I thought it would be :)
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn1/883917_10152727420360582_1638767535_o.jpg


And off to paint it goes, see you in a few days :D
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/892999_10152727420460582_714760540_o.jpg

[k2damax]

gave it a nice wash

[boibuddha]

Swapped out the DX Cluster for the Si Cluster :woot2:

Before:
http://img.photobucket.com/albums/v104/boibuddha/20130414_170706_zps6d29293c.jpg

After:
http://img.photobucket.com/albums/v104/boibuddha/20130414_170714_zpsc6ed50d3.jpg

No more guessing where my RPM is at :badpokerface:

[BlueSedanRUS]

Swapped out the DX Cluster for the Si Cluster :woot2:

Before:
http://img.photobucket.com/albums/v104/boibuddha/20130414_170706_zps6d29293c.jpg

After:
http://img.photobucket.com/albums/v104/boibuddha/20130414_170714_zpsc6ed50d3.jpg

No more guessing where my RPM is at :badpokerface:

How long did it take you to swap the gauges?

[!e.lo_]

Plasti dipped the front lip

http://i33.photobucket.com/albums/d61/jacky1113/IMAG0248.jpg (http://s33.photobucket.com/user/jacky1113/media/IMAG0248.jpg.html)

Test fit

http://i33.photobucket.com/albums/d61/jacky1113/IMAG0249.jpg (http://s33.photobucket.com/user/jacky1113/media/IMAG0249.jpg.html)
http://i33.photobucket.com/albums/d61/jacky1113/IMAG0250.jpg (http://s33.photobucket.com/user/jacky1113/media/IMAG0250.jpg.html)


I have a J's racing lip if you're interested :fullofwin:

[jing]

Posted via RS Mobile

[Fafine]

How long did it take you to swap the gauges?

should be just unhook old one, plug in one with tach,
so 5mins?

[fliptuner]

Yeah, 5-10 mins to swap the cluster.

Why didn't you use the old speedo with the correct/lower mileage?

[melloman]

Weekend consisted of:

Extended Studs in Rear
10mm Spacers in Rear
"Magazine-DIY" Rear Fender Pull
Open End Lugnuts
Yellow Fog Covers
Thule Fairing

[fliptuner]

Don't forget, it took 4 big Filipino's to get you wide enough to squat. :ifyouknow:

1000lbs in the rear :lawl:

[GabAlmighty]

I eye-fucked the shit out of it from the window and thought of all the things I need to do to it... Once i'm graduated here i'll attend to it.

[boibuddha]

How long did it take you to swap the gauges?

Took about half an hour for me because one of the electrical connectors wouldn't detach from the cluster shroud. (8 screws and 6 connectors)
Yeah, 5-10 mins to swap the cluster.

Why didn't you use the old speedo with the correct/lower mileage?

I will next weekend, I found a dead spot/bulb in my newly installed cluster. I was just too excited to have a tach and was running out of daylight.

[fliptuner]

Sweet. Yeah a couple of the connectors are a bitch to get off if they've never been removed. Make sure you plug it in and check the lights before to screw it back in for the last time.

[ApePee2]

Debagded :fullofwin:

Pardon the Samsung plug lol, was holding on to several things

http://www.freewebs.com/li3nn/s2000/DSC_0002.jpg

[hk20000]

cleaned it up really good. installed missing antenna. Changed wheels from 15" XXR to 13" ATL from Germany. Fixed passenger side door panel handle.

[Lomac]

Have the girlfriend's car (2005 Chevrolet Blazer) for a couple weeks while she's cruising around the Interior with mine. Had a new HU installed at Soundsgood, installed a new brushbar w/PIAA spotlights, replaced the calipers and installed new rotors and pads, put in a new fuel filter. Couple other things as well that I've forgotten about.

However, when I went to start it on Friday night to move it in order to replace her e-brake cables, it just kept on cranking and cranking without turning over. Did a few tests and determined her fuel pump died. Fuck.

