[SSM_DC5]

This question probably belongs to the auto chat group but don't want to start a new thread in case of being flamed. All I wanted to know is if a Honda dealership can transfer inventory from another dealer. I know some of the other manufacturers can do that, but wondering if honda can say like from Destination Honda to Richmond Honda. Thanks!

Yes cars can. However, I believe it's a deal made between the dealerships and nothing with Honda Canada. You might even have less buying power if you get a dealership to bring the car in from another dealership.

[bomberR17]

Yes cars can. However, I believe it's a deal made between the dealerships and nothing with Honda Canada. You might even have less buying power if you get a dealership to bring the car in from another dealership.

Okay thanks. Reason why I ask is because I ordered a car at a dealer but they aren't willing to budge on pricing and I just recently found out my friend knows someone that works at another dealer and might be able to get me a deal. Problem is I don't want to reorder again as it's gonna take 2-3 months.

[SSM_DC5]

Okay thanks. Reason why I ask is because I ordered a car at a dealer but they aren't willing to budge on pricing and I just recently found out my friend knows someone that works at another dealer and might be able to get me a deal. Problem is I don't want to reorder again as it's gonna take 2-3 months.

wait.....2-3 months wait sounds more like a dealership is ordering in from the production line and yes in that case, the dealer may not budge on pricing. If the car is coming from dealership to dealership within metro vancouver, you should have your car in a couple days not months.

If you've already put in your order, you probably also gave a non-refundable deposit. Depending on the deal that you might get from the other dealer, it may not be worth the trouble.

[bomberR17]

wait.....2-3 months wait sounds more like a dealership is ordering in from the production line and yes in that case, the dealer may not budge on pricing. If the car is coming from dealership to dealership within metro vancouver, you should have your car in a couple days not months.

If you've already put in your order, you probably also gave a non-refundable deposit. Depending on the deal that you might get from the other dealer, it may not be worth the trouble.

Yeah, it was ordered from production line. It's currently on its way from factory to the dealership. My deposit is refundable so that's not a worry, I can always walk away from it. I'm gonna see if the dealer would give me accessories instead. I might just stay as is. If the dealer is able to transfer this car, I was gonna use it as a bargaining chip. But from what I'm assuming now, the dealer probably can't transfer it then. Oh wells, learned something for the future.

[underscore]

Anyone ever ship a TV before?

I'm moving back to Vancouver and haven't been able to sell my 40" TV that isn't a significant loss. I checked Canadapost and it seems like it's only about $50-60 to ship it.. I know it might end up breaking but I have all the original packaging and what not.

Can't really decide if $50-60 is worth the gamble of losing the entire TV or just sell it for cheap and "lose" the $300.

It should be fine being shipped in the original packaging, I mean that's how it got to the store in the first place. Just make sure you get insurance on it.

[underscore]

After over 13 years of faithful service to my family and me, Cherry-okee is off to explore the world with someone else. Happy trails old friend.

https://scontent-sea1-1.xx.fbcdn.net/v/t31.0-8/15385414_10157988996175193_6317776964096735642_o.j pg?oh=f6914b6eadb97f6ece4e6fa8ed97883c&oe=58ED3BB0

[Manic!]

https://www.youtube.com/watch?v=sCEzEVJkO1U

[Presto]

In regards to Cineplex D-Box, does it allow for adjustment of the intensity of the movement? Can it be turned off at the seat?

[godwin]

I dont' think so, it is also only the back few rows too. In regards to Cineplex D-Box, does it allow for adjustment of the intensity of the movement? Can it be turned off at the seat?

[TOS'd]

In regards to Cineplex D-Box, does it allow for adjustment of the intensity of the movement? Can it be turned off at the seat?

I dont' think so, it is also only the box few rows too.
To add to this, can't really comment on specifics, but when there is a D-Box seat that is not reserved, it will not move or anything. It will just be a normal seat. So if you happen to have booked D-Box, I'm sure you can ask them to "disable/turn off" the seat, while still having a valid ticket for that seat.

[Presto]

Thanks for the info.

My wife's sister told her that she had a bad time with dbox, so my wife was worried that she wouldn't like it. My friend bought tickets a while ago for Rogue One, so she was stuck. Fortunately, the intensity can be adjusted on the seat. She had it cranked 20 min into the movie, and loved it. I thought it was awesome, as well.

[6o4__boi]

Just noticed that Lee's Chicken in PoCo is no longer called Lee's...it's called John's Chicken now

same owners...apparently they just wanted out of the franchise. Chicken is still just as good.

damn, i want some fried chicken now.

[fliptuner]

Noticed that a few weeks ago. Haven't been in yet but was hoping it was a case of them not wanting to pay for the name.

There's also a new H-Mart opening up by the HD, behind Costco.

[6o4__boi]

yeeeeee....i'm looking forward to that H-Mart opening up
can hit it up for my asian groceries after my Costco runs...no need to drive all the way to CC T&T for instant ramen :awwyeah:

[murd0c]

its the same recipe and chicken as Lee's just different owns. Hmarts grand opening is tomorrow and they have tons of deals as well

[SumAznGuy]

NFL security guard masturbates in front of horrified fans | New York Post (http://nypost.com/2016/12/20/this-creepy-security-guard-cant-keep-his-hands-out-of-his-pants/)

:jizz:

[MG1]

I have new respect for Canada Post.............

This is United States Postal Service tracking info. Can someone explain to me how the package left Irvine, CA to make it to Los Angeles, only to be shipped back to Irvine and then go out to LA again?

[fliptuner]

LET THE LONGER DAYS BEGIN!!!!!

[MG1]

:jizz:

More pics of Charger Girls, please......... 'cause as far as I can tell, they don't even look fap worthy. Gulolol

[underscore]

I have new respect for Canada Post.............

This is United States Postal Service tracking info. Can someone explain to me how the package left Irvine, CA to make it to Los Angeles, only to be shipped back to Irvine and then go out to LA again?

I find the initial bit of tracking is always a bit funky, as I'm pretty sure paperwork being done sometimes shows up as your package being scanned.

[MG1]

Irvine, CA to LA in 4, almost 5, days. Horse and carriage? lol. Good thing this is a present to myself.

[SumAznGuy]

More pics of Charger Girls, please......... 'cause as far as I can tell, they don't even look fap worthy. Gulolol

Charger Girls Squad | San Diego Chargers (http://www.chargers.com/charger-girls/squad)

[MG1]

thanks, but no thanks.................

[murd0c]

yeeeeee....i'm looking forward to that H-Mart opening up
can hit it up for my asian groceries after my Costco runs...no need to drive all the way to CC T&T for instant ramen :awwyeah:

went today for the 10am opening and holy fuck what a shit show, ended up getting 2 lobsters for $8.88 each which was nice and I swear I was the only white person lol

[fliptuner]

Went in to check it out. Line went all the way to the back and around the sides.

:fuckthatshit:

[murd0c]

how long ago did you stop by? I was thinking about swinging by after work to get 2 more lobster.

[fliptuner]

Sorry for the late reply. I went at 3:30 but I suspect it will only get busier as people get off work.

[murd0c]

I said screw it, doesn't want to risk being in line again lol

[fliptuner]

Even when I was there, the line was at least 40 minutes.

Btw, I noticed a new A&W being built on the Maryhill, any other stores going up?

[murd0c]

yup... subway, of course Starbucks is already opened and I heard there could be a sushi joint as well. Walking distance from my work and I can't wait

[fliptuner]

Thought you'd be excited lol

[murd0c]

I bring my lunch most days and only go out for grocery shopping so it doesn't matter much to me lol

[underscore]

Some crazy Aussie put a Lexus 1UZ into an TA22 Celica, added boost, and then mated everything to a Skyline GTR AWD system with a sequential gearbox. It seems my dreams to put a mostly stock 1UZ into an early Celica are a bit tame now :lol

https://www.youtube.com/watch?v=pJbA-wjkS5o

[racerman88]

Has anyone been to Enchanted? Some Christmas thing in Vancouver. Want to get some personal opinions on this. I've read some disappointing reviews. Don't want to make the trip and spend the money if it isn't worth it.


Sent from my iPhone using Tapatalk

[murd0c]

don't drive since parking is $20

[Liquid_o2]

I've heard mixed reviews. Some said it is a complete rip off, others said they really liked it, but still felt it was a bit overpriced.

[lilaznviper]

wasn't really worth the price at $20 unless you really want to see lights and take hipstergram pictures at the tunnel of lights. better off going to the lights in coquitlam

You Can Stroll Through A 1.2km Trail Of Enchanting Christmas Lights At Lafarge Lake | Narcity Vancouver (http://www.narcity.com/vancouver/you-can-stroll-through-a-1-2km-trail-of-enchanting-christmas-lights-at-lafarge-lake/#)

[ForbiddenX]

It should be fine being shipped in the original packaging, I mean that's how it got to the store in the first place. Just make sure you get insurance on it.

