[belaud]

You're going to scrape the fuck out of the lip anyways, because race car.

[jpark]

which bodyshop did you go for that lip? its not a little, but quite off. i'd be pretty dissapointed to be honest lol

[k3lv]

finally added some of that home depot lip to my car, been bottoming out everywhere and its a sad sight when my car goes on the hoist @the speed syndicate.

[tofu1413]

In the sunlight it looks fine, when it's dark and under street lighting it's OBVIOUS. just like a few other panels on my car... :okay:

would spartan kick the shop for crappy paint blending

[PDKGD3]

would spartan kick the shop for crappy paint blending

It was free :fuckthatshit:
Dropped off the lip and drove away. Took the paint code straight off the car door jam too, so.... DGAF

[tofu1413]

better off black imo :fuckthatshit:

[badboy]

some a-hole scraped my rear fender at work so i took it to the dealership and got buffered out free. its hardly there anymore. I'm happy :)

[Peturbo]

Picked up my wheels from greens today. New work meister stickers just came in mail as well.
Put some paint sealant on my rims, put the new stickers on them, then slapped wheels back on my car.

[tofu1413]

finally made the car sound like a proper V8.


in that case, working on growing a mullet and a mustache.

[belaud]

Partied on a Dyno.

Birthday treat to myself! :alonehappy:

[Fafine]

Partied on a Dyno.

Birthday treat to myself! :alonehappy:

hbd!

[belaud]

Thanks!

Now if only facebook wasn't so broken, I could post the damn ear deafening video...

yay

[Taxmonkey]

I rinsed my car down today :alonehappy:

[Akinari]

Fixed the damn faulty HVAC blower motor. Basically it's located behind the cabin air filters in the glove box. Literally just punched the module a few times and started working again, something probably got jammed inside :suspicious:

[belaud]

Herp derp, better on youtube

http://youtu.be/_8W2pwNwpYc

[gloors]

Raised my 240 for my Cali road trip + taped up the whole front end don't want em nasty bugs on my new paint

[Paradise240]

Went to wash my car, then this happened. :rukidding:

[belaud]

LOOOL, the sky is helping you wash the car :joy:

"gaw teen do bong lei sao"

[OGCStrike]

^ur car sounds so good.:sweetjesus:
planning to put a BOV on?

[ts14]

mother nature jus helpin out :troll:

[belaud]

^ur car sounds so good.:sweetjesus:
planning to put a BOV on?


BOV... :fuckthatshit:

[OGCStrike]

planning to stay stock, no? :ilied:

[UnName]

replaced master and slave clutch cylinders 3 hours well spent

[Paradise240]

At least I didn't have to use the hose to rinse off the soap
:alonehappy:

Crazy weather today, at least it wasn't last night! :fullofwin:

[XplicitLuder]

did this yesterday...35% tint all around, now just waiting for coils to come in :ilied:

http://i605.photobucket.com/albums/tt135/fockarized/IMG-20120601-00483.jpg

[heleu]

Cleaned my exhaust tips (http://blue-sun.net/Details/HowTo/):

I didn't have any microfibre cloth, but the steel wool definitely made it shinier...

[Marcosf]

Cleaned my exhaust tips (http://blue-sun.net/Details/HowTo/):

I didn't have any microfibre cloth, but the steel wool definitely made it shinier...

ya i use an sos pad, if u do it very lightly it works like a charm

[Leopold Stotch]

Herp derp, better on youtube

STI Dyno - YouTube (http://youtu.be/_8W2pwNwpYc)

lol it's so 'laud' what does the muffler do? :fullofwin:

[swfk]

Went to Ikea and bought some snakes to make a snake pit out of my ashtray. Enhanced security system :accepted:

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash3/532703_10150873004932939_1882775180_n.jpg

[Krovi]

Went to Ikea and bought some snakes to make a snake pit out of my ashtray. Enhanced security system :accepted:

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash3/532703_10150873004932939_1882775180_n.jpg

Best mod ever.

[spoon.ek9]

Wire brushed and flat blacked the drums on my EF because i was sick of looking at the rust. Did a shitty job but it still looks better than before :concentrate:

[swfk]

Best mod ever.

I know right? Best mod under $5!

[TRD Rs200]

before...

http://images.craigslist.org/5Ff5H15J73K43M73Lac5r6b0ae0647cee1d54.jpg

After...

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/537513_10151789712585274_1469360394_n.jpg

[mb_]

Finally changed my air filter after months of procrastinating :alonehappy: :fuckyea:

http://i.imgur.com/ADHMw.jpg

Power gains 20HP :troll:

[Akinari]

Finished off my ghetto DIY short ram intake with a piece of dryer duct from Home Depot. Cut off a small piece of the front airdam behind the upper grille allowing more air to enter the dryer duct.

Strangely enough, the dryer duct actually makes the intake system louder lol.

http://farm8.staticflickr.com/7092/7337930886_8a01180c66_b.jpg
http://farm9.staticflickr.com/8160/7337927484_d6a659457c_b.jpg

View from the front
http://farm8.staticflickr.com/7082/7337922992_335601bf5b_b.jpg
http://farm9.staticflickr.com/8024/7337918780_5de2983ed4_b.jpg

This is as ghetto as it gets. I'm itching to just rip the entire airbox out, buy some Spectre intake pipes and stick on a cone filter at the end.

EDIT: For those who are wondering, ripping out the stock resonator does make a difference in acceleration and throttle response, however more so in the higher rpms and at WOT. Can't feel any feasible difference during normal driving.

[OGCStrike]

^ how does it look from the front view of the car?
would there be evidence of the ghetto short ram? XD

[Akinari]

If you look closely through the front of the upper grille, you can see it, as I cut out a piece of the airdam behind that grille to allow more airflow.

http://farm8.staticflickr.com/7099/7338883086_5a69ae4420_b.jpg

But why would anyone look for it anyway lol :okay:

[godwin]

EDIT: For those who are wondering, ripping out the stock resonator does make a difference in acceleration and throttle response, however more so in the higher rpms and at WOT. Can't feel any feasible difference during normal driving.

Since the tube itself is not smooth, it will introduce a lot of turbulence.. What you can notice is probably just your imagination. Try to keep the metal from touching any other metal parts like your battery post.. you don't want have other things corrode because you thought putting cheap non automotive things into the engine compartment is a good idea.