So... spent this afternoon pulling the tank. Not a fun job, especially when it's never been done before and the entire underside is coating with two metric tons of rocks, dirt and sand. Anyway, this is where it's at while I wait for a new pump to get in.

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/901692_10151623025009289_1011124155_o.jpg

For the record, I am never, ever buying any GM vehicle made between the 90's and late 00's. They are such shit.

[dared3vil0]

For the record, I am never, ever buying any GM vehicle made between the 90's and late 00's. They are such shit.

I wouldn't buy a GM SUV/Truck without the 5.3/6.0/6.6 in it.

[!e.lo_]

not a fun job at all. hate pulling tank's out.

[fliptuner]

I said fuck it and cut a panel out of the rear floor of my K5. It took less time to modify the panel to screw back into place, than it would have to drop the tank.

You drove it down here on the shit breaks? lol

[Lomac]

Looking back, it actually wasn't that big of a job to pull the tank. Eight bolts for the shield and four for the straps. The bitch part was trying to disconnect the stupid squeeze clamps that hook up to the feeder and drain tubes on the pump itself. Ended up breaking two of the plastic tubes inside the clamps. Luckily the whole assembly is being replaced, so it wasn't that big of a deal. No, I imagine the real trouble is going to happen when the tank goes back in. There is one tube that I've no idea how I'm going to reattach and the filler neck is in a super awkward spot on these vehicles.

:okay:

Oh, and Ice... no, I swapped the brakes up in Salmon Arm before I drove it down to the Lower Mainland. I may be stupid, but I'm not suicidal. :p

[dared3vil0]

Looking back, it actually wasn't that big of a job to pull the tank. Eight bolts for the shield and four for the straps. The bitch part was trying to disconnect the stupid squeeze clamps that hook up to the feeder and drain tubes on the pump itself. Ended up breaking two of the plastic tubes inside the clamps. Luckily the whole assembly is being replaced, so it wasn't that big of a deal. No, I imagine the real trouble is going to happen when the tank goes back in. There is one tube that I've no idea how I'm going to reattach and the filler neck is in a super awkward spot on these vehicles.

:okay:

Oh, and Ice... no, I swapped the brakes up in Salmon Arm before I drove it down to the Lower Mainland. I may be stupid, but I'm not suicidal. :p

Seems like you got the short end of the stick, why'd she get your car?

[TRD Rs200]

installed rear valance

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/579462_10152724019960274_880981104_n.jpg

car is sold today :tears:

[Lomac]

Seems like you got the short end of the stick, why'd she get your car?

Better fuel mileage. She's currently driving from Salmon Arm to Kelowna and back every day for school. Plus I offered to repair a few things while I had the vehicle. Just didn't expect so much to go wrong with this thing :lol

[dared3vil0]

Better fuel mileage. She's currently driving from Salmon Arm to Kelowna and back every day for school. Plus I offered to repair a few things while I had the vehicle. Just didn't expect so much to go wrong with this thing :lol

~4 hour total commute a day... THAT must suck. Although those roads are rather fun...

[underscore]

^ not the highway.

[dared3vil0]

^ not the highway.

What?

[Lomac]

What?

Nah, he's right. Most of the drive between the two cities is pretty damn boring. However, there's a fantastic back road between Enderby and Armstrong that I freakin' love. I forget the name of it now but it's full of foot hill twisties. It's worth the extra five minutes added onto your trip driving that road.

[!e.lo_]

figured out electrical issue. had something loose causing cluster lights to intermit and the column light switch dinger to intermit.
audio deck also wasn't turning on. headlights hid flickering.
took about 5hours but fixed it all.

then made little brackets for something soon
http://i13.photobucket.com/albums/a267/aznebonix/IMG_2823_zpsd23ffc53.jpg

[underscore]

Nah, he's right. Most of the drive between the two cities is pretty damn boring. However, there's a fantastic back road between Enderby and Armstrong that I freakin' love. I forget the name of it now but it's full of foot hill twisties. It's worth the extra five minutes added onto your trip driving that road.

Canyon Road? If you haven't already, drive down Deep Creek Road from Salmon Arm to Armstrong one day, that's one of the best roads I've ever driven.