TV just arrived via Greyhound and it wasn't broken! Was kind of iffy but our first shipment arrived without any damages so decided to just go for it. Used the original packaging and added some more stuff around it to prevent it from moving even more.

[StylinRed]

Went to that HMart today, parking is crazy around the store lazy assess keep circling the front of the store for a close spot, but right by urban barn the parking is empty

Some sweet deals, and yummy products!

[MG1]

Probably been posted already, but whatever............

Engine Quiz | HowStuffWorks (http://auto.howstuffworks.com/engine-quiz.htm?mkcpgn=i600001551&utm_source=outbrain&utm_medium=paid&utm_campaign=CACarSmarts:Engines(desktop)&utm_term=575984&utm_content=Good+With+Cars%3F+Take+Our+Car+Engine+ Quiz)

There are other ones in the links.


There's even one for Inaii.............. rotary engine quiz.

[Inaii]

I'm going to laugh if I get that one wrong :lol

I got 50%.... most of the questions were related to the first rotary engines and stuff out of WWI... Apparently I need to learn some history lol

[stewie]

Question:

Enhanced drivers license - when using it to cross the border can you use any lane aside from the nexus lane?

[murd0c]

you can use just the regular border lanes like when you go across with your passport

[Hondaracer]

Where's the best place to buy cheap xmas lights now that it's past? I need a lot of the same white lights

[Inaii]

Walmart or Superstore would be my best guess

[Fcukedd]

Can anyone give me a general idea of what parts you're allowed to take off when a car is written off?

Friend totalled his car, but wants to keep his grill. He already received his cheque. Would there be any consequences in taking it off during the time he cleans out his interior?

[murd0c]

Where's the best place to buy cheap xmas lights now that it's past? I need a lot of the same white lights

Lowes has some really good deals right now

[Dragon-88]

Anyone know what the difference is between Marine battery terminals and regular battery terminals? Are Marine terminals just heavy duty?

The Gf's jeep has some cheap terminals like these below. Super cheap. When I tried to unbolt the rusted nut, the whole thing just snapped.

MotoMaster Top Post Battery Terminal, OE Crim | Canadian Tire (http://www.canadiantire.ca/en/pdp/motomaster-top-post-battery-terminal-oe-crimp-style-0113500p.html#srp)

I saw these nicely coated terminals,but they say Marine. Is there a difference?

MotoMaster Marine Battery Terminals, Epoxy Co | Canadian Tire (http://www.canadiantire.ca/en/pdp/motomaster-marine-battery-terminals-epoxy-coated-0113554p.html#srp)

OR should I just get these brass ones?
MotoMaster Marine Battery Terminals, Brass | Canadian Tire (http://www.canadiantire.ca/en/pdp/motomaster-marine-battery-terminals-brass-0113505p.html#srp)

[godwin]

Marine batteries are more shock proof.. think about being on BC ferry.. those things shake like crazy.. so Marine type accessories are usually design for that account.

The crim on one looks really weak sauce! I hope you have the right crimper!!

Anyone know what the difference is between Marine battery terminals and regular battery terminals? Are Marine terminals just heavy duty?

The Gf's jeep has some cheap terminals like these below. Super cheap. When I tried to unbolt the rusted nut, the whole thing just snapped.

MotoMaster Top Post Battery Terminal, OE Crim | Canadian Tire (http://www.canadiantire.ca/en/pdp/motomaster-top-post-battery-terminal-oe-crimp-style-0113500p.html#srp)

I saw these nicely coated terminals,but they say Marine. Is there a difference?

MotoMaster Marine Battery Terminals, Epoxy Co | Canadian Tire (http://www.canadiantire.ca/en/pdp/motomaster-marine-battery-terminals-epoxy-coated-0113554p.html#srp)

OR should I just get these brass ones?
MotoMaster Marine Battery Terminals, Brass | Canadian Tire (http://www.canadiantire.ca/en/pdp/motomaster-marine-battery-terminals-brass-0113505p.html#srp)

[Dragon-88]

The crim ones are whats currently installed. I want to upgrade them as they are super weaksauce..

[fliptuner]

They're just more heavy duty and resistant to corrosion.

[coneZONE]

Anyone know what the difference is between Marine battery terminals and regular battery terminals? Are Marine terminals just heavy duty?

The Gf's jeep has some cheap terminals like these below. Super cheap. When I tried to unbolt the rusted nut, the whole thing just snapped.

MotoMaster Top Post Battery Terminal, OE Crim | Canadian Tire (http://www.canadiantire.ca/en/pdp/motomaster-top-post-battery-terminal-oe-crimp-style-0113500p.html#srp)

I saw these nicely coated terminals,but they say Marine. Is there a difference?

MotoMaster Marine Battery Terminals, Epoxy Co | Canadian Tire (http://www.canadiantire.ca/en/pdp/motomaster-marine-battery-terminals-epoxy-coated-0113554p.html#srp)

OR should I just get these brass ones?
MotoMaster Marine Battery Terminals, Brass | Canadian Tire (http://www.canadiantire.ca/en/pdp/motomaster-marine-battery-terminals-brass-0113505p.html#srp)

The metal crimp-on one is the worst, it's probably the most susceptible to oxidation and corrosion, like rust on top of the regular powdery acid corrosion stuff.

If your battery cables have already been previously chopped off and don't have an eyelet-style terminal to bolt onto the marine terminals, this one is probably better:
https://m.canadiantire.ca/#/products/productDetail/0113510P?storeClearance=false&selectedSku=0113510&isNonOnline=false&isAutomotive=false&isBarcodeValue=false&serverName=ATLAS&productCode=0113510P&selectedProductCode=0113510P&quantity=1

the brass version is $6.99 each, vs $3.99 of the lead style.

Both lead and brass are up there in the top in terms of conductivity, depending on your sources they will say one is better than the other, but there isn't much difference. I like using the brass ones because it's more solid in construction, and all late model cars use plated brass terminals from the factory anyway.

Oh yeah, if you get the red and black painted terminals, make sure you check the contact surfaces aren't painted over, because sometimes you get defective ones like that lol. Just clean it through with a terminal brush.

[Cwift]

Bought something from Best Buy for boxing day and since it wasn't available in any stores they'd have to send it to me from the warehouse using Canada Post. Expected delivery is tomorrow, and I've been tracking the shipment and the last time I saw it, it was "In Transit" (like a few hours ago). Just checked it now and the tracking number doesn't even work. Anyone know why it doesn't work now?

[MG1]

Patience is the key.

It will arrive.

Neither snow nor rain nor heat nor gloom of night stays these couriers from the swift completion of their appointed rounds.

US Mail service, but probably similar to Canada Post's.

[6o4__boi]

Bought something from Best Buy for boxing day

well there's your problem right there
:troll:

Lol usually takes a little while longer cus CP is on the fritz after big retail days. I ordered something from them either last BD or BF and it arrived a few days later than expected.

[GS8]

My Best Buy package was out for delivery at 7:47 and then they needed to 'verify recipient's address. Possible delay.' at 7:51

:derp:

I'll be patient. I didn't order much anyway. Would have really preferred shipping right to a Best Buy store but that option wasn't available.

:yuno:

[Cwift]

Welp, tracking is back up, with expected delivery today but it's still "in transit". Dunno if it's going to be delayed or if they lost my package lol

[k3mps]

For those of you that have gone to the Grouse Mountain lights and Christmas thing, is it worth the money to go up?

[racerman88]

Price of gas is getting ridiculous up here again, I just saw regular at 1.35 litre and premium is 1.53.
It's only 1.03 per litre for premium in Blaine.


Sent from my iPhone using Tapatalk

[fliptuner]

RIP Father Mulcahy

William Christopher died, at age 84

https://images-na.ssl-images-amazon.com/images/M/MV5BMTM5NTgwMTg5MF5BMl5BanBnXkFtZTYwNzM3NzEz._V1_U Y1200_CR85,0,630,1200_AL_.jpg

[StylinRed]

Wow I thought he passed ages ago, like before I was born

[godwin]

Here is the answer What can we expect for 2017 as gas prices continue to rise? - NEWS 1130 (http://www.news1130.com/2016/12/31/can-expect-2017-gas-prices-continue-rise/)

Price of gas is getting ridiculous up here again, I just saw regular at 1.35 litre and premium is 1.53.
It's only 1.03 per litre for premium in Blaine.


Sent from my iPhone using Tapatalk

[stewie]

Anyone know of a decent bar in Langley to watch a Canucks game at?

[Dragon-88]

Anyone ever try these cheap chinese OBDII readers?

https://www.aliexpress.com/item/Free-shipping-Mini-OBDII-Car-Diagnostic-Tool-Bluetooth-Car-ELM327-Car-OBD2-OBD2-II-Car-OBD/32771146549.html?spm=2114.30010308.3.89.4PiEkT&ws_ab_test=searchweb0_0,searchweb201602_2_10065_10 068_10000009_10084_10083_10080_10082_10081_10060_1 0062_10056_10055_10054_10059_10099_10078_10079_426 _10103_10073_10102_10096_10052_10053_10050_10107_1 0051_10106,searchweb201603_4,afswitch_5_afChannel&btsid=fb4fc3ec-73a0-4066-8bcf-d530c55e1796

I need something for diagnostics and just curious if I would run into any problems with these units?