[firebird79_00]

Got my Ashtray in and sanded the rust and ugly chipped paint off my springs and repainted them

http://i589.photobucket.com/albums/ss336/firebird79_00/001-105.jpg
http://i589.photobucket.com/albums/ss336/firebird79_00/003-99.jpg

[Gh0stRider]

noticed paw marks all over my car. so there was cat stuck in my garage for several days.

finally found it but it got away, so couldn't cook it for dinner.

my car got raped by the cat :fuuuuu:

[belaud]

You need new seats firebird :concentrate:


lol it's so 'laud' what does the muffler do? :fullofwin:

Its there to avoid VI's :derp:

[firebird79_00]

You need new seats firebird :concentrate:


Meh theyre good enough for now, im only had the mustang since May 11th and tires are a bit more of a priority.

[Akinari]

Since the tube itself is not smooth, it will introduce a lot of turbulence.. What you can notice is probably just your imagination. Try to keep the metal from touching any other metal parts like your battery post.. you don't want have other things corrode because you thought putting cheap non automotive things into the engine compartment is a good idea.
The dryer duct itself isn't directly connected to that plastic intake snorkel, it simply guides air in. My setup without the dryer duct can be seen a couple posts back.

[LP700-4]

Meh theyre good enough for now, im only had the mustang since May 11th and tires are a bit more of a priority.

Use a bottle of leather conditioner and some leather dye if nothing else, makes a big difference!

[belaud]

I don't think those earthquake cracks are going to come out LP :pokerface:

[TopsyCrett]

Bavarian autosport strutbar install on my 635csi. Quality is alright...

http://i201.photobucket.com/albums/aa296/lgarciacb7/strutbar.png

[LP700-4]

I don't think those earthquake cracks are going to come out LP :pokerface:

I dont think so either, it will make the cracks look less visible though! :alonehappy:

[HondaGuy]

Went to Ikea and bought some snakes to make a snake pit out of my ashtray. Enhanced security system :accepted:

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash3/532703_10150873004932939_1882775180_n.jpg



Dude, I'm loving those snakes lol... Cool mod.

I got something similar too...will post pics soon...

[swfk]

Dude, I'm loving those snakes lol... Cool mod.

I got something similar too...will post pics soon...

Thanks lol. I plugged my dashcam in the outlet next to the ash tray next to the ash tray so my ashtray door is just wide open. Strolled through Ikea the other day with GF and decided to make a snake pit to fill up the space. Plush polar bears, snakes, dogs, mooses looked adorable lol only $0.79 each!

[SumAznGuy]

The dryer duct itself isn't directly connected to that plastic intake snorkel, it simply guides air in. My setup without the dryer duct can be seen a couple posts back.

What Godwin is talking about is the fact that after the air filter is still the stock rubber piping which causes turbulent air going into the motor.
Remember, when you are driving, there is plenty of cool air flowing through the engine bay.
Like a pipe organ, a properly tuned CAI is velocity tuned so that the mendrel bend piping will smooth out the air going into the motor.

[TypeRNammer]

changed the oil on my mom's CR-V!

man the filter was a bitch to get to

I agree

:rukidding:

[Harvey Specter]

Gave my car a quick wax:

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/380334_10151820845115175_2015844080_n.jpg

Add black sticker decals to the BMW emblems and also covered the side reflector with black vinyl. I find using an inlay is better because I might have to remove it.

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/576689_10151820844945175_750190174_25091881_778456 50_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/544692_10151820844500175_1288700627_n.jpg

[Paradise240]

Decided to try a new look, the "hellasunk" look.
http://i136.photobucket.com/albums/q195/xmodslife/45448711.jpg

Woke up yesterday morning to a flat tire, swapped it out for my donut, which just happened to be flat as well :okay:
http://i136.photobucket.com/albums/q195/xmodslife/45448710.jpg
Then my friend came to the rescue and lent me a full size spare he had laying around :fullofwin:
http://i136.photobucket.com/albums/q195/xmodslife/45448713.jpg

[dhari]

PlastiDipped my wheels. It didn't take too long and I think it looks pretty good. Eventually I will get them powdercoated.

11954

11953

[Glove]

almost done installing my cage

http://img502.imageshack.us/img502/7962/img0775tu.jpg

[sonick]

Put in speed bleeders and bled my brakes :alone:

[nguyen]

Installed a new actuator and brake pads :D feels good

[Spectre_Cdn]

changed the tranny fluid and oil in the accord.

[SumAznGuy]

Just got a bunch of goodies in. ASR 32 mm rear swaybar, Hawk HP+ front and rear pads, new OEM style rotors, speed bleeders.
And my OEM bushings from Honda has been shipped and should be here this week so I can get them installed and then do an alignment and get the car ready for Packwood.

[MK-EK]

Just got a bunch of goodies in. ASR 32 mm rear swaybar, Hawk HP+ front and rear pads, new OEM style rotors, speed bleeders.
And my OEM bushings from Honda has been shipped and should be here this week so I can get them installed and then do an alignment and get the car ready for Packwood.

Hawk HP+ i run them too .... but they squeeeeel!:fullofwin:

[jing]

Murphy's law took effect while I was swapping my Blackvue from my beater to my new car. Got distracted while doing so and was playing around with the touch-up paint pen and proceeded to spill some of the paint on my shorts and passenger seat. Shorts I don't care about but my seat... sure they're stock seats but interior was nearly flawless until I fcked it up. Now there's a 1" wide red paint stain on it but strangely enough it looks like a heart. Made my gay car even gayer.. :okay:

[Kaolinite]

http://i.imgur.com/vtfTI.jpg

painted the grill black.. broke the STI badge clips in the process =[

[firebird79_00]

Painted the coolant hose, brace and shock caps. The red actually is quite a bit darker and has a metallic flake in it. Camera couldnt pic it up
http://i589.photobucket.com/albums/ss336/firebird79_00/002-106.jpg

[lowda9]

Did thermostat a few days ago on the integra.