[Lomac]

Canyon Road? If you haven't already, drive down Deep Creek Road from Salmon Arm to Armstrong one day, that's one of the best roads I've ever driven.

Yup, Canyon Road. Not sure how that name slipped my mind. :lol

And yeah, I've come across Deep Creek Road . I got lost trying to find Gardom Lake and some how found that road. lol. Didn't get much of a chance to drive it but I'll definitely check it out the next time I head up there.

[Slow63]

http://i1073.photobucket.com/albums/w393/kjai63/IMG_3184_zps6ff29e39.jpg


Went to pick up my new trunk spoiler :woot2:

[ForeverYours]

Mounted sunroof/moonroof wind deflector

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-frc1/904047_321375161324166_1785094706_o.jpg

[jackp0t]

http://i1178.photobucket.com/albums/x374/jackp0t_/164DA7E8-F834-4052-8CC7-87BF1A858440-27829-000008D6B5BBBAF8.jpg (http://s1178.photobucket.com/user/jackp0t_/media/164DA7E8-F834-4052-8CC7-87BF1A858440-27829-000008D6B5BBBAF8.jpg.html)

went to icbc claim centre for comprehensive claim
a flying object hit the bumper and damage the carbon hood!

i thought i was gonna get screwed but
the estimator covered new paint on the front bumper and brand spanking new carbon fiber hood :fullofwin:
nice guy!

[jackp0t]

also did the blue light mod on the cluster
http://i1178.photobucket.com/albums/x374/jackp0t_/79F55299-B420-43AA-BC1C-017E97848183-27829-000008D97B0B7058.jpg (http://s1178.photobucket.com/user/jackp0t_/media/79F55299-B420-43AA-BC1C-017E97848183-27829-000008D97B0B7058.jpg.html)

http://i1178.photobucket.com/albums/x374/jackp0t_/E725BE16-507C-423A-BE5E-9390B183425D-27829-000008D6BAAB9FC6.jpg (http://s1178.photobucket.com/user/jackp0t_/media/E725BE16-507C-423A-BE5E-9390B183425D-27829-000008D6BAAB9FC6.jpg.html)

theres still a hint of green . FAIL

ill redo it next time lol

[dared3vil0]

also did the blue light mod on the cluster
theres still a hint of green . FAIL

ill redo it next time lol

Looks good to me...

[jackp0t]

thanks man
i wanted a more hint of blue than green
its kinda like teal now .lol
http://i1178.photobucket.com/albums/x374/jackp0t_/6CF88527-19C9-4EA1-BC6B-8E5F26CF2623-27829-000008DB7A85E097.jpg (http://s1178.photobucket.com/user/jackp0t_/media/6CF88527-19C9-4EA1-BC6B-8E5F26CF2623-27829-000008DB7A85E097.jpg.html)

[imp_squared]

http://i1178.photobucket.com/albums/x374/jackp0t_/164DA7E8-F834-4052-8CC7-87BF1A858440-27829-000008D6B5BBBAF8.jpg (http://s1178.photobucket.com/user/jackp0t_/media/164DA7E8-F834-4052-8CC7-87BF1A858440-27829-000008D6B5BBBAF8.jpg.html)

went to icbc claim centre for comprehensive claim
a flying object hit the bumper and damage the carbon hood!

i thought i was gonna get screwed but
the estimator covered new paint on the front bumper and brand spanking new carbon fiber hood :fullofwin:
nice guy!

this is the kingsway vancouver claim centre?
as I went there for my claim on my car a while back. they were good to me.
who was your estimator?