[syee]

Anyone ever try these cheap chinese OBDII readers?

https://www.aliexpress.com/item/Free-shipping-Mini-OBDII-Car-Diagnostic-Tool-Bluetooth-Car-ELM327-Car-OBD2-OBD2-II-Car-OBD/32771146549.html?spm=2114.30010308.3.89.4PiEkT&ws_ab_test=searchweb0_0,searchweb201602_2_10065_10 068_10000009_10084_10083_10080_10082_10081_10060_1 0062_10056_10055_10054_10059_10099_10078_10079_426 _10103_10073_10102_10096_10052_10053_10050_10107_1 0051_10106,searchweb201603_4,afswitch_5_afChannel&btsid=fb4fc3ec-73a0-4066-8bcf-d530c55e1796

I need something for diagnostics and just curious if I would run into any problems with these units?

I've used them before (not that specific one, but they're all the same - based on the ELM327). I have the BT one and also the corded USB one. I only use it to pull CEL codes and not much more than that though. I haven't had any issues with them and there's a ton of apps out there that support the ELM327.

[6o4__boi]

did they stop producing nintendo 3DS's or something?

it's OOS pretty much everywhere and only 3rd party sellers are selling it at retarded prize on Amazon.

was hoping to pick up a new 3ds/3dsxl over the holidays but haven't been able to spot one.

[stewie]

I've finally hit a new low point for myself :(

I parked at an impark garage on Broadway beside Original Joe's and wasn't aware that they closed at 10PM. I found that out at 10:18pm. I'm a dumb ass...

My question is if anyone knows if they just ticket all the cars in there when closing or tow them out all at once? I'm heading there tomorrow at 6am hopefully when they'll be open and am praying that my car will still be there.

Going on a long shot here, but has anyone ever done anything this stupid and able to give me some insight as to what to possibly expect? I know I'll have a ticket for sure which I'm happy to pay, I'd just hopefully like to get there and not find that my cars been towed. :(

[vixroar]

I've finally hit a new low point for myself :(

I parked at an impark garage on Broadway beside Original Joe's and wasn't aware that they closed at 10PM. I found that out at 10:18pm. I'm a dumb ass...

My question is if anyone knows if they just ticket all the cars in there when closing or tow them out all at once? I'm heading there tomorrow at 6am hopefully when they'll be open and am praying that my car will still be there.

Going on a long shot here, but has anyone ever done anything this stupid and able to give me some insight as to what to possibly expect? I know I'll have a ticket for sure which I'm happy to pay, I'd just hopefully like to get there and not find that my cars been towed. :(

I've done this before. Parked in an underground impark lot downtown and when I got back to my car, the gate was closed. Called them and they sent a guy over to open the gate for us. Didn't even get a ticket lol.

[godwin]

The question is what are you trying to use it for? Reset/ Diagnostic/ Reprogramming?

What kind of car are you trying to use it on.

These things are extremely basic, so depending on what you are trying to do you might not be able to get the info you need.


Anyone ever try these cheap chinese OBDII readers?

https://www.aliexpress.com/item/Free-shipping-Mini-OBDII-Car-Diagnostic-Tool-Bluetooth-Car-ELM327-Car-OBD2-OBD2-II-Car-OBD/32771146549.html?spm=2114.30010308.3.89.4PiEkT&ws_ab_test=searchweb0_0,searchweb201602_2_10065_10 068_10000009_10084_10083_10080_10082_10081_10060_1 0062_10056_10055_10054_10059_10099_10078_10079_426 _10103_10073_10102_10096_10052_10053_10050_10107_1 0051_10106,searchweb201603_4,afswitch_5_afChannel&btsid=fb4fc3ec-73a0-4066-8bcf-d530c55e1796

I need something for diagnostics and just curious if I would run into any problems with these units?

[jeedee]

Price of gas is getting ridiculous up here again, I just saw regular at 1.35 litre and premium is 1.53.
It's only 1.03 per litre for premium in Blaine.


Sent from my iPhone using Tapatalk

thank the Lord i only have to fill 87 regular :fuckthatshit:

[Manic!]

Anyone know of a decent bar in Langley to watch a Canucks game at?

MATCH Langley | MATCH Eatery & Public HouseMATCH Eatery & Public House (http://matchpub.com/match-langley/)

Went there once with some buddies seemed pretty nice.

[ImportPsycho]

We cannot flag/report Craigslist ad anymore?
There used be a button to flag, spam, mis categorized etc etc... not there anymore. Just one button to hide it from your search results

[fliptuner]

Click on: prohibited

[ImportPsycho]

Click on: prohibited

I thought that only hides from my view, does that actually report?

[fliptuner]

The trashcan with the X, beside the title, hides it from view. "Prohibited" flags and hides

[6o4__boi]

anyone with an LG G5 here know if it comes with adoptable storage?

[Hondaracer]

Anyone use wayfair.ca before? MG1 thought you might have mentioned them?

Looking for a bed frame for spare bed room, their prices seem good and free shipping?

[sonick]

Used them before. Good service, Bought a desk from them, some wood pieces came cracked and broken, sent us a whole new one free of charge and we kept the old one, gave it to my bro in law.

[MG1]

Anyone use wayfair.ca before? MG1 thought you might have mentioned them?

Looking for a bed frame for spare bed room, their prices seem good and free shipping?

I've used wayfair.com, not .ca

American Maid Tortilla Warmer. Can't buy them up here. Absolutely fantastic as a rice warmer. Anyway, it cost me $8.00 USD and $4.99 shipping to Blaine. You can't get it here, so I didn't care how much they were. Anyway, the thing arrives and the box is pretty big. To my surprise there are two of them in the box, LOL.

https://www.wayfair.com/American-Maid-Plastic-Tortilla-Bread-Warmer-P-00021-ARIL1006.html


Dishwasher safe
Microwaveable
Made in the USA and BPA and Melamine Free, Gulololololololol


All the Costco sampling tables in the US use these, so it was a no brainer. Pretty sturdy and can go into freezer.

[Razor Ramon HG]

anyone with an LG G5 here know if it comes with adoptable storage?

No. You need to root and edit a file.

https://forum.xda-developers.com/lg-g5/how-to/enable-adoptable-storage-t3368207

But I wouldn't advise on using adoptable storage unless you have the world's fastest microSD.

[PiuYi]

Anyone use wayfair.ca before? MG1 thought you might have mentioned them?

Looking for a bed frame for spare bed room, their prices seem good and free shipping?

Bought a dining table set from them. First order "got lost in transit" somehow, so they offered to send another one or give us a refund... we opted for another one that took another month to get here. Turns out quality was absolute shit.... should have gone for the refund :lol

[604STIG]

Anyone use wayfair.ca before? MG1 thought you might have mentioned them?

Looking for a bed frame for spare bed room, their prices seem good and free shipping?

I ordered bar stools from the .com site and had my stuff shipped to Blaine. Pretty hassle free and decent product. I got free shipping at the time so made it worth zipping over to the border.

[sonick]

Bought a dining table set from them. First order "got lost in transit" somehow, so they offered to send another one or give us a refund... we opted for another one that took another month to get here. Turns out quality was absolute shit.... should have gone for the refund :lol

Ya a lot of stuff is dropped-shipped from China so quality is hit or miss.

[Hondaracer]

PIUYi what were the reviews like on the table you bought?

Was it the type of thing where people just thought it was decent but to you it was garbage or were the reviews up and down?

A lot of products have a tonne of reviews but seem to be just the generic BS

[PiuYi]

PIUYi what were the reviews like on the table you bought?

Was it the type of thing where people just thought it was decent but to you it was garbage or were the reviews up and down?

A lot of products have a tonne of reviews but seem to be just the generic BS

https://www.wayfair.com/Latitude-Run-Connor-5-Piece-Dining-Set-LATR2745-LATR2745.html

don't remember the reviews when I got it, but my gripes are similar to what people on there are saying... wobbly chairs, finish on the wood is really poor (bad heat resistance, very easily chipped/scratched), the wood itself is poor quality (you can tell from the underside where there is no finish)

seems like most positive reviews are from people who either aren't using it themselves or haven't used it for long

[bobbinka]

You can vote to replace the Monopoly tokens: New Monopoly Tokens | Vote in All-New Game Tokens (http://www.votemonopoly.com/)

http://geekologie.com/2017/01/11/new-monopoly-tokens-large.jpg

[PiuYi]

anyone else been getting something like this when browsing RS lately?



https://isecguy.files.wordpress.com/2016/10/notsecure.png?w=756&h=165

[6o4__boi]

recommend me an android game good to play in 5-10 mins spurts, preferably free

only game i've been playing consistently is Clash of Clans but that's getting boring

[StylinRed]

Shards of Magic?