[Volvo-brickster]

http://i47.tinypic.com/33elpua.jpg

http://i45.tinypic.com/elbgia.jpg

http://i50.tinypic.com/nn15dt.jpg

http://i50.tinypic.com/2njvytf.jpg


rotors, pads and pins on the front

quoted 4-4.5 hours by a few shops
did it myself a bit under 4 hours :D

[Vancouver_M5]

I agree

:rukidding:

Changed my engine and transmission mounts, its like a completely different car now

[snails]

putting the new wheel on my ef, polished, painted and new hardware ;) ps just holding the wheel above the hub

http://i1154.photobucket.com/albums/p531/langleychrysler/81395795.jpg

[Harvey Specter]

Waiting to pick up my car from the dealer, had the following mods done;

-Front Alpina lip spoiler install.
-Dinan stage 1 upgrade for the 750i which will give the following;
Stock: 407 hp Dinan: 495 hp
Stock: 442 lb/ft Dinan: 573 lb/ft

Will post pictures later.

[belaud]

100 horsies from a re-tune?! jesus, those things must come super conservative

[Harvey Specter]

100 horsies from a re-tune?! jesus, those things must come super conservative

There's also a stage 2 which bumps it up to 501 hp and 580 ft/lb.

[dhari]

Waiting to pick up my car from the dealer, had the following mods done;

-Front Alpina lip spoiler install.
-Dinan stage 1 upgrade for the 750i which will give the following;
Stock: 407 hp Dinan: 495 hp
Stock: 442 lb/ft Dinan: 573 lb/ft

Will post pictures later.

:fullofwin::fullofwin::fullofwin::fullofwin:

[CharlieH]

100 horsies from a re-tune?! jesus, those things must come super conservative

2 turbos and a 4.4 v8 will respond pretty damn well to any mod lol

[SumAznGuy]

Installed HP+ pads on both F+R as well as flushed the brakes and installed speed bleeders.
Attempted to install my ASR rear swaybar but managed to GG'd one of the mounts so I will have to fix that when I have free time.
I also GG'd one of the tires, but lucky for me I was gonna swap tires in preparation for next weekend's autoX.

[Harvey Specter]

Picked up my car today, my buddy Mike L @ Autowest did the paint/install. Spoiler really transforms the awful front end of the 750i, I went with the Alpina lip because the m sport bumper didn't make money sense.

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-prn1/550544_10151867487820175_741681720_n.jpg

[accordpoop]

http://i47.tinypic.com/33elpua.jpg

http://i45.tinypic.com/elbgia.jpg

http://i50.tinypic.com/nn15dt.jpg

http://i50.tinypic.com/2njvytf.jpg


rotors, pads and pins on the front

quoted 4-4.5 hours by a few shops
did it myself a bit under 4 hours :D

Qx4/old pathfinder front brakes?? Those are a pita to do...good job!

[hal0g0dv2]

Picked up my car today, my buddy Mike L @ Autowest did the paint/install. Spoiler really transforms the awful front end of the 750i, I went with the Alpina lip because the m sport bumper didn't make money sense.

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-prn1/550544_10151867487820175_741681720_n.jpg

so sickkkkk

[yingyu_subaru]

Got a new car for my girlfirend. Hardwire one Blackvue dr400g HD dash camera for her baby.
http://farm6.staticflickr.com/5338/7429714666_7cb5a8717c_c.jpg

[belaud]

Evoque...ballerrr

[extracrunchie]

http://farm8.staticflickr.com/7189/6923305992_b40fc80d00_c.jpg

Stiffed it up!

[IMASA]

Installed rear camber arms on the speed3

http://farm9.staticflickr.com/8004/7435648976_e76d86b989.jpg

[Over9K]

No spherical bushings? what the hell man.

[Paradise240]

Jacked up my car, and got under it to find the rear main seal is leaking. Topped up a quart of oil, then my grandpa didn't know I did and he adds another 0.6quarts and now I just finished draining it out. Then celebrated with a car wash :alonehappy:

:okay:

[firebird79_00]

Drove it home from Pentiction and worked out the gas mileage, getting 25.1 MPG HWY. Not bad for a 4.6L V8

[skylinergtr]

replaced all the bulbs in my tail lights.

1 failed last week, another failed yesterday.

time to change them ALL!

[AW607]

Got a new car for my girlfirend. Hardwire one Blackvue dr400g HD dash camera for her baby.


Shit dude you bought an Evoque for your girlfriend? Ballin' outta control

I got some bronze for my car.

http://i45.tinypic.com/2nk6zk3.jpg

Almost there...

[kakucaekz]

Thoroughly cleaned the rear wheels, was gonna do all 4 but got lazy lol.

Front, dirty as heck:

http://i282.photobucket.com/albums/kk262/RDazr/Toyota%20MR2/DSC01167.jpg

Rear, shinyyy :D Still want some nice aftermarket wheels though :okay:

http://i282.photobucket.com/albums/kk262/RDazr/Toyota%20MR2/DSC01166.jpg

Oh, and went to get a wheel brush from Canadian Tire, came back out to a shopping cart against my car. Knicked part of the door handle bezel, sosad :(

Edit: why do those pictures make my car look like it's 4x4 status, it's decently dropped :suspicious:

[fliptuner]

you need to lose the clamp on weights

[belaud]

waxed the shit out of my car....still have the left side to do, 4 hours in :okay:

[kakucaekz]

you need to lose the clamp on weights

I know, they're ugly =\

[falcon]

Installed a new 3" SS exhaust I had built. Time to hit the dyno again.

[fliptuner]

I know, they're ugly =\

They do take away from the look of the wheel but more importantly, they trap brake dust, grime and moisture and promote corrosion

[Akinari]

Finally fixed the HVAC fan/motor unit. It was making obnoxiously unbearable clicking and whirring noises, along with the fan itself cutting in and out. My guess was just dust and particles getting into the motor or the bearings or some sorcery. However when I took it out, it looked rather clean to me.

It was an easy fix, but the unit itself was a bitch to get to. Beneath the glovebox/above the passenger footwell. Unclipped a large black plastic piece, three screws on the unit, while having my head essentially resting on the floormat looking upside down :pokerface:

Clicking noise and low fan speed is gone, but the whirring is still there. Probably going to order a new HVAC fan/motor unit.

[Taxmonkey]

Foglights IN!

Before!
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash3/539386_10150987767269250_223206329_n.jpg


After!
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash3/521928_10150987751674250_1546963989_n.jpg

[Volvo-brickster]

Qx4/old pathfinder front brakes?? Those are a pita to do...good job!