[jackp0t]

/\ its actually the newton claim centre in surrey
his name is Jim such a cool guy

[Marshall Placid]

also did the blue light mod on the cluster
http://i1178.photobucket.com/albums/x374/jackp0t_/79F55299-B420-43AA-BC1C-017E97848183-27829-000008D97B0B7058.jpg (http://s1178.photobucket.com/user/jackp0t_/media/79F55299-B420-43AA-BC1C-017E97848183-27829-000008D97B0B7058.jpg.html)

http://i1178.photobucket.com/albums/x374/jackp0t_/E725BE16-507C-423A-BE5E-9390B183425D-27829-000008D6BAAB9FC6.jpg (http://s1178.photobucket.com/user/jackp0t_/media/E725BE16-507C-423A-BE5E-9390B183425D-27829-000008D6BAAB9FC6.jpg.html)

theres still a hint of green . FAIL

ill redo it next time lol

The new panel looks great. The colour scheme matches perfectly.

Nicely done.

[imp_squared]

/\ its actually the newton claim centre in surrey
his name is Jim such a cool guy

seems the claim centres look alike. same designer? lol

[!e.lo_]

Drove it. Aircared. Enjoyed it.
Posted via RS Mobile

[mk1freak]

Drove it. Aircared. Enjoyed it.
Posted via RS Mobile

pics or it didn't happen :pokerface: :lawl:

[!e.lo_]

pics or it didn't happen :pokerface: :lawl:

http://i13.photobucket.com/albums/a267/aznebonix/IMG_2828_zps1b403ca1.jpg

[fliptuner]

Is it all ready for the season?

[!e.lo_]

nope. missing a big piece

[MindBomber]

nope. missing a big piece

No one likes a tease.

You're worse than a hot, provocatively dressed blonde who doesn't put out right now.

What's the big piece?!?!

[88SupraT]

Guessing by the look/theme of !e.lo's teg I'd say he's missing a big wing :awwyeah:

[!e.lo_]

Guessing by the look/theme of !e.lo's teg I'd say he's missing a big wing :awwyeah:

haha you always know man

[JackAss]

got new tires finally...

http://i33.photobucket.com/albums/d61/jacky1113/IMAG0260.jpg (http://s33.photobucket.com/user/jacky1113/media/IMAG0260.jpg.html)

[dared3vil0]

got new tires finally...

http://i33.photobucket.com/albums/d61/jacky1113/IMAG0260.jpg (http://s33.photobucket.com/user/jacky1113/media/IMAG0260.jpg.html)

General G-Max A/S 03?

[JackAss]

General G-Max A/S 03?

Yup....

[dared3vil0]

^ Good choice.

[Spectre_Cdn]

^+1 :fullofwin:

[Lomac]

Have the girlfriend's car (2005 Chevrolet Blazer) for a couple weeks while she's cruising around the Interior with mine. Had a new HU installed at Soundsgood, installed a new brushbar w/PIAA spotlights, replaced the calipers and installed new rotors and pads, put in a new fuel filter. Couple other things as well that I've forgotten about.

However, when I went to start it on Friday night to move it in order to replace her e-brake cables, it just kept on cranking and cranking without turning over. Did a few tests and determined her fuel pump died. Fuck.

So... spent this afternoon pulling the tank. Not a fun job, especially when it's never been done before and the entire underside is coating with two metric tons of rocks, dirt and sand. Anyway, this is where it's at while I wait for a new pump to get in.

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/901692_10151623025009289_1011124155_o.jpg

For the record, I am never, ever buying any GM vehicle made between the 90's and late 00's. They are such shit.

Swapped in a new ACDelco fuel pump and reinstalled everything today.

In the pouring rain.

It fucking sucked.

[Akinari]

Broke my passenger side seat rail plastic side cover while trying to take out the floormat to clean it :facepalm: snapped one of the clips right off.

[westopher]

Took off all the front end trim so take it in for paint:fullofwin:
http://i99.photobucket.com/albums/l308/westopher2006/3A0079A4-AB37-4420-975D-66D2261D9537-7886-000004C28C49A94F_zpsdf54a7ce.jpg (http://s99.photobucket.com/user/westopher2006/media/3A0079A4-AB37-4420-975D-66D2261D9537-7886-000004C28C49A94F_zpsdf54a7ce.jpg.html)

[underscore]

cut openings in the hatch plastics and finished installing my rear strut bar.