It's kinda like world of war craft but for Ur phone, or u can play the Chinese version Age of Magic, or the Japanese version (can't remember the name)

[vitaminG]

I've used wayfair.com, not .ca

American Maid Tortilla Warmer. Can't buy them up here. Absolutely fantastic as a rice warmer. Anyway, it cost me $8.00 USD and $4.99 shipping to Blaine. You can't get it here, so I didn't care how much they were. Anyway, the thing arrives and the box is pretty big. To my surprise there are two of them in the box, LOL.

https://www.wayfair.com/American-Maid-Plastic-Tortilla-Bread-Warmer-P-00021-ARIL1006.html


Dishwasher safe
Microwaveable
Made in the USA and BPA and Melamine Free, Gulololololololol


All the Costco sampling tables in the US use these, so it was a no brainer. Pretty sturdy and can go into freezer.

im pretty sure ive seen those at fruiticana. pretty much every indian household owns one. they can keep rotis warm too!

[MG1]

god damn it................ you mean I could have got them here? LOL. But, 2 for 1 is still pretty sweet.

[Razor Ramon HG]

Gone

[HonestTea]

recommend me an android game good to play in 5-10 mins spurts, preferably free

only game i've been playing consistently is Clash of Clans but that's getting boring

Been playing a game called "Game of Dice", it's pretty much like monopoly lol

[sp00n]

Bros, I'm looking to pamper the car after the winter season. Any recommendations for a reputable and affordable place for a cut and polish package?

[dboy]

Debating if I should wash the salt off the car or let the rain do the work.

[MG1]

Over the years, I've seen more and more asians shopping at Princess Auto. I mean a few years ago, I would have been the only one in the store. Stuck out like a sore thumb amongst a sea of good ol' Canadian rednecks. Yesterday, I would say it was 85% asian. I went into the washroom of the Coquitlam location to see this..........


http://i204.photobucket.com/albums/bb75/89blkcivic/RS%20Bull/IMG_8783.jpg

[fliptuner]

RIP Superfly Snuka

http://www.davidhazy.com/scrapbook/tickets/images/wwf_1982_superfly.jpg

[coneZONE]

Over the years, I've seen more and more asians shopping at Princess Auto. I mean a few years ago, I would have been the only one in the store. Stuck out like a sore thumb amongst a sea of good ol' Canadian rednecks. Yesterday, I would say it was 85% asian. I went into the washroom of the Coquitlam location to see this..........


http://i204.photobucket.com/albums/bb75/89blkcivic/RS%20Bull/IMG_8783.jpg


Same with my dad and I! We used to go to the one on Langley Bypass, until the Coquitlam one was built.
I think I saw that sign last time but I totally forgot about it.
The last couple times I went, I saw a bunch of them hovering around the Surplus section LOL

[MG1]

The Langley location is awesome. Newly renovated. My favourite locations are the main store on Portage in Winnipeg and the one in Langford (Victoria). Princess Auto - so Canadian.

[underscore]

I'm sure there's someone on here that follows these things, I know NSX's aren't terribly common but just out of curiosity what sort of price range do drivers condition (some cosmetic flaws, but mechanically solid) ones tend to land in? Manual trans, JDM or USDM doesn't matter, and I assume early, non-special edition models are the least expensive.

[Dragon-88]

You guys got any tips for racing at TBC?

Going to race tonight and looking for some tips on the track.

TIA

[Armind]

No brakes

[Hondaracer]

I need some custom cushions made for a few bench seats

Basically I'd go to a place like the foam shop etc get my cushions cut then I will need them upholstered, so I need someone to do the upholstery, any recommendations

[punkwax]

You guys got any tips for racing at TBC?

Going to race tonight and looking for some tips on the track.

TIA

Keep foot on gas at all times. Brake when you need to but keep the gas pedal down to maintain revs.

[Dragon-88]

Keep foot on gas at all times. Brake when you need to but keep the gas pedal down to maintain revs.

Doesnt the motor cut out when you apply gas and brake at the same time?

[punkwax]

Don't know. I don't brake. LUL

[604STIG]

You guys got any tips for racing at TBC?

Going to race tonight and looking for some tips on the track.

TIA

Jump out of your cart mid-race and start running & stripping, yelling "I'm on fire" a la Ricky Bobby

[bobbinka]

no brakes

https://www.youtube.com/watch?v=xcyEMBvdyfc

[SSM_DC5]

I need some custom cushions made for a few bench seats

Basically I'd go to a place like the foam shop etc get my cushions cut then I will need them upholstered, so I need someone to do the upholstery, any recommendations

post a pic of what your cushion might look like. I'm trying to picture what kind of sewing you need. I may be able to help.

[Hondaracer]

post a pic of what your cushion might look like. I'm trying to picture what kind of sewing you need. I may be able to help.

its basically going to be like three peices of 4" foam

one approx 5'
one 3'
two 4'

[racerman88]

We used a foam shop on Fraser and 45th I think and they were the best priced for just cushions


Sent from my iPhone using Tapatalk

[Manic!]

https://www.youtube.com/watch?v=sLffhrkNd04

Also if you are wondering WTF floorball is: https://en.wikipedia.org/wiki/Floorball

[unit]

stumbled across these listings on walmart.ca

http://www.walmart.ca/en/ip/my-life-as-18-inch-caucasian-with-brunette-hair-veterinarian-doll/6000196155312

http://www.walmart.ca/en/toys/dolls/baby-dolls/N-1218

[JSALES]

I have a package coming from UPS and I received a call from them saying I need to email them a brokerage number which was given to me over the phone to broker@ups.com because my package needs customs clearance. Can anyone chime in on this? I've never had to deal with this before

[6o4__boi]

how much does Costco charge for balancing tires?

[lilaznviper]

I have a package coming from UPS and I received a call from them saying I need to email them a brokerage number which was given to me over the phone to broker@ups.com because my package needs customs clearance. Can anyone chime in on this? I've never had to deal with this before

I got the same call as well, but i don't have any incoming packages from ups. when i look up the tracking number, nothing comes up

[underscore]

I have a package coming from UPS and I received a call from them saying I need to email them a brokerage number which was given to me over the phone to broker@ups.com because my package needs customs clearance. Can anyone chime in on this? I've never had to deal with this before

Sounds like a potential scam, call UPS back at whatever number is listed on their website and see what they say.

[JSALES]

So I told UPS to email me the documents so I can print it off. I brought it to the CBSA office to get the documents approved then I brought the paperwork to the UPS warehouse so they could release my package.

I saved money because I didn't have to pay for UPS stupid brokerage fees because the CBSA didn't charge me anyways lol

[Gh0stRider]

how much does Costco charge for balancing tires?

$10-15/tire i think

[bcuzracecarz]

Pretty interesting read about what hell week is all about and the process to become a US Navy Seal, lol always curious to see how long I'd last before I'd be ringing the "get me the fuck out of here" bell

US Navy Seals "Hell week" (http://thechive.com/2017/01/12/youre-not-a-navy-seal-until-you-survive-hell-week-52-hq-photos/)

[chouchou]

When's the best time to buy boarding/skiing equipment, and where to shop?

Last set of mountain-outewear I have is about 5-6 years old.. need a bit of an upgrade (also doesn't fit anymore lols). Probably not a good time to buy right now since we're smack-dab in the middle of the season..

How warm / insulated do the things have to be so I can survive a mountain day at Whistler etc? Any recommended brands?

[murd0c]

You guys got any tips for racing at TBC?

Going to race tonight and looking for some tips on the track.

TIA

next time you go have you and your buddies dress the part

https://s29.postimg.org/6p3dd2l93/15966260_1289735887753597_946516417383130670_n.jpg

[k3mps]

When's the best time to buy boarding/skiing equipment, and where to shop?

Last set of mountain-outewear I have is about 5-6 years old.. need a bit of an upgrade (also doesn't fit anymore lols). Probably not a good time to buy right now since we're smack-dab in the middle of the season..

How warm / insulated do the things have to be so I can survive a mountain day at Whistler etc? Any recommended brands?

Re-use-it center on the way to Whistler. Temps and vacationers who purchase equipment sometimes sell them there before leaving.

It's not so much how much you wear but rather what you wear. No point in wearing a 5 layers if it gets wet and frozen.

A nice thick jacket and sweats under a waterproof jacket and pants with boots / toque and mitts is enough.

[6o4__boi]

Recommend me a good vacuum for home (laminate floors and some rugs) use under $100.

I was using a $30 Stanley shop-vac for the last 5 years but the motor finally died on me.

[MG1]

I hope you were using a bag and a HEPA filter, otherwise you're just shooting some of what you sucked up back into the air. Shop vacs are not really designed to be used at home. As for 100 bucks, you're limited to vacs that do very little.

Just my two bits.

[PiuYi]

When's the best time to buy boarding/skiing equipment, and where to shop?