Good eye

'99 pathfinder

everything was good to go until i realized a wheel stud was stripped

had to remove everything, pound it out , replace and then redo :failed:

[belaud]

Want to sell me your fog light covers Donald?

[anti-vip]

replaced my ruckus exhaust to a louder yoshi one....:fullofwin:
http://i47.tinypic.com/9fv9c3.jpg

[bikerx]

^ any more pics of ruckus? :p

[bensta]

put my silver sideskirts on finally (had black and a weird blue/silver shade before) and sanded my plenum on my intake to get prepped for polish.

it sure is a pain in the ass to sand away scratches/casting marks in metal to make it look pretty... but damn, its worth it

http://i11.photobucket.com/albums/a154/bensta/IMG-20120626-00103.jpg
thats before polish.. ill get some pics after polish

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/384176_10150372201567712_236870042_n.jpg
before matching skirts, u can see the off color
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/529401_10150923150062712_1764636366_n.jpg
after

[- kT]

changing my cabin air filter after work :D

[jing]

Hit and run on my front bumper yesterday afternoon. Asshole scratched it up but luckily it's not too noticeable and I should be able to hide most of it with a decent polish

[Taxmonkey]

Want to sell me your fog light covers Donald?

Do you intend on removing your fog lights?

[belaud]

Yes, for summer, and have them back in for winter.

[skylinergtr]

on my 5 series:

I was having a small rough idle (just on idle).

I was curiously looking around the engine bay and noticed something was off, and my EGR air pump was basically off its mounting bracket and somewhat dangling. Luckily it never hit the floor and get hit or anything.

Ordered some new rubber mounts to attach the air pump to its bracket (3 small mounts @ $21 each - ouch!). I needed a new EGR hose too, as the old one was basically disintegrated.

issue is fixed, and running smoothly for now :) Also my odometer rolled past 200,000kms.

[mb_]

You know when you're looking for something but you find something else that you've been looking for ages ago? Yeah that's what happened here.

http://i.imgur.com/zyRJh.jpg

The T broke lol :okay:

[Harvey Specter]

Got my car tinted.

[AW607]

Finally got my 2-way alarm remote replacements in today, additional $30 for labour :okay: but worth it

[westopher]

Got my deductible waived, by catching the fuck who hit and ran my car! Body work time. :fullofwin: Since its gonna be in the shop and needs to get panels blended, I can pull the fenders FINALLY.

[Everymans]

I figured out I had a radiator leak. Requested a qoute for a used radiator from a few spots since I can't locate the leak. I also adjusted the air intake. Seems there was a leak.

[yogenfruz]

Fresh oil thrown in. Nothing special. Also found out a speaker is blown last night, gonna get that fixed when I get some money.

[Akinari]

:fullofwin:

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/292349_10150931584848823_397764636_n.jpg

And clearcoat waxed with Turtle Wax ICE. I love this stuff.

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/426810_10150931584938823_1575550262_n.jpg

[kyleyap]

thats a sick bike

[k3lv]

Thule roof rack installed, off to whistler for the long weekend!

[westopher]

going biking? I'm heading up snowboarding tomorrow morning.

[boibuddha]

Over the last week I've done the following:

1) DIY taillight gaskets:

Old:
http://img.photobucket.com/albums/v104/boibuddha/20120621_112005.jpg
http://img.photobucket.com/albums/v104/boibuddha/20120621_111950.jpg

New: (Doubled up because the foam was thin, put a bead of silicone where the gasket touched the taillight)
http://img.photobucket.com/albums/v104/boibuddha/20120621_114453.jpg

2) Cleaned up door/hatch jams of crap and mildew:
Before
http://img.photobucket.com/albums/v104/boibuddha/20120621_122434.jpg

After:
http://img.photobucket.com/albums/v104/boibuddha/20120621_151934.jpg
http://img.photobucket.com/albums/v104/boibuddha/20120621_122416.jpg

3) Repaint wiper arms:
Before
http://img.photobucket.com/albums/v104/boibuddha/20120625_131955-1.jpg
Checkout that corrosion!!
http://img.photobucket.com/albums/v104/boibuddha/20120625_203016-1.jpg

After
http://img.photobucket.com/albums/v104/boibuddha/20120625_213710-1.jpg

4) Plasti-dipped side moldings and front lip:
Before
http://img.photobucket.com/albums/v104/boibuddha/20120626_183617.jpg
http://img.photobucket.com/albums/v104/boibuddha/20120629_133132.jpg

After
http://img.photobucket.com/albums/v104/boibuddha/20120629_133213.jpg
http://img.photobucket.com/albums/v104/boibuddha/20120629_154033.jpg

Sorry for the large pictures...

[Rikaro]

^
the little bit counts. I used to do that to my civic haha

[AVS_Racing]

installed 25mm spacers for more hella flush fitment :notbad:

[Over9K]

Finally changed my air filter after months of procrastinating :alonehappy: :fuckyea:

http://i.imgur.com/ADHMw.jpg

Power gains 20HP :troll:

Both look clean to me...

[mb_]

^Old filter looked SUPER DIRTY in person

[skylinergtr]

i did spark plugs!

OEM Copper plugs

http://i19.photobucket.com/albums/b173/skylinergtr/IMG_1970.jpg?t=1341006655

Out comes Platnium +4's that I mistakenly put in the car years ago, but it still never skipped a beat.

http://i19.photobucket.com/albums/b173/skylinergtr/IMG_1973.jpg?t=1341006923

they all pretty much looked the same:

http://i19.photobucket.com/albums/b173/skylinergtr/IMG_1975.jpg?t=1341006929

[88SupraT]

Removed my fog lights today... Planning on running my oil cooler behind one of the openings for max air flow.

http://i56.photobucket.com/albums/g180/turbo_1234/IMG_0933.jpg

[firebird79_00]

New windshield wipers, sad how i still need them

[busdriverman]

proved that you can have the top down in the rain and stay dry if you maintain a certain speed. for this particular case, it was around 60km/h

[mb_]

^jpark is the top down in the rain driving specialist

[westopher]

cleaned most of the goo off of my windows from the tint. Still the hatch to do:okay:

[q0192837465]

Lol, I should try driving with the roof down in the rain sometimes. But what if u hit a red light?