[ForeverYours]

Cleaned off dash area, removed the instrument cluster, removed car battery (will be getting a replacement inside soon)


Coilovers and drilled/slotted rotors are going to be installed in the next couple days when the weather clears

Teaser photoshopped picture :badpokerface:
https://dl.dropboxusercontent.com/u/64316344/Car/Yakuza.png

[dared3vil0]

Took off all the front end trim so take it in for paint:fullofwin:
http://i99.photobucket.com/albums/l308/westopher2006/3A0079A4-AB37-4420-975D-66D2261D9537-7886-000004C28C49A94F_zpsdf54a7ce.jpg (http://s99.photobucket.com/user/westopher2006/media/3A0079A4-AB37-4420-975D-66D2261D9537-7886-000004C28C49A94F_zpsdf54a7ce.jpg.html)

I thought you were/are selling it? :suspicious:

[SpuGen]

Washed it.
Then it rained (2 days ago)

Today.
Washed it.
And now it's raining.

Fml.

[westopher]

I thought you were/are selling it? :suspicious:

No one wants to buy a car that looks like shit. I'm in no hurry anyway. Might as well look decent for however long I keep driving it.
Posted via RS Mobile

[Nicotine]

http://i105.photobucket.com/albums/m205/nicolaspal/A8B2572A-CAB5-4D38-8227-C4F8EC4EAF33-1598-0000023E6FD2DCEB_zps802379c8.jpg (http://s105.photobucket.com/user/nicolaspal/media/A8B2572A-CAB5-4D38-8227-C4F8EC4EAF33-1598-0000023E6FD2DCEB_zps802379c8.jpg.html)
quick plate relocate

[jackal]

http://i105.photobucket.com/albums/m205/nicolaspal/A8B2572A-CAB5-4D38-8227-C4F8EC4EAF33-1598-0000023E6FD2DCEB_zps802379c8.jpg (http://s105.photobucket.com/user/nicolaspal/media/A8B2572A-CAB5-4D38-8227-C4F8EC4EAF33-1598-0000023E6FD2DCEB_zps802379c8.jpg.html)
quick plate relocate

really?:rukidding:

so now you have a weird license plate shaped bump and some holes in the middle of your bumper.

[bing]

posted in wrong thread...

[VRYALT3R3D]

Put a deposit on this.....

http://i.imgur.com/UDc6FRM.jpg

Just a teaser shot for now :)

Inspecting it in person next week, if all goes well it will be in my driveway :D

[BrRsn]

Put a deposit on this.....

http://i.imgur.com/UDc6FRM.jpg

Just a teaser shot for now :)

Inspecting it in person next week, if all goes well it will be in my driveway :D

Z06? :fullofwin:

[VRYALT3R3D]

Z06? :fullofwin:
Maybe, maybe not...

I guess you will have to wait and see :D

[BrRsn]

http://image.corvettefever.com/f/35211075+w750+st0/corp_0801_06_z+2004_chevrolet_corvette_z06+gauge_c luster.jpg

:troll:

edit: NVM you win.. not a z06 :okay:

[ilvtofu]

Z06 doesn't need a boost gauge! could it be... :fullofwin:

[Ohkun]

Picked up new tires :D

[dark0821]

after 192 XXX KM, it was finally time for....

a stock OEM replacement clutch....

http://i.imgur.com/AMHTC0o.jpg

[Sean Hebdon]

Spring cleaning, vacuum, wash and wax!

[!e.lo_]

http://imageshack.us/a/img198/8779/imagekvx.jpg
Posted via RS Mobile

[TjAlmeida]

Replaced a caliper and master cylinder reservoir. then did a complete brake flush again.

Finished just before the rain :concentrate:

[Nicotine]

really?:rukidding:

so now you have a weird license plate shaped bump and some holes in the middle of your bumper.

http://media.tumblr.com/tumblr_lf0z0b7Dgj1qasc93.gif

[dink]

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash3/65608_10151562573258522_2109867449_n.jpg

[nabs]

IceBoy changed my tyres, now they are all the same :)

thx again!