Last set of mountain-outewear I have is about 5-6 years old.. need a bit of an upgrade (also doesn't fit anymore lols). Probably not a good time to buy right now since we're smack-dab in the middle of the season..

How warm / insulated do the things have to be so I can survive a mountain day at Whistler etc? Any recommended brands?

https://www.underarmour.com/en-ca/pid1281080?scid=scplp1281080-001_Large&sc_intid=1281080-001_Large&cid=PLA|CA|B|GGL&gclid=Cj0KEQiAt9vEBRDQmPSow-q5gs8BEiQAaWSEDoMdkVMu58GQVmEFGTL-A71Hd98JiTR2a6O8dotlDbQaAnHm8P8HAQ

i wear one of these and just my ski jacket and that's good enough for up to -15
neck warmers are a must, same with goggles

[Inaii]

I have a Bissell Powerforce. Got it for about $60 at walmart. If you're not looking for anything special, mine is great. I use it for the floors as well as cleaning out the animal cages.

[SSM_DC5]

http://img.photobucket.com/albums/v704/SSM_DC5/Screenshot_2017-02-05-13-54-17.png

legit cop or impersonator? 4 flashings in the front grill. 2 up top are blue, 2 at the bottom are yellow. nothing flashing in the headlight housing. license plate JK2469

sorry for blurry pic, it's a cropped shot off my dashcam.

[yray]

are those tinted headlights?

I would send it to VPD.

[underscore]

Doesn't seem like enough lights to be legit, I'd call the VPD/RCMP for sure.

[SSM_DC5]

That's a F150 right? What year is it?

[cdizzle_996]

I'd say impersonator for sure.

[6o4__boi]

in for response from VPD
definitely looks like an impersonator


MG1, yeah i was using it with a bag and HEPA filters
it was a good vacuum and had pretty much everything i could want for $30

Will probably go for another canister style/shopvac style cus it's got attachments that make it easier to vacuum stairs. Fucking carpeted stairs...i fucking hate them, they're a fucking pain in the ass to clean. Would probably make a good summer project to work on.

[MG1]

So, my mother-in-law is getting pretty old. She has a freezer full of sockeye salmon. Frozen whole. She says they're pretty old, but I checked last night and they look fine - on the outside. The only way to see if they're not freezer burned is to thaw them. I'm not going to do that, because then I have to dress it and so on. If someone wants to check one out and it is good, you can have the rest of them. Probably 12 large wild sockeye from the mouth of the Fraser (Adams River run). Hand picked and frozen by me on the day or after the day they were caught. I only get sockeye during the Adams River Run years. So they could be 4, 8, or 12 years old. I doubt 16 years, but who knows?

She just wants them out. It would be a shame to throw them out. If nobody wants them, I'll offer it to a mink farm or something........... oh, I hate waste.

RS BBQ!?!?!?!


If you only want one, that's okay, too. You try it and if you stop posting in a day or two, we'll know why, Gulolololololol. If it's good, then everybody else can have one until they're gone. First person to reply or send PM get's choice of taking one, some, or all.



BTW, when I say whole, I mean it has everything on..... not spayed, neutered or otherwise (head, fins, and tail on). Find some roe as a bonus, although sockeye roe is not as good as chum roe.

Disclaimer: Not responsible for death or sickness through consumption of said fish. Take as is. Bait?

[murd0c]

if she wants to get rid of them I would be more then happy to take them off her hands and make indian candy in my smoker in the spring time!

[Razor Ramon HG]

For my sandwiches, I've been buying larger pieces of ham and hand-slicing them instead of buying deli meat (saves quite a lot of money).

Can anyone recommend me a good solid knife? Or something that could help a noob cut thinner slices (electric knife, maybe?) Thought about getting a meat slicer as I've used them before, but it seems a bit overkill.

[MG1]

if she wants to get rid of them I would be more then happy to take them off her hands and make indian candy in my smoker in the spring time!

Good, when can you come by? North Burnaby.

[murd0c]

Good, when can you come by? North Burnaby.

wicked, I will PM you right now.

[punkwax]

I'll miss your avatar, murd0c

[murd0c]

at least I've posted so often that you will always see me around even when I'm dead

[roastpuff]

For my sandwiches, I've been buying larger pieces of ham and hand-slicing them instead of buying deli meat (saves quite a lot of money).

Can anyone recommend me a good solid knife? Or something that could help a noob cut thinner slices (electric knife, maybe?) Thought about getting a meat slicer as I've used them before, but it seems a bit overkill.

Hoo boy, hang on to your wallet. Check this thread out on RS: Where your knives at? (https://www.revscene.net/forums/620633-where-your-knives.html)

TL;DR - Victorinox Fibrox (https://www.amazon.ca/Victorinox-Fibrox-8-Inch-47520-5-2063-20/dp/B000638D32/ref=sr_1_1?ie=UTF8&qid=1486427302&sr=8-1&keywords=fibrox) is always a solid buy, Tojiro DP (https://www.amazon.ca/Tojiro-8-inch-Chefs-Gyuto-Kitchen/dp/B000UAPQGS) if you want to get into Japanese steel knives

[StylinRed]

Just so fucked up... ho gave birth to six kids over the years and hid their bodies in a storage locker

Andrea Giesbrecht guilty of hiding six dead infants in locker - BBC News (http://www.bbc.com/news/world-us-canada-38885375)

[6o4__boi]

^ read that...pretty fucked up shit. Husband had to have been in on it unless he worked away from home all the time or something

how the fuck do you not know your wife is pregnant that many times...was she like morbidly obese or something?

[MG1]

if she wants to get rid of them I would be more then happy to take them off her hands and make indian candy in my smoker in the spring time!

My wife used to make awesome candied salmon. So good that the natives wanted the recipe, lol. The secret is in the use of Mirin (cooking wine). Don't think natives ever used that in their recipes.

She also made salmon fish cakes to die for.

BTW, miscalculated the amount. Close to 30, so once murd0c get's his fill, the rest will be up for grabs.

[Hondaracer]

Don't know if anyone remembers the couch cutting saga I posted a few years back..well had to take it apart again to get it out lol :(

http://i4.photobucket.com/albums/y136/sniperslayer/1954EE87-9691-4889-A817-2048233FD107_zpsta4wnydh.jpg (http://s4.photobucket.com/user/sniperslayer/media/1954EE87-9691-4889-A817-2048233FD107_zpsta4wnydh.jpg.html)

[tegra7]

https://youtu.be/QwcRG2aEi3s

[FLikyo]

For my sandwiches, I've been buying larger pieces of ham and hand-slicing them instead of buying deli meat (saves quite a lot of money).

Can anyone recommend me a good solid knife? Or something that could help a noob cut thinner slices (electric knife, maybe?) Thought about getting a meat slicer as I've used them before, but it seems a bit overkill.

An electric knife is a bit overkill. all you really need a sharp knife, check over at knifewear on main st. They have all sorts of knives to choose from and im pretty sure you'll find something you need.

[fliptuner]

For my sandwiches, I've been buying larger pieces of ham and hand-slicing them instead of buying deli meat (saves quite a lot of money).

Can anyone recommend me a good solid knife? Or something that could help a noob cut thinner slices (electric knife, maybe?) Thought about getting a meat slicer as I've used them before, but it seems a bit overkill.

How about a mandoline?

[MG1]

like this one, gulololol............spelling, close enough for RS.

[GS8]

https://www.youtube.com/watch?v=09s-c2JVI40

This is the song I want to play at my funeral

[StylinRed]

Are Infinitis reliable? im looking at reviews and it doesn't seem like they have a reputation for being reliable at least compared with say Lexus, but i was hoping for some personal experiences by our members?

guess this might be thread worthy... but oh well

[6o4__boi]

which model and year(s) are you looking at?

[Gh0st]

Are Infinitis reliable? im looking at reviews and it doesn't seem like they have a reputation for being reliable at least compared with say Lexus, but i was hoping for some personal experiences by our members?

guess this might be thread worthy... but oh well

Yes, they are very reliable - from my experience:

2004 Nissan Maxima LE - reliable with regular maintenance

2004 Infiniti G35 - reliable with regular maintenance

2004 Infiniti FX45 - reliable with regular maintenance

2010 G37xS - super reliable

2013 G37x - super reliable

2012 FX35 - super reliable

2015 Q50s - super reliable


Maintenance is very fairly priced and most indy mechanics can work on these cars. They are generally very easy to diagnose and repair.

[StylinRed]

which model and year(s) are you looking at?

my mom was looking at getting a new QX70 or the Lexus RX she prefers the looks of the Infiniti, but i read that the Lexus is more reliable and safer so trying to get opinions

Yes, they are very reliable - from my experience:

2004 Nissan Maxima LE - reliable with regular maintenance

2004 Infiniti G35 - reliable with regular maintenance

2004 Infiniti FX45 - reliable with regular maintenance

2010 G37xS - super reliable

2013 G37x - super reliable

2012 FX35 - super reliable

2015 Q50s - super reliable


Maintenance is very fairly priced and most indy mechanics can work on these cars. They are generally very easy to diagnose and repair.

thanks ghost thats a lot of experience with them that you have ^^

[Gh0st]

my mom was looking at getting a new QX70 or the Lexus RX she prefers the looks of the Infiniti, but i read that the Lexus is more reliable and safer so trying to get opinions

thanks ghost thats a lot of experience with them that you have ^^

Ya I know right! Growing up I was more of a Honda/Acura kind of guy (we still have an RSX in the family) but I always loved the look and sound of Infiniti. I sort of got everyone in my family into an Infiniti car lol!