[cressydrift]

Built my coilovers for la rolla...
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/323143_10150880511540951_1408654384_o.jpg

No camber plates just used NCRA's. Should give me -4 to -5 degrees of camber.

[jasonturbo]

Removed 5 window tint..

Before:
http://i32.photobucket.com/albums/d16/jasonturbo/photo-1.jpg

After:
http://i32.photobucket.com/albums/d16/jasonturbo/M3tint.jpg
http://i32.photobucket.com/albums/d16/jasonturbo/M3Rear.jpg

Paint to follow, among other things (Can't wait to scrap the tinted tails!!!).... Looking forward to the August meet :)

[asr]

Hardwired Escort 8500 X50 for my ride.
http://farm8.staticflickr.com/7261/7497432470_ef5ed0a6fd.jpg

[Jas29]

Changed the oil and rotated the tires on the accord

needs new engine mounts :considered:

[EX-R]

changed the clutch today.... im ready to pass out

http://i32.photobucket.com/albums/d19/ill_nometry/IMG_2594.jpg

[freakshow]

Just finished an oil change on the new addition to the family.

https://dl.dropbox.com/u/1702713/Pictures/SL/010.JPG

[Akinari]

Washed and waxed :alonehappy:

[Cereal Killer]

Washed, vacuumed, and applied a new 'Vancouver Subaru Club' decal :woot2:

[ts14]

Open headers on the accord :troll:

[Gh0stRider]

charging my battery since it died after not driving my car for 3 weeks.

[Fafine]

Open headers on the accord :troll:

That's stupid loud. Had that for a week and it was annoying haha

[Recon604]

washed my car! summers finally here

[kyleyap]

fixed up some rust spots and undercoated my wheel wells

[AW607]

didn't drive it for a good portion of the day and decided to ride a bike instead

[MG1]

Well, I finally bit the bullet and ordered a BlackVue 400. It came to door in three days flat. Anyway, I also ordered a second set of power plug and holder for other vehicle.

Thing of beauty as I have the video out connected to the Navs of both vehicles.

Haven't done the hard wire yet, but that is the easy part.

Oh yeah........ before the dash cam, I installed CB radios in both cars. Compete with external PA speakers, LOL. Why? Because I can..........

[sonick]

MG's gonna go cruising and make pervy old-man catcalls to all the LG's in short shorts downtown.

[AVS_Racing]

hit VTEC + cleaned leather today, washed partially clayed and wax yesterday

[MG1]

MG's gonna go cruising and make pervy old-man catcalls to all the LG's in short shorts downtown.

Not really, but today, the neighbour's hot 26 year old daughter was out washing the family SUV. She was up on a stool and she was getting the front of her T-shirt all wet trying to wash the roof. And yes, she had shorts on. Fricken hell, I was installing the BlackVue at the time and didn't have my glasses on. I can see up close with no problem, but can't see far worth a shit.

:okay:

[Spectre_Cdn]

Not really, but today, the neighbour's hot 26 year old daughter was out washing the family SUV. She was up on a stool and she was getting the front of her T-shirt all wet trying to wash the roof. And yes, she had shorts on. Fricken hell, I was installing the BlackVue at the time and didn't have my glasses on. I can see up close with no problem, but can't see far worth a shit.

:okay:
:yuno:
U HAVE BLACKVUE. Y U NO RECORD IN 1080P?
:rukidding:

[MG1]

:yuno:
U HAVE BLACKVUE. Y U NO RECORD IN 1080P?
:rukidding:

BECAUSE IT WAS FACING THE OTHER WAY!!!!!!

I wanna cry now........... I have failed all you RS Horndogs. I will make it up to you guys. I know when she leaves for work............ gawd, that sounds so bad.

I am not that bad........... honestly, ask anyone who has met me. I am a very decent guy.

[kakucaekz]

Cleaned off intercooler pipes and a heat shield, just a little wet sand and aluminium polish. Did the strut bar too, looks aight.

[AW607]

took it to river road with girlfrand, managed to catch the last bit of a sunset last night

http://i48.tinypic.com/ta6iq9.jpg

http://i45.tinypic.com/29w2ww4.jpg

[GE]

Installed this.
http://i60.photobucket.com/albums/h7/vwdean/4a717ed2.jpg

Also modified coilovers on Volvo and lowered GTI back down.

[originalhypa]

http://img.photobucket.com/albums/v253/hypasteve/ade7db51.jpg

I picked the shiny wheels to run.
For now.

:fullofwin:

[Greenstoner]

Fill 30 dollars of gas

[CP.AR]

washed it!

[belaud]

waxed it....again :okay:

[dvst8]

removed tint

[tofu1413]

washed, and tire shined!

[satek]

Went from this

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/295085_10150797341647606_267399724_n.jpg

bondo
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-prn1/s720x720/554004_10151043422750210_1987554706_n.jpg

sanding
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/287812_10151045871405210_133108926_o.jpg

paint...need more clearcoat
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-prn1/561222_10151047841630210_1118389877_n.jpg

[bottle]

Washed and waxed... simply great weather we've been having lately!

[busdriverman]

changed the oil

300V...cuz racebike

[88SupraT]

finally installed my front bbk on my supra this past Saturday, I'm about 95% complete just need to plumb the lines(didn't have a pan to catch the brake fluid)

Before
http://i56.photobucket.com/albums/g180/turbo_1234/IMG_0942.jpg

After
http://i56.photobucket.com/albums/g180/turbo_1234/IMG_0941.jpg

Then after will be my rear bbk within the week.

[- kT]

new ecu installed and reflashed!

[bloodmack]

Went from this

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/295085_10150797341647606_267399724_n.jpg

bondo
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-prn1/s720x720/554004_10151043422750210_1987554706_n.jpg

sanding
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/287812_10151045871405210_133108926_o.jpg

paint...need more clearcoat
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-prn1/561222_10151047841630210_1118389877_n.jpg

Did you use spray paint? I was thinking about roller painting my whole car.

[AVS_Racing]

get new tires mounted :awwyeah: hope they wont rub :pokerface:

[JSALES]

changed the spark plugs

[spoon.ek9]

drove her home!! the 2.0L is done! :D

[satek]

Did you use spray paint? I was thinking about roller painting my whole car.

I used plastikote from lordco..unless you really don't care about the car, I wouldn't use a roller. bits of fiber from the roller gets stuck in the paint.

[asr]

Installed Carbon Fiber front bumper lip
http://farm8.staticflickr.com/7128/7551445140_e3c1153d8f_z.jpg

[bloodmack]

I used plastikote from lordco..unless you really don't care about the car, I wouldn't use a roller. bits of fiber from the roller gets stuck in the paint.

really? Some of those guys who used the rustoleom with rollers turned out pretty amazing.

[MindBomber]

really? Some of those guys who used the rustoleom with rollers turned out pretty amazing.

Rollers are fine, you'll only get bits stuck in the paint if you use the wrong type.

[snails]

nothing yet today, but yesterday, washed her, cleaned up the bay after my engine swap :) put new short shifter in "ebay garbage bent haha" might put the new lip on the new bumper today, and get my front spacers on after a fender roll :D

[Energy]

Washed and waxed. A lot of work but worth it on a black car.

[AW607]

gave it a well deserved wash, shined the tires, cleaned the dash, and changed the oil. Today was a good day :fullofwin:

[jasonturbo]

This all took place over the last couple weeks actually...

CSL Trunk, CSL Diffuser, OEM BBS Zcp Rims + Conti DW, MS Spacers, OEM tail lights, Tint removal.

Before:
http://i32.photobucket.com/albums/d16/jasonturbo/photo2-1.jpg

After:
http://i32.photobucket.com/albums/d16/jasonturbo/photo-2.jpg

And for what's to come soon...
http://i32.photobucket.com/albums/d16/jasonturbo/photo1-2.jpg
http://i32.photobucket.com/albums/d16/jasonturbo/photo2-2.jpg
19x11 and 19x9.5 SSR SP3 in SBC/Polished

KW V2's and Vorschlag plates also going in soon..

[daval]

installed new seat. My Sparco fighter is for sale.

[mb_]

Changed oil. Thanks to Paradise240 for lending me his jack stands :)

[Oshiguru]

Did my first mod under the hood by myself. It felt really rewarding taking the car for a drive after installing the intake! :woot2:
http://img513.imageshack.us/img513/2959/img20120713200649.jpg

[belaud]

Struggled with some wheels today.

Gorgeous

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/339411_10151106816610449_1939657754_o.jpg

[jasonturbo]

Test fit the stance pants... the fronts were not getting along with the brembo's so these wont be on until I find another braking solution.

http://i32.photobucket.com/albums/d16/jasonturbo/photo32.jpg
http://i32.photobucket.com/albums/d16/jasonturbo/photo53.jpg
http://i32.photobucket.com/albums/d16/jasonturbo/photo-3.jpg
http://i32.photobucket.com/albums/d16/jasonturbo/photo46.jpg

[k3lv]

^ spacers? Looks like sex though!

[Yodamaster]

Marked up one of the hatches, going to be the test mule for something special.


http://img163.imageshack.us/img163/6129/p1011174.jpg (http://imageshack.us/photo/my-images/163/p1011174.jpg/)

http://img43.imageshack.us/img43/535/p1011177b.jpg (http://imageshack.us/photo/my-images/43/p1011177b.jpg/)

http://img839.imageshack.us/img839/1144/p1011175.jpg (http://imageshack.us/photo/my-images/839/p1011175.jpg/)

http://img577.imageshack.us/img577/7672/p1011173.jpg (http://imageshack.us/photo/my-images/577/p1011173.jpg/)

http://img59.imageshack.us/img59/9527/p1011176.jpg (http://imageshack.us/photo/my-images/59/p1011176.jpg/)

[88SupraT]

Finished my rear bbk on Sunday, and dropped my wheels off for powder coating.

[jasonturbo]

^ spacers? Looks like sex though!

Nope, 19x11 +11 offset.

131mm of lip

[fliptuner]

What is that a 260Z, Yoda?

[reza]

found one of my injector orings tore and spewed fuel everywhere. luckely i caught it on car start up. replaced it with a spare one.
later swapped gm maf+maft back for oem mas and retuned start up, idle and cruise. wot will have to wait for another day.

[Yodamaster]

What is that a 260Z, Yoda?

1972 240z.

[westopher]

I think he is saying spacers for the fronts to clear the brakes? How much more room do you think you'd need?

[nabs]

Filled it with Premium fuel..

the car has been abused unfortunately =( never been filled with premium fuel even though it needs it. Very long time between oil changes. made me =(

Tomorrow, OIL CHANGE


PS. Just bought the car yesterday.

[AVS_Racing]

Filled it with Premium fuel..

the car has been abused unfortunately =( never been filled with premium fuel even though it needs it. Very long time between oil changes. made me =(

Tomorrow, OIL CHANGE


PS. Just bought the car yesterday.

did you take any mechanic to check out the car before you bought it just to make sure you didn't get a lemon :suspicious:

[nabs]

yeah that's what the delay was in me getting it, it was subject to an inspection.

[AVS_Racing]

..... wouldn't that lead to future engine problems....... I would stay away if I found out BEFORE buying a car requiring premium that only got regular + not really properly maintained. :pokerface:

[jasonturbo]

I think he is saying spacers for the fronts to clear the brakes? How much more room do you think you'd need?

Even with a 12mm spacer they didnt clear, the brakes are hitting where the wheel disk bolts up to the barrel.. damn you beautiful stepped lips!!!! And with that 12mm spacer, there is an insane amount of poke, way more than the rear.

[SumAznGuy]

..... wouldn't that lead to future engine problems....... I would stay away if I found out BEFORE buying a car requiring premium that only got regular + not really properly maintained. :pokerface:

It's a shame. With the current high fuel prices, some people are cheaping out on gas thinking the knock sensor will retard the timing enough to run the car safely on 87 octane.

[koukimonst3r]

Even with a 12mm spacer they didnt clear, the brakes are hitting where the wheel disk bolts up to the barrel.. damn you beautiful stepped lips!!!! And with that 12mm spacer, there is an insane amount of poke, way more than the rear.

I've got 17mm spacer up front on an 18x10 + 25 wheel just to clear my BBK ):

[nabs]

..... wouldn't that lead to future engine problems....... I would stay away if I found out BEFORE buying a car requiring premium that only got regular + not really properly maintained. :pokerface:

What sort of engine problems would I be looking for that could be caused by this?