The QX70 you are referring to is the new name for the FX35. They are pretty similar unless some new major technology came out since. My sister and mom were rear ended in the 2012 FX35 and the damage to repair the vehicle was 15k. Thank goodness they came out with minimal injuries. I can't attest to other angles of collision but in this case, the car did its job in protecting the occupants. This happened last summer.

Lexus is without a doubt very reliable much like Infiniti. Japanese makes are just reliable in general and with the new designs of Lexus vehicles, I would not hesitate to buy one.

At this point, I would say it boils down to the driving experience, not safety or reliability. I've driven and been in a passenger of Lexus vehicles. The dang things are smooth and quiet, but lack emotion and character and I just couldn't replicate the drivers feel that I received from Infiniti. Mind you this is subjective.

The Infiniti felt raw, powerful, grunty, and filled with personality which made the overall driving experience fun - for me. And I always felt they looked more aggressive and elegant too. But lately Lexus vehicles have been living up to this statement.

[Inaii]

Recommendations on a decent humidifier? Looking to spend under $50 preferably. It's for a small room so I don't need anything fancy, prefer not to have one that smells like anything (the vicks ones you can put some of the vapo stuff in it iirc)

TIA

[Galactic_Phantom]

Recommendations on a decent humidifier? Looking to spend under $50 preferably. It's for a small room so I don't need anything fancy, prefer not to have one that smells like anything (the vicks ones you can put some of the vapo stuff in it iirc)

TIA
You can always just get a vicks and not put the scent pack in it :badpokerface:

Anybody have a recommendation for a reliable instant read digital meat thermometer that won't die on me quickly?

[PiuYi]

whats the difference between reliable and super reliable? :confused:

[GLOW]

Recommendations on a decent humidifier? Looking to spend under $50 preferably. It's for a small room so I don't need anything fancy, prefer not to have one that smells like anything (the vicks ones you can put some of the vapo stuff in it iirc)

TIA

the vicks one (at least the one i had) cost $2x.00 at superstore and did not have any scent or anything, just add water.

https://s-media-cache-ak0.pinimg.com/originals/9a/c2/82/9ac282316375ffe4cda604784852a700.jpg

tbh i'm a little surprised you need it in our climate. we do not have dry air. our kids needed some moisture in the air in the summer, we just left a bowl of water out and seemed to do the trick so we gave the vicks away. when it's on it has a little motor sound where as a bowl of water is silent :lol

[fliptuner]

That's only cause your walls were moist :troll:

[6o4__boi]

Anybody have a recommendation for a reliable instant read digital meat thermometer that won't die on me quickly?

i found that buying waterproof ones tend to last longer than your average everyday digital meat thermometer so i'd look into those

Amazon probably has a variety

[sonick]

Anybody have a recommendation for a reliable instant read digital meat thermometer that won't die on me quickly?

Thermapen or Thermopop is always top of the list from cooks and cooking websites.

[vitaminG]

Where's a good place to get wool thermals?

[guesswho]

Where's a good place to get wool thermals?

You can try icebreaker merino

[vitaminG]

You can try icebreaker merino

Awesome dude, I went to the McArthurGlen icebreaker outlet and everything was 50% off.

[subordinate]

Awesome dude, I went to the McArthurGlen icebreaker outlet and everything was 50% off.

I was surprised when they had some items cheaper than thelasthunt.com. I mean a lot cheaper!

[Kilinim]

Does anybody have a spare Roam Mobility sim they got via one of their promos that you don't need?

[guesswho]

Awesome dude, I went to the McArthurGlen icebreaker outlet and everything was 50% off.

Glad that worked out for you:thumbsup:

[Presto]

Academy Awards... what a twist!

La La Land for Best Picture, but it was a mistake! Moonlight takes it!

[HonestTea]

^ That was awkward...

[MG1]

Oh shit, it must be over by now......... oh well. I wanted to watch it just for some Trump bashing.

[GLOW]

Academy Awards... what a twist!

La La Land for Best Picture, but it was a mistake! Moonlight takes it!

https://imgflip.com/s/meme/Steve-Harvey.jpg

[H.Specter]

Suggestions on where to buy inline fuses (5a)?

Something like this.

http://www.cooperindustries.com/content/dam/public/bussmann/Electrical/Products/fuse-holders-blocks/Images/BUS_Ele_HHT_220.jpg
http://www.hondagrom.net/forums/attachments/2212d1377685313-battery-maintenance-emergency-jump-inlinefuse_zpsac120ede.jpg

[MG1]

Princess Auto
Lordco
Canadian Tire
Even Walmart


Guaranteed in stock at Princess Auto. If not, I can supply you with one.

[Reeyal]

Princess Auto was where I bought my last inline fuse.

[PiuYi]

Anyone know how to highlight in iBooks? When I select the text there's no option to highlight
Just got an iPad and it feels like a pos already lol or I don't know how to use it

[murd0c]

How to highlight content in a book with iBooks

1.Launch the iBooks app from the Home screen of your iPhone or iPad.
2.Tap the book that you'd like to highlight something in.
3.Find the text you'd like to highlight and hold down on it. ...
4.Tap on the highlight option in the pop-up menu. ...
5.That's it.

[PiuYi]

Copy/Look Up/Search are my only options in the pop-up menu :confused:
I'll go to the iStore and ask one of the guys there

[murd0c]

That's what google said lol

[Hondaracer]

Anyone have experience getting scratches out of stainless?

I installed my new hood fan which had a two peice stainless sleeve to hide the stack, the inner stack got scratched to shit when I finally got it installed :(

They are just micro scratched with no feelable depth but they are super evident cause it's installed right under a light

[6o4__boi]

anyone ever bought tickets from stubhub before?

are you fully protected from fake tickets?

[Spaceship_coupe]

Anyone have experience getting scratches out of stainless?

I installed my new hood fan which had a two peice stainless sleeve to hide the stack, the inner stack got scratched to shit when I finally got it installed :(

They are just micro scratched with no feelable depth but they are super evident cause it's installed right under a light

If it's brushed stainless, you can try fine steel wool grade 0 or very fine steel wool grade 00.

[SSM_DC5]

Anyone know a junkyard with lots of 8th gen civics? Want to pull the aux input off a higher trim to upgrade a DX.

There's a pic of the aux in the link under #16

https://www.cnet.com/roadshow/pictures/2009-honda-civic-lx-s/16/

[underscore]

Try searching car-part or row52.

[GS8]

Reminder to set your clocks ahead an hour tonight to kick off daylight savings time!

Speaking of which...

Why do people bitch about daylight savings time?

I LOVE when the sun sets at 9:00pm in the summertime. I love being outside all the time, staying fit and healthy. I love being on a patio or park table with peeps just chilling till late at night yet still wake up refreshed the next day because the sun is rising earlier.

Finally, being outside for longer means a higher probability of paying for goods and services which is good for our economy.

But, oh no, that one night where we lose an hour of sleep.

[xxxrsxxx]

Can anyone clarify this HOV sign, it's on most of broadway and on Hastings.
Is this lane purely for bus? Because typically if it allows cars, it will show a picture of a car with the number of people allowed. However i still see quite a few people driving in this lane.

[SSM_DC5]

On Monday to Friday during 0700-0930, this lane is for buses and bicycles only.

[Jmac]

Buses or bicycles only from 7-9:30 Mon-Fri

[xxxrsxxx]

yeah, that's what I figured. Still see people in that lane during 7-9:30 Mon-Fri (and not making a right turn)

[EX-R]

Anyone know a place where I can sell old collectable toys? I don't really want to make the effort to try to sell them on Craigslist. I would prefer to be able to bring them somewhere and just sell them even at a lower price.

[racerman88]

Anyone know a place where I can sell old collectable toys? I don't really want to make the effort to try to sell them on Craigslist. I would prefer to be able to bring them somewhere and just sell them even at a lower price.



What kind of toys?
If they are Transformers, I have a buddy that might be interested


Sent from my iPhone using Tapatalk

[Klondike]

What kind of toys?
If they are Transformers, I have a buddy that might be interested


Sent from my iPhone using Tapatalk

http://i.imgur.com/37nwvTH.png
http://i1.kym-cdn.com/photos/images/facebook/001/160/020/0b2.jpg

[GLOW]

doesn't Ages 3+ and Up across from Lougheed Mall in Burnaby in that strip mall do that type of thing?

[PiuYi]

Toy shop on south Granville/70th might?

[Bouncing Bettys]

Anyone know a place where I can sell old collectable toys? I don't really want to make the effort to try to sell them on Craigslist. I would prefer to be able to bring them somewhere and just sell them even at a lower price.

https://figurinett.files.wordpress.com/2015/02/121008_bachpad.jpg
http://themoviedistrict.com/wp-content/uploads/2013/10/the40yearoldvirgin06.jpg

[Inaii]

Anyone know a place where I can sell old collectable toys? I don't really want to make the effort to try to sell them on Craigslist. I would prefer to be able to bring them somewhere and just sell them even at a lower price.

Try Toy Traders out in Langley

[EX-R]

Thanks guys! ill give those places a shot.

[Armind]

What are some pimp ass plants for a bachelor's pad and where can I get em?

[6o4__boi]

What are some pimp ass plants for a bachelor's pad and where can I get em?

https://vancouverseedbank.ca

[Gerbs]

What should I replace my beyond repair flat tire with? I think the other 3 are at around 65% left. Should I just grab any tire at 65% and mount it on? It's just for the beater car.

[godwin]

What kind of car? On the drive axles?

Honestly I don't think it matters very much, unless you do a lot of peeling off and hard cornering.. that's where the definition of "beater" comes into play. I have to say I am harder on my beaters than on my daily cars.

What should I replace my beyond repair flat tire with? I think the other 3 are at around 65% left. Should I just grab any tire at 65% and mount it on? It's just for the beater car.

[european]

Looking for a nintendo switch has anyone come across any in stores?
(I know its a very hot item right now and mostly sold out everywhere but there might be some new ones out there already. Been calling every store and every location within a 100km radius, thought I'd ask RS too)

[Hondaracer]

Anyone do lawn aeration or know someone who does?

Ideally I'd pay the kid walking the neighborhood but haven't seen anyone around yet. Located in east van

[k3mps]

What should I replace my beyond repair flat tire with? I think the other 3 are at around 65% left. Should I just grab any tire at 65% and mount it on? It's just for the beater car.

yes. if it's fwd, move the non-matching tire to the back and you kinda want it to have a similar tread pattern, especially if the other tires are rotational

[Gerbs]

What kind of car? On the drive axles?

Honestly I don't think it matters very much, unless you do a lot of peeling off and hard cornering.. that's where the definition of "beater" comes into play. I have to say I am harder on my beaters than on my daily cars.

2000 Corolla, rear passenger tire. Luckily not the front, currently on the spare tire atm.

[godwin]

Depending on size 15/16 inches tires aren't that much when they go on sale.. it would be worth while just get the pair changed.

2000 Corolla, rear passenger tire. Luckily not the front, currently on the spare tire atm.

[Jmac]

What do you guys think of the new Cruze diesel? New version gets a 6-speed. Obviously, VW is out of the diesel game for the forseeable future. Any other players? Don't want a CVT/Auto, so that leaves pretty much all the hybrids out (except the CR-Z). EV not an option because I have no charging option at home or work.

I'm driving 35,000 km/year, 90% highway, and my BMW is starting to close in on 200,000 km and is costing me around $4500/year in fuel (91 octane). Starting to think it might be a good idea to pass it on to le fiance (who does like 15,000 km/year) and trade her Versa in on a new car for moi.

[fliptuner]

Happy March 14th, boys!!!

[Fafine]

Anyone got a recommendation to a company or person that cuts down trees?
only need 1 tree chopped down and they wont need to dispose of it, just chops it down and into pieces.

[A-Dev]

Did revscene get any promo codes for discounted Vancouver International Auto Show tickets this year?

Does anyone know of any active promo codes?

Muchas gracias

[fliptuner]

Heartbreaking :tears:

?He?s in survival mode?: Child forced to leave foster parents who?d raised him since birth | Globalnews.ca (http://globalnews.ca/news/3313434/bc-child-forced-to-leave-foster-parents-sent-back-to-birthmother/)

[tegra7]

Overnight crash in Burnaby kills 2, shuts down part of Canada Way - British Columbia - CBC News (http://www.cbc.ca/beta/news/canada/british-columbia/burnaby-canada-way-overnight-crash-1.4027505)


Fatal crash on Canada way early this morning, looks like an old Impreza judging by the wheels.

[StylinRed]

Teacher is all smiles for her mugshot after turning herself in for having a sexualizing relationship with a 17yr old... Could u imagine a male teacher being all smiles like that?

https://d.ibtimes.co.uk/en/full/1601095/sarah-fowlkes.jpg
https://amp.ibtimes.co.uk/texas-teacher-grins-mugshot-after-being-arrested-sexual-relationship-student-1612955

[6o4__boi]

^^^^^

https://www.youtube.com/watch?v=lQlIhraqL7o

[fliptuner]

Shitty.

https://youtu.be/8IB15T1LYiY

[Inaii]

If anyone is looking for cheap oil, lordco is blowing out Quaker State. All quarts of any weight are $1.99 and all jugs are $8.99. This is ONLY for Quaker State.

[fliptuner]

All locations?

[Inaii]

Yep. Can't promise there will be much stock if you're looking for a popular number

[fliptuner]

110 bottles later lol

Included all their gear oil, ATF and synthetics

[whitev70r]

What do you guys think of the new Cruze diesel? New version gets a 6-speed. Obviously, VW is out of the diesel game for the forseeable future. Any other players? Don't want a CVT/Auto, so that leaves pretty much all the hybrids out (except the CR-Z). EV not an option because I have no charging option at home or work.

I'm driving 35,000 km/year, 90% highway, and my BMW is starting to close in on 200,000 km and is costing me around $4500/year in fuel (91 octane). Starting to think it might be a good idea to pass it on to le fiance (who does like 15,000 km/year) and trade her Versa in on a new car for moi.

Have you looked at the BMW 335d diesel since you currently drive BMW?
https://vancouver.craigslist.ca/bnc/ctd/6032948030.html

And I came across a VW Jetta hybrid on CL recently, 2013 ish, it has DSG.
https://vancouver.craigslist.ca/van/ctd/6047901328.html

[6o4__boi]

Ikea doesn't have $1 breakfast anymore

i went there on sunday...it's been replaced with a $2.49 and $2.99 breakfast plate

[Presto]

I want to remove a programmable timer from a circuit. It's supposed to control the fan in the bathroom. There are 3 wires that connect to the timer: Load (Blue), Line (Black), Neutral (White).

I've found the corresponding breaker switch. Physically removing the timer is easy. Do I need to connect the existing wires? Which ones? Should I just leave it?

[coneZONE]

I want to remove a programmable timer from a circuit. It's supposed to control the fan in the bathroom. There are 3 wires that connect to the timer: Load (Blue), Line (Black), Neutral (White).

I've found the corresponding breaker switch. Physically removing the timer is easy. Do I need to connect the existing wires? Which ones? Should I just leave it?

Is the timer switch the sole control for the fan? or is there another bypass on/off? And assuming it's 120V at home? Wish you had a pic lol

If it's the only switch for the fan, just remove it and install a single pole switch between the blue (load) and black (line/supply) wires.
The neutral should just be there to complete the circuit to allow the timer electronics to operate, you would just cap it off with a wire nut.
If you straight up connect the blue and black wires your fan would be on 24/7 lol.

[twitchyzero]

Purolator has stopped taking parcels before the strike is on
the guys that botched up my address and randomly made up a postal code DansGame

[GLOW]

Ikea doesn't have $1 breakfast anymore

i went there on sunday...it's been replaced with a $2.49 and $2.99 breakfast plate

0:05

http://www.youtube.com/watch?v=-9Nw4DM-yck

[ForbiddenX]

Anyone have a insurance adviser they could recommend? Looking at switching over from our scotia mortgage insurance to life insurance.

[TOS'd]

Anyone know where to get something like this:

https://images-na.ssl-images-amazon.com/images/I/41lVDwCwIYL.jpg

https://www.amazon.ca/STANLEY-30397-Polarized-Grounded-Converter/dp/B00ALSMGNK/ref=sr_1_14?ie=UTF8&qid=1491428951&sr=8-14&keywords=grounded+adapter+tap


Additional picture:

http://www.cablewholesale.com/prodimages/30w1-32210.jpg

Converts a 3 prong plug to a 2 prong one. No time for online delivery, need to be from a brick and mortar store tomorrow. Any electronic stores might have?

[punkwax]

Maybe find a cheap power bar that will do it? Might be your best option for quick local source.. not 100% certain but think I've seen at Walmart in the past.

[murd0c]

try the source or maybe even home depot

[jing]

Just get a pair of pliers and rip out the bottom prong

[Klondike]

Find one at the dollar store, rip out the bottom prong.

Our old bathroom had an old school razor outlet, so we bought a 1 outlet to 3 from the dollar store and modified it so it would fit in the old school outlet.

http://www.homedepot.com/catalog/productImages/400/1f/1f1756ae-5226-4545-a0f9-18d138efa7a3_400.jpg

http://www.electrical-online.com/wp-content/uploads/2012/01/101_0139.jpg

When we renovated the bathroom, we replaced it with a modern GFCI.