[Akinari]

Did my first mod under the hood by myself. It felt really rewarding taking the car for a drive after installing the intake! :woot2:
http://img513.imageshack.us/img513/2959/img20120713200649.jpg
Is that the Corksport intake for the CX-5? How is the car? I'm planning on going for a test drive soon after reading about all the positive reviews and riding along in my friend's CX-5.

[SumAznGuy]

What sort of engine problems would I be looking for that could be caused by this?

If they are running to low of octane, there could be some detonation damage on the piston top and combustion chamber. Pull out the plugs and take a look at them.

I've also heard that detonation causes unnecessary stress/wear on crank shaft bearings too.

[sonick]

If they are running to low of octane, there could be some detonation damage on the piston top and combustion chamber. Pull out the plugs and take a look at them.

I've also heard that detonation causes unnecessary stress/wear on crank shaft bearings too.

Depends on the car, if it's newer it should have knock sensors and the technology to retard timing to prevent pre-detonation from occurring.

[Matsuda]

Is that the Corksport intake for the CX-5? How is the car? I'm planning on going for a test drive soon after reading about all the positive reviews and riding along in my friend's CX-5.

he has a Mazda 3

[Akinari]

The setup is nearly identical :derp: I guess since both pretty much use the same engine

http://www.corksport.com/blogs/219-CX5/Cx55.jpg

[snails]

ek side skirts!, a little heat gun and it will be perfect! :concentrate:

http://i1154.photobucket.com/albums/p531/langleychrysler/67ab2312.jpg

[fliptuner]

looks pretty clean^^^

[snails]

looks pretty clean^^^


thanks, looks better in person, no one ever made anything for these EF's that wernt masssive body kits, so im left fitting other car parts! ie. the vw fron lip! haha:fullofwin:

[fliptuner]

I think I still have a VR lip if it'll fit.

[Phil@rise]

Put the R/T back on the road. Fitted up some new rubbers on the front yesterday and replaced a leaking power steering line and burned gas lots of gas. A fair bit of rubber too lol just tryin my best to fit into surrey.

[snails]

yeah, mk3 vr lips fit, a little trimming and encouraging with a heat gun and its one of the better fits you can get!

[SumAznGuy]

Depends on the car, if it's newer it should have knock sensors and the technology to retard timing to prevent pre-detonation from occurring.

It's a shame. With the current high fuel prices, some people are cheaping out on gas thinking the knock sensor will retard the timing enough to run the car safely on 87 octane.

That's the problem. Depending on how far back the car is programmed to retard the timing, it may not be enough to prevent detonation.
Especially if the car is designed to run on 91 octane and the owner uses 87 for an extended period of time.

[satek]

Did some flaring/pulling
http://i71.photobucket.com/albums/i124/neties/S13/SNC00199.jpg

[Paradise240]

ek side skirts!, a little heat gun and it will be perfect! :concentrate:


I always see your car parked on a street, which won't be named and I always take a look at it. It's very eye catching and clean :)

[ApePee2]

Did some flaring/pulling

nice work! I've contemplated doing the samething, but I'm a little hesitant knowing that my quarters will most likely buckle before I get a pull like that.
What type of tools did you use? Just a roller?

[nabs]

My car has a knock sensor, so i'm sure it will be fine. [reply to sumazndude]

I got the Oil Change done Full Synthetic oil - previous owner let it go 20k+ km's without a change =(

Radiator Flush

New Air Filter and Cabin Air Filter...

and gave it a nice long bath =)

[satek]

nice work! I've contemplated doing the samething, but I'm a little hesitant knowing that my quarters will most likely buckle before I get a pull like that.
What type of tools did you use? Just a roller?

I used a roller and heatgun....always keep the metal warm and the panel won't buckle.

[Glove]

painted my interior last night

[originalhypa]

I had Jason at Dale's do my bi-yearly alignment. This time with less emphasis on performance, and more emphasis on style. Fuck these new laws, the gov't isn't going to get my car.

Anyway... the end result.

http://img.photobucket.com/albums/v253/hypasteve/fc0bf76e.jpg

[westopher]

Fuck these new laws, the gov't isn't going to get my car.

Curious as to what this means?

[nabs]

got the rear windows tinted!

[k3lv]

I had Jason at Dale's do my bi-yearly alignment. This time with less emphasis on performance, and more emphasis on style. Fuck these new laws, the gov't isn't going to get my car.

Anyway... the end result.


Love the SBC rpf1's. Truck looks gangster too

[suprat88h]

I test fitted my 325 et streets, Can anyone say spacers and more roll.pulling :)


http://i545.photobucket.com/albums/hh382/renabasile/a2fcbdb4.jpg

http://i545.photobucket.com/albums/hh382/renabasile/ea83c8b2.jpg

http://i545.photobucket.com/albums/hh382/renabasile/9b439a04.jpg

http://i545.photobucket.com/albums/hh382/renabasile/780ead3b.jpg

http://i545.photobucket.com/albums/hh382/renabasile/7f990a69.jpg

http://i545.photobucket.com/albums/hh382/renabasile/a2fcbdb4.jpg

[fliptuner]

Your driveway's on an incline and your wheel chocks are in front of the tires?

[suprat88h]

Your driveway's on an incline and your wheel chocks are in front of the tires?

driveway is flat pics deceiveing!

[fliptuner]

I don't know, man, this tells me otherwise:

http://i545.photobucket.com/albums/hh382/renabasile/780ead3b.jpg

[T4RAWR]

I don't know, man, this tells me otherwise:

http://i545.photobucket.com/albums/hh382/renabasile/780ead3b.jpg

the incline is being caused by a shadow.

its actually a flat driveway

[fliptuner]

the incline is being caused by a shadow.

its actually a flat driveway

That's not a shadow, that's the edge of the driveway.

Meh, whatever. I still love that car. I don't think you need a roll, unless you space it out more. I think it looks fine the way it is.

[C-unit]

finally assembly.


http://i214.photobucket.com/albums/cc239/GenerisLabo/1993%20G-Lab%20R32/IMG_1763.jpg
http://i214.photobucket.com/albums/cc239/GenerisLabo/1993%20G-Lab%20R32/IMG_1767.jpg

[toyota86]

I passed aircare.
Didn't think I was going to make it but I did.
Going to throw my regular exhaust back on tomorrow.