[SFU_wmc]

Anyone have a insurance adviser they could recommend? Looking at switching over from our scotia mortgage insurance to life insurance.

PM.ed

[Presto]

Canned Dolmades (Grapevine leaves stuffed with rice and ground beef).

How are they compared to the Dolmades that you get in the restaurant?

Is there a recommended brand?

If I want to order a bunch, what's the best way? Restaurants I've called charge menu price for the number of platters it takes for the quantity I want.


EDIT: I went to the local Greek market and picked up a can of Krinos Papa John. 4 bucks for 400g/12 pieces. For a canned product, it's pretty good. There's no ground beef, but I'd rather brown my own than fatty canned cow. It's kept in olive oil, so i placed a piece on toast to let it soak into the bread. Straight from the can is decent. It's even better when it's warm.

[turbomelon]

https://i.kinja-img.com/gawker-media/image/upload/s--cQ8j1qCP--/c_scale,fl_progressive,q_80,w_1600/cvebit4ozfmllfiruvwd.jpg

Can anyone identify these wheels? I'm thinking they're Rotiform vce but not sure. Can anyone help confirm?

[PiuYi]

https://youtu.be/mIBXlZ2xuLo

Kinda want

[B!tch]

Hey. I don't login or post often but I do read a few threads regularly anD haven't seen MG1 post in the last month. Anyone know if he is Ok?

[fliptuner]

He's on a time-out

[Inaii]

Self-imposed or did he post something naughty in chat again

[underscore]

Does anyone know if Bilstein struts need to be unlocked before assembling them? The ones I just got weren't banded for shipping and they seem really short compared to the springs. They're 4600s if that matters.

Converts a 3 prong plug to a 2 prong one.

Ground wires exist for a reason, disabling them is like making an extension cord that's male at both ends.

[BillyBishop]

It seems like I'm searching for a unicorn here, can anyone help me out?

Looking for a bluetooth keyboard that is full sized, non-chiclet keys, and has a numpad. I would prefer to not deal with USB dongles, hence the bluetooth.

[Jmac]

I have one that I've had for close to 10 years.

https://www.amazon.ca/Logitech-Wireless-Desktop-Laser-Keyboard/dp/B000AY5ZIS

Not aware of anything new that's similar.

Edit: Actually, I have this one (newer version) - https://www.amazon.ca/Logitech-Cordless-Revolution-Discontinued-Manufacturer/dp/B0011FQUQG

[Cr33pUh]

Quick question about this intersection:
https://www.google.ca/maps/place/Rupert+St+%26+BC+Pkwy+%26+Vanness+Ave,+Vancouver,+ BC/@49.2406573,-123.0377637,3a,60y,281.04h,84t/data=!3m7!1e1!3m5!1s0QhicHBYPYh85vT_77p3gw!2e0!6s% 2F%2Fgeo0.ggpht.com%2Fcbk%3Fpanoid%3D0QhicHBYPYh85 vT_77p3gw%26output%3Dthumbnail%26cb_client%3Dsearc h.TACTILE.gps%26thumb%3D2%26w%3D86%26h%3D86%26yaw% 3D31.20603%26pitch%3D0%26thumbfov%3D100!7i13312!8i 6656!4m5!3m4!1s0x54867695eb78e407:0x34b2094811655f 79!8m2!3d49.2406913!4d-123.0377281!6m1!1e1

When there's 1 car each at opposing stop sign on Vanness and its green on Rupert, its standard "stop intersection" procedure where first person to arrive gets to go first unless its safe to do so for other driver. Is this correct?

What if its red on Rupert? Is it still the standard stop sign intersection procedure where its alternating cars going?

I've been going in this intersection lots lately and rules don't seem to apply when its red on rupert...

[inv4zn]

Quick question about this intersection:
https://www.google.ca/maps/place/Rupert+St+%26+BC+Pkwy+%26+Vanness+Ave,+Vancouver,+ BC/@49.2406573,-123.0377637,3a,60y,281.04h,84t/data=!3m7!1e1!3m5!1s0QhicHBYPYh85vT_77p3gw!2e0!6s% 2F%2Fgeo0.ggpht.com%2Fcbk%3Fpanoid%3D0QhicHBYPYh85 vT_77p3gw%26output%3Dthumbnail%26cb_client%3Dsearc h.TACTILE.gps%26thumb%3D2%26w%3D86%26h%3D86%26yaw% 3D31.20603%26pitch%3D0%26thumbfov%3D100!7i13312!8i 6656!4m5!3m4!1s0x54867695eb78e407:0x34b2094811655f 79!8m2!3d49.2406913!4d-123.0377281!6m1!1e1

When there's 1 car each at opposing stop sign on Vanness and its green on Rupert, its standard "stop intersection" procedure where first person to arrive gets to go first unless its safe to do so for other driver. Is this correct?

What if its red on Rupert? Is it still the standard stop sign intersection procedure where its alternating cars going?

I've been going in this intersection lots lately and rules don't seem to apply when its red on rupert...

At regular 2-way stop signs, it's not whoever arrives first - it's whoever (I'm paraphrasing here) does the less dangerous manoever. Essentially anyone turning left from a 2-way stop sign has the last right of way.

http://www.icbc.com/driver-licensing/Documents/drivers4.pdf - bottom of P.45

Unfortunately not many people follow this so you just gotta judge and be careful.

[jing]

Anyone selling Cineplex movie tickets? I only need a few for a raffle I'm hosting.

[jeedee]

Quick question about this intersection:
https://www.google.ca/maps/place/Rupert+St+%26+BC+Pkwy+%26+Vanness+Ave,+Vancouver,+ BC/@49.2406573,-123.0377637,3a,60y,281.04h,84t/data=!3m7!1e1!3m5!1s0QhicHBYPYh85vT_77p3gw!2e0!6s% 2F%2Fgeo0.ggpht.com%2Fcbk%3Fpanoid%3D0QhicHBYPYh85 vT_77p3gw%26output%3Dthumbnail%26cb_client%3Dsearc h.TACTILE.gps%26thumb%3D2%26w%3D86%26h%3D86%26yaw% 3D31.20603%26pitch%3D0%26thumbfov%3D100!7i13312!8i 6656!4m5!3m4!1s0x54867695eb78e407:0x34b2094811655f 79!8m2!3d49.2406913!4d-123.0377281!6m1!1e1

When there's 1 car each at opposing stop sign on Vanness and its green on Rupert, its standard "stop intersection" procedure where first person to arrive gets to go first unless its safe to do so for other driver. Is this correct?

What if its red on Rupert? Is it still the standard stop sign intersection procedure where its alternating cars going?

I've been going in this intersection lots lately and rules don't seem to apply when its red on rupert...

why would it be alternating cars going? it's not a 4-way intersection... like inv4zn said, anyone turning left has the last right of way

[JSALES]

My desktop computer died on me, any recommendations where to bring it to retrieve the data from my hard drive?

[xxxrsxxx]

Take out the hard drive and put it in an external enclosure.
You can then access it yourself.

[FerrariEnzo]

https://www.youtube.com/watch?v=WoNAt9bQZtY

[stewie]

Anyone happen to notice a rather large accident at Kensington and Canada way in Burnaby yesterday around 5pm? Mustve been 10+ cop cars + undercover cars/suv's and a car that was completely crushed from driving into a pole. The weird part is that for the amount of damage to the car it seems odd that he could've been going that fast in such a short distance unless he was going well over 100kmph+ on such a busy road in rush hour traffic to have the front of the bumper crushed to the point it was at. Drove past and 1 guy was sitting on the ground with blood running down his face while the passenger laid flat on the ground completely covered in blood and wasn't moving. Cops were acting like they didn't even care about trying to at least comfort the guys...unless the one guy was laid out flat on the ground dead....

On my dash cam when driving past you can see both guys but since it was raining its not the best visibility :(


I cant find anything about it...anyone know what happened?

What strikes me is that when I first got there I had waited a while before finally being able to drive past and there were no ambulances or fire trucks there even though they are literally behind Burnabys #1 fire hall...which they could've walked or ran to within a minute.

Drove past it again around midnight and cops were still there taking photographs.

Take down?

Wasnt a single thing about it that I could find on the news or online about it.

[6o4__boi]

The weird part is that for the amount of damage to the car it seems odd that he could've been going that fast in such a short distance unless he was going well over 100kmph+ on such a busy road in rush hour traffic to have the front of the bumper crushed to the point it was at.

Cops were acting like they didn't even care about trying to at least comfort the guys...unless the one guy was laid out flat on the ground dead....



the last thing i'd wanna do is comfort a total fucking moron for pulling that shit in such a busy setting to begin with

act like an idiot, get treated like one.

without picture of the actual damage, i can only take your word on it. But if it's mangled that bad, chances are, he's one of those idiots who rip through Canada Way like they're trying to win Darwin awards.