[ilvtofu]

That's not a shadow, that's the edge of the driveway.

Meh, whatever. I still love that car. I don't think you need a roll, unless you space it out more. I think it looks fine the way it is.

wheel chocks in the front because jacking up the rear? I onno

[originalhypa]

Curious as to what this means?

It means that even though we beat the Nazis in 1945, some of them survived to join BC politics.

Sports car seizures 'a deep reversal of important rights' | British Columbia (http://bc.ctvnews.ca/sports-car-seizures-a-deep-reversal-of-important-rights-1.694558)

got the rear windows tinted!

haha, they are tinted at 50%, but it sure doesn't look like it in the pics.
:D

Love the SBC rpf1's. Truck looks gangster too

Thanks man!
:fullofwin:

[radioman]

Have yet to do anything major on the car but this is the first thing I've done;

http://i.imgur.com/rODg0l.jpg

Tint to follow.

[european]

I replaced a bunch of rear suspension parts a few days ago. I forgot to put mention in this thread :p

BB6 Honda Prelude Rear Koni Suspension - YouTube

Later on that week I washed the car and drove around town :p

97 BB6 Honda Prelude - YouTube

[ApePee2]

^Awesome job. Makes me miss my lude.....:okay:


Changed the transmission and differential oil... Grrrrrrrr honda made the diff fill nut almost impossible to get to without either a short socket or open ended wrench ..sigh* took a full 2 hours.

http://www.freewebs.com/li3nn/2012-07-21.JPG

[C-unit]

engine in, most of the lines are hooked up..almost there!

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-prn1/552573_10151946038505591_1518700111_n.jpg
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/422204_10151946039715591_131274309_n.jpg

[ApePee2]

Whoa! Nice work, what type of numbers are you pushing?

[C-unit]

I am aiming 400whp @ 7-10psi.

[!e.lo_]

took the blue tape off. no more spoon racecar look =[
aznboi128 came by and helped me take out some interior panels.

http://img11.imageshack.us/img11/7294/img2012072300996.jpg
http://img822.imageshack.us/img822/8701/img2012072300997.jpg

[ilvtofu]

Bled clutch and changed oil, while the car was up on jackstands I went to diagnose my front end clunk after the track day last week

Didn't take long...
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash3/527156_10150986569077912_594260271_n.jpg

[Project_240]

Got my self a couple of things this month! Can't wait to see how everything looks after it's put together!

:)


http://img155.imageshack.us/img155/9538/wpidimg20120627wa0001.jpg

http://img401.imageshack.us/img401/4373/20120628142440.jpg

http://img6.imageshack.us/img6/1473/20120628142527.jpg

http://img191.imageshack.us/img191/6220/20120628142539.jpg (http://imageshack.us/photo/my-images/191/20120628142539.jpg/)

[westopher]

OH GOD LOVE MEISTERS:eek5r:

[Limitless]

Got my self a couple of things this month! Can't wait to see how everything looks after it's put together!

:)


http://img155.imageshack.us/img155/9538/wpidimg20120627wa0001.jpg

http://img401.imageshack.us/img401/4373/20120628142440.jpg

http://img6.imageshack.us/img6/1473/20120628142527.jpg

http://img191.imageshack.us/img191/6220/20120628142539.jpg (http://imageshack.us/photo/my-images/191/20120628142539.jpg/)
Those wheels :drool

Spent 20 minutes today doing a cheap little DIY on the interior of my car. The fake switches kind of bugged me and I needed a place to put my cell phone if I had a drink in the car, so I made this :)

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/524315_10151948190320582_1149011408_n.jpg

Cut out and made a little cardboard box and covered it with an old black shirt I didn't need anymore so it would be a bit more gentle on my phone. Didn't want to use any kind of adhesive to bond the cloth onto the cardboard in case it'll fall out later, sharpied the staples black so it blends in with the shirt. Not too happy that it's cardboard, but I guess you can't really tell. Much more useful than the fake switches lol

[Klutch]

spacers

http://i48.photobucket.com/albums/f247/dohcvtec25/07252012366.jpg

[belaud]

Your shift boot looks like its about to fall off :pokerface:

[Limitless]

If you're talking about mine, that's the little wrist band thing I have hanging on it lol
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/473747_10151935328890582_1777859166_o.jpg

[!e.lo_]

I think the other pic makes the shift boot look like a stretched piece of rubber.
Get some black fabric and make a nicer pouch. It's a good idea for a useless stack of non-buttons.

[Energy]

^^You get an A for creativity.

[Harvey Specter]

My friend waxed my car using dodo juice products, amazing stuff;

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/292344_10151968838870175_437349091_n.jpg

[BillyBishop]

As she sits.
Dropping the engine out tomorrow

12570

[jing]

Got my self a couple of things this month! Can't wait to see how everything looks after it's put together!

:)


http://img155.imageshack.us/img155/9538/wpidimg20120627wa0001.jpg

http://img401.imageshack.us/img401/4373/20120628142440.jpg

http://img6.imageshack.us/img6/1473/20120628142527.jpg

http://img191.imageshack.us/img191/6220/20120628142539.jpg (http://imageshack.us/photo/my-images/191/20120628142539.jpg/)

Are you the guy I sold the Magnaflow cat to? Think you said you had cams on your KA or something like that

[AVS_Racing]

hit a man hole cover on 41st that was sticking up and fucked up my header flange and now exhaust is leaking :fuuuuu: city workers :yuno: learn to pave roads

[Project_240]

Are you the guy I sold the Magnaflow cat to? Think you said you had cams on your KA or something like that

No it's not me. Haven't touched the engine "yet"! :)

[asr]

Changed differential gear fluid today.

http://farm9.staticflickr.com/8281/7658376670_ca7fc09418.jpg

[harrison716]

Vacuumed the entire engine bay because the previous owner liked to collect all kinds of leafs in there, but I don't.

:fuckthatshit:

[nabs]

Ordered Eibach Pro-Kit springs, got an appointment to get the front bumper repainted (too many rock chips).

[keifun]

put my WRX back on to stage 2 again. Economy mode is lame.

[Volvo-brickster]

yesterday, did plugs, wires, cap and rotor

if anyone has ever worked a V6 pathfinder ....#6 owned my ass...took me almost an hour for that 1 plug